Time capsule slow with macbook pro

Hello,
I'm using a Time Capsule 2T with a MacBook pro 2.0Ghz Intel Core i7, 8GB ram, OSX 10.9.2.
I have a 10mbps internet plan and it works perfectly with my iphone or ipad mini using the wireless signal.
But with my macbook pro, the speed goes down to 1mbps, at maximum...
I've reseted my modem, the Time Capsule, macbook and nothing changed...
Does anyone know what could be happening?? Tks!!!

Have you tested with ethernet? From the specs of your machine it should still have ethernet port.
That is the first test.. with wireless off.. as it helps to establish if the issue is just wireless or is some network problem. If it is still slow post back without doing anything else.
Next test.. copy a file to the TC.. use a big file, a system update or some such.. copy it from the computer to the TC.. and TC to the computer. What speed do you get??
That establishes if the problem is wireless overall or is it wrongly setup somehow.
Test with wireless should be about 3-5M from the TC.. no need to be right next to it.
Make sure ipv6 is set to link-local in wireless setting on the computer.
Do the wireless diagnostics, which is built into the OS. See http://support.apple.com/kb/HT5606
Follow all the wifi best practice.
No luck post back your test results.

Similar Messages

Time Capsule works with MacBook Pro (Mavericks) but not with IOS devices? recent problem starting March 1, 2015.

I have a Time Capsule version 7.7.3 (model A1470) which has worked fine for almost 2 years with all devices, Apple and otherwise. As of beginning of this month, March 2015 - no longer works with a new IPAD mini 3 and 6-month old iPhone 6 (both updated as of last night) BUT still works fine with MacBook Pro (Mavericks 10.9.5) and Epson printer XP-600.
On both IOS devices Airport Utility shows the Time Capsule and shows green light connection to internet, but never does the connection. The little status circle just keeps going round and never shows the Wifi rainbow symbol. both devices work fine on other Wifi's. Airport Utility on iPhone actually connects enough to check on Airport base station's firmware 7.7.3 and says it is up to date! but sadly stays on LTE.
Have tried resetting, replugging etc...
Also, tried checking on updates. Nothing shows in Airport Utility. When I try to go to see past updates ~/Library/Application Support/Apple/AirPort/Firmware to see if updated, there is no Airport in the Apple folder?
A mystery...

Reset the TC to factory and redo the setup. see details below.
Here is the typical list of things you should try.. and if this doesn't help post again.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer or perhaps it is better using iOS on the phone or ipad currently having issues.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. For iOS the fixed channels particularly for 2.4ghz has helped.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place makes for poor networking. If the TC is main router it will not be an issue. This is a problem for a TC in bridge mode.
If this is of no help.. what modem do you have? What function other than modem does it have.. ie none or router??
How is the TC connected into the network? What function does it have? Router or bridge for example.
Post a few screenshots of the setup.

Airport/Time Capsule - Slow via macbook pro wifi but fast via wired iMac

My wired imac that connects to the time capsule reads about 17mbs. But when I do the speed test that is connected wirelessly it runs at 2mbs. does anybody have any clue on what I am doing wrong? or why the speeds are so slow via my macbook?

KenRN wrote:
does anybody have any clue on what I am doing wrong?
i'm not sure you're doing anything wrong. for starters, a hardwired (gigabit 1000 mbps) connection is way faster than wireless-N (at best 300 mbps).
you could try if changing the channel your wireless network is broadcasting on brings about a bump in speed. you might be suffering from _*wireless interference*_.
perhaps one of your neighbor's wireless networks is interfering with yours. download iStumbler and note the channels of the other networks in your vicinity. select a channel that is as far away from those as possible.
JGG

HT1176 Initial Time Capsule backup on MacBook Pro that doesn't have an Ethernet port

I just got a 3TB time capsule and am trying to backup my MacBook Pro. The initial process is very slow, but my MacBook doesn't have an Ethernet port. How can I connect the time capsule to the MacBook Pro to make the initial backup go more quickly?

A very good investment to make would be......
Apple USB Ethernet Adapter - Apple Store for Business (U.S.)
Why Apple chose to leave off the most important port in networking is a mystery.

Como accedo de mi mini iPad el disco duro de mi time capsule? Mi Macbook pro no enciende.

Como accedo desde mi iPad el disco del time capsule? Mi Macbook Pro no enciende y necesito accesar el disco del time capsule desde mi iPad.

Hi I was using disk utility, right now my mac cannot read any internal drive even the original, I test both drives the original hd and the ssd. So I took the mac with a technician to try to fix it, he said that the flex sata cable is bad, so I am going to replace it, unfortunately he does not have it in stock as soon as I get it I will try to use the ssd, I know that is working right now I am using it in the USB port.
Why do you think sata III is not the problem?
Thanks.

