Time Capsule or Airport Express

I currently have my home network set up using an Airport Express connected to my modem/router and then our iMac, Vista laptop and iPod touches connect wirelessly through this. I've just got a Time Capsule to use solely for Time Machine back ups of the iMac. I wanted the TC as it can be put out of the way and back up without attracting attention to itself, so if we ever happen to be burgled it's less likely to get taken (a negative attitude I know, but in such an event it'd make things a little bit easier!!)
Reading the literature with the TC it says to set up using it as the main station on the network. My question is really based on this. I don't need the ports on the TC, so is there any advantage to doing this, swapping it with my Airport Express? Is it a more powerful transmitter? It'd be a lot easier just to add the TC to my current network, but I don't mind modifying it if it's going to give a useful advantage. If the TC is the same power as the AE then there won't be any real advantage I can see.
Cheers!

Unless you are flush with cash, and unless you want to stream music around the house, I'd keep hold of the TC for now.
Comparing specs of TC vs AX is useless, as the indicator of performance of the Wi-Fi is placement more than anything.
I've got both. I carry the AX in my bag for when I pop round to my mums / hotels etc. I use the TC at home for backup and main router (although it is plugged into a BT Home hub, so not effectively the main router)

Similar Messages

  • Do I need a cable connecting my Time Capsule to Airport Express if I want to use the AE to extend my wifi network range?

    I'm a bit confused by conflicting advice given by my local Apple shop and my internet provider. 
    My cable modem is plugged into a Time Capsule which I use to access the net wirelessly almost all over the house.  The one spot the wireless doesn't quite reach is (of course) where I now need my office and iMac to be.
    I thought I could just plug in an Airport Express somewhere in the middle  to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.  That's fiddly and would involve cables running under the floor or along walls and ceilings, not something I can or really want to do.  It's not really practical to try and move the cable connection point either.
    My internet provider suggested a netgear wireless extender and said that would only need to be plugged into power.  The reviews of the netgear product I found comparing it to Airport Express suggest that the Express doesn't need to be connected to anything other than power either to extend a network range (which was what I originally thought).
    So I'm wondering which advice is correct? I've also read that the netgear product isn't all that easy to set up so I'd rather stick with.   Apple if it will do what I want.
    Thanks for any help out there

    I thought I could just plug in an Airport Express somewhere in the middle  to extend the network's range but the guy at my local Apple shop said the Airport Express would need to be connected not just to power but to the Time Capsule, via a cable.
    I'm sure that the guy at the Apple shop means well, but he is not correct. 
    While it would be preferable to connect the Time Capsule and AirPort Express using a wired Ethernet connection, the Express can connect wirelessly and extend the wireless signal the same way....IF...it is located where it can receive a good wireless signal.

  • Apple TV Inference with Time Capsule and Airport express?

    I have recently bought an Apple TV 2, which seem to be working fine, however since installing it on my wireless network both my Time Capsule and Airport Express can't be found. Following some fault finding it seems that when I unplug the Apple TV I can reconfingure the TC and AE.
    The TC and AE are configured to join my existing network....and have happy sat there for a few years.
    I would really welcome any ideas.
    Thanks
    R

    Welcome to the discussions!
    It sounds like you have the basic configuration covered correctly.
    You might want to check some settings on the TC:
    Wireless Mode would be create a wireless network
    "Allow this network to be extended" should be checked
    The AX should be set to "extend a wireless network"
    The "allow wireless clients" box should be checked
    In this configuration, the ethernet port on the AX is active so things should work.
    A minor point...Although the TC is a dual band device, the AirPort Express is not. Can you make sure that that the Express is connecting to the "main" network on your TC? The "guest" network cannot be "extended".
    If you place your laptop close to the Express and hold down the option key while you click on the AirPort icon, some connection information will be displayed. The MAC address of the device that the laptop is connecting to will be indicated. Make sure that that this is the MAC address of the AX, and not the TC.
    Another note...If you have not changed the default "main" network, the radio mode is broadcasting 802.11n only at 5 GHz. These higher frequencies are absorbed by walls, ceilings and any obstructions much more quickly than 2.4 GHz signals. So, if you AX is some distance away, you may not be receiving a strong signal for the device at that location.
    If you have a signal strength utility on your laptop (the "bars" at the top of the screen are not a very good indicator of actual signal strength), turn off the AX and take a reading to see what kind of signal the Express is receiving where it is located.
    Please post back with your results.

