Time Capsule Not showing in Disk Utility

Right, There are a few things for my case:
Disk Utility doesn't show anything related to the Time Capsule.
There is a .purgeable in the disk in an attempt to delete the whole back up due to speed issues (using TM to delete it)
I can't delete the .purgeable file with Finder or tmutil
It doesn't back up because of the partially deleted image (It doesn't give an error, it's been like that for many many hours, tho)
I have files in a folder in the time capsule which stop me from trying to completely erase the content of it.
I have already resetted the laptop, networl, and time capsule
Anyone can help me, please?
I'm using Mavericks and Airport Utility 6.3.2

Disk Utility will not display a network drive. It will only display a drive that is connected directly to your Mac using USB, FireWire, or Thunderbolt.
If you want to erase the disk on the Time Capsule......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Disk tab at the top of the next window
Click Erase Disk
The Quick Erase option will only take a few minutes
Zero Out will replace everything on the drive with zeros, probably taking 4-6 hours
Click Erase

Similar Messages

Time Capsule not Showing in Airport Utility

I decided to re-set my Time Capsule this afternoon. The green light is on but it is not showing in the Airport Utility and Time Machine says there is no back up disc available.
What can I do?

Temporarily, connect a spare Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Restart both your Mac and the Time Capsule and then open AirPort Utility to see if your Time Capsule has been found.
If the Time Capsule is still lost, disconnect the Ethernet cable and perform a Factory Default Reset on the Time Capsule as follows:
Pulll the power cord from the back of the Time Capsule
Wait a few minutes
Hold in the reset button and keep holding it in while you plug the power cord back in to the Time Capsule
Keep holding the reset button an additional 8-10 seconds and then release the button
Allow 30-40 seconds for the Time Capsule to restart to a slow, blinking amber light
Connect the spare Ethernet cable from your computer to one of the LAN <-> ports and open AirPort Utility to reconfigure the device

Time Capsule Not Seen By Disk Utility, Not On Desktop

My 1T TC works like a champ and backs up as expected. Can TC be used as an ordinary external HD in addition to being the location of TM back ups. The TC does not appear on my desktop and is not discovered by Disk Utility.

Rocky,
Be very careful with the xxxxxx.sparsebundle file. That is an image of all of your Time Machine backups. Leave it alone unless you want to delete all of your backups.
If you do want to delete your Time Machine backups, use the gear icon just above the xxxxx.sparsebundle file. Click the .sparsebundle file to highlight it and select Move to Trash. This is only safe way to do this.
There is also an alternate way to delete your backups and wipe the Time Capsule clean if that is what you want to do. Open AirPort Utility, select Manual Setup, click on the Disks icon, then click on the Disks tab just below that and select Erase. This is probably the better option if you want to start over with a clean disk.
Now, if you want to create a folder or folders on the Time Capsule to move files into, use that same gear shaped icon in the preceding paragraph and select New Folder. Once you see the folder, you can rename it as needed. Create more folders in the same way. You can drag files into the folder from the desktop.
I haven't tried any kind of automated backups into the folders and don't know if this might be possible.
If you add folders and keep your Time Machine backups, Time Machine will leave the folders alone even if the TC is full and deleting old backups to make room for new Time Machine backups.
Hope this helps. Just be careful and you will be fine.

Time capsule not showing in airport utility? recently moved house and new internet set up!

Hi
I had a time capsule set up and working perfectly then we moved house, changed ISP and now time capsule light is flashing amber. When I open the Airport Utility only the internet (i.e. a globe) shows, no time capsule. My Macbook Pro has no ethernet port or I would have tried hardwiring! I can enter the time machine but back up history is red.
I read that latest OS may require a rename of the capsule if the original name was long (29 characters including spaces at present) but to change it the support says to access it via the airport utiltiy which I can't do!
Help anyone?!
Sam

Simply factory reset the TC and start over.
Any time you move the network configuration the TC will require a new configuration.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Time Capsule not visible in disk utility

i'm trying to create a disk image on my time capsule to so i can store some seperate media files and the time capsule is not available in the disk utility when its connected via the network. do I need to be connected through and ethernet cord for this to work?
Thanks.

