Time Capsule Slow WLAN to internal disk with internet data transfers

All,
I've been experiencing slow responses from my Time Capsule since I got it. It is one of the newer models with dual band and I have a Macbook Pro and a Macbook connecting to the 802.11n network.
I use the internal disk of the Time Capsule as a NAS and I don't use it for Time Machine backups. It houses software, pictures and music files.
When I'm downloading files from the internet via Safari, or via Transmission (torrents) the wifi throughput of the WLAN slows down from about 5 megabytes per second to just a couple of hundred kilobytes per second.
For my tests I used a 2.2Gb DMG file (a Garageband Jampack) which was housed on the Time Capsule disk.
With Transmission running and downloading two torrents and seeding two torrents (capped upload of 2 kilobytes per second), the transfer of the file from the Time Capsule was 4 hours. I let it run a few hours just to determine that the ETA in Finder was fairly accurate.
With Transmission stopped, the transfer of the same file took 9 minutes.
With Transmission stopped but with Safari downloading a large file (400mb), the local Time Capsule file download to my Mac was again looking at around 4 hours.
It also impacts file uploads to the Time Capsule disk but no where near as badly as with downloads. According to activity monitor, throughput from the Time Capsule disk to my Mac over Wifi is around 200 kilobytes per seconds, writing to the Time Capsule was around 900 kilobytes per second.
Both upload and download speed increases dramatically when no internet based file transfers are taking place.
Now the odd thing. I have a TVIX 6500a media player attached to the Time Capsule via gigabit ethernet. In all the tests I've performed (using the same DMG file) the data transfer rate, both reading and writing to the TVIX has always been solid at nearly 5 megabytes per second.
It is almost like the Time Capsule prefers internet originated traffic over WLAN traffic to its own internal disk, and really throttles this traffic. And it lets traffic originating from other devices on the network through on all cylinders.
I know technically a Time Capsule is designed for Time Machine however I can't see how it would be a viable solution given the bad data rates when downloads are taking place.
Is there any way to get under the hood of a Time Capsule to make some adjustments? I wonder if anyone else has had any experience with this, and what might happen if I plug in a USB disk and use that instead. It is starting to look like I might have to get a decent NAS to connect to the Time Capsule but then it is just a larger heavier Airport Extreme.
Thanks in advance.

Mikecad1 -
I dont have any assistance to offer, but have experienced similar problems.
When trying to offload all my music from an external drive to a Time Capsule, it was estimating WEEKS to do it. Even with the HD connected right to the Time Capsule. It's like the WLAN wanted all traffic to go out then come back in before being written.
My solution in that case was to disconnect my laptop from the WLAN, with the drive hooked up to it via USB and then Cat5 to the Time Capsule and do a direct transfer like that. 2 hours instead of weeks.

Similar Messages

Use of Time Capsule as a back up disk with USB cable

I want to speed up my Time Machine backups by connecting my Time Capsule (1st gen) directly to my iMac (mid-2011) using a USB cable.
Please note I do not want to use my Time Capsule as a router (as I have a new one) and I don't want to run an Ethernet cable between the new router and the Time Capsule either since they are in different rooms.
Will this work? Will the iMac communicate with the Time Capsule over a USB cable?

No.. it won't work.. the TC is now and always a network drive. Buy a USB disk if that is what you want.. sell off the TC on ebay or craiglist etc.

HT3275 I am received an error on my Time Capsule which states the backup disk image "Volumes/Data/MacBook Pro. sparse bundle? is already in use. so time machine couldn't complete the backup to time capsule - any suggestion

I've received an error message Time Machine couldn't complete the backup to Time Capsule, the backup disk image /Volumes/Date/....MacBook Pro.sparsebundle" is already in use. Any suggestions as to what I can do to fix it?

