Time capsule painfully slow under windows 7

I'm using a time capsule (latest gen, 3TB) with both a Mac and a PC. The Mac uses Time Machine to backup and things work great.
However, on my PC (Windows 7), the TC is mounted as a network mounted (drive Z), and if I simply try to drag and drop files from my PC to the TC, it's painfully slow. At least 10x slower than on the Mac.
As an example, copying 500MB takes about 10 hours...
Any suggestions on improving performance using TC on a Windows 7 machine?
Thanks.

Download the free  iStumbler  app to examine the strength of your connection.
If it's not good, look for interference with another wireless device, cordless phone, microwave oven, etc.  Turn them off temporarily;  if you find an offender, move it farther away.  See  AirPort and Bluetooth: Potential sources of wireless interference  for more.
Try different WIFI channels.

Similar Messages

  • Time capsule painfully slow wifi

    New time capsule , painfully slow wifi , cisco works lightning fast so the issue is with the TC. Looked at forums and I see it's a common isssue. Any ideas that actually work?

    Download the free  iStumbler  app to examine the strength of your connection.
    If it's not good, look for interference with another wireless device, cordless phone, microwave oven, etc.  Turn them off temporarily;  if you find an offender, move it farther away.  See  AirPort and Bluetooth: Potential sources of wireless interference  for more.
    Try different WIFI channels.

  • 1st generation time capsule painfully slow

    I've been dealing with this issue for some time now.  I've searched all over the internet for a solution, and I've yet to find anything that works.  I'm hoping a Time Capsule expert may be able to help me sort this problem out.
    I have a 1st generation, 1tb Time Capsule.  I've had one since they first were released.  Use already had one fail from the dreaded dead power supply issue that was affecting many 1st gens after reaching 18 months old.  This one is less than a year old.
    I have Verizon Fios with a blazingly fast Internet connection.  When I plug directly in to my ISP's router via Ethernet, my connection is amazing.  I realize that wifi connections are much slower than Ethernet, but what I've been dealing with lately is ridiculous.
    I believe the problem lies with the Time Capsule.  It's set to 801.11n, 5ghz only, maximum throughput (24mbps), WPA2 personal security, latest firmware.  Wifi connections via the TC are great at first, but they seem to degrade as time goes by until I finally have to reboot the TC, then the speeds are back up to normal again for a while.
    The problems also seem to arise whenever a computer is backing up to the TC.  I understand that speeds might slow down while a backup is occurring, but I would expect that they would return to normal when the backup is complete.  Unfortunately, the speeds often slow down so much that the backup never actually finishes, and often it comes up with an error saying that the disk is no longer available.
    Trying to share a file between my macs is often impossible.  Even a small file, say 5mb, can take minutes to transfer between to wifi-connected devices.  Sometimes a TC reboot with fix this, other times it won't.
    My setup is like this - Verizon router with wifi disabled, serving as the DHCP router for my entire internal network, connected via Ethernet to my Time Capsule and an Airport Express.  The Time Capsule is set up in bridge mode and serves as the 802.11n wifi source for my newer wifi devices.  The Airport Express is also set up in bridge mode and serves as the 802.11b/g wifi source for my older wifi devices.
    Due to the nature of the Fios service, I can't have the Time Capsule set up as the DHCP distributer for the network.  However, even when I didn't have Fios and the Time Capsule was set up as the dhcp distributor, I suffered from these slow connection issues.
    Are the 1st generation TCs plagues with issues?  Is it just time for me to get a new one?
    Any help or insight would be greatly appreciated.

    Unfortunately, you are experiencing one of the downsides to 5 GHz. That's because the higher frequency 5 GHz signals are much weaker than 2.4 GHz signals.
    After all, you always have to give up something to gain something else. In the case of 5 GHz, you gain potential speed but in return, you must give up penetration power and distance capability.
    In order to work well, 5 GHz signals need to almost have a line-of-sight relationship between devices. Unless you can achieve this, you will do much better to leave the Time Capsule running at the 802.11n (b/g compatible) 2.4 GHz Radio Mode and allow the Express devices to "extend" that network.
    As for the location of the AirPort Express devices in an exended network, that is critical for best performance. That's because the Express can only "extend" the quality and bandwidth of the signal that it receives. Post back if you need a few more tips on how to find the best location for the AirPort Express devices.
    Would the new airport extreme fix the problem?
    Unfortunately, no.

