Time Capsule, NAS and Switch port issues

I purchased a Time Capsule yesterday I can get the wifi to work but I am having some other issues.
I need to be able to attach an exisiting Western Digital NAS drive to the TC through ethernet. When I connect it, it shows up in the finder but will not connect.
I also need to be able to connect a Switch port into the TC as well. The switch runs ethernet thoughout the building to wall jacks as well as running a dedicated PC server.
When I plug both these devices into the ISP modem/router they work but the TC wont recognize them.
Am I missing some settings or steps that I need to take to make this work?

Did you put the TC into bridge mode.. ??
If it is a router.. all kinds of bad things can happen.. like dhcp server is working and double NAT preventing access.. much like you describe.
Setup the TC in isolation from the network. before you plug it in.
Bridge in v5 utility.. (if you run lion it is easy to download and install is still preferred).
Bridge in v6 utility go to the Network tab and change it from DHCP and NAT to off bridge mode.
Picture pending if you need it.

Similar Messages

Time Capsule, Sonos, and Airport Utility Issues

I have a new Sonos system that is accessing music on my Time Capsule, to which I copied my whole music folder. It works fine from the handheld controller, however the desktop controller will show the library, but won't show me the Zone Players or allow me to control the system. Can only control from the handheld.
Another problem is while I can access the hard drive on TC, and play music simultaneously on the Sonos, Airport Utility says it can't find any wireless devices (so I can't manually change any settings on the TC), so I can't tinker with its settings and try to get the desktop controller working.
That being said, the Sonos system seems to work wonderfully, main issue seems to be with the computer.
Anyone have a solution?
Brett

Thank you for your idea. However, after having imported the setup of the previous TC and having experienced problems, I had already done a factory reset and configured everything from scratch! Without using the profile. So I think we can safely exclude a problem connected with importing the older profile, which was in fact my first idea.
On the other side, I haven't tried your suggestion to give separate names to the 5 and 2,4 GHz wireless signals. I'll try this evening, as a last attempt before sending the TC back to Apple. BTW, I put my old TC back in place, and apart from the fact that the disk is noisy and almost full it works without a glitch. Which makes a software or configuration issue less likely, I believe.

Time capsule (2T) and Mac Mini issue

I bought Time Capsule (2T model) recently and replaced existing router and probelm beginning.
I have several Window based PC and Apple TV, Ipod and one Mac Mini and HP D7460 printer.
Window based PCs are working fine, haven't tested Apple TV but Ipod is working fine too.
However, my Mac Mini is loosing connection with Time Capsule intermittently. Can't use internet due to the issue. I installed iStumbler and looks there are two notes I can find from time capsule and one has 2457 frequency but the other one has -1 frequency. But my Mac Mini's airport can't search any wireless router. If you reboot and wait around 30 min, it suddenly found my Time Capsule and star working but stop working after 30 or 40 min later sometimes, 5-10 min later....
Any recommendation? DON"T understand why Mac Mini has issue while Windows PC are working properly...

What wireless mode are you using? G, G/N, N
Is the Mac mini N or G and is the PC N or G?

I have more ethernet devices than my time capsule has ethernet output ports. What do I do?

I have more ethernet devices than my apple time capsule has ethernet output ports. What do I do?

Just to add to Bob's comment.. it is much better to move all the connections to the switch..
Don't leave two connections on the TC and then connection to the switch plus the rest.. plug everything into the switch. The only line running to the TC is to connect switch to TC.
The sweet spot for most people is 8 port switches which are now consumer items.. go into any big computer shop.. buy whatever brand you want.. they are not alot different.. but I have noticed smart switches are coming down in price.. to the point cheap end 8 port smart (managed sort of). are the price of dumb switches a year ago.. they also will have better controls and more details. ie discover what is using bandwidth in the network.. some basic QoS .. lots of stuff that Apple routers missed out on.
eg d-link DGS-1100-08
I just bought one to replace my power hungry managed 16 port switch.. although I haven't unboxed it .. sometimes things don't work 100% on Macs but most have simple browser type access. Not all browsers work is my experience but something always does.

Time capsule drive and external drive won't wake up

I have a time capsule purchased in August (2TB) and a 2 TB WD MyBook external drive plugged into the usb slot on the time capsule. Given my computer is a laptop, it is nice to be able to put the external drive somewhere where it doesn't have to be plugged and unplugged with laptop use. The WD external drive houses my itunes library and is pretty sensitive and loses data whenever not powered down cleanly.
The problem:
Time Capsule drive and WD drive seem to go away and not allow me to access them no matter what I try. The only way to get them responding is to pull the power plug on the time capsule and power back on. This needs to occur each time I want to access either drive. When attempting to connect via finder I get connection failed errors.
I have no connectivity problems with airport. Access to network is fine, so I know the TC is not totally dead, just the part that lets me access the hard drives. It is interesting that time machine appears to be able to access the drive on the tc without problem but I'm not sure how confident I am that this is true just because it is telling me so.
Any suggestions? anyone else seeing this?

