Time Capsule network and IOS devices

I have a time capsule set up to run my wireless network. Two iMac computers both see and recognize the network. A PC does not see it. An older Macbook does not see it. Additionally, 2 iPads and 2 iPhones do not see the network and can not join it. What am I doing wrong? Thanks.

The PC and iOS devices... can fail for a number of reasons.. but this usually fixes it.
1. Change the TC and wireless names to SMB type.. ie so the PC will work. Short, no spaces.. pure alphanumeric. I recommend making the 5ghz name different to the 2.4ghz name.
2. Fix the channel used by 2.4ghz.. do not leave it auto.. there are only three channels that do not overlap, 1, 6, 11. Pick one.. if you don't get good signal pick another. I would suggest you start from 11.
3. Use WPA2 Personal security with a 8-12 character passkey. Again pure alphanumeric.
If you still have trouble..give more info about your network..
what broadband type and modem you have?
What mode the TC is in, router or bridge?
Are you testing the iOS devices close up? Do not expect too much range on the TC.

Similar Messages

Time capsule network AND modem possible with maverick?

Hey all. At home I have a small time capsule network at home and use a Huawei modem to connect to the internet. Since the update to mavericks it is impossible to run both at the same time. Now I have to choose between internet connection (Huawei) and my local network (time caps). How can I connect to them both at the same time again? Thanks.

Hi, jackthebulldog. Welcome to the forums!
What happens if you enter 192.0.32.10 into Safari's address bar? Does it still load the Comcast activation page, or does it go to a page with some text about "example.com"?
Message was edited by: adsfushi72

How do I add an airport extreme to existing time capsule network and be able to use the router ethernet ports?

Good day everyone. I recently upgraded my airport extreme network by replacing the base station with a time capsule router. Since I now have an "extra" airport extreme router, I've set it up on the other side of the house to both extend the wireless range as well as use it's LAN ports for a home theater system in that location. Connecting the two routers was done via ethernet. It now appears that I need to do something "else" as the LAN ports on the now relocated airport extreme are nonfunctional. All devices are operating well for wireless and as a review, the modem is connected to the time capsule WAN which is connected to the airport extreme via ethernet cable via LAN to it's WAN port. What do I need to change on configurations to get the LAN ports functioning on the airport extreme? Thank you for any help.

Connecting the two routers was done via ethernet. It now appears that I need to do something "else" as the LAN ports on the now relocated airport extreme are nonfunctional.
With both base stations interconnected by Ethernet you have the basis for a "roaming" type network. If properly configured, both base stations' Ethernet ports would be enabled for wired clients.
The key configuration items for a roaming network are as follows:
All base stations used must be interconnected by Ethernet.
The "main" base station; the one connected to the Internet modem, must be configured to provide both NAT & DHCP services; all other base stations used must be configured as bridges (NAT & DHCP disabled.)
Each base station must have a unique base station name.
Each base station must use the same wireless security type and password.

Access Time Capsule disk from iOS device (iPad, iPhone)

My intended goal is to use Time Capsule disk as cloud replacement for MobileMe iDisk which is being discontinued in June.
I've done Time Capsule 7.6.1 update with iCloud support, entered my iCloud account settings, and authorized disk access via WAN. Everything appears to be configured properly as I can access my Time Capsule disk on Mac computers from outside my home network. How do I access this disk on iPhone and iPad?

I use FileBrowser app. It works. Their latest version is much easier to configure than earlier versions. You need to turn file sharing on and SMB on your time capsule disk.
I use the time capsule disk to store a few files which I never want to be on my iPhone or iPad, but do want access to them. They are not backed up on the time capsule but since they also exist on my Mac, they are backed up from there.

Time Capsule Network and Comcast

I have a new iMac and Time Capsule. I have plugged my time capsule into a modem, and have set up a wireless network on my iMac. When I attempt to access the internet via Safari, I get a Comcast activation page. I have entered my Comcast account number into the page and get prompted to download Comcast software. I have tried to do this and get an error. Do I need to download the Comcast software? I'd strongly prefer not to download it.