I've got mine working again by deleting a partial backup that was on the Time Capsule.
I mounted the backup sparsebundle, and then browsed the content and found a filestucture named <timstamp>.inProgress. I removed that and the followed the tip to disconnect described above. That did the trick for me.

My mac can't find the volume" Data" on Time Capsule. Also Ican't find with the disk utility program the hard disk in the Time Capule; so I can't format the disk again. What can I do?

My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
So I can't format the disk in the Time Capsule
Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
What can I do?
Joe

I listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
In finder use top menu, go, connect to server.
Type in the following.
AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
If that fails..
try
SMB://TCname
Here is the screenshot.
tardis4 being the name of my TC.
It should then ask you for your credentials.
And it should remember them in the keychain and be able to then get TM to connect.

Configuring the time capsule airport wlan function as "connect to wlan", the time caspule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport Express it worked!

Configuring the time capsule airport wlan function as "connect to wlan", the time capsule gets a correct IP adress from the other wlans IP range, but does not assign this to the ethernet ports. With Airport express it worked, the single Ethernet port got the IP Parameters passed through!
My setup is a Vodafon Esaybox connected to ISP. Time Capsule is not able to extend the wlan of the easybox, neither airport express can do.
Only the option "connect to wlan" is succesful.
With airport express I was able to connect my Sony Bravia TV to the lan via ethernet to stream pictures, the TV set got an IP adress from the easybox.
With the time capsule the easybox dosn't find devices connected to the ethernet ports to submit IP adresses. The TV set get another IP adress (169.xxx.x.x.) in subnet mask 255.255.0.0 and I don not now where from.
My notebook is a MacBook pro.
Any idea????
Thank a lot in advance!
Kind regards
Ingo

Neverthe less, could there be the chance, that this feature could be implemnented with an firmware update?
That would appear to be a question for Apple to answer. You can make suggestions to Apple here:
Apple - AirPort Extreme - Feedback
If the AirPort Extreme and Time Capsule are configured to "extend a wireless network" they will provide additional wireless coverage....and...the Ethernet ports are enabled in this type of setup.
The "catch" here is that you must have an Apple router providing the network to be extended.

Time Capsule slow in Lion and errors

hello --
ever since upgrading to lion i am having a lot of problems with my time capsule. it is running extremely slow, while before it was perfectly acceptable over wifi. eventually i installed the time capsule buddy widget and noticed the error below repeatedly occuring (in bold). i also noticed that all of a sudden it requires 1.89 GB to backup ( !!! ) in the last line, something that never was an issue before. have others encountered similar issues?
thank you in advance.
p.
Starting standard backup
Attempting to mount network destination URL: afp://Patrick%[email protected]/Storage
Mounted network destination at mountpoint: /Volumes/Storage using URL: afp://Patrick%[email protected]/Storage
Renaming /Volumes/Storage/MacBook Pro i7.sparsebundle to /Volumes/Storage/Macbook Pro i7.sparsebundle
Failed to move /Volumes/Storage/MacBook Pro i7.sparsebundle to file://localhost/Volumes/Storage/Macbook%20Pro%20i7.sparsebundle/ error Error Domain=NSCocoaErrorDomain Code=516 "“MacBook Pro i7” couldn’t be moved to “Storage” because an item with the same name already exists." UserInfo=0x7fb5e32179a0 {NSUserStringVariant=(
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Storage/MacBook Pro i7.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
1.89 GB required (including padding), 397.55 GB available

