Time Capsule "Preparing" time increases with use

Hi,
I've got a 1st gen MBP with a 320gb drive filled to 230gb with about one million files, used relatively lightly (roughly 2gb of new backup data per week.)
I have a 1st gen Macbook with a 120gb drive filled to 90gb with about a million files. It generates a bit less backup data than that -- around a half gig a week maybe.
The initial backups, conducted via wire, went smoothly. And the first few incrementals went smoothly. I reduced the backup frequency to 8 hours and we were good to go. For several months it performed just fine.
However, the "Preparing backup" portion takes longer and longer, either wired or wireless. When wired it's livable -- takes perhaps 3-5 minutes to prepare -- but when wireless, it's not. Hours and hours to backup 9.1kb -- all in the Preparing stage.
After having some sparsebundle corruption which i corrected using hdiutil/fsck, I archived the backup data to a hard drive, flushed both backups, and wired up each computer and started over. Resetting the backup returned the snappy feel right away. But again, several months in, the performance has gone through the floor.
I hope that's enough information to get some helpful results.

Whoops. 1TB Time Capsule, internal drive, Capacity 929gb, used 358gb, users 1.

Similar Messages

  • Is it possible for Apple Time Capsule place iphoto library and use it with my macbooks

    Is it possible for Apple Time Capsule place iphoto library and use it with my macbook pro & macbook air? How about the simultaneous use? Will I as well open it in my ipad and iphoto?

    How Come? I thought that to an external drive move iphoto library is not a problem  -  https://discussions.apple.com/thread/3012995?tstart=0. And Apple Time Capsule including the an external drive.

  • Just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    just installed a new time capsule and i want to use my airport express to extend my wireless range....time capsule working with existing devices at this time...but i am not able to get airport utility to recognize the airport express.....????

    Temporarily connecting your AirPort Express to one of the Time Capsule's Etherent LAN <-> ports...as LaPastenagure suggests....is always a good way to setup and configure other network devices.
    If you want to configure the Express using wireless, remember that the Express broadcasts a default wireless signal with a name like Apple Network xxxxxx. You must log on to this network first....no password is required....then open AirPort Utility to "see" the AirPort Express.

  • My Time Capsule does not work with existing WiFi

    Following a question solved on March 24 by LaPastenague, but gone bad again.
    Apple AirPort Time Capsule
    I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
    I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
    Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured,  but then it works.
    The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
    So, I am curious if you have any idea ?
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

    I can deal with the last question first and easily.
    I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
    Open the airport utility .. go to the disk tab and select erase.
    When you select erase you will get mulitiple options.
    Quick removes the file table but does not delete the files,, it takes 2min or less.
    A Zero out data is the secure way,, by writing 0 ie low level drive format.
    It can take several hours..
    7 pass will take a week.. not recommended..
    35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
    Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
    The fact that it did work and has now failed might point to faulty unit.
    The only way to tell is reset it properly to factory and start over.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
    Remember to keep all names short, no spaces and pure alphanumeric.
    Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

  • Time Capsule and time machine with third party router

    Hi,
    This is the first time I use this site.
    I have over three years old Mackbook.
    APP has expired.
    Now I want to know how to set up time capsule in a new environment.
    I moved from Australian and Singapore.
    I was using Time Capsule and Airport Extreme in Australia.
    I have moved to Singapore.
    I am using router provided by Singtell(Singapore Telecommunication). I do not have an Airport Extreme anymore. My housemate and I are using wireless internet-sharing. Needless to say that internet provider is SingTell.
    Now I would like to know how to use time capsule and time machine with the network created with a router provided by SingTell.
    What I did so far is;
    Connected the time capsule to the power point.
    Orange lamp lit and flashed for a few second and stop. Orange lamp stayed on.
    Apple Utility does not recognise Time Capsule.
    I prefer to use it wirelessly.
    There are only two USB cable ports installed.
    One is used to synchronize iPhone.
    Other is used for a printer.
    but if it is not possible, wired would be OK.
    MacBook 13 inch 2.0 GH Late 2006
    I hope that someone able to give me an answer for this.
    Cheers,
    morepubholidays

    In this case the apple support people reveal a truly poor understanding.
    You must bridge something.. you either bridge the TC.. which 90% of people do.. or you bridge the dsl router.. which some people do manage to do.. You will have to look that up for your modem and check with verizon if they support pppoe authentication.
    IMHO just bridge the TC as you were told not to do.. as they are simply wrong about that.
    If you already tried this and it didn't work.. try again.. it is the correct approach.
    You have no choice. But this time let me suggest you do it using the 5.6 airport utility.. as the apple toyland v6 airport utility is likely half your trouble.
    So here is how to get the utility into your computer.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0
    Then open the manual setup on the 5.6 utility.. go to internet tab. Connection sharing.. off bridged mode.
    Select this and update..
    Then all your IP addresses will be wrong.. I suspect this is where things are going wrong.. and messing you up.
    Once the TC is bridged.. turn off everything and restart.. in correct order.. modem.. TC.. client computers etc. 2min gap between each.

