Time capsule problems - please help...

Hi. Have got a new 3 tb capsule and after I've set it up it appears they it works as a switch, not as a router... Could please anyone help me set it up as router please...? :/

It should be working as a switch if you plugged it into a router..
You do not want the TC to be a router if it is plugged into a router causing double NAT issues.. or worse failing because it has same IP as WAN side.
The setup is via the airport utility.. click the TC, click edit and go to the network tab.. there are three options,
Off bridge mode is likely what it is now..
DHCP and NAT is router.
DCHP only is not used for normal setup.

Similar Messages

  • Time capsule problem  please help

    Hi People its my first post i hope its in the right section.
    Ok
    I have a NETGEAR RangeMax Dual Band Wireless-N DSL Gateway DGND3300 Wireless route.
    i was told i can extend the range with apple time capsule.
    i tried to set up time capsule this morning my steps were
    airport un
    found apple time capsule join wireless network all setup
    i then went to update the settings and i got message saying update complete waiting for restart
    the time capsule was stuck on amber flashing on and off and would not pick up any signal
    i have now set it up plugged into router but it don't boost my signal
    Does anyone know if i can set it up using wireless mode which will work and boost my signal
    at the mo it feels like a waste of money
    please help

    also at the moment i have plugged tc into netgear and created a new network.
    is that the best way,
    If you configure the Time Capsule as a "bridge" to use exactly the same wireless network name, security and password as the wireless on your main router, you will in effect, extend the wireless network that way. Computers will be able to move from one area to another without having to change networks.
    I assume that you have an ethernet cable connecting your main router to the WAN port (circle icon) on the Time Capsule.
    Open AirPort Utility and click Manual Setup
    Click the Wireless tab below the icons
    Wireless Mode = Create a wireless network
    Wireless Network Name = Exact same name as your main router network
    Radio Mode = Automatic
    Channel = Automatic
    Wireless Security = Exact same setting that your main router is using. You may need to check the configuration pages for your main router to get this information. If the settings do not match exactly, the wireless network will not perform as a single network, it will perform as two separate networks
    Wireless Password = Same password as your main router
    Confirm Password
    Click the Internet icon
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Update to save settings.

  • Time capsule problems - please help! Disk errors.

    I bought a 500gb TC after a data loss scare and it has been ticking along doing its thing happily for a couple of months. I have it connected to my router and my iMac and Macbook backup to it wirelessly.
    Today the backup of my macbook failed (my iMac is with apple having the lcd replaced, so isn't being backed up).
    Initially the message was that the disk could not be mounted. But now has changed to a warning that the disk repair has failed and the disk has limited access and I should back up my data and reformat!
    I can view the sparsebundle files, but don't have any way of getting them off TC as the files are too large - so backing up is going to be tricky (and involved buying another HD I imagine).
    Is there any way of telling if the TC is fried or if it is some kind of setup/software error?
    Does anybody have any tips? Isn't TC supposed to be 'server grade'?

    Thanks for the reply.
    I have tried that (read a post on here suggesting it) and it still won't backup. I haven't changed any passwords.
    The only thing which has changed is that my iMac has temporarily been taken off my network while it is being repaired.

  • Time Machine Problem, Please Help.

    Hi, I have a new MacBook Air and TM just doesn't work. I keep getting the "backup volume cannot be found" error message. I've trashed the preference file in Library, quit TM, restart again, and repaired permission to no avail. I have also reinstalled the OS and the same problem persists. I've tried on 3 external drives (Time Capsule wirelessly, WD MyBook connected via USB and a Lacie portable drive connected via USB) and TM fails to backup every time. I've searched this board and other Mac fora and found no solution to my specific problem. Any help or suggestions would be greatly appreciated.