Hi, jackthebulldog. Welcome to the forums!
What happens if you enter 192.0.32.10 into Safari's address bar? Does it still load the Comcast activation page, or does it go to a page with some text about "example.com"?
Message was edited by: adsfushi72

Time Capsule Network and Airport Extreme Configuration

I have a hybrid wireless and wired network in my home. TC is my primary router. I have a switch hanging off of the TC that distributes the ethernet around the home. To extend my wireless reach with an Airport Extreme, can/should I 1) plug the Airport into ethernet at the opposite end of the home, or 2) connect the Airport wirelessly to the TC? What are the implications of both?

The letters (N, B, G) refer to the speed of the wireless network. The higher the letter (N currently) the faster the wireless network. The Airport Extreme & TC's currently sold are the 802.11N version, 802.11 is just a number and refers to a set of standards for wireless local area network. Therefore if you here 802.11 you know they are referring to a wireless network and what ever letter follows (B,G and now N) referrs to the speed of that network. However remember this works at the lowest common denominator. What I mean by that is let's say you have a wireless router (like TC) that works at N speeds and you want it to communicate with a wireless printer but that printer is B speed well your router is going to adjust to the B speed so it can communicate to the printer.
Hope this helps a little.
Roger

Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

Time Capsule Network Freezes and Locks Up

I have been having major streaming issues to my Apple TV for a few months now.
Basically, the streaming performance is poor, and after 20 or 30 minutes, the movie that is playing freezes, then the entire wireless network created by the Time Capsule stops working. Anything hooked up via Ethernet however still does work. Only the Time Capsule Network fails. This happens every time I reboot the Time Capsule. I have also started over and reset the device.
I had Apple replace the Time Capsule (gen I, 500 gig), and had my cable company replace my modem. Neither one of these things solved the problem at all. It is still happening.
I have the cable modem running into the Time Capsule, then the Time Capsule runs into a router that sends wired ethernet through various points in the house (although at this time only 1 compute is still hard wired).
I have no idea what is causing this. Could this be an Apple TV issue? Why would it cause the entire network to crash?

The issue was resolved ages ago but I don't remember how....... sorry.

Time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

At a guess you have cable internet connection.. please confirm exactly what you have.. two public IPs are allowed by some ISP.. once you use up the two IPs, there are no more..
Make sure the TC is in router mode. And to get it working you probably need to shut off the cable modem.. if it has battery backup remove the battery.. try 5min off .. if not long enough try 20min off. then overnight. The ISP equipment must reset to allow a new MAC address to capture the IP.
If you cannot work it out.. plug in the old router again.. and set the TC to bridge mode.. which I suspect it is in now.. and plug it into the main router.. it should work fine like that.

Hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear a

hi i would like to know how to extend the range of my time capsule wifi network(500G 802.11n) using an airport express. i have a double storey home and would like to extend range to my upstairs bedrooms.i have a time capsules network setup via a netgear adsl.i have a second imac upstairs which connects to time capsule wifi network (it is within range as it is directly abobe on 1st floor)
could you tell me how best to set airport express up to extend my wifi range?

Greetings,
This is called an "Extended wireless network".
Read this article for details and steps on how to extend your TimeCapsule's network:
http://support.apple.com/kb/HT4259
Cheers.

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

It's not a good idea to use a network disk for both Time Machine backups and other things. By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files. I'd store those other files on an external disk connected to the Time Capsule. The problem with that is that Time Machine will only back up files that are local to your Mac. That means that you'll only have one copy of the files on or attached to your Time Capsule.
By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject. In the future just type a short summary of your post into that field and type the whole message into the field below that.