  • How to share 1 time capsule to 2 macbooks air, using Time Machine?

    How to share 1 time capsule to 2 macbooks air, using time machine??

    You don't need to do anything.. both computers can use the TC and will create separate backups. It is simply designed to work with Time Machine.

  • HT3728 My Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all

    Giancarlo Messalli wrote:
    1) are you sure a reset holding the reset button will not delete my data?
    Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
    For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
    2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
    Thank you again
    I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
    Here is the Apple info on reset.
    http://support.apple.com/kb/ht3728
    And here is the quote from the horse's mouth so to speak.
    Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility.

  • Can I connect old Time Capsule to new iMac with Ethernet?

    I recently purchased a new iMac, and I am trying to use a 2008 Time Capsule for back-up.  I successfully used the Time Capsule for back-up with a MacBook for the last four years, but the iMac's Time Machine won't recognize the Time Capsule as a back-up device.  I have the two devices directly connected with an Ethernet cable, and no longer use the Time Capsule for MacBook back-up.  I have rebooted the iMac and Time Capsule multiple times, but the Time Capsule light still flashes amber.  Help?

    Press and hold the reset for 10sec.
    Make sure the ethernet is set to auto and does actually get an IP address from the TC.
    Turn off all other network connections.
    Download and install 5.6 airport utility if you are still on Lion.. it will give you far more useful info and actual tools not toys like the Lion version.
    http://support.apple.com/kb/DL1482

  • SHARE TIME CAPSULE AS THROUGH INTERNET WITH WINDOWS 7 SMB

    SHARE TIME CAPSULE AS THROUGH INTERNET WITH WINDOWS 7 SMB

    Most ISP correctly block SMB over internet. It is too insecure .. use VPN to a different router and place the TC behind it.
    Besides TC does not expose SMB to WAN.. same reason. You have to port forward SMB.
    You can use SMB on some strange port.. there are instructions if you want you networked just use them.

  • Time Capsule doesn't work with proxy?

    Hello! I have a Time Capsule working with an ethernet connection which is controled by a proxy server. I don't see the option to configure TC in order to download the .pac file, or to configure manually the proxy settings.
    Therefore, the internet through TC doesn't work!
    Anyone knows a solution?
    Thanks

    The blurb about Time Capsule not being compatible with some ISPs is no different from the same blurb that Apple has attached to the specs of all previous Airport base station products. So... if your ISP currently works with an older model Base Station, it will work with Time Capsule. ISPs that typically don't work are ones that use uncommon DSL communications or authentication protocols - often found in parts of Europe and the Middle East.
    (Speculation on my part) Time Capsule will not function as a wireless client on an existing wireless network. Therefore, users of an existing wireless network will need to either (a) replace their existing wireless router with Time Capsule or (b) cable Time Capsule to their existing wireless router and disable the router built into Time Capsule. These are exactly the same options faced by previous purchasers of Apple's Airport base stations.

  • 2nd Time Capsule - What to do with it?

    Hi All,
    I have 2 Time Capsules, both 2TB. One new design, one old.
    For backup I only need one of them, so I wonder what to do with the second one. Setup as a Network drive?
    In addition I have an MBP Mid 09, ATV3 and Iphone, if this produces any additional ideas.
    I might just sell one of them, but maybe there is a usage I haven´t thought of yet, so please share your ideas.
    Thanks
    V

