Time Capsule performing full back up at each attempt

My time capsule performed a full back up when I originally set it up. However, it continues to try to back up the full hard drive every time it backs up, rather than just changes made. Tis means that it takes a very long time and does not ever back up properly.
How do I amend the settings to the back up so that it only backs up changes and is more efficient?
thanks

check D3 in Pondini's [_*troubleshooting user guide*|http://web.me.com/pondini/TimeMachine/Troubleshooting.html].
JGG

Similar Messages

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?

linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster.

How do I set up my new Time Capsule just to back up not as a wireless?

Can anyone tell me how to use my new Time Capsule just for back up not as a wireless router?
I have an ATT Uverse for my wireless service and have not been able to get the two to work together.
I just want to plug my Time capsule in and connect it to my MacBook Pro with an ethernet an click backup.
So far my computer doesn't reconnect the Time Capsule.
Thank you for your help

You will need to configure the Time Capsule (TC) to join the wireless network provided by the ATT Uverse router, as follows:
Either connect to the TC's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the TC, and then, using the AirPort Utility, change this setting:
AirPort Utility > Select the TC > Manual Setup > AirPort > Wireless tab > Wireless Mode: Join a wireless network
Wireless tab > Wireless Network Name: <select the ATT Uverse network>
This configuration will allow your Mac to connect by wireless to the ATT Uverse router and perform Time Machine backups wirelessly.
If you want to only do this backups by wire, then you will need to connect the TC directly to the ATT Uverse router by Ethernet, and then, reconfigure the TC as a bridge. You can then connect the Mac to the TC by Ethernet as well for backups.

Time capsule no longer backing up after 10.6 upgrade

After upgrading to OSX10.6 my time machine (through time capsule) is not backing up anymore. I can connect to the disk through finder and also through the time machine application. I can also see my backups from 10.5 and there are no issues with the wireless or router.
During attempted hourly backup the error message is:
The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.
Latest successful backup: 27/09/2009 at 15:29
it seems that i am not alone in this post OSX10.6 problem but have not found any solution yet - anyone help?

Just thought i would update after finally resolving this.
Tried many things after trawling the internet, eventually including reformat.
Established it was an error 11 via 'TM error log' and final solution was to change the names of one of my hard drives which had a '-' and a '/' in it.
These names had not caused any problems for 6 months under 10.5 but seem to be the issue under 10.6......
Time Machine has done a full backup and regular hourly ones for the last 2 days
still having a couple of spurious issues with 10.6, cannot force a shutdown from my account if my wife is logged in - i have to log her account out before i can shut down.

2TB Time Capsule suddenly full after only a few months?

Hello all,
Apologies in advance if this is a question that's already been answered. I've been searching through threads, but didn't seem to see it.
I have a late 2009 iMac (27 inch, 2.8 GHz i7, 4GB Ram) that had a hard drive affected by the Seagate Recall. About the same time I was alerted to this, the Firewire drive I'd been using for timemachine backups reached it's capacity. I figured it was time to get a bigger backup drive and went out and bought a 2TB Time Capsule. This was on November 5th of 2012.
After making a bootabe clone of hard drive (just as a 2nd backup) I set up my time capsule. I did the first backup via ethernet, and then, per posts that I found on the forum,( I set it up so that it was connected to my existing wireless router via ethernet, and let my iMac back up to it wirelessly over the home network. Once or twice, when I've changed large amounts of data, I've reconnected the iMac to the timecapusle via the ethernet cable and let it backup that way. But overall, the backups have happened over the air. My home user folder is aprox 632 GBs.
I also had tried to set up my macbook (Intel, late 2006) to back up to the same timecapsule, but was having issues and ended up just turning time machine off since I haven't had time to trouble shoot them. That macbook (which only has 60 gig harddrive on it) has at least one full backup on it's part of the Time Capsule, but not many more.
So basically my setup looks like this:
Cable Modem connected to Belkin Wireless Router via Ethernet
2TB TC connected to Belkin Router via Ethernet in Bridge mode.
iMac connecting to TC via the wireless network created by router. (with the exception of a few times)
Today, I was surprised that, only a couple months later, that Time Machine told me that the Time Capsule was full, and that it had deleted older backups to make room. My earliest back up is now Dec 6th 2012.
Previously, my 1 TB firewire drive lasted several years before it started having to delete older backups.
Am I right to think this is out of the ordinary? And if it isn't, can anyone point me in the right direction to try and figure out why this is ocurring. I'm not really sure what the first step in trouble shooting the issue would be.
Thanks so much in advance,
avi

Thanks for the quick respons djcastaldo.
I'm not 100% sure what you mean by a "virtual machine"... but I'm guessthing that means I'm not doing it..
I do have about 64 gigs in my dropbox folder... but the day to day changes to the files in there are fairly small (mostly updates to word processing files as I move between computers). I don't think that would be the issue.
Would the best way to try and find the culrprit file be to just scan through my home folder and look for large files with recent "modified" dates?
Thanks so much,
avi

My time capsule is not backing up my macbook. Password issue. My other mac mini connected wirelessly works fine and backsup correctly.

