Time Capsule (old one) operating frequency

I am sure I set Time Capsule operating frequency to the higher optional waveband.
How can I adjust Time Capsule to a lower frequency on its wi-fi arrangement?

Welcome to the discussion area!
Open Hard Drive > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Wireless tab below the icons to get to the Wireless setup page
Select the Radio Mode selection box. You may need to hold down the "option" key on your computer while you click on the selection box to display all available choices.
Click Update to save your changes and the TC will restart in 15-20 seconds

Similar Messages

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Can I use two Time Capsules? one as an extension of my laptop (for music and video storage) and the other one to back up everything from the laptop and Time Capsule (for music and videos)

Not via Time Machine. It cannot back up from a network location.
The 3rd-party apps CarbonCopyCloner and ChronoSync may be workable alternatives.
EDIT: And, if you're going to do that, you could back up from the Time Capsule to a USB drive connected to the TC's USB port. Second TC not required.
Message was edited by: Pondini

Problems accessing time capsule data "The operation can't be completed because the original [...]"

So as my title would suggest, I'm having time capsule issues.
First of all, I'm running a MBPret late 2013. Currently I'm trying to setup my time capsule in my university dorm room for two reasons:
1) I want to use the internet they provide us.
2) I want to use time capsule as a backup drive.
I am not permitted to use wifi as per my contract with the university, unfortunate, but fine, I can use ethernet, I have the ethernet -> thunderbolt adapter.
Now, thus far, I've setup my time capsule normally (this is second setup not the first) and I performed a hard reset before connecting it all here. Before here it was setup at my previous house. After that I disabled the wireless and enabled secure shared disks "with device password".
I don't have internet access yet, though I believe this is a problem on the administrator side not mine, but the real problem is that I cannot access the data folder on my time capsule in finder. I've tried erasing the volume, hard resetting and setting up again, I keep getting the same error message:
"The operation can’t be completed because the original item for "Data" can't be found"
Any suggestions?
Regards

If you don't have applecare you will need to pay if you want the genuine article but your problem is familiar and Apple support is likely to say your the first person they have ever heard of with this problem.. even when every second post here refers to it.
Here is my standard list. Work through it and tell me if you succeed.
The cause is Yosemite btw.
A factory reset of the TC is the start.. it is required so you can find it again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

New Mac, Old Mac, Time Capsule, Old Airport express

Hi,
I have a couple of questions which I should be grateful if someone could answer:
I currently have an "old" mac (latest version of 10.4) and an "old" airport express (latest updates) connected to a modem which forms a basic wireless network with my mac connecting @ 802.11g speed. I also use airtunes.
I am looking at getting a new mac and a time capsule. My intention is to set up a new network with the time capsule as the main base connected to the modem. I only intend to use the backup facility with the new mac.
1.) Can I add the "old" airport express as a client to this network?
2.) If the answer is yes, then clearly the network will have to allow "g" and "n" devices to connect. will doing so mean that the new mac cannot take advantage of the greater speed available with the "n" standard? That is to say will the new mac only ever connect at the g speed?
Also is there the option to "zero" the time capsule hard drive?
Thanks

1.) Can I add the "old" airport express as a client to this network?
Certainly as long as the new Time Capsule is operating in an 802.11g compatible mode. The AirPort Express (AX) will connect wirelessly just like any other client.
2.) If the answer is yes, then clearly the network will have to allow "g" and "n" devices to connect. will doing so mean that the new mac cannot take advantage of the greater speed available with the "n" standard? That is to say will the new mac only ever connect at the g speed?
The 802.11n connection with the new Mac will take a speed hit whenever the old AX or old Mac are connected via 802.11g. The amount of the hit will depend on the amount of 802.11g activity.

Two Time Capsules, now one is not visible.

