Time Capsule not working as a router

I've done a search, but can't find anything that jumps out to me as the same issue.
I've recently ditched all my PC gear. Now have the following:
Mac Mini
2TB Time Capsule
MacBook Air
iPad
My issue is with the internet connectivity of the Time Capsule. I have the mac mini connected via Ethernet. It can get on the internet no problem. None of my wifi devices can at all. My ISP only allows two devices to ping out, and they need to be registered via MAC address. No big deal, except my Time Capsule isn't functioning like a router. So, the MAC address of my Mac Mini is registered, and it's working, but I can't register the Time Capsule. I'm pretty sure I'm missing something easy, but can't for the life of me figure out what it is. Figured instead of banging my head against the wall, I'd see if anyone had something similar happen to them?

Register by MAC address to the first device is generally used by cable companies. But the Modem acts as the first port of call and whatever device first is turned on, picks up the public IP address and the MAC is registered. It just works.
Your issue might be that the first device to register has a very long lease. Since you cannot power cycle you should ask the IT admin of the building who controls this setup to release and renew the IP after you plug in the TC otherwise it will not be recognised.. for days or weeks or however long the lease is set to.
But it could be 24hours.
Plainly you got the Mac Mini working.. how did you do that??
Sometimes you can just try overnight.. remove the Mac and plug in the TC.. but it is far easier to talk to the admin and get him/her to simply renew the lease.
The other method we use is spoof the MAC address of the device currently plugged in. ie grab the MAC address of the Mini and use it in the router.. to pretend it is really the Mini.. the router on the other end is none the wiser.
TC AFAIK, has no ability to spoof, but almost every other broadband router made can do it. Apple designed it for lowest common denominator in terms of networking ability.. to put it mildly.
Note your internet might be already behind a NAT.. if you use the TC or any other router in NAT mode there is an issue of double NAT with every site that requires interactive connection because there is no possible link from the site to your PC by forwarding the port. Double NAT effectively blocks it.
Check the IP you have on the Mini now.. if it is a private address.. ensure it is not 10.0.x.x by the way otherwise the TC will not work due to routing considerations. But any of the private IP address ranges are not routable over the internet and will give you issues.
http://en.wikipedia.org/wiki/Private_network

Similar Messages

Time capsule not working as wireless router

I am having trouble with my time capsule working as a wireless router. It appears in airport utility and the green light is on. It is backing up my computer which is hardwired with via ethernet. The network setting is on bridge. Any thoughts?

Your first statement and last statement are in conflict.
I am having trouble with my time capsule working as a wireless router.
The network setting is on bridge.
If the TC is set to bridge it cannot work as a router. To be a router the TC must be set to dhcp + nat.
If you already have a router, then the TC should be in bridge. That is correct. If the modem is pure modem then the TC is in the wrong mode to work.
You should have the wireless set to create a wireless network..
Use all short names, no spaces and pure alphanumeric. Set a different name for 2.4ghz and 5ghz until you sort the problem.. if it is just connection to wireless issue.
Please clarify what is the problem.

Time capsule not working over ethernet cable

my time capsule is connected to a router (also transmitting a wireless network) using ethernet cable. I can connect to the time capsule using both mac and windows over wireless, and I have internet. However, there's no internet when using ethernet cable (I see the time capsule in my airport utility, and I have it on bridge mode. Still, no internet.)

How old is the TC? What model, A1xxx from the box or rubber mat?
Failure of the ethernet ports does happen on the Gen3 but it is pretty odd.
I would test with another ethernet cable.. check the connectivity leds go on when you plug the cable in. If not, it cannot work.. get another cable or try another port or device.
Make sure the ethernet is set to auto in the computer.
Tell me what IP gateway and dns address it is getting. We can work forward from there.

Time capsule not working as wireless base station suddenly

I have been using my time capsule as base station for wireless network in our house for some time and suddenly network is not working for all wireless devices in the house. Desktop imac is connected to internet via ethernet cable through time capsule and works fine so I know problem is not with cable modem or signal coming to house. Laptops appear to be connected to my network fine but when attempting to connect any site through safari or firefox I just get the spinning wheel thingy.

Check that the laptops are getting DNS and router (gateway) from the TC.. if not reset it and do the setup again.
What OS are you actually running on the laptops.. this problem started with Lion and is much worse in ML.. it is actually not a Snow Leopard issue which you list as the OS.

Will my Time Capsule also work as a router or do I still need a router

will my time capsule alos work as a wireless router or do I need to connect it via my wireless router? Duke of Ashtead

See answer to your other same question.
Please do not double post questions on the forum.
Thanks!