When you click New Image, a setup box will appear.
Make sure that the little arrow in the top box next to Save As appears in the "up" position
Look for your Time Capsule under the SHARED heading in the Finder window on the left
Click the Time Capsule icon
Then double click on the Time Capsule folder to the right
Type a name in the Save As box at the top
Name the Disk Image
Select the size of image that you want
Keep the format of Mac OS Extended Journaled and single partition and read/write disk image
Click Create
It takes about an hour for a 25-30 GB disk image to be created, so do this using Ethernet. Allow 3-5 times longer if you do this using wireless
Some users find it easier to save the Disk Image to the desktop and then move it over the Time Capsule disk, but this takes longer.

Thunderbolt WD Duo, does not show in Disk Utility

Hi Have imac 27 (late 2012) with 10.8.3 update OSX. Connecting to WD Thunderbolt Duo, the disk does not show in disk Utility, sys log or in any connection to the system. WD utility does not seems it either. Restart does not help. By disk returning to seller, the disk works fine on other comp (with the same cable, with the same power adapter)
Is there any issue known with the thunderbolt ports? Tried both all found on internet, but no resolution, to my issues.
Seems to be my imac hardware or maybee the software (thunderbotl 1.2) update.
Lukas

All thunderbolt port tried, cable exchanged, no change
I have done following procedure , no change
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

HT1338 I erased my Time Capsule HD using the Disk Utility on my Vista computer

I erased my Time Capsule HD using the Disk Utility on my Vista computer and I now can not see my TC in my computer. I tried to remap it by right clicking my computer and selecting remap drive, but after selecting Z drive I cannot find TC in browser. Not sure if I did something wrong but it was working fine before I erased it. Any help would be greatly appreciated.

To erase the OSX on your harddisk you have to boot your Mac from the OSx Install DVD that came with your Mac.
You can't erase the OSx from which your Mac is booted.
http://support.apple.com/kb/HT3910
Stefan

Time capsule not showing old backups

i bought the time capsule in the middle of october and set it up. but when i got into the time machine to find the old backups it only shows the oldest back up as november 13th, and each day it moves to the next. ex tomorrow it will show the oldest as november 14th. and when i look at the time capsule i have only used 1.96 of the total 2 TB. the "tick" marks on the side of the time machine dont always show the pink, which means it was backed up to the time capsule. it shows grey marks saying it was saved on the mac(as if i was not connected to the time capsule)

I'm using the Time Machine interface from the original icon in the dock.
I figured it out. Just a minute ago I went to Time Machine, it mounted the backup and showed it on my desktop but when the "space" view came I wasn't able to browse anything. It didn't show any dates. I exited Time Machine and immediately went back and now I was able to browse all the backups and all the backup dates were shown. I tried it later and again I couldn't browse my backups. This time I waited and finally they showed up and everything worked. It just seemed to take a long time for the backups to be browseable.

External hard drive not showing in disk utility

my samsung external hard drive has always worked with no problem on my mac..
I have just plugged it in to do some work and it will not appear anywhere..
not even in disk utility
i have tried the USB port and it is working fine because i also have a mouse and that worked fine in that port..
PLEASE SOMEONE HELP ME!

Try following tips.
USB and FireWire Quick Assist - Apple Support

Time Capsule not showing up in AirPort Utility

Hi,
I'm having problems setting up my Apple time capsule, but have successfully managed to set up an Airport Express.
Im using a Virgin Media cable modem which is connected to a netgear wireless router. I've tried connecting the Time Capsule to the router (which is how i set up TC in my previous house)
The current set up is looking like this but Airport cannot find the TC
Cable Modem -> Ethernet -> Router -> Ethernet from Port1 on Router -> Port1 on TC
I have tried connecting it to the main connection ethernet port on the TC, Infact I've tried every cable configuration imaginable, but the TC still isnt getting recognised.
Has anyone else had this problem or got any suggestions as to how I can get this to work?
Thanks in advance
Matthew

First and formost, you're connecting an airport router to a router, you'll need to place your Airport in bridge mode when you set it up for better reliability. Reset the TC by holding the rest button on the back until the light on the front flashes rapidly. On your Mac, go to the Airport menu item in the upper right hand corner of the screen next to the time of day. Select the Apple Network from the drop down menu, it should then appear in the utility, rescan if it doesn't, if still not I can only guess you're running a older version of the utility, run software update.

Should Time Capsule be visible in Disk Utility

I don't see Time Capsule as a HD drive in Disk Utility. I also can't see it using Data REscue II. It there something wrong with the Time capsule ? How do you restore repair or recover data from the time capsule?