HT3275 Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?

Has anyone encountered this message on their time capsule/machine? Time Machine couldn't complete the backup because the backup disk image"/Volumes/Patti's Time Capsule/Patti's MacBook Pro.sparsebundle" is already in use"?

If you reboot the computer it should fix the problem. Also see the first link under More Like This to the right of this page:
I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion

Time Machine back-up (via a Time Capsule) on a MacBook Pro

Can I create a Time Machine back-up (via a Time Capsule) on a MacBook Pro using Snow Leopard as the OS and then upgrade my OS to Mountain Lion (a few days later) to continue using Time Machine?

then upgrade my OS to Mountain Lion (a few days later) to continue using Time Machine?
I am not sure what you mean by "to continue"
You can continue.. but upgrading is not required "to continue"
Often you will have issues though. It will create a very large backup, due to the new OS. And going back to Snow Leopard might become impossible.
I think personally it is better to have a backup of your machine before upgrade .. and keep it separate to later backup after the upgrade.
You can also do a disk image of the computer running SL to external drive just using free edition of superduper or even disk utility.
Upgrade installs are never as good as a clean install btw.. !!

Migration Problems with Time Capsule and New MacBook Pro

Hopefully someone on here can help with with this problem I'm having. I just bought the new 13' MacBook Pro this week from the store and I no longer have my old MacBook Pro. I have a Time Capsule with complete backups of my old MacBook Pro and I also have the internal hard drive from it as well.
I had installed the beta version of Mountain Lion on the old MacBook Pro and the new one still has Lion.
The problem is that every time I have tried to use the Migration Assistant (and I've tried 3 times now) my files and applications are getting messed up.
iPhoto won't open. It says that it needs to be updated but when I check to update it it says that there is no update needed.
I'm seriously about to beat my head against the wall because every time I migrate the data it takes about 12 hours. I'm thinking at this point that it might be easier for me to just swap out the internal hard drives in the units because it is possibly an issue with the OS' and wait until next month to try migrating to the new drive again after Mountain Lion is officially launched.

Bob,
I appreciate your honest and prompt response. I was VERY SPECIFIC when I told the sales rep I was hoping to use the Time Capsule with two different MacBook Pro's on different subnets (one is behind a firewall on a router, one is directly connect to a WAN side IP with no firewall) and the sales rep made a point of saying that the dual band feature would facilitate this connectivity which left me with the impression (obviously wrong) that the WiFi features of the time capsule could be used to communicate with multiple Macs regardless of their own networking configurations. (I have been configuring fairly complicated networks for 20 years and only bought my first Mac two and a half years ago; the second Mac is only six months old; the third will be bought next month.)
This isn't the end of the world for me... it does require reconfiguring my network and doing a lot of port tunneling for the box outside of the firewall in order to bring it inside as well as giving up some remote access redundancies (which were based on the ability to connect to both machines using VNC software which is port specific which means that it needed separate WAN side IP addresses).
Overall I love the Mac approach compared to the nightmare that was (is) Windows (although I do also run an Ubuntu Linux box just to keep me honest). That said, your sales reps do your products a HUGE disservice when they give glib and incorrect answer to what was, I believe in my case, a very specific and precise question.
Bill Wood
Watertown, Mass.

Time Capsule crashes my MacBook Pro

Hi,
I have just got back from a shopping trip with my shiny new Time Capsule. I have it set up as my wireless base station and am connected to the net. Problem I am having is that when Time Machine starts preparing to back up my MacBook Pro crashes and will not relaunch finder so I have to hold the power button down to turn off.
Why is it doing this??? Has anyone else had this problem??? How can I get my new shiny toy to work???
Any info greatly received!

My time capsule worked great up until the May 1st update Time Capsule Update. A grey curtain comes down on the screen and a warning in several languages shows up and I have turn off my MBP. I am very frustrated with this problem and I can see I am not the only one:
http://discussions.apple.com/thread.jspa?messageID=6995068&#6995068

Canon printer into Time Capsule - works with macbook not imac - why?

Hi all,
This has been up in the iMac section for a couple of days and no one has replied. I thought I'd post it in here as people with TC's may have come across this and know how to fix it. I originally thought it was an iMac fault - perhaps it still is! Anyway I hope I've not broken any rules by posting it in here, when its already else where, if so apologies in advance.
I have both an iMac and a MacBook Pro (3 weeks old). I also have a time capsule and have plugged my Canon iP4500 into the USB port on the TC. I had, before getting the macbook, the printer printing wirelessly, with all the functionality that it should have using the airport on my iMac and the TC. Then after an upgrade of OS X, it suddenly stopped working wirelessly. I can not get it to work, no matter what I try - I've reset the printer settings in system prefs, reinstalled the drivers from the Canon web site, re-setting the TC - nothing works.
However it does work from my MacBook Pro! It has the same OS X version, the same printer drivers downloaded from the same site.
Obviously I'd like both computers to be able to print wirelessly - not sure what's going on with the iMac.
All help is very very appreciated.

