Time Capsule L2TP

So until now I've been using an Edimax WiFi router. The connection it has used was L2TP (screenshots: http://dror.de/timecapsule.png and http://dror.de/timecapsule2.png)
Now, the Time Cpasule lets me only choose to use either the PPPoe connection or the Ethernet connection. I tried both, neither one of them works.
What do I have to do?

I am guessing that the presence of all those options in your 'router' shows that it is actually a combined modem/router.
The TC is just a router and has no modem functionality, so if you are using ADSL with PPoA connections (quite common) the you need a separate modem.
What model of Edimax is it ?

Similar Messages

Time Capsule port mapping is broken for L2TP Servers behind NAT config.

I'm hoping that someone here can refute the below bug assertion... am I missing something?
There is a bug with Apple’s Time Capsule/Airport Express Base Station (TC/AEBS) rendering L2TP servers on the LAN unusable:
When TC/AEBS is used as a router providing NAT services to the LAN, it will NOT under any circumstance provide port mapping services for 500/UDP, 1701/UDP, & 4500/UDP making L2TP VPN servers on the LAN side of TC/AEBS are unreachable from the WAN/Internet side.
*The conditions for my tests*:
3 different external networks used for all tests: MacBook Air at home on TWC network, the Air on AT&T mobile dongle, & CentOS server at ThePlanet.
MobileMe configuration was removed from both the TC/AEBS & Snow Leopard Server on the LAN.
I used port 501 for my control-test; spot checks of other ports worked as well, though they were all < 10000.
Simultaneous local and server monitoring of port traffic using
tcpdump -vvv -i en0 -s 0 -X port 500 or port 1701 or port 4500 or port 501
The TC/AEBS was configured to forward UDP ports 501, 500, 1701, & 4500 received from the WAN interface to the Snow Leopard Server on the LAN.
The port forwarding was accomplished both 1) manually via AirPort Utility, and 2) automatically via Snow Leopard Server’s Server Preferences utility. Each was tested separately.
*The tests*:
Netcat with the following commands, in turn, on the server:
nc -l -u 501
nc -l -u 500
nc -l -u 1700
nc -l -u 4500
which causes traffic to the udp port specified to be dumped to std out. Provides a confirmation of the tcpdump output.
On the various external networks, nc -u WAN-address-of-AEBS.example.com 501 to send UDP packets on port 501. The output of the nc -l 501 command and the server-run tcpdump confirmed that packets left the client and made it to the server as expected. Remember, 501 is the control-test.
For each test permutation on ports 500, 1700, & 4500, no packets made it to the server.
Based on some web research, I’m not the only one to have found trouble with this configuration, but I haven’t been able to find any conclusive tests.
I’ve filed a bug with Apple (#7720101) and encourage you to do the same.
Message was edited by: WebMarc

Confirmed here. This only seems to be a problem with Airport 7.5.x firmware though - I find the older TCs running 7.4.2 work as expected even with BTMM / MobileMe services active.
I'm so glad you posted this - I haven't found it mentioned anywhere else and was beginning to feel very alone with this problem. I also found that having two TC 7.5s in the mix - one at both ends - also results in no response to SSH or Remote Desktop ports.

How to make Time Capsule work with L2TP

How do I setup Time capsule to work with an L2TP connection? The technical specification says that it should work with VPN Passthrough options (including L2TP) - but I see no options to select.

Agreeing with Jolly Giant that you don't need anti-virus software to protect your Mac.
You do, of course, need the usual array of security stuff if you're running Windoze, but only on the Windoze side. TM won't back-up a Boot Camp partition, and if you're running via Parallels, vmWare, or the like, you should exclude the virutal machine from TM anyway, and back it up separately via a Windoze app.
If you're worried about passing Windoze viruses between your PC friends, get the (free) ClamXav app (via Google). It's the least intrusive.