Time Capsule Not Working With Time Machine

I'm trying to backup to my Time Capsule, which I haven't used in over two years. It had been displaced because of a change in internet service providers. The new provider came in with a Linksys router, setup a sub-network, and left the Time Capsule/Airport out of the mix.
So I want to return to using my Time Capsule and have since pulled out the Linksys router, and got the Airport functionality working with the existing, primary network. In other words, the Time Capsule/Airport is working to extend the range of the network.
Problem is this: I cannot backup to the Time Capsule. Even if I'm connecting to the Time Capsule via ethernet, I cannot get it past the 'preparing' phase when running Time Machine. It stays at the phase for what seems to me an inordinate amount of time (30-45 minutes). If I go into System Preferences, the Time Capsule disk doesn't make itself available when using it with Time Machine. If I choose to go into the Star Wars display of Time Machine, I can sort of see the various backups, but I can't roll back to them, and the backup indicator on the right looks sort of ghosted, like it's there but it's not there.
How do I know if the disk within the Time Capsule is failing? Could that be what's going on? How would I test it? I get a green light on the front of the TC, but not everything is hunky dory since I'm not able to backup.
Is part of my problem that I'm using a not up-to-date version of Airport Utility? –I'm using 5.4.2

Oh and here it is, on this page, Section D, #1:
"Section D. OTHER PROBLEMS RUNNING BACKUPS
D1. Stuck in "Calculating changes" or "Preparing""
and then the Apple supporting doc, as well:
http://support.apple.com/kb/TS1516
Fabulous. Thank you.

HT1175 3TB time capsule not working with new iMac

I have a 3TB time capsule that's c. 2 years old. It worked perfectly with my old iMac. I bought a new 27" one when it came out this year and since the time capsule will not work.
I had to clear all the data as a starter. Now it gets a little into the backup taking c. 1 day then resets. It's connected via ethernet cable and has been told to join an existing network.
Currently it says it's backing up 922,498 items, after 2 hours (this is the third attempt, it resets then has no record of the old backup) it says 10kb of 789.44 GB - About 4,664,440 days remaining!!
To clarify I'm trying to use Time Machine with the Time Capsule.
Please help!!

You have made a mistake in the setup.
You do not "Join an existing networking" and use ethernet.. they are mutually exclusive.
What you are doing is backing up over double hop wireless which is slowing to a crawl.
You need to put the TC into bridge mode.. and plug it into the main router by ethernet. Then use wiretess to the TC if you are too far away or ethernet if you are close by..
As soon as you put the TC into join a wireless network it deactivates the ethernet.

Time capsule not working properly after moving to a new house

Hello,
I have a macbook pro and a refurbished time capsule 2tb. I purchased both in 2013 and the time capsule at that time was used as both a wireless router for our house and my back up.I recently moved and didn't have access to the time capsule for over a month. Once I settled into the new house I plugged the power cable and internet connection into the time capsule and assumed that automatically it would keep working. It appears that it is backing up my system as I can pull up the application and see appropriate in-time documents however it consistently has a slow orange light blinking. I am not currently using it as a router as we have xfinity and have a different router for the house and when I try to use the time machine instead it cannot connect.
My internet connection is fine and I would like to leave it as is. It also appears the back up function is working for my mac. The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine? It it because the ethernet cable is attached and can the time capsule work without this?
I have tried resetting the capsule with the 10seconds hold on the reset button etc as seen on other posts but the orange light remains.
Thoughts?
Thank you for your time and assistance,
ahahn063

The question is, does the orange blinking light matter and or is it indicating that I am improperly using the machine?
The amber light is like the "Check Engine" light in your car. It blinks for a reason......the Time Capsule has a message for you.
That message might be that there is a firmware update available for the Time Capsule that needs to be installed....or....that AirPort Utility has detected that the Time Capsule is not configured correctly to work with the Xfinity router that you are now using.
To see the message.....open Finder > Applications > Utilities > AirPort Utility
Click on the amber dot
Then look for a Status setting, and click on the small amber dot there
A message will appear to tell you why the Time Capsule is whining, along with a suggested action to fix the issue.
If you are still having difficult, we for you to post back with the exact message that you see.

Time Capsule not working!

I have an iMac about 3 years old. I have a time capsule about the same. I have Mountain Lion. The Time Capsule keeps wanting to back up 33.44 GB of something. Is says the oldest backup was in April 26, 2012. What do I need to do to get it working?
Thank you
Carl

Mountain Lion seems to generate ghost disks.. I am not sure why but they might or might not delete.
I guess my method would be to start over.. use a better name..
Short no spaces pure alphanumeric. Not "Carl's Time Capsule"
You can put CarlTC
After you make the change reboot everything.. modem router TC client computers. To make sure you have fresh new view of the network.. then delete all the old names.
Redirect TM to the new name.. but the change will not affect the backup which is stored and TM should be able to pick it up and continue.

Time Capsule Not Working With Azureus!