  • Question about Time Capsule and Airport Express co-existence

    I have a new 3TB ME182LL/A Time Capsule attached to my wired home LAN, in bridge mode.  It works fine both as an access point on the upper floors of my home and as a Time Machine device. I also have an Airport Express, whose function in my network is solely to control my whole-house audio system from ITunes. I don't need, want, or use the wireless networking features of the Airport Express. I just have an audio cable running from it to my stereo, and an Ethernet patch cable connects it to my wired LAN.  The network mode in the Airport Express is set to "off".  Historically, the Airport Express has worked fine in this wired lan mode.  However, I unplugged it at some point while having some initial trouble deploying the new Time Capsule and only turned it back on today.  After turning it back on I observed something strange. My speedy wireless connection upstairs via the Time Capsule became slow. And when I launched Airport Utility, it drew a network diagram which showed my Time Capsule as a CLIENT of the Airport Express. In other words, the network diagram showed Internet at the top, then a vertical line down the the Airport Express, then the Time Capsule below that.  The correct / desired diagram would be the Time Capsule and Airport express as peers.  I connected to the Airport Express and verified that network mode was set to "off" but the incorrect network diagram persisted (as did poor wireless performance) until I unplugged the Airport Express.  After I did that, the Airport Utility drew the network correctly, although of course it showed a yellow caution sign next to the Airport Express, since it was down. And my wireless speed / reliability returned to normal. What is going on here?

    The automatic setup in the airport utility has changed something.
    Is the line down to the TC from the express dotted.. in other words is wireless??
    Funny stuff happens.
    Please post the screenshots of the 3 pages from the airport utility setup for both airport express and TC..
    Make sure wireless is set to off in the express.
    Both should be set to dhcp on the internet tab and both set to off bridge mode on the network tab.
    So for example the bridge on the network tab.
    The summary page can also be a help.
    There is a half summary page when you click the item in the airport utility.
    There is also a fully summary page, when you hold option key and double click the TC icon for example.

  • How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

    Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

  • Time Capsule to Airport Express extension

    I have recently set up a Time Capsule and Airport Express, the latter as an extension, without trouble. Needed further extension and purchased another AE. Although I get a green light on the second AE there is no extension of the WiFi to the area where the second AE is placed. I have re-set up all the components multiple times without success. Using Airport Utility 5.5.1 on a 27" late 2009 IMac, system 10.6.4. In advance thank you for any help.

    Ok, here is the basic steps to configure your base stations into a static WDS:
    (Note: To facilitate the WDS set up, temporarily connect the remote & relay base stations to the TC by Ethernet during the set up phase, and then, relocate them to the desired locations when complete. Also, jot down the AirPort IDs (wireless MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
    Main Base Station Setup - TC
    o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
    o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
    o Select the main base station, and then, choose Manual Setup from the Base
    Station menu.
    o Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
    o Click Wireless in the toolbar, and then, choose “Participate in a WDS network” from the Wireless Mode pop-up menu. Note: You will need to hold down the Option key in order to get this option on the AEBSn, 802.11n AirPort Express Base Station (AXn), or Time Capsule (TC).
    o Click WDS and then, choose “WDS main” from the WDS Mode pop-up menu.
    o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
    o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
    o Click Update to send the new settings to the base stations in the WDS.
    Remote Base Station Setup - AX#2
    o Open AirPort Utility; select the remote base station, and then, choose Manual Setup from the Base Station menu.
    o Enter the base station password, if necessary.
    o Enter the same network password as the main base station, if necessary.
    o Click AirPort in the toolbar, and then, click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
    o Click WDS and choose “WDS remote” from the pop-up menu.
    o Enter the AirPort ID of the main base station in the WDS Main field.
    o Click Update to transfer the settings to the base station.
    Relay Base Station Setup - AX#1
    o Open AirPort Utility; select the relay base station, and then, choose Manual Setup from the Base Station menu.
    o Enter the same network password as the main base station, if necessary.
    o Click AirPort in the toolbar, and then, click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and then, choose the same channel as the main base station from the Channel pop-up menu.
    o Click WDS and choose “WDS relay” from the WDS Mode pop-up menu.
    o Enter the AirPort ID of the main base station in the Main AirPort ID field.
    o Click the Add "+" button and enter the AirPort ID of the remote base station this relay base station will connect to.
    o Click Update to transfer the new WDS settings to the relay and remote base stations.
    (ref: Pages 42-46 of "Designing AirPort Networks.)

