Time Capsule has a little lock on it, getting permission error now.

I just added a Mac Mini to my home network. I used my TC to move files and now want to create a Time Machine backup for my Mini on my TC. But... I now get an error that I cannot do this because I do not have the necessary read write append privileges on the network backup disk. There also appears to be a little padlock on the image of the network drive. Sharing and permissions indicate that "everyone" has no access, and if I try to add me as owner, it says I am not a recognized account. Any idea where to look for answers? I find similar questions to this, but all unanswered on the forum. Any help would be appreciated.

Unable to activate can mean the phone is jailbroken, or the computer used to restore it has been used to jailbreak a phone at some time in the past, or your antivirus or firewall is blocking access to gs.apple.com. It can also mean that the phone is locked to a carrier and the SIM in the phone is not from that carrier.

Similar Messages

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

I need to reset my time capsule/airport every day - time capsule has green light but I don't see any wifi signal on my mac and other computers.

as many of you do, I use time capsule as airport, too...
It worked fine for 6 months or so after I bought the new time capsule. (I bought it in September 2012.)
Since the beginning of this year, I had to reset, and power off and plug it in almost every week, then now I need to reset and power off and back on again every day...
When I first set up the time capsule, I followed the instruction with the manual.
But, now I am so lost and don't want to reset every day for wifi connection.
Anyone has problem like me or knows how to solve this issue?
Please help..
I have MacBook Pro OS X 10.8.4 & my roommates have PCs. (just in case if it helps...)

For PC it is important the wireless has names that are compatible.. short.. like 10 characters.. but 2-20 is fine. no spaces.. and pure alphanumeric.
Use WPA2 personal only.. with pure alphanumeric password .. again 10-20 characters should be fine.
The latest firmware is a dud. Go back to 7.6.1
Open the airport utility.. click on the TC and holding the option key click the actual version number..
Go back to 7.6.1 is simple.. just select it and away it will go.. ignore future requests for upgrade.. you can also tell the utility not to check weekly for updates. You will need 5.6 utility for this I think..
So do the firmware downgrade.
Then do a factory reset and follow the name information above.. for TC name as well btw.. wireless name/s and disk share name.. which by default is data and that is fine.
So some instructions in...
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
Leave the package open on the desktop so you can see the file. AirportUtility56.pkg
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. If your Mac refuses to run the software, because it wasn’t downloaded from the Apple store, go to security in preferences and allow other software to work.. this is limitation of trade methinks. You can set back later if you like.
Now drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. in finder, open the new directory, drill down.. applications, utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall version 6 (now 6.3 if you updated) so don't try.. and you cannot or should not run them both at the same time.. although I have had no problems when doing so.
You can also load airport utility into a pc and get access to all the settings. Untick the box for firmware updates.. it will still bug you occasionally.. regardless of the setting.. just ignore it..
You might still need to do the occasional reboot of the TC as well.

Time Capsule has limited range - Airport Extreme worked fine. Solutions???

I have used Airport Express with my 2 Macs - Mac Pro (near the AE and modem, and MacBook Pro, normally used about 25 feet away, in another room. No problems. UNTIL I added Time Capsule. My access to the internet on the laptop is very, very slow. So bad, in fact, that I unplugged the TC, and am now using the AE once again. I really need to have everything backed up, which is why I bought the 2TB Time Capsule. Does anyone have solutions for this?

Duane:
I'm getting closer, but still have a problem.
AE has only one channel to work with, and it's set on Channel 1.
However, Time Capsule has two radio channel selections. The 2.4 GHz channel can be set on Channel 1, which I have done. But the 5 GHz channel 36, 40, 44, 48, 149, 153, 157, 161
I'm going through trial and error with the higher number channels, but have had no success when I move the laptop away from the Time Capsule unit.

My Time Capsule has quit backing up - now spends all it's time "preparing". I've tried the Apple suggestion of a reset which does not help. All indicators seems to be OK. Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe. Any ideas?

My Time Capsule has quit backing up - now spends all it's time "preparing". I've tried the Apple suggestion of a reset which does not help. All indicators seems to be OK. Running OS 10.5.8 on G4 Powerbook, Time capule is 1st gen I believe. Any ideas?