Cannot Access Corp VPN through Time Capsule Since Update

Since updating to version 7.6.1, I am no longer able to VPN to our corporate servers from home... from any device. We know its the Time Capsule because:
1) Connecting the laptop directly into the Provider and not using the Time Capsule, VPN will then work
2) Taking the iPad off of the Time Capsule wireless and having it on 3G allows VPN to work
FYI - we do not use any type of "ADSL/Cable" modem here since our building has Optical and there direct-to-provider LAN through the optical switch in the building cabinet.
Steps I have Taken: I have scoured through the settings to see what might have changed... and honestly nothing changed on my Time Capsule. I went ahead and did a full reset of the device and upon reset checked to see if I could connect to our VPN server but still could not. I am able to setup a L2TP and PPTP VPN server inside my home and I am able to access it remotely.
On thing that is interesting is that I can do a traceroute out the port and it does get out, so its not like its being blocked.... I am at a complete lost to what is going on. Anyone have any insight?

What type of vpn exactly does your corporate server use? I presume it is ipsec of some sort.
I think BTMM (reintroduced with Lion and iCloud and 7.61 firmware) uses ipsec somewhere in the process.. so it is very likely Apple allocated those ports to its own usage.. and really have a could not care less if ipsec now fails for anybody else.
A solution is to simply go back to 7.5.2 firmware.. which I take as being the last that worked mostly properly!!
Another solution is bridge the TC and get another router.
As for fixing the TC.. apple have a record of breaking vpn in firmware upgrades and fixing them at some future point.. but don't hold your breath.

VPN Server behind Time Capsule

I have a mixed environment at home, with several Macs, two Ubuntu servers and 3 Vista laptops the family uses. Recently I had the need to setup a VPN server on one of the Windows machines with standard PPTP/L2TP, nothing out of the ordinary. All my internal clients can connect to the VPN server just fine, however, I find no specific VPN passthrough option nor a port forwarding option for GRE in Time Capsule, thus, any external connection attempts have been in vain. Yes, I have tried this by dropping all firewalls, etc for a short period of time, but to no avail.
The time capsule is hooked up directly with my ADSL2+ modem, where RFC bridging is setup on the modem to allow Time Capsule to be my sole NAT devices.
Any insight into this, or has anyone else had success with this?

I did extensive testing with this last night but still managed to get nowhere (did fix another NAT-PMP on IPv6 issue I had though by enabling Tunneling on the Time Capsule -- another story but my time wasn't completely wasted ).
I'm just trying to get L2TP working personally... I think this uses ESP rather than GRE but the same principle applies. I disabled all 'Back to my Mac' services too, I felt these may be interfering with IKE/NAT traversal ports (I know it's a requirement to kill these for CISCO VPN client to work).
Which ISP are you with btw? I'm on BT.. You don't think they are the root cause in my case do you? Clutching at straws now i know.
Wonder id my AEBS functions any differently....

VPN server and Time Capsule

I am having problems accessing a VPN server behind a Time Capsule.
I have enabled the VPN server on a Mac Mini running 10.5.8, using iVPN. It is configured for PPTP, and to assign addresses in the range 10.0.1.21/30. The Mini has a static IP address on the local network (10.0.1.20).
Using another machine (MacBook running 10.6) on the network, I log-in to the VPN using the 10.0.1.20 address. The MacBook is configured to route all traffic through the VPN. This works without problems. I am able to access the internet and things on the local network.
Then... I change the settings to use the external IP address from my ISP. The connection establishes, but I am not able to see anything. The connection drops after ~5 mins. Looking at the vpnd log, authentication has gone well but there after it reports 0 bytes sent/received. Connecting using an iPhone over 3G gives similar results.
I suspect that Time Capsule is the cause of my problems. But I don't know what I need to change. Currently, I am directing the TCP port 1723 to the Mini. The Time Capsule is set for "Share a public IP address". The firmware version is 7.4.2.
As a diagnostic, I opened port 80 and directed it to the Mini. On the Mini I enabled the web server. I can see the test page both on the LAN, and also externally.
For completeness I also tried forwarding the UDP ports used by L2TP to the Mini. No difference.