My Time capsule is is backing up my Mac Mini just fine, however, my Macbook keeps asking me for the password and it does not like any of the passwords I use. I have since used a pen to reset my Time Capsule and it reset all the network passwords for all 11 devices I had linked to it, however, it did not resolve the issue of my backup issue. Ironically, the macbook still connects wirelessly with my macbook so I can surf the web with it, however, it does not backup on that same device because it must have a different password... Not sure what to do since my Mac Mini is backing up successfully. I must have chosen a different password and it saved to that device, is there a way to display the Time Capsule password on my mac mini so I can attemp to use that on my macbook?

What is the current setting of the TC disk access? It has three main levels, device password, disk password and user names and passwords. If you have it set to the last you will need to create a new username and password for the MacBook or recover what you were using.
Have you ever done a backup to the TC via the MacBook?
What OS does it run?
The default password if you did not set anything is public.
Try manually mounting the TC disk on the MacBook and see if that allows TM to find it.
There is a lot of useful setup and troubleshooting info here.
http://pondini.org/TM/Troubleshooting.html
I would install the widget.. A1 and do a full reset of TM in the laptop, A4. As well as verify if you have already done a backup.. A5.
Basic setup of TC for TM is explained here.
http://pondini.org/TM/Time_Capsule.html
Recovery of passwords is possible but should not be necessary.
See info here.
https://discussions.apple.com/docs/DOC-3372

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files? Also, how do I add co-workers to my work time capsule and wife to my home time capsule? Thank you!

You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
You might be better using a real backup software.. superduper, CCC, chronosync etc.
The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

Time Capsule won't back-up; it just stays at "Preparing Backup" What can I do to resolve it?

My Time Capsule won't back-up--it just stays at "Preparing Backup" while trying to perform the backup. Do I need to reboot, and if so, how do I do that? Thanks!

On Leopard, it's hard to tell what's going on. See #D1 in Time Machine - Troubleshooting.

HT3275 My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. What happened?

My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?

abailey46 wrote:
My Time Capsule has been backing up without any problems and all of a sudden it stops reading on my computer. The external hard drive beeps three times and the motter wont run within. The light that usually blinks while in use is no longer blinking and is on constant. What happened?
Sorry we are unclear as to the external hard drive and its connection to the TC..
For instance the light that blinks.. is that the TC or external hard disk or what.
Did you try just rebooting / restart the whole network in correct order.. modem.. router / TC.. external drive.. clients with 2min gap between each.
Are you actually running Snow Leopard as the profile states?
How old is the TC?

Time capsule will not back up my iMac since I replaced the hard drive

I replaced the hard drive in my iMac, now time machine won't back up to time capsule because there is not enough space. I believe time machine/time capsule thinks the new hard drive is a new computer and therefore must perform a new complete backup even though the data on the new hard drive came directly off the old hard drive (the was backed up on time capsule. Our time capsule is currently backing up two computers (both Macs). How do I get time capsule to start backing up the new hard drive?

You'll have to be more specific -- that's like emailing an auto mechanic saying only "My car won't start."
Has it ever worked?
Does your Mac recognize your Time Capsule?
Do backups start?
If so, do they hang, or fail? If they fail, with what message?
Start with Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

Time Capsule--can I back up Two different Laptops on the Time Capsule?

It's just about that easy. I just got the Time Capsule. I backed up my MacBook Pro. Now I'd like to use the same Time Capsule to back up my wife's MacBook. Can this be done? If so, how? I keep getting the failed message from the Time Machine Backup.
Thanks for the help.
Dave

No question that it can be done. I just got a new MacBook a couple of weeks ago and I am backing it up to our TC alongside my son who has been using it since last Sept. with his MacBook. There was no problem setting it up. I just clicked on TimeMachine in the Dock and it asked me where I wanted to back my files up to. The only choice was the existing Time Capsule. I clicked and away it went. I took the advice of others and connected my Mac directly to the TC for the initial backup instead of relying on the wireless. It only took a couple of hours.
What specific error do you get?

How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and Power Book

How do I transfer data from one time capsule to new time capsule when TC backs up an iMac and MacBookPro

It is generally better to leave the old backups and start again.. unless there is something you particularly need.
But if you desperately want all the old backups you have to copy the sparse bundles.. this will take very long time as it must copy via the computer..
http://pondini.org/TM/18.html
Take particular note of the initial comments.. ie before you read how to do it.. don't do it.

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??

If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.

Time Capsule performing full back up at each attempt

Similar Messages

Maybe you are looking for