Time Capsule - Internet and Printer Fine - Disk Not Available
I have a 1 TB Time Capsule with an external drive and printer connected to it. Internet access works fine as does the printer. From time to time, I cannot connect to the Time Capsule disk or the external disk. I also cannot connect to the time capsule itself using the Airport Utility. If I unplug and restart the Time Capsule, everything is accessible and works fine. Then, a day or two later, I cannot connect.
Any ideas welcome!
Thanks... JRMjr
I have consistantly had this problem.
Time Machine could not complete the backup.
The backup disk could not be found.
Make sure the backup disk is connected or open the Time Machine preferences to select a different backup disk.
If I unplug it and plug it back in it will probably work, although I have had to totally start from scratch a couple times to get it working.
Is this a DHCP issue or how can I avoid this in the future?
Thanks,
Similar Messages
-
My MacbookPro is only 5 months old and in really good condition. The only problem I am encountering is that when I insert any type of dvd disc, it starts to make this weird grinding noise that goes eeee-eeee, and then does that a couple of times and then the disc ejects on its own. When i try to play it with idvd, it does the same noise thing and then iDvd state "supported disk not available". The dvd does not even read on the computer.
If only five months old it is still under warranty. Take it back.
-
Cannot access time machine, backup disk not available error code.
My time machine stopped backing up. It is a 2TB. I get error code -6584. and says backup disk not available. Coincidentally, I had to reset my time machine for a forgotten password about 6 days ago. Wi-fi works fine, but a few days later when trying to access old files throughout the time capsule I could not. Said my last back up was the day the time machine had to be reset. I have 1.79 of TB used..which is weird my computer is only 4 G and have only filled up 2.4 G of it.
ANy ideas?We haven't seen report of problem with 6584 for a while. It generally means a corrupted backup. You need to do a verify of the back.
See A5 here. http://pondini.org/TM/Troubleshooting.html
This will take a very very long time if the backup has almost filled the TC.. so at least use ethernet connection.
You do have a problem.. the formatted capacity of a 2TB disk is 1.8TB.. If you have used up 1.79TB then sorry but you really need to erase the TC and start over.
The TM can fill up huge disks if you use parallels or dropbox or any dual boot system that has a virtual disk file.. TM will backup 20GB for every 1KB change. That file is hidden btw so you might not see it but I assure you it will chew up space.
I don't know what you mean by computer having only 4GB. That would make it rather ancient.. Surely even smallest SSD must be 64 or 128GB. -
My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?
You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location. -
My time capsule worked for several weeks and now is not backing up. Tells me backup disk not available? Any suggestions?
This is a lion bug..
Generally just rebooting the TC will get it back. Otherwise you need to reset the TC and redo its setup.
Tell us a bit more.. but there is as yet no work around or fix for lion.
Certain things help.. but wireless is also a weak link. It will generally work better by ethernet.
Try and get back if it is still bugging you.. I can suggest some other things.. but I do not know of or read a bullet yet.
(Snow and TC firmware 7.5.2 which I run do not have this issue.. so the bug was introduced with Lion and 7.6 firmware) -
Need assistance with my Porsche Design LaCie Time Capsule... It is not operating at all.. I have ran the diagnostic via the Disk Utility and under the error reading it runs the repair and then says it not about to repair what do I do... Thanks
LaCie doesnt make ANYTHING. It contains a Seagate 3.5" 5400RPM HD.
Check the HD on another computer, if nothing, your SATA bridge is fried, or the HD (very unlikely since its a Seagate inside)
Youd have to crack open the HD, remove the SATA bridge cart thats plugged into the HD and put the HD into an enclosure or a HD dock to get the data
those external HD use a 50 cent SATA bridge famous for failing. The curse of all the good HD externals is the junk 3rd party SATA bridges attached to them that crash and burn.
Sata bridge: -
How to use time capsule for wireless back-up but not internet?
Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible. -
Purchased a new Macbook Pro 13". I used migration assistant to transfer. I can't backup to time capsule. I am getting on error "The backup disk image “/Volumes/Herb's Time Capsul/Herb MacBook Pro.sparsebundle” could not be created (error 17). Help!
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the page that opens.
Select the System keychain in the list of keychains in the sidebar of the window. If you don't see the list, click the down-arrow icon below the sidebar.