  • HELP! Time Capsule painfully slow

    OK, so I bought a new 1TB Time Capsule yesterday.
    I installed it yesterday and during configuration, it copied over the profile from my old Airport Base Station.
    My internet slowed down dramatically (1.5B per dsl reports) and I started my Time Machine backup before going to bed. When I woke up, it had backed up 18GB of 240GB!
    When I came home tonight, I reset the unit and recreated my network from scratch manually.
    My internet is back up to 4.2mb (per dsl reports again), but the backup speed is only about 500K/minute.
    What am I doing wrong?!?!? If this is the true speed of TC, I feel very duped by Apple. There is no way this a viable wireless backup device at these speeds!

    Just to offer you an example of one series of performance read/write testing of the Time Capsule (TC), the following is an excerpt from MacInTouch Special Reports for a speed comparison of the internal hard drive vs. a USB drive attached to the TC. This is just one example, others may show different results, but this should give you an idea of what could be expected for comparison to what you are experiencing.
    "It's not a speed demon, but it is very consistent, yielding 10.2 MB/sec. for reads and 8.9 MB/sec. for writes in AJA Kona System Test, over a 5-GHz, 802.11n wireless connection from our Mac Pro. Over Gigabit Ethernet wiring, we saw 17.1 MB/sec. for reads and 12.6 MB/sec. for writes.
    The external USB hard drive we tested was somewhat slower, with 16.7 MB/sec. reads and 8.9 MB/sec. writes over Gigabit Ethernet wiring. But, using the USB disk over 802.11n wireless was much slower, yet, than using the internal disk."
    Even Apple recommends that the first Time Machine backup should be done with your Mac connected by Ethernet to the TC. (ref: Backing up with Time Capsule for the first time)

  • Time Capsule Painfully slow internet over wireless (not so over ethernet)

    I dont know what it is, but when I use the TC over wireless, it is over 10 times slower than if I just stick an ethernet cable in my macbook. I get 50k/sec TOPS over wireless. I get 600-2MB/sec over the ethernet.
    Im seriously using an ethernet cable right now because I cant stand it.
    I have restarted the thing 50 times now. (modem too)
    I have an N capable macbook.
    I have time machine TURNED OFF
    I have tried all different frequencies.
    It is not just my macbook, but every wireless device on the system.
    I had an N basestation I replaced, it was super fast.
    My ethernet and airport settings are identical.
    I have tried. all settings of B,G,N 2.4 and 5ghz.
    I have tried interference robustness on and off.
    It is not the internet going to it, and it is not the environment it is in as It is sitting in the exact same place my N base station was in.
    I seriously hate this thing right now... And I am as big of an apple fan as they come.
    Please help me!

    I unplugged it again and plugged it back in again... and it seems to have worked.
    Why it didnt before, and how long this will last is anyones guess.
    I just wish it was as reliable as my previous N base station.

  • How to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    how to use Time Capsule via INTERNET WITH WINDOWS 7 SMB Cloud

    Get a vpn router.. I have no idea where you are in the world but you can find reasonable stuff for not too much money or even a general router that takes third party firmware like dd-wrt can run openvpn. 
    Set up the vpn router in place of the TC, as the main router in the network. Simply bridge the TC and place it behind the router. It will be accessible as part of the network via the vpn.
    This is the only safe way to do it via windows.
    http://www.dyncommunity.com/questions/18132/accessing-time-capsule-from-windows- 7-over-the-int.html
    If you google around I have seen posts about how to access TC by port forwarding SMB on the TC.. using a different port.. To me this is going to slow down the hackers by a day or two.. then they will discover the open port and access your network.. not just the TC.. they now have SMB access to everything. Don't do it. There is very little security on SMB.

  • How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?

    How can I get a better driver for my 1394b Hostcontroller in my Macbook pro 2010 to solve the problem, that it is too slow under Windows 7 installed with bootcamp ?
    WIndows can't find a better one than the installed LSI Conformed 1394 Hostcontroller

    Read and follow the Bootcamp Installation instructions that you were offered to view when you ran Bootcamp Assistant.
    Run Bootcamp Assistant again and select the option to download the Bootcamp Support software. Follow the instructions. Then boot into Windows and install the Windows Support software you downloaded and saved.

  • Can time capsule be used with windows programs

    can time capsule be used with windows as a wi fi router? or dose the disk that came with the time capsule work with windows program?

    The wifi router side will work fine.
    The disk that came with the TC should have windows version of airport utility but you can download it.. that is important if you want to setup the TC or use the shared disk.

  • Access Time Capsule via WAN on Windows

    Hello
    Please can someone tell me if they have been able to access a time capsule remotely from a windows box? I have afp working on Mac, but need a similar solution for windows?
    Thanks
    Mike

    Connect an Ethernet cable from one of the three LAN <--> ports on the Time Capsule to your Mac. Turn off the WIFi on the Mac and you are all set.
    Whether or not the Ethernet connection will result in significantly faster performance when you enter Time Machine is open to question, since a lot of data must be loaded when you start up Time Machine to look at backups. In most cases though, a wired connection will load things faster than wireless.
    Please let us know on your results.