You may need to enable your OS X Server as the Default Host in AirPort Utility. Under Internet > NAT > Enable default host at:, put your server's IP address (it should be statically-assigned using DHCP Reservations in the DHCP tab). This will forward all unsolicited traffic to your server, so make sure the Firewall is up and running before you do this.
The problem is that PPTP and L2TP/IPSec VPNs require special "tunneling protocols" in addition to the standard TCP/UDP ports that are configured through AirPort Utility. PPTP requires a "GRE Protocol", and L2TP requires an "ESP Protocol", neither of which are generally routable with standard firewall configuration utilities. The way around this is to make the OS X Server the default host, which will forward all traffic -- including GRE and ESP --- to the server machine where the VPN service can receive it.
Sadly, the documentation with the AirPort Extreme / Time Capsule is sorely lacking in this department, and has been for some time. Hope this helps, though!
Peter

VPN with Time Capsule, Linksys router

We are running SLS 10.6.4 on a Mac Mini over Cox business internet with a fixed IP, and we've been trying to get VPN service working on the Mini through our TC. After some finagling I came across this post which describes the lack of L2TP support in the TC, so we bought a Linksys/Cisco WRV210 VPN router. We do want to keep the TC on the network for file sharing.
When setting this up, it would seem to me that the WRV210 should be (or would have to be?) the gateway. However, it appears to be limited in the number of ports that can be forwarded (at least without manually editing its config file; the web interface doesn't show enough for our needs). Or maybe there is a way to use the WRV210 for handling VPN access, while mapping a range of other ports to the TC and then on to the server?
Alternatively, perhaps we can continue using the TC as the gateway, mapping VPN access through the TC to the WRV210?
If anyone else has any experience with this type of setup, feel free to chime in.

Having tried this in the past......the only way that I could ever get the WRT54G to connect correctly was by turning off the wireless security on both the Time Capsule and Linksys device.
Not sure if you want to run an open network.....or even if that will work with newer firmware on the Time Capsule. I believe that I was using 7.4.2 or possiby 7.5.2 at the time.
But, you never know. Maybe another user has a magic wand.
My opinion......life would be tons easier if you added an AirPort Express to the Time Capsule network, and added an Ethernet switch with as many ports as you need....and the connection will run 2-3 times faster or more than the WRT54G can provide.

Time Capsule forwarding ports problem.

Hi everyone I really need your help. I'm trying to configure a port forwarding to a Mac that would have to make the VPN server in my house, I''ve a Wimax connection and the router is a Time Capsule. Every time I try to set up the TCP and UDP port in the Time Capsule it says that the port is now open but when i try to go on the internet and look if the port is really open it says that is not and also I can't connect to the VPN server. Any clue ?
Thank you very much.

The actual vpn matters.
What vpn are we talking about?
PPTP, IPSEC, SSL, L2TP
What model TC and what firmware is it running?
And which version of the utility are you running? This is also important.
Is the TC getting a proper public IP from the Wimax connection? Some ISP fudge and use private IP which is not routable on internet.
Put up a screen shot of the actual port forwarding you are doing.. that makes it easier to see if you have the settings correct. But that doesn't mean it will work btw.. the TC can be a difficult beastie to open.
Did you read the info from Tessarex at the head of the section?
https://discussions.apple.com/community/wireless/airport?view=documents
There is one on v6 utility and one for v5 utility.
I strongly recommend using v5.

Airport can no longer read or write the configuration of Time Capsule

I have a MacBook Pro running OSX 10.8.3 and maintained with all available patches. I have also a Time Capsule with version 7.6.3 of the firmware. I use AirPort 6.2. So everything seems to be updated with the latest versions.
This has really been a good setup for nearly a year now, but earlier this month Time Machine suddenly stopped to work and could no longer do backups to the Time Capsule. I have tried to factory reset the Time Capsule several times, but I still get problems when writing the configuration to the Time Capsule. I get an error message saying "An error occurred while updating the configuration".
Airport is furthermore not able to detect the Time Capsule correctly anymore, so I have to configure it by entering the IP address. But after setting up WLAN, disks, etc. and enhanching the security, I just receive the error message when I try to write the config. The Internet connection works perfectly anyway, both via cable and wireless.
Anyone got any tips?

Do the setup by ethernet in full isolation from the network.
Start from a full factory reset.
I would recommend you take the firmware back to 7.6.1 or even earlier if the TC is older than 12months. 7.5.2 was very reliable. All these bugs started with 7.6 and the change to Lion.
I would also recommend installing 5.6 utility.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

In order to create space on my MBA I just bumped iTunes media to G drive linked through Time Capsule. Now pointed iTunes at new iTunes libary on G drive and, even though all music files are there, iTunes can only 'see' 10 albums. Any help appreciated.