Then select Passwords in the Category list at lower left. Click the Kind heading in the list of keychain items to arrange it by Kind.
Locate the AirPort Disk Password with the name of your Time Capsule. Double-click the item and check the box marked Show Password in the inspector window that opens. You'll be prompted for the administrator login password. Make a note of the AirPort password, then close the inspector window and delete the item.
Also delete any other AirPort DIsk Password items for that same Time Capsule, which may have had a different name in the past.
Quit Keychain Access and try again to back up. -
Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
How can I fix it?You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
See # C17 -
Time Capsule Internet not working through direct ethernet in Apartment
Hi all,
I got my new time capsule yesterday and tried to set it up. The internet in my apartment is supplied to the apartment complex so we access it through an ethernet port directly (there is no modem). Can the time capsule share this connection wirelessly by connecting directly to the ethernet port in the wall?
I tested yesterday but it wouldn't work. The light was green on the TC and it seemed to think it had a net connection (didn't prompt connection error and it also showed IP address plus DNS servers). The problem is, it doesn't work... I try on my macbook and no internet connection can be made. From the TC menu i also try to update firmware but it tells me it cannot connect.
Any ideas? Should i manually apply a new firmware to see if it will help?
Many thanks!The Time Capsule defaults to sharing one IP address with several computers, which is what you usually need when you connect to a cable or dsl modem. It sounds like your apartment complex is supplying this as well as a dhcp server as well. This could be a problem with double NAT. You should set your Time Capsule to work in bridge mode instead and see if that works.
Airport Utility ->Internet->Internet Connection->Connection Sharing: Off (Bridge Mode) -
Airport Utility can't find Time Capsule but wireless is fine
Hi
I have my Time Capsule connected via cable to my NetGear Modem/Router and have wireless enabled on the Time Capsule.
I never have any problems with the actual wireless connections to the internet via any of our Macs or PCs in the house, but on a fairly regular basis, the AirPort Utility comes up and tells me 'AirPort Utility was unable to find any apple wireless devices. Please make sure the Apple wireless device you want to set up is plugged in and in range of your computer, and then click rescan to try again.'
Wireless access continues to work just fine when this happens, but I just can't get to the Time Capsule with the Airport Utility. Un-plugging and re-plugging the Time Capsule makes it appear in the Airport Utility again, and it's fine usually for a few hours or most of the day, but then quite often I will open Airport Utility again later in the day and it again will not be able to find the Time Capsule again.
I have tried firmware 7.3.1 and 7.3 but it didn't make any difference.
So I wonder if anyone might have any suggestions as to why Airport Utility would not be able to find the Time Capsule yet the same Mac from which I am trying is quite happily connected wirelessly and surfing the web.
Thanks in anticipation!
KenWow it took me awhile to find this thread.
1047 views. I guess I'm not alone.
Every few days my macbook pro quits recognizing the Time Capsule even
though it works fine for wireless internet.
Airport Utility doesn't see it either. Shared disk access, gone.
I found I can get things working again over wireless if I plug the computer
into the time capsule with a cable. When I plug it in the time capsule instantly
appears on the list of available backup devices in time machine settings.
If I do a backup and then disconnect the cable backup continues to work for
awhile. Then I need to connect again.
Pretty silly bug.
When it works time machine and time capsule are great. We've used it to
recover data very easily.
Wish the connection wasn't so flakey though. -
What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.
See if this helps...
http://pondini.org/TM/C12.html -
New iPad makes time capsule internet slower
I currently have a time capsule as my internet router for an iPhone, iMac and MacBook Pro. I also use the time capsule as a back up disk. I recently bought my husband an iPad 2 and have noticed that when he is using it in our house, the desktop and lap top internet speeds become REALLY slow. When he goes somewhere with his iPad, the internet goes back to its normal fast speed. I did a bit of reading and understand that the more devices you add to the network, the slower it becomes and that it is only as fast as the slowest device. Also, I know that our time capsule is a dual band wireless network (2.4 GHz and a 5 GHz). What can I do to speed up our internet again so that we can use both iPad and computers at the same time?
Your three devices connected to your TC means that you have no "unknown" devices using your WiFi network.
Speedtest should connect immediately through your browser.
Let's try working backwards to find a solution...
Apple computers / devices > WiFi Network > Time Capsule > ISP modem > physical connection to residence > ISP service.