  • Will Time Capsule or Airport Express resolve my WiFi problem?

    Hi
    I have a regular 2.4 GHz WiFi router which i am using currently. The problem is there are too many WiFi users around me and it seems my WiFi keeps turning off due to interference. I have tried chaning channels but all in vain. Initially I thought it was a router issue but now I have turned off WiFi completely and using internet on ethernet cable and it has been working fine without any disconnection. So definitely it is the WiFi interference problem. I really want to use WiFi as i want the mobility. Do you think using a time capsule or Airport Express resolve this problem?

    It is troublesome. Use ethernet instead of wireless.
    Reset the whole network to factory and start again.
    Yosemite can see nothing that it does not setup itself it seems.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.

  • Extending a time capsule with airport express twice

    Hi,
    I have been trying to extend my existing wireless network recently but it never ended up how I wished...
    I have one 4th generation Time Capsule (A1409) and two Airport Express 802.11n (1st generation A1264).
    All currently have MAC Address base authentication and no security in place for was of testing (security not relevant at this point in time).
    When I extend my Time Capsule with either Airport Express this works like a charm, the LEDs are all green and connection works for client devices.
    When I extend my Time Capsule with both Airport Express the same applies, everything works.
    However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express. While all LEDs are green and the second Airport is seen in the Airport Utility, I find no client are ever able to connect to it and alway either connect to the first Airport Express or to the Time Capsule. This is an issue I the area I want to cover is pretty big and I need the second Airport Express for the additional reach.
    I haven't found anything against this setup, it however appears you can't connect to the second Airport. The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
    However no connection seam possible to Airport Express two.
    I have swapped Airport Express one and two, and in this case Airport Express gets the clients and Airport Express one now extending Airport Express two gets none.
    Is this an expected behavior, i.e. should I give up or is there anything I can do about this ?

    However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express.
    Apple's "extend a wireless network" feature will only allow you to extend the signal one level, not two. It's possible to have more than one device extending the signal, but each extender must connect directly to the main base station.....not to another device that is already extending the signal.
    The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
    This is an illusion. AirPort Express is "joining" the wireless network.....not extending it. When the Express "joins" a network, it can be used for AirPlay, or a remote printer could be connected to the USB port, but the Express will not provide any additional wireless signal coverage when it joins a network.
    Is this an expected behavior
    Yes. I can try to look up Apple's support document that explains this if you want more information, but you may likely already have all the information that you need. Let us know.

  • Extending g wireless from Time Capsule using Airport Express...

    Hi,
    My Time Machine is working well and I have two old Airport Express units that I'd like to use as wireless extenders.
    The Airport Expresses are the older type (i.e. only do 'g' wireless) and, according to the AirPort utility, they can't see the Time Capsule. My iPhone can connect OK so the 'g' network must be working.
    Am I doing something wrong? Can I use my Airport Expresses to do this?
    Thanks!