Bit more detail...
Mac Book Air has been struggling for space for a while so I bough at time capsule a) for back up and b) to host my itunes folder remotely. This didnt' work. I took it into the Genius bar and the genius there told me that time capsule is not designed for anything other than back up. Instead I have to connect a G drive through the time capsule's wireless router to my MBA.
I followed his instructions - moved my files from the Time Capsule and MBA directly onto the G Drive - which took a heartening 2 hrs so something must have been happening - and the held down 'Alt' when starting iTunes and selected the new itunes folder as the location of my itunes libarary which I wanted iTunes to 'point at'. When I opened iTunes only 10 albums are visible now.
In ITunes advanced preferences it says it is pointing at the correct folder. The files are all cleary there when I open the G Drive folder to take a look. But I cannot get iTunes to find them.
Any suggestions?
Secondary challenge - in spite of deleting the original itunes folder on my MBA I still get messages pop up telling me my start up disk is out of space and I need to clear some - I expected to stop getting this message now I had done this exercise above. I have emptied Trash. Again - any pointers appreciated. I am new to this world of 'intuitive' macbooks.
Cheers

After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

How do I use my Time Capsule with hotel wired internet

How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

It may not be possible..
If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
Look up instructions on using ICS (internet connection sharing) in the Mac.
eg for 10.6.8 http://support.apple.com/kb/PH6589
eg http://support.apple.com/kb/PH10740
Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!

The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Time Capsule set up and wifi network OK but MacBook doesn't see capsule as airport device. Do I need to do a hard reset and start again?

I recently bought a Time Capsule and sucessfully set it up in accordance with the instruction book. The home network and guest network seem to work fine but my MacBook cannot find the Time Capsule wirelessley.
Initially I set up the time capsule connected to the MacBook with an ethernet cable. The Time Machine got 30GB way through a 60GB initial back up and then stopped for no obvious reason. Since then the capsule has not been visible to the MacBook. I have tried to reconfigure through Airport Utility but even after reperated rescans the capsule remains invisible.
Any help would be extremely welcome.

1. i would restore the express to factory defaut by holding the reset button on the unit with a paperclip while you are powering it on
2. if it restored, you should be able to see it in your wifi icon at top of screen as "airport express"
or you can see it in airport utility
3. then if you want to connect it wirelessly to your time capsule, you would choose "extend network" and put in relevant security and password....this would make the express a wireless access point, fed by your time capsule(main router)
if you chose to do it wired which is a better way if you have access to ethernet port at wall, you would choose "create a wireless network" and then under the "network" tab you would choose "Bridge Mode".....this would make the express a wired access point, fed by your time capsule(main router)

Time Capsule Won't Allow Some Programs to Open

I have a 1TB TC with less than 25GB in one sparse bundle on it. Free space is +/- 930GB. My system is as follows:
eMac 1.25Ghz, 500GB internal drive, 2GB memory, OS X 10.4.11, all updates are current.
3TB of storage connected to the eMac via Firewire 400 for additional storage (video).
1TB Time Capsule connected to the eMac via 1000GB Ethernet.
I had to reformat two of the Video (Firewire) drives and transfered 900GB to the TC. This upload by the way takes greater than 10 times longer than to Firewire disks.
I reformatted the FW disks.
When I went to do download the files from TC to the video FW disks I started multiple copy processes. As i write this I have 4 going on, 1-152GB, 1-75GB, 1-525GB and 1-69GB.
The problem is that several programs such as Activity Monitor, Empty Trash (on disks not being used for the copy), Preview and Acrobat Professional "hang" or fail to open while the copy is in progress. Now normally I'd wait, however some things such as activity monitor and empty trash I need to use. Since the process takes several days this is not great!
Other programs such as Safari and Mail work fine!
Any ideas?
John Schubert

Yeah, I had 8 or 10 copy (transfers) going at once, now I'm down to 4. I do this all the time, however before now I've always used Firewire. Does Ethernet require more processor overhead? It would seem so.
I've been looking at a new Xserve or possibly a recent used Xserve and a rack; this video stuff really eats up hard drives. Saw a rack mount enclosure that holds 12 IDE drives-9TB possible for $749 and has Firewire connectivity. I could put all my existing drives in that and have everything in one place.
Anyway I've go to live with what I've go for now.
Thanks
John Schubert

Time Capsule L2TP

Similar Messages

Maybe you are looking for