Time capsule is frequently crashing and has to be powered off and back on
I have had my Time Capsule for several months with no problems. Last few weeks it is crashing several times per day and has to be powered off and back on. When this happens there is no light of any color. The reset button does not work and I have to unplug it and then plug it back in. I have the latest updates. A couple of times it wouldn't restart after I plugged it back in for 10-15 minutes. Any thoughts?
At minimum power down your entire network starting with modem first. Then wait a few and power back on start with modem first.
Similar Messages
-
Time machiene can no longer find the back up files on my time captule..
I have have manged to see the files via finder.
dleted the files, and also gave time captule a new name, and pasword.
All seemd fine but somehow the new back up could not be finished.
Repeated all the steps, but now had the computer hooked up to the time captule with a network kabel ( make it go quicker..)
Still no succes...
Seems somhowe acces to the time captule is difficult for the time machien software...You may find useful advice in this post.
-
I have tried resetting, following instructions on Apple support.
2 amber lights are showing, saying no internet, and no dns servers.
On the same network I have direct link to TV, working fine.
The TC does not seem to be able to pick up IP address even though directly connected with Ethernet cable.
I'd appreciate any help possible.So what kind of modem is it.. is it cable.. if so you need to power it down and leave it off for 30min or so .. maybe shorter or longer depending on the ISP.
Do a full factory reset on the TC.
The Factory Reset TC Gen1-4. Or AE Gen1-5
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Plug into the TC by ethernet from computer and setup as router .. ie dhcp and nat.. if it fails please give info on the firmware of the TC and the actual modem model number. -
I recently purchased a Time Capsule to store data at my office. I have an Apple TV at my home that I would like to start using to play my movies. With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV. Does this sound possible? We have an iMac at the office that remains on 24/7 connected to the TC.
ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more. -
My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.
Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/ -
I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I have tried turning on and of Hiding Files in Finder and what not with no success. So, how do I delete this folder. Remember, I am not extremely familiar with technical terms.
I recommend you erase the TC.. it is the easiest and fastest solution.
In Airport utility open the disk tab and select erase.. choose quick erase.. it will take less than 1min.
Start again but copy files in small amounts. -
my macbook pro is connected to internet via my time capsule but my iPad and iPhone won't. it shows wifi connection to the time capsule but when i go on to the internet on the iPad or iPhone, it comes up with network error. can anyone help?
This can be caused by a number of issues.
Was everything working and then suddenly stopped??
Or is this a new clean setup and has never worked.
Do you have a cable modem which is not a router and the TC setup in bridge? That will cause it. The TC must be in router mode, ie dhcp and nat.
Check the IP the MBP gets including dns and gateway..
Then check the ipad/iphone.. post what IP dns and gateway (router in applespeak) they get. -
I am planning on using my time capsule as a network and essentially an external hard drive - not just back up, is this ok?
Most users should use the Time Capsule for backups. This assumes that "original" copies of your data are on the computer and backups of this data are stored on the Time Capsule.
If either the Time Capsule or the hard drive on your computer fails, there are at least copies of your important data on the other drive.
If you are asking if you can place "original" files on the Time Capsule, do you have a plan to backup those files?
If the Time Capsule drive has a problem....and your only copy of your important data is on the Time Capsule....you will lose everything.
If you are asking if this is OK, the answer for most folks would be "no".
Can you clarify if this is what you are asking? -
I need to add a secondary hard drive to my time capsule. Can something that has been set up for a windows machine work without re-formatting?
In addition to Niel's comments, if you plan to use Time Machine to backup a Mac to the secondary drive.....that application needs a drive that has been specifically formattted for Mac. That would be Mac OS Extended (Journaled).
PCs can also read and write to the Mac formatted drive. -
How to use time capsule as hard drive and connect with existing net gear router
I have a netgear D6300 router, which i use to connect to internet - which is excellent so far for my downloads and games etc for my PS4 and hence am keen to continue using it. I bought the Airport time capsule for wireless storage, and when i set it up, I was advised on setup to connect the TC to my router, and it did what it needed to do.
Now, in order to connect to internet, i need to connect wifi to net gear router, but to access time capsule, i need to change wifi connection to my newly created wifi network with TC.
I want to use TC as a backup storage for my mac (its a 3TB TC), but also, my laptop has only 500gb hard drive which is now half full from downloads, so i want to transfer all my downloads to my TC and use it as an external hard drive, and future downloads to TC - but when i connect to wifi of TC, i can copy my folder on my mac, but not paste it to TC in finder. (the only thing in TC is an image of tmg of my macbook from first backup.).
How do i use TC as an external HD - there wasn't much difference in price of external wifi/wireless HD between non-TC and TC at 3gb, so i just thought i'd go for the airport TC option.
And is it possible to keep connected to wifi internet via net gear router, AND wifi TC - the whole point i bought it (from US shipped to australia on eBay, therefore not able to send back) was to use TC as external large HD via wifi, but keep my net gear router going.