Hello,
Thanks for your message, I have attempted to repait the permissions as tou suggested. The first time this produced a long list of exceptions and took quite a while, however although it said "Permissions repair Complete" when I ran it again there were still about 20 exceptions, I have repeated the procedure and this is unchanged. The Time Capsule now does not spend hours "Preparing", but the backup attempt fails after a few minutes with the error message "The backup volume could not be mounted." Any further ideas would be appreciated. When I use Disk Utility I can't see the Time Capsule volume, if I could I'd be tempted to re-format it and start from scratch.

HT3728 Time capsule has lost power, how do i repair this & recover the files?

The time capsule has lost power, isthere away to reset this so it will operate again, where can i get it repaired if not & can i recoverthe files?

So the TC is dead.. ie no lights on. no body home??
When you plug the power in, look closely at the front and ethernet leds.. do any flash.. or all dead?
Apple will not repair them. If you have applecare on a computer it will be replaced.
Files can be recovered by voiding the warranty and removing the hard disk.. place in usb holder and plug into the computer.
http://www.ifixit.com/Device/Apple_Time_Capsule
Gen3 if yours is A1355 is probably shorted board .. not a power supply gone bad.. although a repairer would need to look at it.
Here is the repair instructions for A1355 I did.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
AFAIK at this point Chris in the UK, and myself in Australia are the only people crazy enough to do it.
If you have an electronics repair type he might help you. It is easy to do.. and so far very successful.. and once fixed have remained good. Happy to give more info if you contact me direct.
If you check the rubber foot and it is earlier model then it is just a dead power supply.
Apple and the apple repair network will throw it away if not under warranty.. if it is under warranty they will still throw it away just they will give you a replacement.

My time capsule has stopped working.

My time capsule has stopped working. I get following error message The backup disk image “/Volumes/Michael Campbell's Time Cap/iMac.sparsebundle” could not be accessed (error -1). I tried everything including deleting all the data and starting again. It then works for a few back ups and then gives the error message. I have tried to repair the disk but that is grayed out.

Found this elsewhere so I will try it
Go to App folder
Open Utilities
Click on AirPort Utility
Highlight your Time Capsule
Go to Manual Setup
Click on Disks
Highlight your Time Capsule
Click on Disconnect All Users
Close AirPort Utility
Go to Systems Preferences
Click on Time Machine
Click on Select Disk
Find your Time Capsule and highlight it
Then click on USE BACKUP DISK.
Go to the Menu Bar and click on the Time Machine Icon
Click on Backup Now
It should work

My time capsule has been "preparing" for days--what to do???

My time capsule has been "preparing" for days--what to do???

See # D1 in Pondini's excellent Time Machine - Troubleshooting guide.
http://web.me.com/pondini/Time_Machine/Troubleshooting.html

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image "/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX's MacBook Air.sparsebundle" is already in use." Same time capsule has worked in the past.

I am getting this error when time machine tries to back up to a time capsule. "The backup disk image “/Volumes/JUDY ARCENEAUX's Time Capsu-1/JUDY ARCENEAUX’s MacBook Air.sparsebundle” is already in use." Same time capsule has worked in the past.

First, restart the computer and the Time Capsule. In most of the cases, this should solve the problem.
If it doesn't work, see > http://pondini.org/TM/C12.html

I have more ethernet devices than my time capsule has ethernet output ports. What do I do?

I have more ethernet devices than my apple time capsule has ethernet output ports. What do I do?

Just to add to Bob's comment.. it is much better to move all the connections to the switch..
Don't leave two connections on the TC and then connection to the switch plus the rest.. plug everything into the switch. The only line running to the TC is to connect switch to TC.
The sweet spot for most people is 8 port switches which are now consumer items.. go into any big computer shop.. buy whatever brand you want.. they are not alot different.. but I have noticed smart switches are coming down in price.. to the point cheap end 8 port smart (managed sort of). are the price of dumb switches a year ago.. they also will have better controls and more details. ie discover what is using bandwidth in the network.. some basic QoS .. lots of stuff that Apple routers missed out on.
eg d-link DGS-1100-08
I just bought one to replace my power hungry managed 16 port switch.. although I haven't unboxed it .. sometimes things don't work 100% on Macs but most have simple browser type access. Not all browsers work is my experience but something always does.