    HiDef Jules wrote:
    Hi there,
    Today I installed a little program to convert flac audio files to mp3. When I ran the program the computer froze, so I rebooted but then I could move the cursor but not click on any menus or icons on the desktop, they just wouldnt respond - so basically I couldnt use the computer. After re-booting a few times with the same result I decided to reinstall the system using time machine from an external hard drive. I reinstalled OSX, then reinstalled Snow Leopard, then reinstalled the system from a previous save from Time Machine.
    how exactly did you reinstall the system from TM? please give details. the correct way to do it is to boot from the snow leopard DVD and use the "restore system from backup" utility in the Utilities menu. there is no need to reinstall anything prior to using that utility. the restore utility wipes your hard drive and restores it to the state it was in at the backup time.
    It said the installation was successful, but when the computer restarted a message comes up saying "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again". Ive done this about 5 times now but it always just says the same message without starting properly. WHAT DO I DO???? I really need to use my computer tomorrow so any help is hugely appreciated!!! TIA
    PS. i have done a hardware test in "loop mode" and it says everything is fine

  • Can't Connect to My Time Capsule Backups, Please Help!!!

    I have been using Time Machine/Time Capsule to back my data up for over a year. I bought a new MacBook Pro this morning. I did not want to use Migration Assistant to transfer everything over because there were many bugs and corruptions on my old disk and was scared that would all be transferred to my new machine. It was time for a fresh start.
    I set up my new computer and transferred most of the files I needed via a flash drive. I am now trying to set up my MacBook Pro to connect to my Time Capsule backup disk via Time Machine, but once I enter Time Machine it does not allow me to go "back in time" to see all of my previous backups and restore points. There are some really important files I am trying to get to, but this computer isnt connecting to the Time Capsule backups. The old computer has already been completely reformatted, but it is still able to access the Time Capsule backups.
    I have done some internet research and learned that Time Machine uses a computer's ethernet MAC address to allow access. There are some codes posted on various websites that allow to alter what Time Machine thinks you MAC address is so that you can access your backups with a new computer/different logic board. None of these Terminal workarounds worked for me. The Genius Bar and Apple Care couldn't help either.
    I am hoping somebody can help me out. I understand I can use my old computer to get into Time Machine and retrieve what I need then transfer those to the new machine. But there must be a way to allow a new computer to fully access Time Capsule backups, but curiously, I can't find it. I rather have my new computer have full access because I am selling the old laptop and so I wont be able to use it to access my backups any longer.
    Sorry for the long explanation, but I hope that gives someone all the facts required to both understand what I am saying and help me fix the problem.
    -Amir

    Right now it is just empty because I have unmounted and disconnected my Time Capsule. I'm trying a low-tech work around to see if this works, but much rather do it the "right way."
    What I am doing is this:
    (1) Use Migration Assistant to copy everything from the Time Capsule to the new machine (this is exactly what I was trying to avoid initially). Migration Assistant has been copying files for about 5 hours now (still not sure what is going to happen).
    (2) Create a full backup on Time Capsule with my MacBook Pro now that it has everything from the Time Capsule on it.
    (3) Do a fresh install of Snow Leopard.
    (4) Hopefully, have the fresh start on my machine I wanted, but still have access to at least one archived copy of my old computer and files/folders.
    Does this make sense? Basically, the new machine does not allow me to access the old backups. So I am handicapping the machine now by reverting to my old settings via Migration Assistant, will back that up, then start all over from scratch again but hopefully have the peace of mind that my files are not gone because I will at least have that one copy of all my old copies in a Time Capsule backup that the new machine can access.

  • Slow shutdown after installing time capsule. Please help

    Hi everyone,
    I'm experiencing some troubles when restarting or shutting down my iMac Intel 8gb RAM late 2010. It takes longer than usual ( before I buy my 4th gen. Time capsule it Was very quick) and now, after I installed it I can see the grey spinning wheel and a geey blank screen for several seconds before it goes off.
    Things I already tried
    .  reparing permissions from Lion recovery  mode (some of them can not be repaired. I already tried almost everything)
    . Onyx all maintenance options passed.
    . Disabled time machine
    . Deleted home folder preferences from terminal (revia reset password )
    My iMac Is running Lion 10.7.2
    I've configured my time capsule in bridge mode, with automatic backup copies
    I'm sharing Time capsule disk over wan and Internet.
    I've configured iCloud with back To my Mac, documents and the rest of options
    Please, I need some help¡. Can you help me?
    Thanks in advance,
    C. Llerandi

