Time Capsule is not work with anything.

Did work at first, but when I try to hook it up to mac mini no deals.

Information is hugely valuable commodity.. and since the crystal ball fused we have no idea what you are talking about.
Give us the facts.
odisefrombeech grove wrote:
Did work at first, but when I try to hook it up to mac mini no deals.
Does it still work on everything else except the mini?
Are you trying to link by ethernet or wireless? Have you tried the other one.. ie if you tried wireless then try ethernet or visa versa.
Have you reset the TC and redone the setup?
Is the TC setup in bridge or as router?
Did you check the TC log which should give you info on what is happening?
Give us the facts.

Similar Messages

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

Time Machine will NOT work with Airport Disks!

It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
http://www.apple.com/macosx/features/timemachine.html
It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Time Capsule backup not working anymore after upgrade to Snow Leopard

Hi,
after I upgraded to Snow Leopard I started the backup process with the time capsule. Within several days I tried this about 5 times and the iMac crashed or froze after some time doing the backup - but it never completed.
I then deleted the whole content of the time capsule and started a fresh backup. Now I receive a message after some gigabyte that there was a problem and I should try it again. Again the backup has not finished so far. I tried to reduce the amount of files to backup by excluding folders - no chance. Since the upgrade to snow I was not able to complete one single backup.
Any ideas or similar experience?

I have had a similar problem. I have the latest 1TB Time Capsule and backup worked fine in Leopard. I am backing up over my home wireless network. The backup starts, but at some point it freezes with the spinning pizza wheel if I click on anything. Everything freezes with no possibility of force quitting any application.
I tried trashing the plist for Time Machine, but that didn't work. Tonight I'm going to try a backup with the computer connected to the Time Capsule by Ethernet.
I can access my existing Time Machine backups on the Time Capsule.
This is a frustrating situation. But for this, SL works great, but this problem is a critical one.

HT3728 since Oct 25 my time capsule is not working properly. I enter the time machine to check my backups and the only thing I see is balck screen on every single day since I put it to work on my house. Any ideas on what's going on?

I am having problems with my time capsule.
It's not backing up... if I enter the time machine, all I see is a black page, any day I look, since the day I bought it.
Was not like this before Oct 25...
Any ideas on what's going on and what should I do to make it work again?

Check the USB cable first to make sure that it is operating correctly on another connection.
You may need to use a powered USB hub with the drive since the USB port on the Time Capsule is not a high powered port like you have on your Mac.
You may need to use the powered hub even if the hard drive has its own external power supply.

Time Capsule doesn't work with proxy?

Hello! I have a Time Capsule working with an ethernet connection which is controled by a proxy server. I don't see the option to configure TC in order to download the .pac file, or to configure manually the proxy settings.
Therefore, the internet through TC doesn't work!
Anyone knows a solution?
Thanks

The blurb about Time Capsule not being compatible with some ISPs is no different from the same blurb that Apple has attached to the specs of all previous Airport base station products. So... if your ISP currently works with an older model Base Station, it will work with Time Capsule. ISPs that typically don't work are ones that use uncommon DSL communications or authentication protocols - often found in parts of Europe and the Middle East.
(Speculation on my part) Time Capsule will not function as a wireless client on an existing wireless network. Therefore, users of an existing wireless network will need to either (a) replace their existing wireless router with Time Capsule or (b) cable Time Capsule to their existing wireless router and disable the router built into Time Capsule. These are exactly the same options faced by previous purchasers of Apple's Airport base stations.

Time Capsule does not work and i can not not mount it anymore, even after follow all apples instructions at FAQs

My Time Capsule suddenly stopped working, and i can not even mount it anymore. When i ask for a backup, the time machine keeps looking for a disk with no success.
I tried all the FAQs suggestions:
1) I change the name of the disk using Airport Utility;
2) I updated it using Airport Utility.
Now i can not even try to erase the disk because after to update it, the disk in not listed anymore.
Now i can just read a "internal disk needs repair" message. that wasn't there before, having in mind that the first response was "there is no space at the disk for a backup".
What can i do?

The TC has a fault..
Power it down and let it cool off overnight. Power it on again the next morning and check if it works.. no luck factory reset.. do all the tests quickly as you have 10-20min before the Temp rises to kill it again.
No luck it is dead.. give us the actual model number.. A1xxx from the base.
How old is it?? Beyond 3years they do become dodgy.

Time capsule don't work with Canon PIXMA ip4850?