Surely there is a way to not having to flick between wifi connections of TC and net gear internet.
When i'm connected to TC, i can't access internet, only TC.
And I don't really want to connect TC to my router via ethernet cable, as too many cables.
This can't be a difficult situation to manage, but i'm not sure how to do it.
ThanksAnd I don't really want to connect TC to my router via ethernet cable, as too many cables.
Sorry but you have very little choice.
The TC can join to a wireless network.. but it is flakey, poor, slow and highly NOT recommended way to do things.
Nevertheless if you want to give it a try .. here is the method.
How do I setup my time capsule with wireless internet?
You SHOULD, plug the TC into the Netgear and run it in bridge mode.. you set the wireless to create a wireless network.. then when you connect to the TC it will be also connected to the internet and fast.
(if you don't do that you may as well have used a USB drive plugged into the Netgear, as it would be just as good).
TC is not actually designed for mixing Time Machine backups and files.. but if you are just storing downloads that is ok.. but I strongly recommend you use a DMG or sparsebundle to prevent the TM and the data from messing each other.
See Pondini instructions here.
Q http://pondini.org/TM/Time_Capsule.html -
Time Capsule error 22 - My time capsule was working fine and didn't notice anything wrong with it until it stopped backing up about two weeks ago. I never changed anything like computer names or the Airport settings. All I get is the following:
The backup disk image "/Volumes/Data/Linda's Computer 1.sparsebundle" could not be created (error 22).
I tried resetting the Time Capsule and connecting with an ethernet cable, although the Ariport Utility says everything is working fine through WiFi.If the light will not turn on the TC is dead. No matter that the hard disk is running.. it should only run at start up or when it is accessed not constantly.. that means the board in the TC has failed. Apple do not repair them.. They will replace it under warranty or applecare.
If you have gone over the 12month warranty it will still be covered if you have applecare on any computer or an Apple TV. In fact the cost of the apple TV plus apple care is still cheaper than buying a new TC.. so it is a route some people are taking.. certainly depends.. in some places like Europe or Australia now, there is a recognition that statutory warranty must be longer on a product that is premium to the market. 12months is not good enough. Apple will sometimes listen.
They might be fixable but I do not know how. -
My Time Capsule suddenly stopped working, and i can not even mount it anymore. When i ask for a backup, the time machine keeps looking for a disk with no success.
I tried all the FAQs suggestions:
1) I change the name of the disk using Airport Utility;
2) I updated it using Airport Utility.
Now i can not even try to erase the disk because after to update it, the disk in not listed anymore.
Now i can just read a "internal disk needs repair" message. that wasn't there before, having in mind that the first response was "there is no space at the disk for a backup".
What can i do?The TC has a fault..
Power it down and let it cool off overnight. Power it on again the next morning and check if it works.. no luck factory reset.. do all the tests quickly as you have 10-20min before the Temp rises to kill it again.
No luck it is dead.. give us the actual model number.. A1xxx from the base.
How old is it?? Beyond 3years they do become dodgy. -
Can I use time capsule to store music and video files as well as use it to back up.
Can I use time capsule to store music and video files as well as use it to back up.
Sure.
Why are so many peolple asking this?
Just store your files there.
And when using Time-Maschine for the back-up select the Time-Capsule (whatever name your has) as the place to store the date.
cheers, anne -
Using Aperture 3.51 I am having frequent crashes and freez ups when editing Canon raw files?
HI,
I have an IMac with 4 G of Ram and am using Apeture 3.51. When trying to edit CS2 raw files I experience frequent crashes and freez ups of the whole computer. Any suggestions?You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System -
How to Set Up Time Capsule With Airport Extreme and Airport Express
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.
Maybe you are looking for
-
How to connect turntable to Macbook pro?
Hello, I have a turntable that has a Y cable and want to know how I can hook it up to my Macbook pro laptop. I don't want to record anything or save anything I simply want to play my records on my laptop. I don't have a receiver.. THANKS so much!
-
The iBook came with Entourage home page set to Google. No matter how I try, I cannot make a change to another home page stick.(Safari>Preferences>Home page). I have tried entering the address of the home page page I want, and also entering that addre
-
Does anyone know if WebLogic Server V6.1 Service Pack 6 can run ok with Oracle 10G using oracles thin driver? Regards, Terje Schjonneberg
-
Clasical Report column headings display
Hi ABAPERS iam working on clasical report. in that i have to display 16 field headings. when executing the report, the column headers should be frozen at the top so that when the user is scrolling down, they can see what the column title is. how
-
Setup of a multi-instrument (doesn't work)
Hi guys, I setup a multi-instrument in order to have individual control over each part of a Stylus RMX. I did it exactly as the Stylus' tutorial says but it doesn't work. If for example I select subchannel 1 in the arrange and play something or have