Each of the backups on the Time Capsule is a sparsebundle. You can see the sparsebundle(s) by clicking on Time Capsule under Shared in a Finder window, then after a moment or two you can double click on the Time Capsule folder. To attempt to repair a backup, do the following. Bear in mind that the Repair function could take a few hours. I prefer to run it overnight so I don't stress about it. There's nothing like reviewing Repair messages over steaming hot cup o' java.
- Turn off Time Machine on the Mac that backs up to the sparsebundle in question. (The Mac's name is in the sparsebundle's name).
- Double click on the sparsebundle.
- Once the "Opening" dialog appears, click "Skip" to skip the check.
- You have now mounted the virtual backup drive stored in the sparsebundle -- it shows up under your list of Devices in the Finder window.
- Open Disk Utility
- Select "Backup of [machine name]" in the left pane
- Select the First Aid tab if it's not already selected
- Click on Repair disk
- Give it a few hours.
Sometimes, if the sparsebundle can't be repaired, the solution is to delete the sparsebundle and start over. Perhaps Data Rescue works on a mounted sparsebundle -- I'm not sure.
It's unlikely you need to repair the Time Capsule's drive itself, as it usually has very few files on it (just the sparsebundles), and it's disk directory is rarely updated.

External hard drives not showing in disk utility

When I connect a new Eagle/Consus W-Series external hard drive enclosure to my 15" PB, the hard drive doesn't show-up in the left hand pane of the Disk Utility window. The only thing that shows is the drive in the PB. The hard drive in the enclosure is a WD SATA and is connected via USB cable. The same thing happens, or doesn't happen, when I'm connected via ethernet to my G5 2.3GHz Dual Core: when I open Disk Utility on the PB, the drive on the G5 doesn't show. What I'm trying to attempt is to mirror/clone Tiger from my PB onto the new, to me, G5 using SuperDuper.

Hi, Bob. I obviously didn't understand the situation properly, and now that I realize that, I'm afraid I still don't.
When the G5 is connected, via ethernet to my PB, the hard drive does not show-up in the PB's disk utility pane.
The G5 doesn't have a hard drive in it now, is that correct? So why connect it via Ethernet to the Powerbook?
If you're trying to clone the Powerbook's hard drive onto the G5's drive inside the external enclosure, all that needs to be connected is the external enclosure to the Powerbook, via USB cable. The G5 itself isn't involved in that process at all. When the G5's drive is in the enclosure and connected to the Powerbook, does it appear in Disk Utility on the Powerbook? If not, see my previous suggestions, with the exception of my comment about it not working with either computer.
If the SATA hard drive doesn't appear on the Powerbook's desktop or in Disk Utility when it is in the G5 and the computers are properly networked via Ethernet, recheck your sharing settings: the G5's drive must be shared to be visible to the Powerbook. In that mode, you may not be able to clone the Powerbook's drive to the other one, because the drive in the G5 is being used to run the G5. But if the G5's drive is partitioned, you should be able to clone the Powerbook's drive, via Ethernet, to a partition other than the one which contains the OS that's running the G5.
While the hard drive is in the external enclosure, I can hear it spinning, and am assuming that all the connections are working properly.
If the drive spins, you can be sure it's getting power, and that's good. But you can't safely conclude from that that any or all of the data connections are working properly; in fact the evidence suggests the contrary.
In short, there may be not one but two problems at work here: incorrect sharing settings when the two computers are networked, and a bad cable, connection, or enclosure when the drive is connected to the Powerbook via USB.
EDIT: Let me also add that if the only Tiger installer discs you have are the ones that came with the Powerbook, then having copies of that Tiger installation on both of your computers would be a violation of the software license that accompanied those discs, which entitles you to have Tiger installed on only one computer at a time. If that's the case, you should really buy a retail Tiger installer disc to use on the G5.
Message was edited by: eww

Time Capsule not showing up in finder

I have a new TB TC and I had a failure the first time trying to back up. I then noticed when I restarted the backup the ata speed was very slow over a 100baseT network connection. It finally finished and then did a bunch of backups during the day but the disk was not showing up in the finder. When I would manually start the backup the disk would show up in the finder window but as soon as it was done it would disappear. It did this for a while then I had a serious problem where time machine could not find the TC at all. I had to reboot the machine. It now seems to be ok after the reboot but I am wondering about the stability of the TC. Has anyone had similar problems or offer any fixes. Its connected to a brand new Imac

Did you try the reset button on the back?
To reset the Time Capsule password:
Use something pointed to press and hold the reset button for one (1) second.
Important: If you hold the reset button for more than one second, you may lose your network settings.