I have a Time capsule (third generation) and a new Canon PIXMA ip4850.
When I connect the priner directly to my MBP I can print without problems.
But when I connect the printer with the TC USB port, then the TC can't find the printer.
Can somebody help me? Is this printer not compatible with the TC?
Because with my old Brother printer I've had no problmes to print with the TC...the TC found the printer once I connected him with TC USB port
Rgds

Unfortunately, this would indicate that the Time Capsule does not support this Canon model.
You might try the Canon support site to see if they have any newer drivers available for download that might do the job. Apple also has updates from time to time, so a future update might incorporate this model.
Since Canon supplies the drivers to Apple, you might also want to ask Canon if they plan to provide the drivers for this model for the Time Capsule.

My old Time capsule was not working well. I replaced it with a new Airport Extreme. Now I can see the other airport express stations. I tried resetting them, but it did not work. What do I do?

I replaced my old time capsule with a new airport extreme. I have 3 airport express stations that I have all around the house. (2 1st generation, 1 second generation). I can't see them with airport utility. I tried resetting, but no luck. Any suggestions?

Bring all the express to the same room as the mac you are using to setup the network..
One by one, plug them in and do full factory reset on them.. they should then show up in the Airport utility as Other Wi-Fi devices (1) and you can select them and continue the setup.
If that fails try using the airport utility on ipad or iphone as they are far less problematic than Yosemite in particular.

Restore from Time Capsule slow not working properly help!

I bought my time capsule about two weeks ago. I have backups from most of those days on my time capsule. Since then I had to clear my hard drive and re-install my operating system. I did not think this was a big issue since i had the backups on my time capsule. However, whenever I try to do anything with a restore it is EXTREMELY SLOW. I only once got it to where it said it would restore, and I had and estimated time of over 15 days. That is just not even reasonable. I have tried restoring from several sources: restore from backup (after booting from disk), migration assistant, time machine. They all are very very slow and I only have about 100gb that was backed up. Does anyone have any tips on how to get this working. I have spend over 6 hours on tech support. I am connect via ethernet cable and I just do not understand why this is so slow.

I bought my time capsule about two weeks ago. I have backups from most of those days on my time capsule. Since then I had to clear my hard drive and re-install my operating system. I did not think this was a big issue since i had the backups on my time capsule. However, whenever I try to do anything with a restore it is EXTREMELY SLOW. I only once got it to where it said it would restore, and I had and estimated time of over 15 days. That is just not even reasonable. I have tried restoring from several sources: restore from backup (after booting from disk), migration assistant, time machine. They all are very very slow and I only have about 100gb that was backed up. Does anyone have any tips on how to get this working. I have spend over 6 hours on tech support. I am connect via ethernet cable and I just do not understand why this is so slow.

ATT hooked up new u-verse router, now time capsule does not work and airport utility does not see it ?

ATT hooked up the new U-verse router replacing the older 2wire router. Old 2wire router worked fine with Airport +Time Capsule. Now only the amber light flashes. When I try to reconnect with Time Machine it does not find the Time Capsule nor does the airport utility find the Time Capsule. Any help?

Okay, the 3801HGV also doesn't bridge - but there is a workaround. Info on the workaround comes from 'SomeJoe7777' at this link:
http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV- bridge-mode-or-another-AT-amp/td-p/2707013
As for connecting to your TC: the 3801HGV uses a default IP address of 192.168.1.254. It passes out IP addresses to your networked devices, and all of those IP addresses will be 192.168.1.something. The TC uses a default IP address of 10.0.1.1. As your primary router, if the TC's defaults weren't changed, the TC would be handing out addresses to your networked devices that are 10.0.1.something.
If your computer has an IP address of 192.168.1.something, it won't be able to see the TC if the TC's address is 10.0.1.1 (or anything else that's not 192.168.1.something). Hopefully that makes sense!
Go into System Preferences on your Mac, and click the Network icon. Click on Ethernet on the left side, and you'll be able to see what IP address your Mac has been given. My guess is that it has a 192.168.1.something address from the 3801HGV.
If I'm right about the 192.168.1.x address, and that your TC is running with 10.0.1.x addresses, then that's why your Mac can't see your TC. In this case, you need to change the Mac's Ethernet setup to manually set your Mac to a 10.0.1.x address for the TC to see. To do this, go to System Preferences, then Network, then click Ethernet on the left side.
Set the Configure IPv4 dropdown to 'Manually', and it will open up some places for you to fill in information:
IP Address: 10.0.1.15 (or a similar number that won't conflict with your TC's address, but starts with 10.0.1)
Subnet Mask: put in 255.255.255.0
Router: 10.0.1.1 (I'm assuming here that your TC was running with the default IP address; if it was something different, then set Router to whatever IP address your TC was using.)
Then, click the Apply button to make your changes active.
Now, since your Mac's IP address will be in the right "subnet" for your TC, they should be able to see each other. (It's kind of like having to live on the same block as someone to be able to talk with them. In general, if your computers don't have similar addresses, they can't talk to each other. Of course that's simplified greatly, but you probably get the idea...)
Once you've got the IP addresses matched up, you should be able to see your TC. At that point, you can update the TC to work with the 3801HGV. I recommend setting it to bridge mode, but if you can follow SomeJoe7777's advice, go for it!