Our network has two Time Capsules, the model TimeCapsule6,109.
TC #1 is the network's router. Its WAN port talks to the cable modem. One of its LAN ports connects to TC #2's WAN port. TC #2 is in Bridge mode. Both TCs are configured to "Create A Wireless Network" and both wireless networks have the same name etc etc. WiFi works well throughout the house.
TC #1 is backing up a couple of the computers, TC #2 is backing up the others. This has all been working for a couple of months.
Three machines were updated to Mavericks. I updated the fourth last night; it was on Lion (not even ML, just lazy). Before upgrading the other machines I manually started a Time Machine backup. I noticed that this machine hadn't been backed up in a day. When I manually started it, it could not find the backup disk, which was on TC #1. TC #1 didn't even show up in the Finder. That was odd, but I installed Mavericks anyway.
Tonight I started to investigate. I'm on my main machine, an iMac running Mavericks, and I notice that TC #2's icon in the Finder under shared looks like the Time Capsule, but TC #1's icon is an old computer monitor. I can click on the icon for both and connect and see the disks.
I open up Airport Utility. TC #2 is visible, TC #1 is not. I open up the iNet utility and scan the network. Both Time Capsules show up, but only TC #2 identifies as a Time Capsule. TC #1 does show that it's the gateway.
iNet has an "Airport Monitor" option. I select it; only TC #2 shows up.
What's odd is that the network still functions; TC #1 is the router/WAN interface, and all of that still works. I can get to the network from outside with Back To My Mac and I can see my Subversion repository (via http) and all of that. It's just that TC #1 doesn't appear to be a Time Capsule in terms of its visibility to Airport Utility and to Time Machine.
Ideas?

Maverick has changed a number of things.. which can mess things up.
Firstly reboot the network.. so everything off.. restart the modem.. wait 2min.. restart the TC#1.. wait 2min, restart TC#2.. wait 2min.. then restart the clients.
Do the TC disk show up?
Any continuing issue manually mount the TC disk.. in finder use Go, Connect to Server and type the address,
AFP://TCname
That will then hopefully get past this problem.

Can I (or How can I) chain two Time Capsules on one network for two Macs?

Currently we have one dual-band TC connected to our cable modem. Mac 1 backs up to it. I also have an original TC (one-band) that I would set to 5GHz dedicated for Mac 2.
Would this plan work and provide Backup and Internet to both machines?
Cable Modem --->TC1--->TC2
Mac 1 would connect to TC1 for Time Machine function and Internet Access.
Mac 2 would connect to TC2 for Time Machine function and Internet Access.
(---> = Ethernet cable)

No changes needed on TC1, but you may need to use AirPort Utility - Manual Setup to note a few of the settings on TC1, such as the exact type of security that it is using now since that information will be used to configure TC2.
Connect an ethernet cable from one of the LAN <-> ports on TC1 to the WAN port (circle icon) on TC2*. Open AirPort Utility - Manual Setup and TC2 should appear. If not, you'll need to "hard reset" TC2 by holding in the reset button until the amber light begins to blink more quickly, hold another few seconds when you see this and then release
Click the Time Capsule tab below the icons to name your device, assign a device password and set Time Zone settings
Click the Wireless tab
Wireless Mode = Create a wireless network
Wireless Network Name = Same name as TC1 network**
No check mark needed next to Allow this network to be extended unless you plan to add more wireless device to extend the network
Radio Mode = 802.11n only 5 GHz
Channel = Automatic
Wireless Security = Same setting as TC1
Wireless Password = Same password as TC1
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save settings and let TC2 restart. Then power down the entire network. Power up the modem first, then TC1, then TC2, then each device one at a time. Allow a moment or two for each device to fully power up before you start the next.
*When the TC is in Bridge Mode, it really makes no difference which port you use to connect, as they all behave the same. I use the WAN port as a habit for connections like this so that I know at a glance where the connection is coming from. But, you could connect to one of the LAN ports on TC2 if you prefer.
**Assign a different name than TC1 if you want to log on separately to the network that TC2 provides
Be sure to setup Mac2 to backup to TC2 for Time Machine and you should be all set.