    Thanks for the info. Your iPhone is connecting to the Time Capsule, not either of the AirPort Express devices.
    In order to configure the AirPort Express devices to extend the wireless network, your Time Capsule Wireless Mode would need to be set to "Participate in a WDS network". You probably did not see this choice because it is "hidden". Hold down the "option" key on your computer while you click on the selection box to see if it appears.
    I'm not necessarily suggesting that you try the WDS setup. It's an older technology that places a heavy bandwidth penalty on your wireless network in return for greater wireless coverage. The first Airport Express that you configure will cut the bandwidth of your network in half. The second will cut the bandwidth in half again. In other words, you are down to 50% of the original bandwidth with the first Express and down to only 25% with the second.
    If you are getting acceptable wireless performance with the Time Capsule now, I would be tempted to leave well enough alone until you could add an AirPort Express "n" version, which would allow you to use the "extend a wireless network" setting. This is a much better performing arrangement and much easier to configure.
    The WDS configuration is quite complex and frankly difficult for many users. To get an idea of the process, read over pages 42-44 in the Designing AirPort Networks Guide.
    If you want to try this anyway, you will need reconfigure your Time Capsule and both Express devices to work in the WDS setup.

  • TIme capsule replaces Airport Express - method for success

    I just got a 1TB timecapsule to replace an airport-express as our home wireless internet router - as well as keeping data backed up.
    a couple of questions for those who may have successfully done this:
    what is the best process to swap out airport express function with Time Capsule?
    - (the apple manual assumes too many things go well and provides little detail on actual steps).
    - if both devices are on to copy info from AP Express to Time Capsule, I end up with an IP conflict (each wanting to be 10.0.1.1) and I only see one at a time -- one on my home network, the other on the Time Capsule's default MAC-id based network.
    - also, the Time Capsule tells me that I should update the firmware. except, since it's not hooked to the internet yet (not configured) it can't actually complete this step....how's that supposed to work?
    suggestions, links to the right article in the apple site?
    thanks

    Hi
    I never had very good luck with saving configurations and re-importing on my current Airport menagerie -- so I hadn't gone this route (also figured the two things would be incompatible).
    However, I did just as you suggested and the Time Capsule imported the Express configuration readily, and aside from having to change a couple of security settings, rebooted fine.
    For some reason, then the Time Capsule started working just like the Air Port Express. But, when I changed the name of the TC from Express back to something 'Time Capsule' and restarted - it was back to the old unresponsive way it was.
    - so I went through this re-importing exercise several times.
    When things finally stabilized, I noticed that the TC had some ups and downs with my ISP in getting an IP assigned. THis could have been from the ISP acting up the last week or so...or maybe the software?
    But in the end - Time Capsule is up running and backing me up wirelessly.
    Next trick is to add the Airport Express back into the network so we can stream some iTunes.
    Thanks for the idea.
    Oh - I guess this might also be of note - I hardwired the TC up to the iMac so I could continue the Time Machine back ups while I figured out the networking issues -- and it went ahead and updated it's firmware. Not sure if that helped or hindered so far - but it's running 7.4.2 now and I'm writing this reply via the TC.
    Dave

  • New time capsule+new airport express=daily dropped connections

    I have a new 2 TB Time Capsule and a new Airport Express that I puchased to update my old set-up of an Airport Express and Airport Extreme.
    I have the TC set-up as the primary base station in the back of the house and the airport express set-up to extend the network in the front of the house. I was getting constant disconnects up front for the first several days so I finally exchanged the new AX for another one thinking maybe the first one was faulty. I reset the TC back to factory defaults for good measure and re-set up my network the same way with the new AX.
    Two days with no disconnects, thought it was fixed, and then it started again...no joy. Not as often as with the first AX, but still it happens 2-3 times a day and always up in the front of the house while we're on our MacBook Pro or MacBook Air. When this happens both the AX and the TC have green lights and full bars of connectivity show in the menu bar, but yet no internet access. The only way to reconnect is to restart the AX. I have noticed too, that when this happens, the Airport Utility does not show the TC at all...even though it's light is fully green and it should be there, it just shows the AX until I restart and then both show up again.
    I've tried changing the channel from automatic to a specific channel but this really doesn't change things much. Now I'm starting to wonder if something is awry with the TC. I've also noticed that it sometimes fails to back up because it can't find a connection to my iMac which is right next to it in the back of the house.
    So far this upgrade has been more of a downgrade. Any help would be greatly appreciated!