My time capsule will only work with one device at a time

I just purchased the Airport time capsule. I have it set up with my imac, but I also run a macbook air, older macbook, PC laptop, PC desktop, wii, xbox, and 3 iphones off of this device. My issue is that my ISP does not serve more than 1 IP address and with previous routers, the IP address they recognized was only on my router. Now, each time a new device tries to use the internet, my ISP is bypassing time capsule and recognizing the device IP address. It's very frustratitng! How do I set up my Time Capsule so that it's IP address is the only one my ISP recognizes, but all my devices are able to run off of the Time Capsule as the router. (obviously I am not over educated in this area so solutions in simple language are greatly appreciated!) Thanks!

I read the same solution somewhere else in the forum but it does not solve my problem. When I set up the Airport, it sets up in bridge mode by default. When I contacted my ISP they said it needed to be in bridge mode (their rationale is that they only allow 1 IP address). I just switched it to DHCP and NAT and this is what the default settings go to:
After I update it with these settings my internet won't work at all and this is the error message I get:
Any suggestions?
My internet "Digis". www.digis.net. They are a smaller company and put a dish on my roof. The modem is very small, does not have a router.

Time capsule is not working!!!! help me!!!

Ok my time capsule is showing an amber light and will not connect to internet i've had it for 6 months and it was working now it will not.
ok so I know my internet is working because i have a hard line on one computer and that one is connected. I've been told to open airport utilities and the network then to switch IP address,subnet mask, Router and DNS server. So I switched utilities info with network info and it did not work(has worked in the past). I really don't know what to do Im not very tech smart so please help me!! school starts soon and i need my network up.
oh and I've talked to my internet providers they are unhelpful, they say the internet is working so its not their problem..and i understand that but a little help would be nice...oh and I have talked to a friend who works for apple and she could not help so please help!!...lol thanks

Under Internet Connection in the Airport Utility, what have you got for Configure IPv4?
Have you tried Renew DHCP Lease?

Network printing with time capsule doesn't work with OS X Lion

I have a canon printer which will print when it is set up and connected to my imac. However when it is set up and connected to time capsule it will not print. It thinks it has completed the job but it hasn't.
I think that this may have something to do with OS X Lion.
The printer is just new, I bought it as the old one was playing up - I had been unable to get the old one which was connected via the time capsule to print since installing OS X Lion but never put two and two together - I just assumed the the printer had eventually died! So I bought a new one! It seems to set up OK as it is recognised as being attached to the timecapsule but there is no out put.
Does anyone have any ideas as how to sort this out?
Ian

Solved (apparently): After reinstalling, iTunes 10.5 beta 3 appears to work.

Flash, Adobe Air, Time Machine, Safari not working with Snow Leopard

Really need some help with this.
Did an archive and install of Leopard then installed Snow Leopard. No problems yet.
90% of Video sites would not work. Uninstalled and reinstalled Flash. Uninstalled ShockWave, could not reinstall with 10.6.1.
Attempt to install adobe air, received this message: "couldn't write the application to hard drive - please verify and try again." performed verify disk, disk permissions, repair permissions all ok.
Attempted to install Air again, same message.
Tried to use Time Machine to open Safari from a week ago, received message: I did not have permission.
Using Macbook Pro, 2g memory, 80g hd, with 42g free.
Backed up on ext. HD,
Oh, one more, getting a lot of spinning wheels when using Safari that causes a lockup and hard re-start.
I have an expensive piece of software that uses adobe air and I create videos for my business and I'm not able to do so now.
Can anyone give me any ideas what I can do.
Thanks,
Z

After a couple of days of problems with Snow Leopard and flash, safari etc... I figured out the problem is with my account.
I created a new admin account and everything seems to be working. Well almost.
a couple of things I've noticed are right clicking on dock icons does nothing, no option to quit or keep in dock.
Apple Techs', had me change my account months ago to fix a problem with safari crashing. It didn't really work and more problems resulted.
*So now my big question is: How do I move need items over to the new account.* I don't want to move everything over as I might bring what caused the problem in the first place.
What I need are several apps,(like ilife, iwork, firefox, devonthink, 1password etc.) downloads, desktop, docs, files, and book marks.
*What is the best way for me to do this?* Is there anything I need to do re: Snow Leopard on the new account?
I feel like I have a new and functioning Mac again just around the corner.
Looking for your help, thanks,
Z

Time Capsule is not work with anything.

Similar Messages

Maybe you are looking for