  • I have a 2TB Time Capsule I want a windows vista workstation to be able copy 2 it.

    I have a 2 TB time capsule, I want a windows vista machine to be able to copy files to it. Different people gave me diferent pieces of advice,  some say partitition the time capsule, others say enable SMB on the vista machine.  Since I am not well versed with Time Capsule.  I need someone knowledge to be transferred via this medium so that I can configure my home environment to acheive what is stated in this email.  The way I am configured is The time capsule is also the router, there is one macbook connected to the router and on vista machine connected.   I have not partitioned the time capsule at all.  I am sure there is this type of configuration out there,  Some readers from this forum must know how to do this.  I would like to achieve this without partitioning the time capsule.  Is SMB a good way?  Thank you

    1. Can you ping the IP? If not make sure you are on the same ip subnet.
    Turn off the firewalls, and ensure vista is set to home for network, not work or public.
    2. Once you can ping the TC, try again to get access from Windows Explorer.
    If it fails, ensure the disk share in the TC is set to WORKGROUP or whatever is the correct workgroup for the vista machine.
    Also ensure the guest access is turned on and you have read and write permissions.
    This will work.. you just have to make it.

  • Time capsule disk slow

    Hi all. First post and relatively new Apple user. I have a question.
    I bought a time capsule and found it incredibly slow at disk writes. Setup is as follows.
    Lyksys router with time capsule connected via ethernet. Time capsule has created new wireless network and has one wireless client, my macbook pro. I also have a mac mini plugged in the back of the time capsule with it´s wireless turned off. The mac mini has a usb disk attached.
    I´ll spare the details but planned to use time capsule as a central location for movies, iTunes and photos (I planned to rsync this data to a usb disk attached to the time capsule from time to time). I am not using time machine.
    After much upgrading, downgrading and mucking about, the time capsule got to useable speeds. However, my test is "time cp rugby.avi /Volumes/Data" where rugby.avi is 700MB in size run from my macbook pro.
    Best speed I have achieved is 1m 40s. This morning I ran the test before going to work and got 1m 50s. Came home, did nothing except run the test and get 2m 45s. Run it again 3m 25s. Run the test to the mac mini and get 1m 22s. Then to the usb dsk attached to the mac mini 1m 40s. Then du time capsule again and get 3m 50s.
    To copy the data to the macmini, the data must go through the time capsule wirelessly so we can rule that out as a source of the peculiar speed difference.
    My real point is that time capsule seems to have a problem actually writing to the disk. I have no idea what this is and so have decided to return it.
    However, if I buy an airport extreme and plug a usb disk in it, does anybody think I might get speeds close to what I get transferring now to the mac mini or should I just get myself another mac mini, after all, it seems a lot faster than using time capsule.
    Hope you can help.
    Regards

    Thanks for the reply. I´m not too concerned with real numbers as such though they are obviously interesting. All I know is that copying that fine in under 2 minutes is good enough for my purposes. Copying remotely to the mac mini internal disk and also remotely to a usb disk attached to the mac mini gives me a speed I am happy with. Time Capsule can also occasionally compete too but mostly gets nowhere near it.
    I´ll check out your links but I guess would like to hear if anybody has been complaining about the airport extreme with attached usb disk being slower than they expect.
    Thanks again for taking the time to reply though.

  • Time Capsule VERY slow ethernet back-up on my iMac

    Hi anyone who can help....I'm getting really frustrated with Time machine
    It seems quite afew people are experiencing problems with TC....
    BUT they all seem to have different issues. Mine is simple.
    As a wireless network it works just fine, last weekend i had some friends over and we had 4 laptops going at once - speed was fine
    Backing up - My G4 powerbook works FLAWLESSLY, backing up wirelessly.
    BUT...My G4 iMac (connected directly via ethernet cable) hasn't been able to do a back-up since got it. It gets stuck on preparing or takes day's (Yep DAY's) to do a few 100 MB.....
    Obvoiusly the TC is working, but not the wired connection. I can't try my iMac wirelessly, as it doesn't have an airport card
    ANY suggestions? Oh and I don't have any virus software installed