    Just an update and still seeking some advice for this situation...anybody?
    I tried re-setting both TC and AX to factory settings and re-configuring. Still get at least 3-4 dropped connections up front on a daily basis; however, TC has been connecting successfully and backing up my iMac, so at least that seems to be ok.
    Still the same situation with the TC not showing up in Airport Utility every time the network connection drops happen...just the AX is seen until I finally have to restart the AX and then both can be viewed in Airport Utility and the internet connection is restored. Sometimes I can restore connection by simply toggling my airport access on and off in the menu bar of my MacBook Pro, but more often then not, I have to restart the AX itself to get back online.
    Is it possible that this could be an issue with the TC? Somehow it might be dropping the connection to the AX? I can still exchange it for another if this may be the case. I'm already on my second AX thinking that the Express was the problem initially.
    So far, nothing seems to help the situation. About the only thing that I haven't done is configure the AX to just join the network rather than extend it...but that would be defeating the purpose of why I bought it in the first place (to stream iTunes and extend network).
    I never had issues with my old set-up, but then I had it configured as a WDS because I didn't have the option to "extend" the network as it was an older AX and Airport Express.

  • I would like to set up a media server on time capsule using airport express and an ipad as a remote for dance studio

    I am wanting to set up a network for my business and was hoping if someone could tell me how to do this and if it will indeed work. Or if you have any better ideas.
    I want to transfer all music to Airport Time Capsule. I want to plug in the aiport express to my sound system. I want to access music through the ipad off the timecapsule to play it without downlaoding it on the ipad.
    We currently use Icloud, but there is too much music and too many devices accessing for it to work effectively. I am running a dance studio so we need more music than what could ever be stored on an ipad/ipod.
    As an extention to this, can we use multiple Airport expresses plugged into mutiple sound systems to simultaneously access different music from the same time capsule?
    Any ideas would be so great!

    The answer is not if you use iTunes.
    The TC is NOT an iTunes server.. it is not a media device at all. It is a backup location for Time Machine.
    You need a computer in the network which stores the iTunes library and you can then play it via the ipad.
    A mini with a large USB drive plugged in will work fine.. it doesn't need to be new.. a couple of years old mini will work just as well.
    As an extention to this, can we use multiple Airport expresses plugged into mutiple sound systems to simultaneously access different music from the same time capsule?
    I am not sure.. there will be network limitations to this.
    Look up how to use itunes in a network.
    http://support.apple.com/kb/ht4620
    You would do better perhaps posting the question in iTunes section.. if as I guess you are actually using iTunes.

  • I have a time capsule and airport express one floor lower, the signal keeps dropping. Would an airport extreme give me a longer range for wifi?

    I have several computers. My equipment is upstairs in a house, apple time capsule and downstairs airport express. Lately the downstairs computer keeps disconnecting from the internet. Would replacing the airport express with and airport extreme give me a greater range for my wifi connections?

    Yes.  Question is... would the difference be enough.
    The extreme has a bigger & more powerful antena array. But if that alone still doesn't suffice, you also have the option to use the express to EXTEND from the Extreme.

  • Network set up using airport extreme, time capsule and airport express

    I have searched for relevant answers but can only find different bits here and there.
    My set up is as follows:
    I have a Linksys wireless router running a stable wireless network for the other computer users in the house and wish to create an extended, additional network using airport extreme connected to the Linksys by ethernet to create the network and then time capsule close to my Mac Mini on my desktop and airport express at the other end of the house to try and extend the range of the network.
    I have been trying for 4 days to set this up but without success. I have tried all of the options mentioned in different posts, using WDS, extending a new network etc. I can get connection between the three devices but monitoring on iStumbler there appears to be little improvement in the strength of the signal, iStumbler also shows the time capsule dropping it's signal totally every 10 or so seconds for a few seconds and then I get a positive signal strength for another ten seconds or so.
    Can anyone help, it is driving me insane. I am a recent convert to apple computing and have been hugely impressed with all products until now. The claim that the set up of these wireless products is simple seems to be very exaggerated.
    I am happy to provide any relevant system or hardware information.
    Thanks in anticipation.