A: Time Capsule slow in Lion and errors

Same problem here - slow backing up to my Time Capsule. Today I had some trouble after booting my MacBook Pro. Finder got stuck and after some restarts Spotlight re-indexed and everything seems fine. And now backing up is much faster. I used to have a lot of time waiting for indexing. But I still get this error message:
2012-08-26 21:51:49,984 com.apple.backupd: Failed to move /Volumes/Data/Pärs MacBook Pro 111026.sparsebundle to file://localhost/Volumes/Data/P%C3%A4rs%20MacBook%20Pro%20111026.sparsebundle/ error Error Domain=NSCocoaErrorDomain Code=516 "“Pärs MacBook Pro 111026” couldn’t be moved to “Data” because an item with the same name already exists." UserInfo=0x7fb8c050fac0 {NSUserStringVariant=(
Move
), NSDestinationFilePath=/Volumes/Data/Pärs MacBook Pro 111026.sparsebundle, NSFilePath=/Volumes/Data/Pärs MacBook Pro 111026.sparsebundle, NSUnderlyingError=0x7fb8c050fee0 "The operation couldn’t be completed. File exists"}
But it seems that everything is working fine. It's backing up and I am able to restore files via Time Machine.
Should I worry?
Any clues?

TS1550 What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine

What about when using the "Time Capsule" HD as the external disk, especially when it is connected by ethernet cable? I'm having trouble getting it to work at all. Don't need it to work as anything else, other than a ethernet connected Time Machine backup. Already have a wireless network that works fine so no need to mess with it. We get the internet via cable company and their modem is upstairs and the Time Capsule is downstairs in the basement. The latest error message was about it could not backup as it was already in use (should have written it down before clicking OK and moving on.

See if this helps...
http://pondini.org/TM/C12.html

Time Capsule: Port Forwarding Issue and DHCP with Westell 6100g Modem

Ok two issues as of right now, but more down the road i think... Anyways, number one, i would like to be able to backup my computer using time machine and my time capsule.. Right now it works properly when inside the local network, was wondering if there was a way to backup when outside the network... i travel a lot and always have my macbook pro with me.. Also, i have a USB hard drive connected to the usb port on back of time capsule but its not showing up anywhere... is that only for printers??? that's not such a big deal, but would be nice to have access to that hard drive from multiple computers... OK so part two of my issues is, i have a WESTELL 6100g modem for DSL verizon service, which is crappy, but that's besides the point, it is a modem/router, so i have the time capsule connected directly to that westell.. the westell only has one Ethernet port, so that's wired to time capsule and then my computers are connected wirelessly and wired through the capsule. It seems that the westell is distributing the IP's and is controlling the port forwarding and what not.. I have tried a few things to give control to the time capsule but that didnt work.. i followed these directions on the web page http://www.dslreports.com/faq/vz/4._Hardware#13600 but it didnt work properly, i couldn't log onto the web at all.. Maybe im doing something wrong.... Anyways, what i really want to do is control everything that the westell is controlling right now with the time capsule... i want to give out IP's and also control port forwarding with the capsule.. Any way of getting that accomplished would be AWESOME... I'm somewhat intelligent when it comes to computers so i should understand everything you are talking about... please help!!!

wattabing wrote:
Ok two issues as of right now, but more down the road i think... Anyways, number one, i would like to be able to backup my computer using time machine and my time capsule.. Right now it works properly when inside the local network, was wondering if there was a way to backup when outside the network... i travel a lot and always have my macbook pro with me.
If you have Back to my Mac (available online service from Apple's MobileMe), then you can perform the following actions with your Time Capsule remotely,
1. Remote disk access to both the Time Capsule disk and a compatible disk connected via the Time Capsule's USB ports.
2. Remote configuration.
Also, i have a USB hard drive connected to the usb port on back of time capsule but its not showing up anywhere... is that only for printers???
Printer, hub, or compatible disk.
http://support.apple.com/kb/HT2421
Anyway, it could be a setup issue for you, assuming you have Back to my Mac (MobileMe) then the procedure for Time Capsule services is shown in the following Apple support kb
http://support.apple.com/kb/HT3486
and for USB disk please see the following Apple support kb
http://support.apple.com/kb/ht2426

Will Joining Time Capsule Slow My Internet Down

Hi,
I am joining Virgin Media (100mB/S) and before I have always plugged my time capsule into my BT router and joined the time capsule.
What speeds can Time Capsule support? Will doing this with a significantly faster broadband speed be pointless and slow?
Thanks in advance.
Loic

So 125 megBytes / sec?
Thanks

How to use airport time capsule on a dell portable pc with windows 7 taking in consideration that Time machine doesn't run with Windows ?

how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme with updates thru Snow Leopard but now seems to only allow WEP encryption instead of WPA.