Advice to extend range from Time Capsule - wireless and ethernet with Airport Express and Airport Extreme

Current wireless network is Time Capsule (connected to a Cisco router, 1GB switch to servers and printer 1) to Airport Express (wireless) and to Airport Extreme (wireless). Distance means poor signal at the Extreme which has 2 printers (ethernet cables) and an iMac (wireless)
Solution is to connect the Extreme to the Time Capsule via Cat 6 ethernet cable
How do I configure the TC and the Extreme?
I will keep the Express for a wireless extension to the TC

Wired Ethernet from the TC to the AirPort Extreme will result in much better performance. It sounds as if you are not configuring the AirPort Extreme correctly.
Please try the following steps carefully:
Unplug the Ethernet cable from the AirPort Exteme if it is not already unplugged. With the AirPort Extreme powered on, hold in the reset button on the Extreme for 10 seconds and release. Allow a full minute for the Extreme to restart
Connect the Ethernet cable to the WAN "O" port on the Extreme.
Click the AirPort icon at the top of the Mac's screen and wait a few seconds for a listing of New AirPort Base Station to appear. Just below that, click on AirPort Extreme.
The example below displays an AirPort Express. You will see AirPort Extreme.
AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Extreme will be configured to extend the Time Capsule network.
Enter a device name that you want to use for the Exterme and click Next
Wait a minute while AirPort Setup configures everything for you. When you see the message of Setup Complete, click Done.
That's it. Pretty simple. Things should be working fine now.

Can I Partition a Time Capsule? and more...

My existing setup consists of an Airport Extreme wirelessly supporting 2 MacBooks ("MBs") 5 iOS devices, 2 WiFi/Airprint printers and then by wire (Ethernet) a couple of other devices. In addition, the Extreme has a USB external hard drive visible/accessible to both MBs. Both MBs have their own external hard drives configured as Time Machines. All devices have latest software upgrades/updates.
I am thinking of replacing the Extreme with a 3TB Time Capsule ("TC") and I propose to Partition the TC's drive into 3 – with one partition supporting MB1's TM, the second supporting MB2's TM, and the third partition supporting/acting like a common hard drive (the same as exists external on the Extreme). The existing external hard drives acting as TMs would be set aside and saved for TM recoveries; the TC situate TMs would simply commence as new TMs (I envision difficulties not worth the effort in moving the existing TM backups to the TC).
Query 1: Can the latest 3TB Time Capsule be partitioned as I have proposed? (The reason I pose the question is a series of discussions dating back to 2012 that indicate a TC cannot be partitioned but the current Apple Store page for the 3TB TC indicates a TC can support multiple TMs: "you can back up all the Mac computers in your home to a central location.") A review indicates the TC established at least two TMs automatically, but I'd like to also dedicate some space for a third partition non-TM drive….so, the Q – can I partition a TC?
Query 2: Would I just be better off not trying to partition the TC and just letting it support two TMs automatically and plugging in a separate hard drive, as I currently have? (Why hasn't Apple upgraded the USB connection to 3.0? oh, well, they probably will a month after I buy mine, right? )
Query 3: When moving the existing MBs from desk to couch it is necessary to first eject the existing TM external hard drives. If the TMs are moved to (or replaced by) a TC that would appear to no longer be necessary – because they aren't physically connected anyway. (Having typed this it seems so obvious, but….I'm asking because I just want to confirm.)
Any other suggestions/observations/watch-its would be welcomed. Thanks.