I am having this issue as well.
The behavior seems to be that the drives are available after a reboot and for some time afterwards. Then at some indeterminate time, the drives become unavailable. The Time Machine backups stop with a "Backup Delayed" message and I have to go to the Time Capsule and reboot it by removing the power and re-inserting it.
When the drives are unavailable, the wireless router functions are still active since I use this router as my gateway to the internet.

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

HT201299 Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app

Is there an App which switches on Cellular data at a Particular time of day and switches off as well? if not someone should make an app for that

No, there are no apps that can do that, as no app would have access to the necessary API's to perform such a task.

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

You will need to install the printer on your Mac
Open System Preferences (gear icon) on the dock
Open Print & Fax
Click the + (plus) button at the bottom of the printer list
Wait for your printer to appear in the next box, then click it to highlight it
Click Add at the lower right
Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

Can I Partition a Time Capsule? and more...

My existing setup consists of an Airport Extreme wirelessly supporting 2 MacBooks ("MBs") 5 iOS devices, 2 WiFi/Airprint printers and then by wire (Ethernet) a couple of other devices. In addition, the Extreme has a USB external hard drive visible/accessible to both MBs. Both MBs have their own external hard drives configured as Time Machines. All devices have latest software upgrades/updates.
I am thinking of replacing the Extreme with a 3TB Time Capsule ("TC") and I propose to Partition the TC's drive into 3 – with one partition supporting MB1's TM, the second supporting MB2's TM, and the third partition supporting/acting like a common hard drive (the same as exists external on the Extreme). The existing external hard drives acting as TMs would be set aside and saved for TM recoveries; the TC situate TMs would simply commence as new TMs (I envision difficulties not worth the effort in moving the existing TM backups to the TC).
Query 1: Can the latest 3TB Time Capsule be partitioned as I have proposed? (The reason I pose the question is a series of discussions dating back to 2012 that indicate a TC cannot be partitioned but the current Apple Store page for the 3TB TC indicates a TC can support multiple TMs: "you can back up all the Mac computers in your home to a central location.") A review indicates the TC established at least two TMs automatically, but I'd like to also dedicate some space for a third partition non-TM drive….so, the Q – can I partition a TC?
Query 2: Would I just be better off not trying to partition the TC and just letting it support two TMs automatically and plugging in a separate hard drive, as I currently have? (Why hasn't Apple upgraded the USB connection to 3.0? oh, well, they probably will a month after I buy mine, right? )
Query 3: When moving the existing MBs from desk to couch it is necessary to first eject the existing TM external hard drives. If the TMs are moved to (or replaced by) a TC that would appear to no longer be necessary – because they aren't physically connected anyway. (Having typed this it seems so obvious, but….I'm asking because I just want to confirm.)
Any other suggestions/observations/watch-its would be welcomed. Thanks.

Query 1: Can the latest 3TB Time Capsule be partitioned as I have proposed? (The reason I pose the question is a series of discussions dating back to 2012 that indicate a TC cannot be partitioned but the current Apple Store page for the 3TB TC indicates a TC can support multiple TMs: "you can back up all the Mac computers in your home to a central
The Time Capsule drive cannot be partitioned in a traditional sense unless you pull the drive from the Time Capsule (which voids the warranty), place the drive in a SATA to USB caddy or enclosure, attach the caddy directly to a Mac, and then use Disk Utility for the formatting operation. Once that is done, then you have to reinstall the drive back in the Time Capsule. Not a job for the faint of heart....and best left to a technician.
The Time Capsule "as is", can support multiple Time Machine backups from different Macs, but is basically a free for all as far as space is concerned. Time Machine backs up to a special file called a sparsebundle on the Time Capsule, and while it is possible to modify or limit the size of the sparsebundle file for each Mac, it is a complex operation. This document will give you an idea of the process:
http://pondini.org/TM/A8.html
Query 2: Would I just be better off not trying to partition the TC and just letting it support two TMs automatically and plugging in a separate hard drive, as I currently have?
Much simpler, therefore much better to do it this way.
Query 3: When moving the existing MBs from desk to couch it is necessary to first eject the existing TM external hard drives. If the TMs are moved to (or replaced by) a TC that would appear to no longer be necessary – because they aren't physically connected anyway. (Having typed this it seems so obvious, but….I'm asking because I just want to confirm.)
Time Machine will automatically back up to the Time Capsule once you have it set up. No need to mount, or eject the drive, etc.
Any other suggestions/observations/watch-its would be welcomed.
The current version of the Time Capsule will be two years old in June....and Apple traditionally introduces new products in June.