    Try doing a Safe Mode reboot by holding down the Shift key when you hear the start-up tone. When the progress bar appears you can release the key. A Safe Reboot will clear some of the caches, it's possible one became corrupt. If that doesn't work do both a SMC and PRAM reset, you may need to do each 2-3x.
    SMC RESET
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    PRAM RESET
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Time Capsule Issues: Please Help

    my set up:
    1 extreme base station|2 expresses| 1 time capsule| comcast ISP| time capsule is setup to join the excisting network...i know apple does not recommend this but it is my only option....
    issue: it was working fine for about a week...now time capsule keeps loosing connection...light stays green however...unplugging and plugging back in it works for a few minutes...then drops out again....

    well the situation has gotten worse after the update. After updating i was hoping some of my issues may have been resolved...they were not in fact they are worse....
    so i restarted the TC so that i could see in the utility for those few minutes i have access to it...it updated and restarted..but never really restarted...it just blinks yellow now..
    so i pressed the little reset button in the back...went to factory default..and i set it up agian...the same way i had it...and now it says the TC has been updated and it is restarting it never comes back up...
    i am extremely frustrated...this is by far my worst apple product experience...wait times for TC support by phone are over 30 mins each time....and two of the three techs i have talked to were practically ********...i know its not the ones for fault for barely speaking english...but come on..you should still know how to trouble shoot for god's s

  • Time Machine Problems - Please Help!

    I am fairly new to the world of Mac's, purchasing my first in late November 2010 and i have recently been investigating Apples own Time Machine software as a means of backing up my Mac. I had an Iomega 1TB Home Media Network drive which i had connected via ethernet to my router and my Mac was on wireless. When Time Machine saw the network drive it refused to back up to it and then occasionally it didn't see it at all. I then decided to use this drive just for the Windows PCs in my household and not for my Mac as i thought it may not be backing up because i have Mac backups and Windows backups on the same drive without partitioning. I have now got a Freecom Classic 3.5" 500GB hard drive connected directly to the USB in my Mac and Time Machine sees it and begins the backup. I get so far and then i receive the error "The backup was not performed because and error occurred while copying files to the backup disk" - i have installed the Time Machine buddy widget from Apple and have looked into it, this is what i get:
    Starting standard backup
    Backing up to: /Volumes/Macbook Pro Backup 1/Backups.backupdb
    Error parsing SystemMigration.log to determine source volume of system migration.
    Backup content size: 58.7 GB excluded items size: 4.9 GB for volume Macintosh HD
    No pre-backup thinning needed: 64.52 GB requested (including padding), 455.32 GB available
    Error: (-36) SrcErr:NO Copying /Applications/AlpineCrawler.app/Contents/Resources/aahh_02.aif to /Volumes/Macbook Pro Backup 1/Backups.backupdb/Macbook Pro/2011-04-12-190436.inProgress/A63BA24E-781B-4368-B837-3A4DCA67834D/Macintosh HD/Applications/AlpineCrawler.app/Contents/Resources
    Stopping backup.
    Error: (-8062) SrcErr:NO Copying /Applications/AlpineCrawler.app/Contents/Resources/aahh_02.aif to /Volumes/Macbook Pro Backup 1/Backups.backupdb/Macbook Pro/2011-04-12-190436.inProgress/A63BA24E-781B-4368-B837-3A4DCA67834D/Macintosh HD/Applications/AlpineCrawler.app/Contents/Resources
    Copied 0 files (387 KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    So the Errors are:
    Error parsing SystemMigration.log to determine source volume of system migration.
    Error: (-36) SrcErr:NO Copying /Applications/AlpineCrawler.app/Contents/Resources/aahh_02.aif to /Volumes/Macbook Pro Backup 1/Backups.backupdb/Macbook Pro/2011-04-12-190436.inProgress/A63BA24E-781B-4368-B837-3A4DCA67834D/Macintosh HD/Applications/AlpineCrawler.app/Contents/Resources
    Error: (-8062) SrcErr:NO Copying /Applications/AlpineCrawler.app/Contents/Resources/aahh_02.aif to /Volumes/Macbook Pro Backup 1/Backups.backupdb/Macbook Pro/2011-04-12-190436.inProgress/A63BA24E-781B-4368-B837-3A4DCA67834D/Macintosh HD/Applications/AlpineCrawler.app/Contents/Resources
    Copy stage failed with error:11
    Backup failed with error: 11
    I have tried everything and looked through the forums finding people with similar problems - i have tried Verifying my Internal HD, Repairing my External HD and have tried running Tech Tool Deluxe - all of which cannot find any problems. I have also tried excluding this file but Time Machine just finds the same error with the next file in alphabetical order in the folder - i should also add it is not just the folder Applications. Can someone please tell me if i am doing something wrong as this is always a possibility with my inexperience with Macs.
    Thanks for your help and sorry it's a little long winded.