Query 1: Can the latest 3TB Time Capsule be partitioned as I have proposed? (The reason I pose the question is a series of discussions dating back to 2012 that indicate a TC cannot be partitioned but the current Apple Store page for the 3TB TC indicates a TC can support multiple TMs: "you can back up all the Mac computers in your home to a central
The Time Capsule drive cannot be partitioned in a traditional sense unless you pull the drive from the Time Capsule (which voids the warranty), place the drive in a SATA to USB caddy or enclosure, attach the caddy directly to a Mac, and then use Disk Utility for the formatting operation. Once that is done, then you have to reinstall the drive back in the Time Capsule. Not a job for the faint of heart....and best left to a technician.
The Time Capsule "as is", can support multiple Time Machine backups from different Macs, but is basically a free for all as far as space is concerned. Time Machine backs up to a special file called a sparsebundle on the Time Capsule, and while it is possible to modify or limit the size of the sparsebundle file for each Mac, it is a complex operation. This document will give you an idea of the process:
http://pondini.org/TM/A8.html
Query 2: Would I just be better off not trying to partition the TC and just letting it support two TMs automatically and plugging in a separate hard drive, as I currently have?
Much simpler, therefore much better to do it this way.
Query 3: When moving the existing MBs from desk to couch it is necessary to first eject the existing TM external hard drives. If the TMs are moved to (or replaced by) a TC that would appear to no longer be necessary – because they aren't physically connected anyway. (Having typed this it seems so obvious, but….I'm asking because I just want to confirm.)
Time Machine will automatically back up to the Time Capsule once you have it set up. No need to mount, or eject the drive, etc.
Any other suggestions/observations/watch-its would be welcomed.
The current version of the Time Capsule will be two years old in June....and Apple traditionally introduces new products in June.

Can't change permission on Time Capsule files and folders

I am using my Time Capsule as a storage device that everyone on my network can access, and I also have a fairly small (~5000 songs) iTunes Library as well. This was all working fine, until I decided to try to get a second computer, beside my MacBook Pro (8,1) to connect to the iTunes Library. Suddenly strange things started happening, like the network dropping at seemingly completely random times, certain people being kicked of the network, etc. So then I thought "well maybe its because of the iTunes Library." So I did a 'Get Info' to the Library folder, named iTunes Library, and it showed this:
This didn't seem too strange, except for the (unknown) name. I then learned (http://pondini.org/TM/E10.html) that this may actually be causing the problem, so I hit the minus button while hovering over it, only to see this:
Now, as far as I can tell, this shouldn't be happening. So I tried it on many different computers (10.8.4, 10.6.8, 10.7.5, among others), and they all said this. Then, back on 10.8.4, I decided to try to add my name, even though it said that everyone can read and write, and it said this:
Now I knew this was strange, since it has never, ever happened to me since OS 7. What was also strange, instead of showing the usual selection window, it asked me to type in my username, like so:
This happened on every computer, and in every directory and every file (or at least the couple dozen I tried, including ones outside the Library folder that I had already changed permissions on before normally), so I knew something was definetly up. So of course, I turned to my friend, the Terminal. I tried doing sudo chmod 555, 755, 775, 777, and a+x, and none of them worked, again, on multiple different files and folders. Also, since I have connected the second conmputer to the Library, it seems as though the file iTunes Library.itl is no longer executable, because it looks like this:
Also, no one but me can connect to it anymore, even though they can all see it. Any help would be greatly appreciated.
EDIT: Sorry for the low-res images, Apple seems to have done something to them

Verify volume failed with error Could not unmount disk (-10000)
That could happen if there is another process that is presently accessing the volume. I don't think it related to the volume having data corruption. The fact that is it a "server" may be relevant.
In the time that you have had this problem, has it been shut down and restarted?
You can also try restarting it with the Shift key held down. That should do a Safe Mode startup, if an Xserve acts like a regular Mac.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
The Safe Boot will do some maintenance and tests during startup, and start up with only essential proceses running. Try accessing that folder now. If you can access it, you should probably save it off on another volume, such as an external drive, so that you have a current backup.
Try running Repair Disk Permissions and Verify Disk again in Disk Utility. Repair Disk Permissions will probably give you a lot of messages; they are usually just "informational" so don't be concerned. However, if Verify Disk reports an error, that is a serious problem that needs to be addressed.
Edit: If the volume being tested is NOT the startup disk, then Repair Disk Permissions will be disabled. It only applies when there is a system installed on that volume.

Time Capsule network and IOS devices

Similar Messages

Maybe you are looking for