Time capsule makes me redo a full update all the time

i have the last macbook they made..like the late 2011 model i think they call it and when i upgraded to Yosemite, it will say a lot that the back up failed and i have to erase the time capsule disk and do a full back up from start. do you think there is something wrong with the hdd in the tc? is there a way to do a hardware test on it. i can't find anything online about this. thanks for looking

If you have seen that message more than 2-3 times, it is highly likely that the hard drive is physically damaged.
Unfortunately, there is no easy way to test it, and if it is damaged....which is highly likely....no way to repair it.
You would have to pull the drive from the Time Capsule, place it in a special USB to SATA converter, and run Disk Utility to take a look at the drive. A lot of work....and probably not worth the time and effort.
Best bet is to replace the Time Capsule or buy another hard drive and connect it directly to your Mac.

Similar Messages

My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

Fan runs at full speed all the time

The fan on my brand new iMac 17" runs at full speed all the time, creating an unbearable amount of noise. The activity monitor shows 99% spare time, i.e. nothing much is running.
I updated all software, checked the firmware version (it was the latest already) and performed an SMC reset. I also unplugged it for several hours, as some people have suggested.
I downloaded smcFanControl and it says that the ODD fan is running at 5200 rpm all the time. The CPU and HDD fans seem to run at normal speeds. smcFanControl also reports a cool 39 deg.
Does anyone have any idea of what to try to fix this problem?

I don't have a solution but thought I'd add a computer that showed the same behaivor.
A 20" iMac I was configuring for my company did the same thing, but just once so far. I used it briefly just out of the box and didn't have any problems. It's a stock install of OS X 10.4.8, no other software installed. Turned it on several days later and the fans ran during the 2 hours I used it to run Safari via Airport. I turned if off after it started to smell like hot electrical components. Activity monitor looks completely normal. After shutting it off for two hours, unplugging and re-plugging AC and keyboard, it came back on with no fans. I did not do the SMC reset or any updates between the power cycle.
ps. Repairing permissions is Voodoo
http://daringfireball.net/2006/04/repairpermissionsvoodoo

Make hey siri customizable and work all the time!!!

Make hey siri customizable and work all the time!!!

My question is how can I use dreamweaver with the advanced recordset with the pageID without dreamweaver crashing 20 times a day
Do you get any errors in Dreamweaver when it crashes?
What version?
What OS?
Have you tried trashing recreating the user config folder ( http://kb2.adobe.com/cps/405/kb405604.html#main_user_config )?
Have you tried trashing the preferences ( http://kb2.adobe.com/cps/839/cpsid_83912.html )?
Has anything changed on the system recently (from program installs, to system / OS updates)?
Have you tried creating a new user account on the system to verify there is no corruption in the current user's system data?

For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.

For the last year, I have to refresh my browser to load certain normal pages...IE opens them, but not Firefox. I also have extreme difficulties loading video from sites including YouTube, Yahoo, etc. I open them in IE just fine. I update all the time.

"Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"<br />
"Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"<br />
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your plugins list shows outdated plugin(s) with known security and stability risks.
*Java Plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

Any way to update all the articles at the same time?

Any way to update all the articles at the same time?
is one by one the only way to update?
I have 68 articles up to 800 mb !!!

Unfortunately, the team hasn't added an Update All feature. I believe this is planned for the February release.
If you have your folders and files set up properly with a sidecar.xml file, consider deleting and re-creating the folio.

Spotify premium updates all the time

So this has been going since the last major update. I get that blue bar at the top that says restart to update all the time. i must have restarted it dozens of time and still minutes after the restart there it is again. it is really annoying and definetely abug since i dont think that they issue a new update every five minutes or so.

atom1989 wrote:
Please try to use update link.
http://upgrade.spotify.com/upgrade/client/win32-x86/spotify_installer-1.0.6.80.g2a801a53-61.exeI marked as solution because it fixed the issue (at least for me) This issue was driving me bonkers, and I was on the verge of canceling premium because it wasn't (as far as I know) being acknowledged. Thank you for your help and providing the link. Not sure if you;re aware of this other current issue. The "recently played artist" section is not updating for a lot of people. There is already at least one thread about it. if you could be so kind as to pass on the info to anyone in the know, would be appreciated Again, thanks! https://community.spotify.com/t5/Help-Desktop-Linux-Mac-Windows/Spotify-Recently-Played-Artists-not-updating/m-p/1142060#M129346

Hi guys, i would like to ask about the apple id. Which at this time I have been using the new apple id, can I be able to continue updates all the applications that I have purchased by using the old apple id.