    Andrew,
    *_Slow Time Capsule Transfer Via Ethernet_*
    *Disable Anti-Virus Software*
    “Using virus scanning software can make Time Machine backups very slow. If you use Norton Antivirus 10 AutoProtect or a similar product, try turning it off during backups.” [http://docs.info.apple.com/article.html?path=Mac/10.5/en/15140.html]
    *Create An “Ethernet Only” Location*
    While you are physically connected to the Time Capsule via ethernet you may still be experiencing slow data transfer speeds because your Airport network is still active and taking priority.
    Connect one end of a Cat-5 Ethernet cable into one of the LAN ports of the TC (<•••>) NOT to the WAN port (wheel icon). Connect the other end to your Macs ethernet port.
    Next, go to System Prefs --> Network.
    At the top of the window note what “Location” you are currently using, as you will need to return to this setting later.
    Now, change “Location” to “Edit Locations”.
    Click the “+” button and create a new location named “Ethernet Only”.
    Click “Done”.
    In the Services Pane on the left, eliminate all other services using the “-” button leaving “Ethernet” only. If you choose to leave other services listed then al the very least move Ethernet to the top of the list using the Action Menu (gear button) at the bottom and "Set Service Order".
    Verify that “Configure” says “Using DHCP”.
    Click "Apply" in the lower right.
    You should be seeing an assigned IP Address and the Status should say “Connected”. The dot beside “Ethernet” should be green.
    Now begin your backup or transfer of files.
    You should still have internet access during this period.
    Once the backup/transfer is complete, remember to change the Network Prefs “Location” back to “Automatic”, or whatever setting it had originally been, to restore Airport connectivity.
    *Adjust Ethernet Speed*
    Open Network Preferences.
    With Built-in Ethernet selected on the left, click "Advanced" in the lower right.
    Click "Ethernet" tab on the far right.
    What is selected beside "Speed"?
    Try changing this setting and see if it makes a difference.
    Next launch Airport Utility.
    Select the Time Capsule on the left.
    Click “Manual Setup”.
    Select “Internet” from the toolbar.
    Click “Internet Connection” tab.
    Near the bottom verify that “Ethernet WAN Port” is not set to a slower speed. Either choose “Automatic” or the fasted speed available.
    If you have made any changes, click “Update”.

    *Slow Full Backup After Restore*
    Try either deleting the “old” backup disk image or copying it to another disk. Then start the “new” full backup again. Some users have experienced improved speed when the “old” disk image was removed from the backup disk.
    Let us know if this was helpful.
    Cheers!

  • How to access Time Capsule 2013 disk from Windows 7

    I have seen several (older) threads that suggest that you can access the Time Capsule disk from Windows 7 using Windows Explorer and navigating to \\Time-Capsule-Name.  However, I have tried this repeatedly and just cannot get it to work. 
    Could this be a bug or unsupported in the latest 2013 Time Capsule?
    In Airport Utility, under Disks > File Sharing, I have Enable File Sharing checked.  The workgroup is WORKGROUP. 
    The IP address is 192.168.1.4.  I am able to ping it successfully; I just cannot access it through Windows Explorer.
    Am I missing something?  Please help!

    Are you running homegroup on the PC..??
    That should definitely be turned off!!
    Homegroup can mess things up.
    I would try with ipv6 off but that might make no difference at all.. leave it set to local-link if it doesn't do anything.
    There was issues when the Gen4 came out with security. Windows uses too high an encryption level..
    See info here.
    http://www.dummies.com/how-to/content/changing-file-encryption-settings-on-a-win dows-7-h.pageCd-storyboard,pageNum-5.html
    Change to 40 or 56 bit encyrption.
    Unfortunately some of the controls you think you are setting on the TC are not really being set at all.. eg I doubt you are actually changing the workgroup.. if possible though you should have disk access set to lowest level .. device password and you should also turn on guest account to read and write.. that usually solved access for me in earlier TC .. I haven't bought an AC for the moment.. because.. well I believe I have done my time on the war front. I bled out already on the bleeding edge.. time for you to do it and I can reap the benefits on the second hardware revision and about the 10th firmware update.
    Other things I would try if the above don't work.
    Factory reset and start over.. you moved the IP of the TC and that is unwise.
    Do not worry about the various settings.. do the factory reset.. in full isolation from the internet. ie TC plugged into the windows computer. Nothing else in either..
    Now try at the default IP of the TC..
    \\10.0.1.1
    Beyond that you need another computer to try or some device. iOS would be fine... in normal situation you would test other protocols, eg ftp but TC offers only SMB and AFP.. there are no AFP clients for windows that I have heard of.. you might have success if you boot the PC from a linux live cd.. it should be able to read AFP even if it cannot write to it. But the SMB is more important. If linux can access with SMB protocol and windows cannot.. the issue is windws OS.
    Or iOS devices have some AFP file browsers available but again just test with SMB.. most file browsers for iOS use SMB.. if other devices can manage SMB protocol to open files on the TC then the finger points very clearly to the PC as the trouble.. on the other hand if nothing can access SMB then the TC is faulty and should be replaced.