    Time Machine can back up to some NAS (Network Attached Storage) devices, if they meet Apple's criteria. But there are some downsides; see the pink box in #2 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    But yes, even if it supports Time Machine, backing-up both Windoze and OSX to the same partition is unlikely to work.
    You'll have to check with Iomega about that.
    Error parsing SystemMigration.log to determine source volume of system migration.
    That's not really a problem; it just means Time Machine isn't sure whether you "migrated" your data from a different Mac.
    Error: (-36) SrcErr:NO Copying /Applications/AlpineCrawler.app/Contents/Resources/aahh_02.aif to /Volumes/Macbook Pro Backup 1/Backups.backupdb/Macbook Pro/2011-04-12-190436.inProgress/A63BA24E-781B-4368-B837-3A4DCA67834D/Macintosh HD/Applications/AlpineCrawler.app/Contents/Resources
    I have also tried excluding this file but Time Machine just finds the same error with the next file in alphabetical order in the folder - i should also add it is not just the folder Applications.
    That's the kind of thing we see when there's a problem with a file or the destination; often a bad connection. But if it's happening on every file, obviously it's something much more serious.
    Is the external HD formatted properly? See #C1 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

  • ORACLE Time Out problem - Please Help

    Hi All
    I am working on an application which needs to handle the sql error code -3113 ("end-of-file on communication channel").
    When the application (PRO C) gets a -3113 error from the database it should run a series of steps.
    To simulate this feature i shutdown the database (not the listener).
    The problem that i am facing is this.
    In some databases the SQL query returns immediately with an -3113 error when the database is down. In others it takes well over 8 minutes to return. Why is this? Cant i reduce this time?
    Regards
    David

    Hi,
    How do you shutdown the DB when you run this test ?
    Are there active sessions in the instance ?
    Paolo

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • Problem Please help me.....Let me know the area to look for it I am a DBA..

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. 
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM  MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION    CPIC (TCP/IP) on local host
    ERROR       service 'sapmsPRD' unknown
    TIME        Wed May 04 08:59:06 2005
    RELEASE     620
    COMPONENT   NI (network interface)
    VERSION     36
    RC          -3
    MODULE      ninti.c
    LINE        428
    DETAIL      NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER     1
       at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
       at SAP.Connector.SAPConnection.Open()
       at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
       at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
       at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
       at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
       System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
       System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
       SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
       SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
       SoftwareKeyUI.search.LoadRegionDetails()
       SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
       System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
       System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
       System.Web.UI.Page.RaiseChangedEvents() +115
       System.Web.UI.Page.ProcessRequestMain() +1099

    The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
    This is basically telling the requester at what port to look for the message server.
    C

  • Problem Please help me.....Let me know the area to look for it

    Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
    Server Error in '/' Application.
    Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
    Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
    Source Error:
    An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
    Stack Trace:
    [SoapException: Problem with SAP/BAPI.
    SAP.Connector.RfcCommunicationException: Connect to message server failed
    Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
    LOCATION CPIC (TCP/IP) on local host
    ERROR service 'sapmsPRD' unknown
    TIME Wed May 04 08:59:06 2005
    RELEASE 620
    COMPONENT NI (network interface)
    VERSION 36
    RC -3
    MODULE ninti.c
    LINE 428
    DETAIL NiPServToNo
    SYSTEM CALL getservbyname
    COUNTER 1
    at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
    at SAP.Connector.SAPConnection.Open()
    at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
    at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
    at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable&amp; Kpi_Regions, ZSOFT_PROD_TYPETable&amp; Prod_Type)
    at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
    System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
    System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
    SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
    SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
    SoftwareKeyUI.search.LoadRegionDetails()
    SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
    System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
    System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
    System.Web.UI.Page.RaiseChangedEvents() +115
    System.Web.UI.Page.ProcessRequestMain() +1099

