Time Capsule - "sparesebundle" could not be accessed. Error -1

(2) sparsebundle. "Could not be accessed (error -1) What does this mean and what should I change? Thx. for your feedback. d

Reboot the TC.. it is often a network bug.
See C17 here.
http://pondini.org/TM/Troubleshooting.html

Similar Messages

HT3275 Backup error w/ Time Capsule -- .sparsebundle could not be accessed (error -1)

I have been using Time Machine on a Time Capsule to back up my 2 MacBook Pros. Recently, the one running Lion started giving me this error: The backup disk image “/Volumes/Data/<computername>.sparsebundle” could not be accessed (error -1).

Suggest that you see # C17 in Pondini's excellent support document.....Time Machine -- Troubleshooting.....for all the steps.
http://pondini.org/TM/Troubleshooting.html

Time Machine: sparcebundle could not be accessed (error -1)

Hello!
I’ve using Time Machine with my Time Capsule for some time and out of nowhere it started giving me the following error: The backup disk image “xxx/xxx/xxx.sparcebundle”could not be accessed (error -1).
I’ve been searching weeks for a fix without success, already tried http://pondini.org/TM/Troubleshooting.html - #C17 and it didn’t help.
Also tried on my Time Capsule: unplug, reset, factory reset, erase disk, format disk, change password, and on Time Machine preferences tried to remove disk and add again…. no success, error persists.
I discovered the only way for backup to work is to I login as a test user which I created for this purpose (I’m the administrator).
Any help would be greatly appreciated. Thanks.
Here are the logs:
Backup logged in as Administrator (Backup Failed):
Starting automatic backup
Attempting to mount network destination URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -166; status: -47; dissenting pid: 0)
Waiting 60 seconds and trying again.
Network destination already mounted at: /Volumes/Data
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -166; status: -47; dissenting pid: 0)
Waiting 60 seconds and trying again.
Network destination already mounted at: /Volumes/Data
Failed to eject volume /Volumes/Data (FSVolumeRefNum: -166; status: -47; dissenting pid: 0)
Giving up after 3 retries.
Backup failed with error: 21
[SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
Failed to eject volume (null) (FSVolumeRefNum: 0; status: -35; dissenting pid: -1)
Failed to eject Time Machine disk image: /Volumes/Data/Super’s iMac.sparsebundle
Backup logged in as a test user (Backup completed successfully):
Starting automatic backup
Attempting to mount network destination URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Mounted network destination at mount point: /Volumes/Data using URL: afp://xxxx%20xxxx;AUTH=SRP@Aar._afpovertcp._tcp.local/Data
Disk image /Volumes/Data/Super’s iMac.sparsebundle mounted at: /Volumes/Time Machine Backups 2
Backing up to: /Volumes/Time Machine Backups 2/Backups.backupdb
Using file event preflight for Mac HD
Will copy (44.4 MB) from Mac HD
Using file event preflight for Dados
Will copy (Zero KB) from Dados
Found 2280 files (44.4 MB) needing backup
1.5 GB required (including padding), 752.35 GB available
Copied 7285 files (45.2 MB) from volume Mac HD.
Copied 7303 files (45.2 MB) from volume Dados.
Using file event preflight for Mac HD
Will copy (2.6 MB) from Mac HD
Found 58 files (2.6 MB) needing backup
1.59 GB required (including padding), 752.32 GB available
Copied 1122 files (4.4 MB) from volume Mac HD.
Copied 1140 files (4.4 MB) from volume Dados.
Created new backup: 2013-10-02-121637
Starting post-backup thinning
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-120751 (4.1 MB)
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-110755 (8.5 MB)
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-101239 (21.7 MB)
Deleted /Volumes/Time Machine Backups 2/Backups.backupdb/Super’s iMac/2013-10-01-004813 (1.3 MB)
Post-back up thinning complete: 4 expired backups removed
Backup completed successfully.
Ejected Time Machine disk image: /Volumes/Data/Super’s iMac.sparsebundle
Ejected Time Machine network volume.

Please read this whole message before doing anything.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}Lib*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of login items' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Time Machine, sparsebundle could not be accessed (error -1)

Hi there,
I keep getting the following message:
Time Machine could not complete the backup.
The backup disk image "/Volumes/ Time Cap Backup/iMac.sparsebundle" could not be accessed (error -1)
Could anyone...PLEASE....tell me how to fix this. And what's the difference between error 119 and error -1
Thanks a million
Best regards,
Tonny (from The Netherlands)

Hi
I had the same problem.
Then, because the problem happened each time I restarted my Imac, I tried to check the apps starting at login.
I went to system preferences - users - login items and I looked at some "apps starting automatically at login",
In my case I deleted "WD Macintosh + Turbo drivers" (an old version incompatible with 10.7.2) and I resolved the problem.
I hope I've been helpuf

Error Message is The backup disk image "/Volumes/Time Capsule/Dave Kuhl's iMac.sparsebundle" could not be accessed (error -1).