Can't print through Time Capsule using Windows-operating computers

I've just bought a time capsule 500GB and it's working fine. It backups my macbook every hour and I can easily print whatever file I want through my Canon iP1800 series, which is connect to WAN port of my time capsule.
However, I have others 2 notebooks running windows, and I can't print from them wirelessly. I've installed the airport utility and Bonjour in both computers using the CD that came with my time capsule and I followed these instructions of an old topic here (_but it didn't work out_):
“1. Make sure the printer is recognized by the base station.
2. Select 'Add a new printer' in Windows
3. Select 'Local Printer' in the dialog box (auto detect and install
should be off), click next.
4. Choose 'Create a new port' and "Standard TCP/IP Port'. Click next.
5. For the printer IP address, enter the address of the base station 10.0.1.1. The port name will be filled automatically. Click next.
6. For the device type, choose 'Hewlet Packard Jet Direct', then click Finish.
Choose your printer from the list and follow the rest of the prompts to install and configure the driver.”
Do someone have any idea to tell me what's happening? How can I fix this problem and have Mac and Windows laptops printing through my time capsule?
Thanks

When you installed bonjour did the Bonjour Print Wizard appear on your desktop? Or in the program menu?
http://support.apple.com/kb/HT3052?viewlocale=en_US
In my personal experience Bonjour sometimes doesn't install properly and doesn't appear on either the desktop or program menu, particularly if it is installed at the same time as another piece of apple software. Each of the times this happened I removed bonjour, using Windows Setup:Add/Remove programs, and then downloaded it again individually.
If you have the same experience as me you'll then be asked if you want to install a shortcut to the printer wizard. The wizard has done the trick for me. I've not yet had to resort to the rather more complicated "add new printer" route.
Message was edited by: puzzlebobble

Connecting two time capsules on one router

I have 2 TCs, TC1 will be used upstairs, TC2 downstairs. Both connected by cable to Netgear router. TCs will have different names. Can I set up each independently, do I need to bridge one? Any problems with possible interference? The single strength from TC1 can be seen downstairs but starts to fade quickly as my wife moves her laptop around house.

1). Would my solution be to follow the Airport Utility set up instructions to 'add to network' the new device?
When you first power up the new device and open AirPort Utility, choose the new device and select the "join" option, then you will be given an option to "extend" the wireless network in a later step during the configuration.
2). Could I then run my iTunes library from either the new Extreme's external HD, or the new TC's connected external HD?
Yes, you could move the iTunes library to the new drive and then "point" the iTunes application to the new location. I assume that you already have a backup of the library, correct?
If you are planning to use Time Machine to backup your Macs, keep in mind that Time Machine backups to a drive attached to the USB port on the AirPort Extreme are not supported, so the Time Capsule would be the recommended device if you plan to use Time Machine.
Also keep in mind that if you move the iTunes library to the Time Capsule, Time Machine will not be able to backup the library since it is already on the Time Capsule.

Time Capsule blocking one web site.

My Time Capsule is plugged into several PC's and several MAC's. I can't get to my work email web site only with anything that is attached or connected wirelesly to the Time Capsule. If I hardwire a computer directly to my cable modem I can access the site. I've had the Time Capsule for about a month and a half now and it just started blocking this site about three days ago. Any suggestions?

Having this same issue. All sites work fine except for one: http://bugzilla.mozilla.org . I've restored the Time Capsule to default settings, use DHCP to auto config the TC from the modem, same problem. If I plug directly from mac into cable modem, the site works.
The IP resolves fine. I can traceroute to the IP, can ping it, but when I try telnet'ing to the IP on port 80, connection times out. No TC, it works fine. Grrr... really frustrating.

Two time capsules for one Mac

I have 3 TB data on my Mac. The biggest Time Capsule is 2 TB.
At the moment I do only backups from one of my hard disks with 1 TB. I manage the additional backup of 2TB with Chronosync, but I really would like to do it with Time Machine.
Is there any possibility to add a second (or a third) Time Capsule to backup the rest (additional 2 TB) also with Time Machine?
Thanks for any help!