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule? It used to work with old Airport Extreme network, run from a intel iMac with updates thru Mavericks but now seems to only allow WEP encryption instead of WPA and can't connect to Time Capsule. Airport Extreme Base was controllable from either computer up through Snow Leopard (I didn't do any of the Lion upgrades). Then when I upgraded to Mavericks I lost the ability to use Airport Utility with this hardware on the Sunflower but could still connect wirelessly to network without any problems. But now with the Time Capsule upgrade the Sunflower is blocked from network by a dialogue that requests ony WEP password, not WPA pwd used by Time Capsule. Neither can I use the old airport extreme base to extend the time capsule network since I can't input the correct password/encryption approach to join it. Is there a work around? Would a newer but old Airport Express be able to extend network to Sunflower? Or maybe a third party wireless (such as Netgear, Dlink, etc) that has browser type control rather than special utility?
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this--so is it true now that the only access control is via WPA2 pwd now (which appears to be the encryption pwd and not the time capsule pwd)?

Is there a way to connect an old Sunflower iMac (OSX 10.4.11) to a new Time Capsule?
I can’t claim to completely grasp the issue(s) you’re describing, but the underlying problem is presumably your iMac’s obsolete AirPort card. Whatever the case, an obvious (if not particularly helpful) answer to your stated question would be to connect your iMac with an ethernet cable, using powerline adapters as an alternative if you don’t want to have wire running all over the place.
My still fully functional clamshell iBook, with an original AirPort card, connects wirelessly to my 4th Generation TC network by means of a cheap 802.11b/g/n USB Wi-Fi adapter. This might be an option for you too.
Another question--before I used MAC addresses to control who could access network. Now on Time Capsule I don't see anything about this
When you edit your TC's settings the access controls appear under the Network tab, don't they?

If I bay time capsule, I can use ma tv with smart tv and wi fi to watch my films on capsule?

No. Smart TVs can't use AFP to connect to the TC. Although, it might help to know what your smart TV actually is (i.e. model number? Make?)

Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112). How can I repair it?

Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
How can I fix it?

You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
See # C17

Time Capsule slowing speeds

Hi Out There
I am by no means a tech person but can get by, so bare with me...
Recently upgraded from an older model Airport Express to latest Time Capsule (2TB). TC is linked with a Netgear ADSL2+ modem (DM111P). There has been a marked drop off in internet speeds and it does not appear to be traffic congestion because it can be anytime, day or night. The old Airport was giving good speeds when we moved in the town but the drop off has been since installing the TC.
The TC is run wirelessly and the house size is small. Interaction between wireless devices appears to be good, only the internet speeds.
Can anyone advise if this could a configuration issue or the ISP choking speeds (I've heard that mentioned before??)
any suggestions welcome...but be polite!
Oldcol

Netgear ADSL2+ modem (DM111P).
Is the modem bridged or in router mode?
If you are not sure where are the adsl credential.. in the modem or on the TC?
Sadly the latest version of the TC can have ethernet issues, particularly on the WAN port.
If possible borrow a full modem router.. and test with the TC bridged.
Perhaps give me some numbers.. plug a computer directly to the modem. (if bridged you will need to setup pppoe client in the computer) and give me a real speed test.. then give me a speed test with the TC running.. but using ethernet to the computer. and then same test with wireless.. please test wireless with no ethernet and ethernet with wireless turned off.
We should be able to sort the origin of the problem from that.

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

Time Capsule Slow WLAN to internal disk with internet data transfers

Similar Messages

Maybe you are looking for