Hi everyone.
I have read every post about this and I am sure I've done everything right, but I STILL cannot pass the NAT/Firewall test on Azureus. I even got an Apple rep to look into it and he worked on it for a week and even he doesn't understand why it isn't working!!! I am running Leopard 10.5.2, and I have a 500 GB Time Capsule. I am using the latest version of Airport Utility and the latest version of Azureus. My ISP is Verizon Fios. Please note that when I was using Airport Extreme with a Powerbook G4 OS 10.4, everything was working swimmingly. The ONLY thing that's changed is that now I'm on Leopard and a Time Capsule. So, Here's a summary of what I've done :
1. In Network Prefs, made sure I am using a manually configured static IP address (10.0.1.201.)
2. In Security prefs, made sure firewall is off.
3. In Airport Utility, made sure I am sharing single IP address using NAT and DHCP.
4. In Port Mapping, checked the NAT enable box and opened these ports: 6881-6889, 49125-65535, and 40156 just for kicks. I've entered these numbers both public and private, both UDP and TCP (filling in all 4 fields, in other words) AND made sure the IP address matched the static one I was using in Network Prefs.
5. Restarted Azureus and my Time Capsule (and even the whole computer, just for good measure).
And guess what? Each and EVERY time, I go back to Azureus, run the NAT/Firewall test using a port I just opened, and am told it failed and that the port is in fact closed. I get the "timed out" error.
***?????? I have been working on this for weeks, literally, and I am totally losing it! Will I never see a green smiley again? Please help!!!!
Thank you in advance for ANY tips you may have...

Here are the settings that work for me.
1. Azureus>Options>Connections>Incoming TCP/UDP listen port:  49125
2. Applications>Utilities>Airport Utility>Time Capsule>Internet>NAT> Enable NAT Port Mapping Protocol
3. Applications>Utilities>Airport Utility>Time Capsule>Advanced>Port mapping>
     Public UDP portal: 49125
     Public TCP portal: 49125
    Private IP address: 10.0.1.201
    Private UDP portal: 49125
    Private TCP portal: 49125
4. System Preferences>Network>Advanced>TCP/IP>Configure IPv4: *Using DHCP with Manual Address* (this is choice #2 not #4: Manual)
5. IPv4 address:  10.0.1.201
I think that's all. I fooled around with this for a long time and not everything I did may be necessary but I don't want to mess with success.  Don't know why port 49125 works, but it worked on my Dell computer and Linksys router also. Apple Support was positive I didn't need steps 4 and 5 but 60 seconds later, my smiley faces turned green, and when I tested the port, Azureus message said "+Congratulations, you fixed it."+
The only difference I see, between your settings and mine, is perhaps steps #1 and #4. Hope you get it working. Nothing more frustrating than " little yellow faces".

Time Capsule not working - need help

Hi guys,
I just bought a Time Capsule to replace my Linksys E2000. The E2000 was running fine but I wanted a wireless external HD, which the Time Capsule provided.
So I've set the Time Capsule up with all the same settings for my ISP, which are as follows:
IP address: 121.73.247.68
subnet 255.0.0.0
gateway 121.73.247.1
dns 203.97.78.43
203.97.78.44
After doing all the setup and plugging the ISP internet cable into the WAN port, the Time Capsule light went green.
The problem is I have no internet connection!
I can ping the router (10.0.1.1) but that's it. No DNS server response and no web access. I've fiddled around with the settings for ages and have run out of ideas.
I'm kind of annoyed with Apple - this has definitely not 'just worked'.
As soon as I plug back in my E2000, everything works fine. So I'm pretty sure it's not a problem with my ISP or the cable modem.
Anyone have any ideas?

I found another post on this site (can't locate it now though), but someone else had the same problem and I did something similar to him and I finally got my TC and modem to work together. I unplugged the power and cable from the modem for about 20 minutes total. During this time the TC was still powered and plugged in to the modem. Then before I powered the modem, I unplugged the power for the TC for about 5 minutes, plugged power to TC back, then connected cable on modem followed by power to modem. It miracously worked after that, I didn't even have to change any settings through AirPort for the TC.
I have NO clue why this particular sequence of events worked, but I know I did all of those steps (maybe not in that particular order) and had been unsuccessful.
The post I read earlier used the following steps - Keep the TC connected to the modem the entire time, unplug power for the TC for 5 minutes, then plug power to TC back. Unplug power & cable from modem (can't remember if he left it unplugged for a specific time), then connect cable & power for modem.
The only reason I left my modem disconnected for 20 minutes was because I had read it takes varying amounts of time for the modem to reset. I don't have a reset button on my modem so that wasn't an option for me and calling the ISP to reset my modem didn't work either - I did that twice on Saturday with no success, but I don't remember if I had the TC still connected? I tried so many different things over the last 48 hours, but all I know is the steps above worked for me.
Hope it helps you as well.