You could buy the smallest time capsule and connect a huge USB hard drive and select the USB drive as your back up location. Of course you could just add the huge hard drive to a USB port on your mac and do it that way (cheaper).
If you go ahead and use the Time Capsule for Time Machine backups don't do the first backup wirelessly it will take forever with that amount of data.

Two Time Capsules on one LAN = big problem!

I am having a problem with a Time Capsule and a Airport (with a USB disk attached) that are both on the same LAN. We are in a shared office environment on a shared LAN for access to the internet. I have an Airport with a shared disk attached via USB. Another firm on the same LAN has just installed a Time Capsule. When I tried to connect to MY shared disk I get a dialogue window asking for the password to the other firms Time Capsule! It's as though my Mac thinks MY shared disk is connected to their Time Capsule. After checking for any software updates restarting the Airport, disconnecting the USB drive etc several times the problem suddenly resolved on my end. I then tried to connect to the other firms Time Capsule disk from one of their Mac's and now it tries to connect to THEIR Time Capsule disk on MY Airport!!
Anyone have any ideas?
Thanks in advance.
Wiz
Message was edited by: Wizard of Oz
Message was edited by: Wizard of Oz

1). Would my solution be to follow the Airport Utility set up instructions to 'add to network' the new device?
When you first power up the new device and open AirPort Utility, choose the new device and select the "join" option, then you will be given an option to "extend" the wireless network in a later step during the configuration.
2). Could I then run my iTunes library from either the new Extreme's external HD, or the new TC's connected external HD?
Yes, you could move the iTunes library to the new drive and then "point" the iTunes application to the new location. I assume that you already have a backup of the library, correct?
If you are planning to use Time Machine to backup your Macs, keep in mind that Time Machine backups to a drive attached to the USB port on the AirPort Extreme are not supported, so the Time Capsule would be the recommended device if you plan to use Time Machine.
Also keep in mind that if you move the iTunes library to the Time Capsule, Time Machine will not be able to backup the library since it is already on the Time Capsule.

Time Capsule preventing one website from loading???

I maintain my high school's alumni website. I had no problems accessing it I prior to purchasing my Time Capsule. I was using a Linksys router prior to this. After adding the TC, I cannot access the website. If I unplug the TC and connect my cable modem directly to my iMac, I can access the site, but as soon as I put the TC back in, it won't display the site. I have the problem with both my MacBook (connecting wirelessly) and iMac (wired). But if I take the MacBook to Starbucks, I can connect to the site with no problem. So I have to believe it's a setting in the TC. When I connect to my company's VPN, I can hit the site (since it uses corporate DNS and such). Any ideas. I've looked at the various settings in the TC a hundred times, but nothing seems wrong. Also, I have not had a single other website give me any access problems. Simply one site, so far. But it's been this way for over a week now.

Just did another test by reverting back to my Linksys router (i.e. took out the Time Capsule from the picture entirely). I can reach the site with no problem from all my computers. As soon as I resume use of the TC, the sites cannot be reached again. I also downgraded the TC firmware to 7.4.1 but this did not solve the problem either. So I returned it 7.4.2. Ugh. I guess I'll just live with it and do the website maintenance from my work computer thru VPN.

Time Capsule Gigabit Ports operating at 100 Mbps (no 1000 Mbps speed)

Hello!
I'm a Verizon Fios user and recently upgraded to Quantum (150 Mbps up/65 down).
My network:
Verizon modem/router with gigabit Ethernet wired to WAN port on TC (3rd Gen).
Multiple AEX extending the network throughout the house
VZ router is the DHCP controller, TC set to bridge mode
For some reason, the port controller on the VZ router is only working at 100 Mbps for whatever port is connected to the TC. I'm certain my TC has gigabit ports (as advertised--they all do, right?) and therefore can't figure out why I can't get the two pieces to operate at gigabit speed (for reference, the VZ modem has indicator lights for 10/100/1000 speeds and the same information is displayed in the router settings).
The VZ configuration page allows me to manually select port speeds (10 half/full duplex, 100 half/full, 1000 full) or allow it to AUTO select. On auto, the port reports 100 Mbps full duplex with the TC. I tried manually selecting 1000 full duplex, at which point the port goes dark (for lack of a better term--no lights, no activity between the two).
I'm certain the gigabit functionality exists on the VZ router side: if I plug in my early 2011 MB Pro directly to the port, I get gigabit speeds. I've also tried wiring from VZ router to TC LAN port, with the same result.
Definitely frustrating: my wired connections are artificially reducing throughput for wireless! Any suggestions would be greatly appreciated: is there a setting I'm missing in Airport Utility?
Thanks!!
--Gus