Step One
Firstly - I make assumptions in my instructions - please let me know if you require further assistance with any of the suggested actions - rule of thumb - if you have spent more than two minutes trying to work out what I have written, then I have not written clearly or with enough detail, so please reply and ask me for clarification.
Assuming your iMac and MBP are working OK, let's try to determine whether there is a problem with your WiFi Network (the radios in your TC). Using an Ethernet cable, create a physical network connection from either your iMac or MBP to the TC. There are three Ethernet ports on the back panel of the TC - connect to any one of these. Next, disable the WiFi radio on the connected computer. The easiest method to complete this task is via the WiFi symbol in the top right corner of your computer screen - often this icon is located just to the left of the clock. Click on the WiFi symbol and select >Turn Wi-Fi Off. Now open your favourite browser software - for example Safari - and attempt to connect to the internet. You may as well attempt to load the www.speedtest.net page, and if possible run the test. Do not wait five minutes - if all is working as it should, this page should load in a few seconds and the test itself should take 10-20 seconds.
Do you have the same issue with speed? Please let me know the outcome of this test and we can progress further. -
Time capsule drive and external drive won't wake up
I have a time capsule purchased in August (2TB) and a 2 TB WD MyBook external drive plugged into the usb slot on the time capsule. Given my computer is a laptop, it is nice to be able to put the external drive somewhere where it doesn't have to be plugged and unplugged with laptop use. The WD external drive houses my itunes library and is pretty sensitive and loses data whenever not powered down cleanly.
The problem:
Time Capsule drive and WD drive seem to go away and not allow me to access them no matter what I try. The only way to get them responding is to pull the power plug on the time capsule and power back on. This needs to occur each time I want to access either drive. When attempting to connect via finder I get connection failed errors.
I have no connectivity problems with airport. Access to network is fine, so I know the TC is not totally dead, just the part that lets me access the hard drives. It is interesting that time machine appears to be able to access the drive on the tc without problem but I'm not sure how confident I am that this is true just because it is telling me so.
Any suggestions? anyone else seeing this?I am having this issue as well.
The behavior seems to be that the drives are available after a reboot and for some time afterwards. Then at some indeterminate time, the drives become unavailable. The Time Machine backups stop with a "Backup Delayed" message and I have to go to the Time Capsule and reboot it by removing the power and re-inserting it.
When the drives are unavailable, the wireless router functions are still active since I use this router as my gateway to the internet. -
TIme Capsule can't find backup disk!!!!
Just installed a new Airport Extreme.
My wifi is working normally.
But, I cannot "see" the Time Capsule as backup disk.
Everytime I try to start the backup, It tells me to configure a new Time Capsule.
Tryed to reset and everytihing, but nothing so far.
Need help.
TksI don't follow ..
Just installed a new Airport Extreme.
Do you have a time capsule.. ?? Extreme and Time Capsule are different units.
There is no hard disk in a AE. You can use a USB on the current Gen6 AE for TM backups but none of the previous generation are actually reliable doing TM backups.
Everytime I try to start the backup, It tells me to configure a new Time Capsule.
Again because you do not have a Time Capsule if you are using an Airport Extreme.
Maybe you are looking for
-
Appending data from one table to another
Hello How to append data from one table t1 to another table t2. t1 and t2 have the same structures . t2 contains already data so i don't want do delete it and create it as select * from t1. If there is a mean to add t1 content without altering t2 con
-
How do i open ashx files sent to me
I am recieving pictures from a smart phone that I need to complete a review. They are jpg files but when I go to open them they are ashx. files and I cannot open them. Is there a way to do this?
-
Will Mountain Lion affect my iLife installations?
I have a 2011 Intel iMac, which came with 10.6.7 disks. Soon after getting it, I upgraded to Lion. I am about to upgrade to Mountain Lion and I am concerned that my existing iLife suite may be affected by the upgrade. If I have a problem, where do
-
Bought 2 4200's - completly different results - Read on
Purchased initial E-4200 about a week ago for 179.99, IPV6 worked out of the box, speed and range was very good, IP addresses showed when connected. I could not justify spending 190.00 (179.99 plus tax) and returned the unit. hoping in the future th
-
What program name and table name?
Assuming I am just a SAP user and not an ABAP programmer, how would I know the name of the program and the table/s being used by the report (like an ALV report) which I have on my screen. Thanks.