Hey guys, I am newbie here ;(.. I have a question regarding my new apple id. at this moment i've still have all the applications that i've been purchased by using my old apple id.
In case there are an update for the applications in my iphone, " Can i use my new apple id to update all the application that i've been purchased with my old apple id ". If its not possible to do, are there any suggestion for me to updates all the applications by using my new apple id ?
Many thanks ;)

Apps must be updated using the Apple ID used to originally download them to the device.
If you cannot or will not use the old Apple ID, then you can delete the app, and then download it again using the current Apple ID. Be aware that any paid apps will have to be purchased again.

HT1349 For some reason part of the apps on my IPad just say waiting; they were working fine and then just turned dark and say waiting but didn't update when I updated all the apps. Any suggestions?

For some reason some of my apps suddenly went dark and say waiting. I tried syncing with the computer and updating all the apps but they stayed dark. The individual apps in question say they are updated when I looked at them. Any ideas? Do I need to just delete them off the IPad and start over?

Hi you guys,four days ago my FT and iMessage worked well on my iPhone 5 IOS6.1.3,but my phone Number did not in the caller ID loop,so I turned both of them off,when I wanted to turn it on again,but failed,I tried so many times,but make no difference,It shows me"waiting for activation".Then I found the solution on internet,and you know there are many possible solutions,just like:
1.change the wifi DNS to 8.8.8.8,8.8.4.4.and you must turn your cellular ON.
2.restore the phone setting.Settings>>General>>reset>>all the phone setting.
3.restore the network setting.Setting>>General>>reset>>the network setting.
3.reset the network.
4.reset your Date&time.Setting>>Date&Time>>set automaticlly>>ON.
5.change another network to activate.
6.take out the sim card to activate.
I did everything,but nothing happend,it still"waiting for activation"
And today afternoon,i try to activate again,when i turn iMessage on,it activate successfully.OMG,it is really amazing.and the same to my Facetime.
I am so exciting and strange how it happen...
I followed all the setting above 1.2.3.4.5.6,the only difference is i turned the "enable 3G" OFF(Settings>>General>>Cellular Data>>Enable 3G>>OFF),but it keep ON before now.
seriously,i am not sure if the "enable 3G"causes this problem,but it really happened to me,so you guys can try if you have the same problem,
hope my answer is helpful for you.
Message was edited by: housing Alex

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

I changed my Apple ID on iTunes and on the iPhone 4. When I try to "Update All" the old Apple ID (I no longer have access to the email address) shows up. How do I update those apps?

I changed my Apple ID on iTunes and on the iPhone 4. When I try to "Update All" the old Apple ID shows up (I no longer have access to that email address). How do I update those apps?

Apps are DRM protected and tied to the account used to originally obtain them. They cannot be transferred to another iTunes account nor updated using another iTunes account. Only the account used to obtain them can be used to update them. You can contact iTunes support, explain the situation & ask that they add these apps to the download queue of your new account:
http://www.apple.com/support/itunes/contact.html

Well im not able to updated all the events I had in the imovie, HELP

Well im not able to updated all the events I had in the imovie, HELP

I have started preparing a small Database application
using JDBC with Swing.
I want to dispaly all the Table names which are
present in the Access Data Source. When i used the
Standard query for this "Select * from Tab" as in
SQL, an eror saying that "not able to resolve symbol
'Tab' ".
Can anybody please help me out to display the table
names?That query
Select * from tabwould work only for Oracle, as far as I know. There is no system table called Tab in Access.
***Annie***

Do I have to update all the older versions before I can update OS X Mavericks

Do I have to update all the older versions before I can update OS X Mavericks

If you are below 10.6.8, you must get there first.
See here: http://www.apple.com/osx/how-to-upgrade/

How to update all the rows of table using stored procedures

Hi,
I want to update all the rows of a table of a specific column
sp_a male
sp_b female
sp_c male
sp_d female
in above table
gender of all the columns has to be interchanged.

Sir table is like this detail(name varchar(10),gender varchar(10))
Where Details are like this
Name Gender
sp_a
male
sp_b
female
sp_c
male
sp_d
female
I want to create a stored procedure which automtically updates gender from male to female and female to male
for all the rows . i.e., all the rows are updated for column gender by just running a stored procedure.
So after execution of stored proc the above table looks
Name Gender
sp_a
female
sp_b
male
sp_c
female
sp_d
male

Updates all the photos (cameraroll) in iCloud or is it just photo stream when you sync? I have 5000 photos in the camera but only 800 in the stream and I would like to save them all. How to do?

updates all the photos (cameraroll) in iCloud or is it just photo stream when you sync? I have 5000 photos in the camera but only 800 in the stream and I would like to save them all. How to do?

Plug your iPhone into your Mac and open iPhoto. Transfer the photos from the phone to your Mac.

Time capsule makes me redo a full update all the time

Similar Messages

Maybe you are looking for