    Off hand.....a few options
    Use the second Time Capsule to extend a wireless network wirelessly, providing more wireless signal coverage to a remote area. The Time Capsule could still be used for backups or storage if you want in this type of setup.
    Connect the second Time Capsule to the first using a spare Ethernet cable and set up dual Time Machine backups. Time Machine will alternate back ups between the two Time Capsules automatically. So, you will have two sets of Time Machine backups in case one drive fails.
    You could also use wireless for Time Machine backups as in the first example. Your remote Time Capsule is hidden.....unfortunately a robbery occurs and your main Time Capsule is stolen along with other equipment. You still have your backups on the remote Time Capsule that you can use to restore your data.
    Some of us who are concerned about the possibility of losing our data also keep a separate backup offsite. You never know. Fires and floods do occur.
    Or, if you have no worries about loss of data on the first Time Capsule, use the second Time Capsule as an extra storage drive for data that you want to share to other users over the network.
    If none of these ideas sound useful, and you are sure that you might not ever need a second backup....in case the first TC fails......and you really don't need the second Time Capsule, I would be happy to take if off your hands at no charge.

  • Can I use Time Capsule for Time Machine and a place to put my iPhoto Library

    Can I use Time Capsule for Time Machine and a place to put my iPhoto Library?

    Only if you partition the Time Capsure into two partitions, one for TM and one for the iPhoto LIbrary.  But you won't be able to backup that library as it will be on the same drive as the TM backups.
    It's not recommended.  An alternative solution is to get another EHD, move the library to it and run it from there. Then TM can backup both your boot drive and the working EHD drive.
    OT

  • HT1178 Can i install the time capsule fixed on the wall, using  it stretched

    Can i install the time capsule fixed on the wall, using  it stretched?

    Not sure what you mean by "stretched", but the Time Capsule can certainly be wall mounted. Apple sells the wall mounting brackets:
    http://store.apple.com/us_smb_78313/product/TV675LL/A

  • I cannot copy files to my time capsule.  How do you use it as an external drive?

    I recently moved to an iMac.  I bought the time capsule as a backup drive.  I want to copy my pictures from an external drive to my time capsule.  But, it will not allow me to copy files over.  I would also like to use the time capsule for general storage for large files.  There must be a setting I am missing that allows you to simply copy files.

    So, I was already connected - I was trying to copy entire folders directly to the time capsule - I guess you "MUST" use the "DATA" folder that is created in time capsule.  I was assuming the "DATA" folder was for backups - but, appears it is for the external HD usage.
    Thanks Casper!!

  • Is Time Capsule 1st gen compatible with 3To HDD?

    hello community,
    I would like to replace the HDD 1To in my Time Capsule 1st gen (2008) with a 3To HDD. Is it compatible?  How to install, update software necessary and how to do it?
    Thanks for any hlep.
    Rolgui

    If it's nonsense to tell me, don't tell me anything else.
    In Apple Store Time Capsule version 4 has a 3GB hard drive. And for an electronics technician like me, this is not a problem to do this work.
    Time Capsule - 3TB
    Back up a lifetime's worth of memories with Time Capsule, a wireless hard drive that works seamlessly with Time Machine in Mac OS X Leopard and Snow Leopard. It’s also a full-featured 802.11n Wi-Fi base station with simultaneous dual-band support. Choose from 2TB and 3TB models.1
    Time Capsule - 3 TB
    In Switzerland
    Expédition : sous 24h
    Livraison gratuite
    CHF 529.00
    In USA
    Ships: Within 24 hours
    Free Shipping
    $499.00

Maybe you are looking for

  • Ipod cutting off songs. itunes plays songs just fine. not using "match."

    ipod cutting off songs. itunes plays songs just fine. not using "match." reformatted ipod, resynced, same problem. help!

  • Mkdir creating packages, not folders [in Terminal]

    For a while now, I've been using this terminal command to create folders based on a list in a text file. It's worked well, including in Yosemite. cat dirlist.txt | xargs mkdir An example of the dirlist.txt file would be this: abc.jpg def.jpg ghi.jpg

  • Task.cancel() throw exception

    Hi, I'm new to JavaFx and recently try out example on javafx.concurrent.Task: Example is from a book: The following is the model class private static class Model {         public Worker<String> worker;         public AtomicBoolean shouldThrow = new A

  • Adding new contact initiates Facetime?

    Today, I sent an MMS vCard to two cell phone numbers. Later, I went back to that text message and selected one of the phone numbers. Tapping on it brought me to the screen where I can choose to call that number, add it as a new contact, etc. When I t

  • Nokia n900 messaging problems

    hhey guys, i have dropped my nokia n900 a few times, and now when i receive a text mssage i cant view it and when i can, it doesnt save to conversations, so i cant see my mssages with other people, its really annoying me, please help ?