Time Capsule not found in airport utility

I have a 2nd gen time capsule that is having some difficulties. It seems like it has been since the latest (7.6.1) update.
After a while, my wireless clients cannot connect to it, and it won't show up in the AirPort utility. If I power cycle it, it shows up again, and clients can connect.
When it isn't listed, the light on it is still green.
It ALSO seems that the time machine can back up to it still .
Any ideas?

It may help to power cycle the entire network if you have not already done so. This will get everything back in the right sequence on your network.
Just power everything off in any order that you want
Wait a minute or two
Start the modem first and let it run a minute by itself
Start the next device connected to the modem the same way
Keep starting devices one at a time a minute apart until everything is powered back up

Macbook Pro 2012 HDD not mounting/not showing in disk utility

I opened the macbook to find all apps freezing, nothing would work. So i did a hard shutdown and restarted the machine, and when it booted i just got the flashing folder icon. I re-booted into internet recovery, and went in to Disk Utility and found that the hard drive was not mounting and showing in there. I swapped the hard drive with a spare SSD and it worked fine, so it's not the cable. Also when i boot up, i can hear the hard drive spinning so its not completely dead. I have booted it up as a target disk with the iMac and it still will not appear. There's some photos and other bits that i really want to recover from this drive. Any advice?

Okay, so i have held off going to an Apple store because i wanted to recover the data from the hard drive before repair/replacement. I fitted a 120GB SSD drive which worked fine until today when i opened it up and the same thing occurred. It would seem that it is not the hard drive that had a problem, but perhaps a software issue. I managed to boot up once after the crash and the error report listed a kernel panic as the root of the problem. Here is the full report, which i also got the first time it happened...
Anonymous UUID:       810341CF-8185-F411-7C6C-347DC4B4CDBA
Wed Aug 27 01:24:36 2014
panic(cpu 1 caller 0xffffff80226dc24e): Kernel trap at 0xffffff802267bf83, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x000000000000003c, CR3: 0x000000004de2c03d, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000000000, RCX: 0x00000000cbb09500, RDX: 0x0000000000000821
RSP: 0xffffff8144263ac0, RBP: 0xffffff8144263af0, RSI: 0x0000000000000000, RDI: 0xffffff8022c9f500
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff8022cd1600, R11: 0x0000000000000000
R12: 0xffffff8022c9f500, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000040000
RFL: 0x0000000000010286, RIP: 0xffffff802267bf83, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x000000000000003c, Error code: 0x0000000000000000, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8144263750 : 0xffffff8022622f79
0xffffff81442637d0 : 0xffffff80226dc24e
0xffffff81442639a0 : 0xffffff80226f3746
0xffffff81442639c0 : 0xffffff802267bf83
0xffffff8144263af0 : 0xffffff80226705a1
0xffffff8144263b70 : 0xffffff80226706b0
0xffffff8144263b90 : 0xffffff80226711a0
0xffffff8144263bd0 : 0xffffff8022695c5b
0xffffff8144263c00 : 0xffffff802268f39d
0xffffff8144263c30 : 0xffffff802268e5ec
0xffffff8144263c70 : 0xffffff802267e58c
0xffffff8144263d80 : 0xffffff80226825cf
0xffffff8144263db0 : 0xffffff802263d9e3
0xffffff8144263df0 : 0xffffff80229cec5e
0xffffff8144263e60 : 0xffffff80229e25ed
0xffffff8144263ef0 : 0xffffff80229e2967
0xffffff8144263f30 : 0xffffff8022620b3b
0xffffff8144263f60 : 0xffffff80226dc883
0xffffff8144263f80 : 0xffffff80226f3712
BSD process name corresponding to current thread: xpcd
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x0000000022400000
Kernel text base: 0xffffff8022600000
System model name: MacBookPro9,2 (Mac-6F01561E16C75D06)
System uptime in nanoseconds: 85519367877618
last loaded kext at 85449604909270: com.apple.driver.AppleIntelMCEReporter      104 (addr 0xffffff7fa44d8000, size 49152)
last unloaded kext at 83626591194872: com.apple.driver.AppleIntelMCEReporter    104 (addr 0xffffff7fa44d8000, size 32768)
loaded kexts:
com.apple.driver.AppleIntelMCEReporter 104
com.apple.driver.AudioAUUC      1.60
com.apple.filesystems.autofs    3.0
com.apple.iokit.IOBluetoothSerialManager        4.2.6f1
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AGPM   100.14.28
com.apple.driver.X86PlatformShim        1.0.0
com.apple.driver.AppleHDA       2.6.3f4
com.apple.driver.AppleUpstreamUserClient        3.5.13
com.apple.driver.AppleMikeyDriver       2.6.3f4