  • Time capsule is slow and inconsistent

    It seems that the wifi is much slower than my old airport extreme, and inconsistent in terms of connectibility and strength. Any hints? I've been at this for two days.

    All,
    Maybe trying some of these suggestions will help?
    *_Slow Time Capsule Transfer Speeds_*
    *Initial Backup Best Over Ethernet*
    It is recommended that you perform the initial full backup via ethernet, then all subsequent backups via wireless.
    *Transmit Power & Wide Channels*
    If you are using the 802.11n only (5 GHz) radio mode, you can also select to use wide channels, which provide higher data throughput in your network.
    Launch Airport Utility
    Select your Time Capsule on the left.
    Click “Manual Setup”.
    Select “Airport” in the toolbar.
    Click the “Wireless” tab.
    Click “Wireless Options...” at the bottom of the window.
    Adjust the “Transmit Power” to 100%.
    Put a check mark in the box labeled “Use Wide Channels”.
    Click “Done”.
    Click “Update” in the lower right hand corner.
    Wait for the Time Capsule to restart and then see if your network speeds improve.
    *Anti-Virus Software*
    Are you running anti-virus software. Disable it and see if network speeds improve. The discussion boards are filled with users who are experiencing degraded network speeds due to their anti-virus software.
    One poster observed: “I had the exact same problem 5mins ago, it had taken 2 hours to back up 2GB, I realized I installed Sophos anti virus a couple of days ago. When I turned that off my back up is speeding through.”
    Another contributor stated, “I am doing the first backup to my time capsule, about 71 Gb, It seems to be going about 1 Gb per hour. is this seem OK? I tried the ethernet connection and the speed was about the same. It has been going all night and after 12 hours it is at only 12 Gb of 71….I found the problem, I uninstalled Norton and the problem went away. It backed up in about 3 or 4 hours”
    *Wireless Security Issue*
    Some who have experienced degraded network speeds have isolated the problem to their wireless security setup. Try this:
    Launch Airport Utility
    Select your Time Capsule on the left.
    Click “Manual Setup”.
    Select “Airport” in the toolbar.
    Click the “Wireless” tab.
    Change “Wireless Security” to “None”.
    Click “Update” in the lower right hand corner.
    Wait for the Time Capsule to restart and then see if your network speeds improve.
    Granted, this is far from desirable. But it does help to isolate the problem in you instance. Maybe simply resetting the security with a new password will help?
    Let us know if any of these procedures helped.
    Cheers!

  • External Hard disk connected to time capsule not visible in windows vista

    I have connected my external hard disk to Time capsule. Am Able to find the same in my MBP in finder under shared. But with windows I am not able to see this hard disk. I have installed airport utility and am able to see the time capsule. What to do?

    What is the format on the external USB drive?
    Have you setup the disk in workgroup correctly to the network workgroup name?
    Turn on guest read and write at least to get things started. If you turn on password or changed the default password you will need to remember that.
    How are you trying to access the disk? It will more than likely not show up in network shares, without deliberately using the tc ip.. so open explorer and type in \\YOUR_TC_IP_ADDRESS\Share_name
    If you have installed the airport utility for windows it should also install the required files to find the disk.

Maybe you are looking for

  • Display Multiple reports in a single query view

    Hi Team, I have 3 similar reports for MTD, QTD & YTD. While displaying the report in the portal..  I want to display the reports in a single view wherein the MTD report will be a default report for the input selections. whereas the QTD & YTD will be

  • Tecra M2 - No sound using Win XP

    Hi. Im from the states by the way. I couldn't get logged into the other Toshiba forums. (Don't ask.) So ill just seek help here. I have an Audio/Speaker/Sound Card Problem. I'm not sure which one it is, if any. I have a Toshiba Tecra M2, Not sure wha

  • Windows 7 Driver for HP 1215 Photosmart Printer

    I've just bought a Windows 7 laptop, and followed these instructions for installing a printer driver for my HP Photosmart 1215 printer.  However, the printer is on the network, attached to my desktop computer.  I'm having no success adding it as a ne

  • My iMessage is still not working with my iPod touch 5th generation, and I don't understand the whole troubleshooting thing

    I read the thing for the troubleshooting messages and I don't understand it. I just want to send and receive messages on my iPod touch 5th generation 

  • XML Web Service as data source

    We are researching the option of using a web service as the data source of a Crystal report. There are a couple of points that I would like your input. 1) How are report parameters passed to the web service? 2) Are there any known performance issues?