    I have an AirPort Extreme acting as a wireless base station, connected to a BT router by ethernet.
    Then the correct setting for Connection Sharing on the AirPort Extreme would be "Off (Bridge Mode)".
    If I set Connection Sharing to "Share a public IP address", I'm told that:  "The DCHP range you have entered conflicts with the WAN IP address of your Apple Wi-Fi base station"
    Exactly. You have two routers....The BT device and the AirPort Extreme in series with both of them trying to act as the "main" router when you configure the AirPort this way. That won't work.
    Only one can be the main router, and it must be the BT device in your setup. So, the AirPort Extreme....and any other AirPorts on your network must be setup to work in Bridge Mode to allow the network to operate correctly.

  • My network, based on modem, wifi router (Airport Extreme),Time Capsule and Airport Express simply disconnects with all the lights green on the modem and Extreme, but the other components offline, 5 or so times per day.  I suspect the Extreme.

    I have a Cisco System3 modem, feeding an Airport Extreme, which connects wirelessly a Timecapsules and an Airport Express both of which extend the network, ie send out more WiFi signal.  The system worked well for a long time, say a year and a half and then it started dropping out.  All the lights on the modem and airport Extreme stay green, but the other two components are blinking yellow. I've tried limiting the channels, but there are few sources in my neighborhood.  I have tried resetting the Extreme which worked for a week and now it's back to its random disconnect behavior.  I have read some of these blogs and no one seems to know what to do, especially not Apple.  Do I just get another router or what?  What do I lose if I use a non Apple router and what would you suggest?

    Welcome to the discussion area, Junkcanoe!
    I don't have a setup like yours, but might be able to offer some assistance.
    Basically I have two jacks, a TC and an AE and I'd like to create a roaming network. Both of them are set to bridge mode with the same SSID, WPA2 security, same password, etc.
    This would be the normal way to set up a roaming network, but the wild card here is that we don't know anything about how the main router that supplies the ethernet connections (valid IP addresses) to the condos might be configured.
    For example, most apartments, hotels, etc that provide ethernet jacks usually limit the number of devices that can connect to each jack. Hotels tend to limit this to one or two devices. I counted six devices that you say will work properly plus a few more. Since you have two separate ethernet jacks, you may be looking at a situation where each jack is allocated a total of 4 devices, or valid IP addresses.
    The bottom line here is that we won't be able to make much progress until we know more how the main router there has been configured. Is it possible for you to ask the complex manager (who will probably need to ask the IT guy) how many devices are allowed to connect per ethernet jack? Another way to ask the same question is how may valid IP addresses will each ethernet jack allow?
    If you can, could I ask you to perform an experiment? Rather than have both the AirPort Extreme and Time Capsule each connect to a separate ethernet jack, can you temporarily move one device near the other and connect them together using an ethernet cable? (Or, use a long ethernet cable if you don't want to move either device) LAN <-> port on one to LAN <-> port on the other. In other words, you'll only be using one of the ethernet ports in the condo for this experiment.
    Any difference in performance or number of devices allowed to connect?
    Message was edited by: Bob Timmons

Maybe you are looking for

  • Problem with initial download of a data object

    Dear All, I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCA

  • Can't restore a corrupt iPod classic?

    So my iPod nano 6th gen died on me last night so I decided to dig out my iPod Classic %th gen and see if it worked. I turned on fine so I was like "Happy days!" untill I pulgged into iTunes. When I plug it in I get this message: So I went through the

  • LSMW and transaction MM01

    Hi experts! I am going to extend several materials from one plant to another. Is it possible to use LSMW and batch input recording at transaction MM01 with the copy-function? Kind regards

  • Report of Changes made to Cusotmer requested and Actul Committed date

    Hi, Please guide me for the preparation of a report of Changes made to Customer requested date and Actual delivery Date. Which field should I take for the Actual delovery date and the field for Customer requested date. Finally the Tables for these Fi

  • HANA SQL for BPC cubes

    I have been looking for getting start help/ideas on how to push BPC BADI logic down to HANA SQL. Not really sure where is the right place my question. Which forum should I focus on?  Not much help in BPC forum on this subject. ~Dilkins