I'm certain the gigabit functionality exists on the VZ router side: if I plug in my early 2011 MB Pro directly to the port, I get gigabit speeds. I've also tried wiring from VZ router to TC LAN port, with the same result.
Hi Gus
Let me just clarify the above statement.. wiring VZ to the TC LAN port got the same result as the WAN port.. that is how I am guessing you mean it. Not the same result as the MBP.. which worked fine.. !!
I do have an answer to slow ethernet speed but it is not a setting in the TC.. TC lacks most settings or control.. although I would do a factory reset just to be sure. You can also run it in double NAT for a test. The WAN port does have speed controls.. but you can only get to them from v5 utility..
That would be worthwhile to check.. I know you don't want double NAT but it is just to see what happens.
Otherwise your Gen3 A1355 is suffering capacitor deterioration on the 1.8v line.
I did fix it on one TC.. it is a rare problem. Normally the caps just die.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I fixed it by soldering a standard low ESR capacitor to the supply..
Test the TC cold, as the ethernet seemed to work ok until it heated up.
Good luck with that one.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Is it possible to set up Time Capsule on one network and then access its stored data (movies) using Back to My Mac from another network that also has Apple TV to play them?

I recently purchased a Time Capsule to store data at my office. I have an Apple TV at my home that I would like to start using to play my movies. With the storage of the new Time Capsule, I am curious if I can somehow store my iTunes movies on the Time Capsule at my office and then use Back to My Mac to access the TC from my home and then play them via Apple TV. Does this sound possible? We have an iMac at the office that remains on 24/7 connected to the TC.

ATV cannot play movies from the TC, even if it is on your home network.. ATV is a streamer.. it is not a media player.. and the TC is a dumb as a board hard disk in a router.. so it has nothing in it either.
You cannot play movies from ATV without itunes, which streams to the ATV.
If the iMac is running 24/7 then you should be able to connect to the iMac remotely and run from iTunes on that, which could then play movies stored on the TC.. with the following issues.. if you use wireless on the iMac forget it. The iMac has to be ethernet connected as it has to pick up the movie on the library and play it back to the TC to network to your home.
The next issues is speed of slowest connection.
Your download to your home maybe great.. what is the upload speed from your office like??
If you pay for uploads and downloads you will pay for the movie 3x.. first to download it.. second to upload it.. office to net.. and third to download it again.. net to home.. Sorry but it is better to play the movie directly from online itunes store.
If you plan to try and play non-itunes movies over the connection, it won't work.. ATV as stated is linked to itunes and cannot play movie files.
Overall this sounds like you need to think it out a bit more.

Two users using one Time Capsule from one MacBook

My wife and I both have separate accounts on my MacBook. I'm using the TimeCapsule as a network drive. When I log in to my MacBook account, I can access the Time Capsule. When my wife logs in later, she can see the Time Capsule in Finder, but is not allowed to access it. If I then switch back to my account and dismount the Time Capsule, my wife can access it.
If my wife logs into her account first, it's the other way around.
So I don't think there's anything basically wrong; we can both access the Time Capsule, as long as we're the first to log in to the MacBook.
I have enabled filesharing on the Time Capsule, with Time Capsule password (so not with accounts or disc password).
I would like to be able to access the Time Capsule, even when my wife is already logged in.
Is that possible?

Same problem here. From another thread (http://discussions.apple.com/thread.jspa?messageID=12839145&#12839145) I get the impression it cannot be done, but surely there's a workaround?..

Time Capsule (old one) operating frequency

Similar Messages

Maybe you are looking for