I got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?

got an error message saying "an error occurred while creating the backup folder". I have tried deleting the plist and am using the latest time capsule software and using OS Lion Any ideas what to do please?

See #C10 in Time Machine - Troubleshooting.

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Time Capsule (Tower) and Airport Express

I have a new Time Capsule (Tower) and want to extend the range in my house using an Airport Express. However, I cannot get the A/E to connect, and I cannot see the A/E when I open the Airport Utility. What am I doing wrong. Thanks.

Unfortunately, extending using wireless is going to result in a significant speed reduction on the network.
Power off both AirPort Express devices
Wait a minute
Power up the A1264 for a minute or two
Hold in the reset button on the Express for 8-10 seconds and release
Allow a full minute for the Express to restart to a slow, blinking amber light
On your Mac, click on the AirPort icon at the top of the screen
Click on AirPort Express under the setting of New AirPort Base Station
The setup utility will open up. Follow the prompts
Set up the other Express the same way.

Difference between Time Capsule 2009 and 2011

What is the spec difference between Time Capsule 2009 and 2011? I am looking at refurbished Time Capsules and the discriptions dont really help me.
• 2 TB, w/Simultaneous Dual-Band Wi-Fi, Originally released October 2009 – $249 CAD
• 2 TB, Originally released June 2011 – $259 CAD
tnx

jizzlets wrote:
I dont get what the "Simultaneous Dual-Band WIFI" means. Is that a good thing?
Means it uses both 2.4ghz band and 5ghz at the same time.. Most N wireless is 2.4ghz.. some can do either 2.4 or 5ghz.. but not at the same time.. TC can do both at the same time. It is a good thing.
Also, is it a good thing that it has been used 6-12 months?
No, it is not good.. but you have no idea of the history of the product. For a time capsule that matters. If it has been used for 12months, that comes off the lifespan at the other end.
For what you save buying new might be well worth it.

Time Capsule, MFP, and scanning via USB switch

Has anyone tried to share a multi-function printer between Time Capsule and an iMac using a USB switch?
The TC and the printer work fine together for wireless printing, but I'd like to be able to use the MFP's scanner with my desktop without swapping the USB connection each time. Has anyone gotten such a setup to work, and if so can you recommend a particular USB switch?
I would connect the iMac to the printer by USB via one branch of the switch, while the other branch would connect the TC to the printer for wireless printing.
I know that another solution would be to connect the iMac to the printer and share the printer using OS X's printer sharing feature, but I'd like to avoid forcing the iMac to remain on in order to print.
Hardware: Canon Pixma MP830, iMac (2.7 GHz Core i5, running Lion), Time Capsule (4th Gen., 2TB)
Thanks in advance for any advice.

Please explain exactly what you mean by "plugging the NAS into the ethernet port on the imac and the TC via USB". I can't picture how you have things connected.
I'd plug the NAS and your iMac into Ethernet ports on the Time Capsule. If you want to assure that you're copying over Ethernet, then turn off AirPort on the iMac.

I have a current 2TB Time Capsule. I would like to add more ethernet ports for needed expansion. Will an Airport Extreme conflict with the Time Capsule for needed ethernet ports and will wireless from both units conflict?

I own a current 2TB Time Capsule and I need to expand my network system to include more ethernet (wired) ports. I am considering an Airport Extreme that would give me enough wired ports. Will the wireless capabilities of both units conflict with each other? I only need one wireless network. Thank you for any help.

While you could certainly add an AirPort Extreme to provide additional Ethernet ports, you could also save about $150 by purchasing an inexpensive switch, such as one of these:
http://www.amazon.com/D-Link-DGS-1005G-5-Port-Gigabit-Desktop/dp/B003X7TRWE/
http://www.amazon.com/TRENDnet-Unmanaged-GREENnet-Auto-Negotiation-Auto-MDIX/dp/ B001QUA6R0/
Consumer grade Ethernet switches typically come in five and eight port configurations. Just be aware that a five port switch only conveys the ability to add three additional devices. An eight port switch conveys the ability to add six additional devices.
An 8 port switch provides twice the capacity of a 5 port switch for considerably less than twice the cost. The price difference between the two is often only $10 or so.
I just checked, the 8 port version of the Trendnet switch above costs exactly $4 more.
An AirPort Extreme is a very flexible full featured wireless router, and would provide three additional LAN ports for wired devices. If all you need is a few more ports though, it's overkill.

Time Capsule, NAS and Switch port issues

Similar Messages

Maybe you are looking for