    Hi
    You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
    sapmsPRD      3600/tcp
    Good luck!
    René van Es

  • P6N Lots of problems please help

    P6N Lots of problems please help
    The setup is the following:
    P4 D935 3.2gHz
    P6N Diamond MS-7320 Bios 1.3V
    Corsair XMS2-6400C4DHX
    NX8600GT-TD512EZ/D2
    Seagate Barracuda 7200 250Gb SataII 16Mb
    Akasa 460W Dual Rail
    Please help I have lots and lots of problems with lockups that can happen any time post , bios , loading vista and sometimes during OS. Some times will work ok play games etc. Already tried different combinations fitting the mem modules even tried and some pc4200 modules same problems. Spent lots of hours clocking the mems with different settings but non is stable. I am not interested in overcloking just to make it stable to start with. When is actually running is fine is more than enough for me. Already looked to lots of posts on the msi forum but… Since the cpu is old can I go back on an older bios version???? The Corsair modules have to run at 2.1V or is it possible to use them with slower setting. So confused so lost ….. please HELLPPPPP
    Any help greatly appreciated.

    please, don't buy any more unneded parts.  first find the problem then buy if no solutions available.
    One thing I find with BIOS issues is to do a full clear.
    1. disconnect the power cord from the power supply(turn switch to off if there is one.
    2. hit the power switch to clear the power out of the system.
    3. set the cmos jumper to clear and leave there if one is available.
    4. Pull the battery.
    5. carefully short out the battery connector on the motherboard to drain any power left.
    6. press the clear cmos button and hold for 30sec minimum, if you didn't have a jumper to set. 
    7. replace battery, move jumper back, plug in power cord, turn on power sipply switch.
    Now it should hopefully power up.  go into BIOS and load optimized results. hit save and exit and when it gets back to the post screen, go back into bios and set your normal MB settings(ie. set boot devices, boot order, disable sound if using sound card, etc...)
    go into your H/W Monitor section and list the CPU Vcore settings to make sure it is getting the power it needs.  I just looked it up and it's suppose to run from 1.225v - 1.325v.
    also, try your most generic ram you have with auto settings.  the faster the ram usually the more volts they need and default volts are 1.8v for ram and sometimes faster chips have issues with lower volts.
    Let me know how this works for you.
    -=Mark=-
    ps. make sure everything is unplugged from the computer you don't need.  just cpu, 1 stick of ram, and video. and of course keyboad and mouse.  Please make a signature with all your systems specs including make and model numbers.  I hate guessing at solutions and I'd hate to see you buy any more unneccessary parts because of lack of information.

  • TS4436 Iphone 4 camera worked fine for 2 years then turned all flash photos red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

    Iphone 4 camera worked fine for 2 years then all photos with flash came out as red after installed Fast Torchlight App - deletion of app did not fix camera problem - please help?

    Try This...
    Close All Open Apps...  Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430
    If no joy...
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help, thanks.

    I have a macbook pro and use BT homehub 3.  can't work out how to connect my time capsule. can anyone help?  thanks

    Just need to plug the TC in to the hub in bridge mode.. do not try and bridge the homehub.. it is not possible with the setup BT uses.
    To bridge the TC.. plug it directly into a computer by ethernet.. no other connection to the TC or the computer.
    Press and hold in reset until the front LED flashes rapidly.. about 10sec.
    Release the reset.
    Open the airport utility and setup the TC to bridge mode.
    The actual method depends on version of the OS and airport utility you use.
    This is version 5.
    Sorry I cannot post the v6 as I am on a snow leopard computer now. But you go to the network tab, and choose off bridge mode for method of connection. It will be NAT and dhcp by default.
    Then setup wireless.. you have a number of choices here.
    Either setup with the same SSID Security and password, as the homehub uses.. or a different name, and password..
    Each method works fine.. but you sometimes have issues with wireless channels.. for now leave it on auto and see what happens.. if you have issues lock down the radio channels on both devices.. use one out of the following on each, 1, 6, 11 or 13 in UK.. so say 6 on the homehub then 13 onthe TC.
    Update the TC.. unplug fromt the computer and plug it into the homehub.
    If you have other issues with the setup tell us what OS you run so we can post suitable screenshots.

Maybe you are looking for