com.apple.driver.AppleThunderboltIP     1.1.2
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleSMCPDRC   1.0.0
com.apple.driver.AppleSMCLMU    2.0.4d1
com.apple.driver.AppleLPC       1.7.0
com.apple.driver.AppleMCCSControl       1.2.5
com.apple.driver.AppleIntelHD4000Graphics       8.2.8
com.apple.driver.AppleIntelFramebufferCapri     8.2.8
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport     4.2.6f1
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X   7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.SMCMotionSensor        3.0.4d1
com.apple.driver.AppleUSBTCButtons      240.2
com.apple.driver.AppleIRController      325.7
com.apple.driver.AppleUSBTCKeyboard     240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless     1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache     35
com.apple.iokit.SCSITaskUserClient      3.6.6
com.apple.driver.XsanFilter     404
com.apple.iokit.IOAHCIBlockStorage      2.6.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.AirPort.Brcm4331       700.20.22
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleSDXC      1.5.2
com.apple.iokit.AppleBCM5701Ethernet    3.8.1b2
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleUSBEHCI   660.4.0
com.apple.driver.AppleUSBXHCI   683.4.0
com.apple.driver.AppleSmartBatteryManager       161.0.0
com.apple.driver.AppleACPIButtons       2.0
com.apple.driver.AppleRTC       2.0
com.apple.driver.AppleHPET      1.8
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC      1.7
com.apple.driver.AppleIntelCPUPowerManagementClient     217.92.1
com.apple.nke.applicationfirewall       153
com.apple.security.quarantine   3
com.apple.driver.AppleIntelCPUPowerManagement   217.92.1
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib     2.6.3f4
com.apple.vecLib.kext   1.0.0
com.apple.iokit.IOAudioFamily   1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleHDAController     2.6.3f4
com.apple.iokit.IOHDAFamily     2.6.3f4
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert   1.0.4
com.apple.driver.X86PlatformPlugin      1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleSMBusController   1.0.12d1
com.apple.iokit.IONDRVSupport   2.4.1
com.apple.iokit.IOAcceleratorFamily2    98.22
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.iokit.IOBluetoothHostControllerUSBTransport   4.2.6f1
com.apple.iokit.IOSurface       91.1
com.apple.iokit.IOGraphicsFamily        2.4.1
com.apple.iokit.IOBluetoothFamily       4.2.6f1
com.apple.driver.AppleSMC       3.1.8
com.apple.driver.AppleThunderboltDPInAdapter    3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily        3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch     240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub       650.4.0
com.apple.driver.AppleUSBComposite      656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.6.6
com.apple.iokit.IOBDStorageFamily       1.7
com.apple.iokit.IODVDStorageFamily      1.7.1
com.apple.iokit.IOCDStorageFamily       1.7.1
com.apple.iokit.IOAHCISerialATAPI       2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily   3.6.6
com.apple.driver.AppleThunderboltNHI    2.0.1
com.apple.iokit.IOThunderboltFamily     3.3.1
com.apple.iokit.IOFireWireFamily        4.5.5
com.apple.iokit.IO80211Family   640.36
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily      3.2
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOUSBFamily     683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime        2.0
com.apple.iokit.IOHIDFamily     2.0.0
com.apple.iokit.IOSMBusFamily   1.1
com.apple.security.sandbox      278.11.1
com.apple.kext.AppleMatch       1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages     371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore       28.30
com.apple.driver.AppleACPIPlatform      2.0
com.apple.iokit.IOPCIFamily     2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto        1.0
com.apple.kec.pthread   1
Model: MacBookPro9,2, BootROM MBP91.00D3.B09, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, SMC 2.2f44
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3431554638424455352D474E2D4620
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.6f1 14216, 3 services, 15 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Samsung SSD 840 EVO 120GB, 120.03 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: IR Receiver
Thunderbolt Bus: MacBook Pro, Apple Inc., 25.1
Any help or ideas what may have caused this? I can't boot into safe mode, and i cannot mount the drive to repair in disk utility. Is there a way to resolve this myself?

Time Capsule Not showing in Disk Utility

Similar Messages

Maybe you are looking for