Time capsule not working with ppoe after latest airport update

I've just updated installed the latest airport update from apple and now my time capsule will not connect to the intenet vie PPoE via a BT Infinity FTTP modem. The only thing that has changed is the software update. Any ideas?

Tivo and Roku may really need upnp which is not provided by the apple router.
But to test this properly are you double NATting.. if you have an existing modem router did you bridge it before connecting the TC.
Tell us exactly what broadband you have, and what make and model is your modem?? Is it working as router??
If the TC is also working as router it should be fixed to work as bridge mode.
More info and we can get you going.

Time Capsule not working with new modem

I have been using my TC with our motorola modem for 2.5 years. On Friday last week, the modem crapped the bed and AT&T sent us a new modem, a netgear. The modem is working fine; when I connect the ethernet cable directly to my laptop the internet work perfectly, however when I try to get the wireless network going through my TC, there is no connection. All the lights on the modem work fine and every time I try to work with the TC, it says that it is working fine as well. It seems like something is not communicating between the modem and the TC.
I've tried restarting both machines numerous times, I've checked and rechecked the WEP password, the IP addresses are fine, and I'm still lost
The modem works. Time Capsule Works. I don't get it!

The new netgear is probably a modem router whereas the old Motorola was pure modem.. not sure but possible.
Reset the TC and set it to bridge modem.. plug into the netgear modem router.. and it should work fine.
If the new netgear is in fact a pure modem.. you need to turn it off and put the TC in place.. wait up to 15min for the ISP to renew the lease on the MAC address then turn on the cable modem.. wait then turn on the TC. But this is not necessary if it is a router.
What is the model number of the netgear so I can check this.. ?

Time Capsule not working anymore as extender

Hello all,
I have had a working wifi network for the past several years utilizing an airport extreme as my base station with my TIme Capsule in the bedroom functioning as my extender. With my old Time Warner Cable modem, everything was working great until TWC made me get a new high speed modem. After I got the new modem from them, the wifi was definitely faster in the living room in front of the Airport Extreme, but I had practically no service in the bedroom even though airport utility said the connection for the time capsule was excellent. I got rid of the TWC modem and purchased a Surfboard SB 6141, and I have the same exact problem. Can anyone tell me why this is not working properly? Is this a common issue? Is there anyway I can see if this is a problem that can be fixed? If I unplug the TC in the bedroom, my download speeds are much better, but not as fast as in the living room bears the AE.

When you change the modem or main router you need to reboot the whole network.
The particular model you got.. Motorola 6141 happens to be troublesome indeed with the apple routers.
I recommend you simply factory reset both the AE and TC.. you can do both of them the same way.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
I would then take both back to 7.6.1 firmware.
Hold down the option key whilst you select version of firmware in the utility.
Using airport utility reset the names of everything.. use all short names, no spaces and pure alphanumeric.
Use for example name like AEgen4 and TCgenx (fill in the actual gen for x)
Use short wireless names AE24ghz and a different name for 5ghz so you can force the extend to correct band.
eg AE5ghz
Also try locking the wireless channels.. test on 11, 8, 6 on 2.4ghz and try 36 and 149 on 5ghz.
I also strongly recommend using the v5 airport utility.. it will show you the actual link speeds between the AE and TC. v6 airport utility is a toy version with pretty pictures and no content.
You can see from my set in the centre of the main AP and the extend wireless units on each side.. all of these can be opened at the same time and you can keep track of the links.

Time capsule not working with sb6141

Hi! I just installed a new modem, the Motorola SB6141. Since I installed it I have been having problems, whereas everything with my Time Capsule and all my devices (MacBook, MacBook Air, iPhone, iPad mini) was hunky dory and in total function before installing the new modem. I called Time Warner customer service, and they were able to help me via 'renew DHCP lease' while my boyfriend's MacBook was hooked up via ethernet cord. Now that computer is the only one that will accept the wifi through the Time Capsule (I plugged the ethernet cable into the router and left the MacBook only on WiFi). My MacBook air, despite my attempts to 'renew DHCP lease' is still not working. It says it is connected to the Wi-Fi network with the IP address 10.0.1.3. I already tried forgetting the network and re-joining it, restarting everything, etc etc to no avail.
Help!!!!!!!!

The airport routers do have issues with SB6141 modems.. there is well known issues with lots of posts.. just do a search here for sb6141 or 6121 and you will be amazed.
The Gen4 should work better than gen5 which has the most issues.. but Apple increased the problems with 7.6.4 firmware.
Downgrade firmware to 7.6.1
You do that by holding the option key when you click version.
Factory reset when you are finished and setup the TC again.. it must be in router mode.. if you fail to get the public IP on the TC wan interface power down the modem for 20min then power it up.. wait 2min and then power cycle the TC and it should pick up the public IP.
No luck replace the modem or the TC.

Time Capsule not working as a router

Similar Messages

Maybe you are looking for