Time Capsule has green light, but unable to access the internet

My Time Capsule has a green light, but all devices (wired and wireless) are not allowed out to the internet.
When I connect my iMac directly to my internet router, I am able to access the internet, so I have isolated the issue to the Time Capsule.
The Time Capsule receives an IP address from my internet router via DHCP and I can see this address in the Time Capsule config, but for some reason the Time Capsule is not allowing internet access to both wired and wireless clients.
Thank you.
--SN124B

Verify that you have a working Ethernet cable.
Then verify that the Ethernet cable is connected from one of the LAN <-> ports on your main router to the WAN "O" port on the Time Capsule.
Check again to make sure that the Time Capsule is configured in Bridge Mode
Power cycle the entire network as follows:
Power off all devices in any order you want
Wait a few minutes
Start the modem or modem/router first and let it run a full minute by itself
Start the main router next the same way
Start the Time Capsule the same way
Continue starting devices one at a time until everything is powered back up
Check the network

My time capsule has no wifi or lights on but the hard drive is running

CCan any one help please? My time capsule has stopped working, there are no lights being displayed on the unit and there is no wifi output, but I can hear the hard drive running.

Check on the bottom for the model number.. A1409.
This is a standard failure for this model.. you are experiencing the wonders of TC build quality.
If at all possible get apple to replace it. I generally cannot repair this model.. the issue is faulty board.. but you can have a go.. if warranty / applecare is impossible.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/gen4-a1409-i…

Time capsule has flashing orange light? Anyone help please?

Time capsule has flashing orange light and iMac is saying 'backups delayed'? Anyone help please?

Just do a reboot of the TC to start with.. followed by a full network restart.. ie with everything off.. power on in order.. modem.. TC.. clients with 2min gap.
If that doesn't fix it.. you should do a reset of the TC and set it up again.
Tell us more if you still have issues.
Full network layout.
OS you are running.
Firmware on the TC.

Airport Time Capsule has no IP address

I just moved to Massachusetts and the Comcast technician who installed my tv/phone/internet package did not install my time capsule properly, or so it seems. He said he would use a standard protocol for installing it but was not sure it would work. It didn't, and the orange light on the front of the time capsule has been flashing now for 48 hours. Also, through Airport Utility I learn it "has no IP address". I might mention the Bright House technician in Palm Coast (FL) and in the AT&T technician in Jacksonville had no trouble getting it to work
I hasten to add this may not be Comcast's fault. I dropped the time capsule from 3 feet onto the floor as I was taking it out of its box. I would be most grateful, assuming it survived the fall, if anyone could suggest how I might get it to work.
Regards.

Reset it to factory and start again.
Make sure it is plugged into the main ATT router by ethernet to its WAN port.. ie the one with the circle symbol. (always nearest the power socket).
Now use airport utility and try again.. the airport utility on iOS device is more reliable than Yosemite.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.

How can I be sure that the back up to my time capsule has backed everything up as when I enter time capsule and interogate the back ups i can't identify individual music or picture files?

How can I confirm that the back up to my time capsule has backed everything up as when I enter time capsule and interrogate the backs ups I can't identify individual photo or music files?

You cannot browse a Time Machine backup with the Finder. To restore individual music files or any other files normally available in the Finder, open your Music folder then "Enter Time Machine" using the Time Machine icon.
Restoring individual photographs is slightly more cumbersome. Apple recommends restoring the entire iPhoto Library, but if you want to locate an individual photograph you could use Time Machine to restore the old Libary. Restore it to an alternate location to avoid overwriting your existing one. Open iPhoto while holding an Option key, open the restored Library, find the photo you need and export it, close iPhoto, re-open it with your usual Library, and import the photo.
Time Machine depends upon a number of sound engineering principles for reliable operation, one of which is "faith"
Your files will remain intact until your Time Machine backup device becomes inoperative.

Time Capsule has a little lock on it, getting permission error now.

Similar Messages

Maybe you are looking for