I thought I'd search the hard disk and remove all files, drivers et al that I could find relating to the printer. Then reinstalled the up to date driver from the Canon website. (If I knew how / if it possible to post a screen grab of the printer window I would - so I've made a new page on my website - you can see screen grabs at: http://web.me.com/timhydes/Site/CanoniP4500_printerissues.html ).
This time the printer window pops us as per usual, then in the top half section where it shows the icon, the name of the file it should be printing, but underneath it says "No pages found!", in the status table in the bottom half it says "Printing" (see screen grab 1). If I leave it for a while, it changes the top half to "Printer Ready" and the status menu says "Stopped" (see screen grab 3).
If I click on hold, then resume I get a new window which says: "Operation Count not be completed" "client-error-not-possible" (see screen grab 2).
I've checked that there is printer ink, paper et al, and it still prints from my MacBook.
I wondered it this may shed some light on the issue from those more knowledgeable than my self.
Many Thanks
Tim

Time Machine backup with MacBook Pro 10.7.5 and Seagate Backup Plus Drive?

Anyone have any suggestions for a successful backup using Seagate Time Machine Backup Plus 1TB hard drive and 10.7.5 MacBook Pro?

Is it something like this? If so, then it's likely already formatted for use with OS X - "Mac OS Extended (Journaled)". Just connect the drive, make sure that it mounts, and turn on and setup Time Machine in System Preferences.
The first backup may take awhile, but hourly backups should be quick. Don't worry about keeping the drive plugged into your Mac all of the time - when your on battery Time Machine will make local snapshots on your internal. Just plug it up when you're ready.
For a good introduction to Time Machine, see http://pondini.org/TM/FAQ.html.
Good luck,
Clinton

What is the best method for a quick disconnect from time capsule on a Macbook Pro Retina?

Just bought a Macbook Pro Retina and want to attach Time Capsule portable disk. Do I need to go to Finder everytime I want to take my notebook and eject the harddrive?

Quote from Bob Timmons:
"Normally, the TC icon will mount on the desktop during a backup and un-mount at the conclusion of the backup. If the TC icon still happens to be on the deskop, then you would want to right-click on the icon and choose Eject, or simply drag the icon to the Trash to do the same thing."

Just plugged in Time Capsule and one MacBook Pro works fine on WiFi while the other MacBook Pro and iPad 3 keep disconnecting. Any ideas?

Additionally, the wifi icon at the top of the screen has an exclamation mark on the MacBook Pro that doesn't connect. We've tried restarting the machine, the Time Capsule but nothing has helped.

Just called Apple Support and it turns out we had the settings wrong. We're all set now!

Can I restore a memeo auto backup created in Vista on a time capsule onto a Macbook pro?

I have a pc running vista sp2 and using Memeo auto backup software but backed it up to a TimeCapsule (we also have an iMac and a Macbook Pro in the house). The pc has now developed an HDD error and I'm thinking of replacing it with a MacBook Pro but I need to recover or restore all the files (.docx; .xls and winmail files plus loads of .jpgs) to the new MacBook Pro. Does anyone know if I can do this? I'd rather not have to buy another windows based pc. I've checked on Memeo's web site and support areas but can't seem to find an answer. Thanks.

I've never personally done this, but I'm qute sure you can. After all, this would be one method of migrating from the MacBook to the MacBook Air (with the assistance of Migration Assistant).

Time Capsule backup with MacBook running on battery power.

Will time machine back up to time capsule without AC power being connected to the computer? So far I can't find an option that will let me backup just using battery power. One of TC big selling points was so laptop users could backup without wires. That is the reasons I got time capsule was so I could wirelessly backup my MacBook, but it seems I still need to have a wire connected to the computer. So if you need to have the power cord what is the big deal of a wireless backup? I have searched the topics and no one seems to have even hinted at this question.

That's strange, it allows me to back up manually. What's the charge level of your battery when you requested the backup? Could be a safeguard to prevent failed backups if the battery level's too low...
And for your original post, I'm sorry but I have to disagree. While you are still technically wired to the power outlet, you don't have to be wired to your Time Capsule or an external hard drive. You can, for example, be in your living room next to an outlet and be backing up to your drive in your computer room. Much more convenient IMO.

Time capsule slow with macbook pro

Similar Messages

Maybe you are looking for