I got the error message that my Time Capsule "iMac.sparsebundle could not be accessed (error - 1). It backed up fine yesterday. Anyone else have this problem?

If it helps I am getting the same message, I have reported it to Apple and they have someone working on it. Mine stopped backing up after having a new hard drive installed. I can however back up to the same time capsule from my laptop.

I get an error mess when trying to complete backup "The backup disk image "/Volumes Time Capsul MacBook Pro.sparsebundle" could not be accessed (error -1).

When trying to use my time machine got an error message "Time Machine could not complete the backup.
The backup disk image “/Volumes/ Time Capsul/ MacBook Pro.sparsebundle” could not be accessed (error -1).
Any ideas?

I have not found a long-term solution (fix), but in my case the volume where the Time Machine backup should occur usually is mounted on the desktop but not as a shared volume (incidated as a drive with the people holding hands superimposed over the drive icon). If I drag the drive to the trash (unmount it), the next time Time Machine is scheduled to run, it completes successfully.

I keep getting the message "The backup disk image "/Volumes/Donald Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html

Time Capsul/MacBookPro.sparsebundle" could not be accessed (error -1).

Good Day!
So, I have this problem: Time Capsule says MacBookPro.sparsebundle cannot be accessed (error -01). I have no idea why not, because I am able to access it. See, here are the contents:
Has anyone here dealt successfully with this error? If worse comes to worst, I have not qualms about resetting my Time Capsule.
Thanks in advance for any information you can give me.
~~Kate

See Time Machine - Troubleshooting C17. . . . sparse bundle could not be accessed (error -1)

Time Capsule Help: The backup disk image "XYZ.sparsebundle" could not be accessed (error -1).

My time capsule hasn't been working for months now. Finally got around to looking into the problem. Have tried looking on forums -- most solutions point to Pondini.org. I've tried #17, which is related to my specific error with no avail (including using Airport Utility 5.6 to disconnect all users).
I have also tried moving (instead of deleting) my old sparsebundle into a temporary folder on the Time Capsule to "hide it" to attempt to create a new sparsebundle: while I have managed to get Time Machine to create a new one (albeit after many, many attempts), once it creates a new one, it doesn't seem to say that anything has been backed-up AND it cannot seem to access the "new" sparsebundle, giving me the error: "The backup disk image “XYZ.sparsebundle” could not be accessed (error -1)."
Thoughts?

Try Here > http://pondini.org/TM/C12.html
More Info here > http://pondini.org/TM/Time_Capsule.html

Time Machine gives error "The backup disk image '/Volumes/time capsule name/Macbook Pro.sparsebundle' could not be accessed (error -1)."

The backup disk image ... could not be accessed (error -1).

Thanks to the great Pondini...
http://pondini.org/TM/C17.html

HT1218 ?My time machine could not complete back up. Says backup disk image"/volumes/data/name's iMac.sparsebundle" could not be accessed error 1??

Time Machine could not complete the backup.
The backup disk image "/Volumes/Data/Name's iMacsparsebundle" could not be accessed (error -1 )

I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!

HT3275 The backup disk image "/Volumes/Ana M. Hernandez, DO's Time/Ana M. Hernandez, DO.sparsebundle" could not be accessed (error -1).

I am unable to complete a backup and I get this message The backup disk image “/Volumes/Ana M. Hernandez, DO's Time/Ana M. Hernandez, DO.sparsebundle” could not be accessed (error -1). I have tried to find help but I can't find it in the apple site. I'm not very techy at troubleshooting and don;t want to dlo anything that will worsen the problem without advice. Thank you.

Reboot the Time Capsule.. Lion has terrible networking issues with the TC and has simply forgotten where it is.
Check C17 for some other issues.. there is some other things that cause it. And you can do a disconnect all users if you have the right utility.
http://pondini.org/TM/Troubleshooting.html

Since upgrading to Lion, my time machine backups are failing - error message: The backup disk image "/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska's MacBook.sparsebundle" could not be accessed (error -1). Any ideas?

Since upgrading my Macbook to Lion, the time machine backups are failing - error message: "The backup disk image “/Volumes/Jackie Scanlon's Time Caps/Jacqueline Drabczynska’s MacBook.sparsebundle” could not be accessed (error -1)." I have rebooted the TIme Capsule and it worked OK, but don't want to do that every time. Any suggestions? Thanks

Any new info on this?
I had the exact same problem and went crazy and spent a hecka lot of time trying to deal with my brand new 2TB Time Capsule and almost brand new MacBook Pro. Then I thought I fixed it...and I tried SO MANY things, I don't really know what did it...except taking out any apostrophe's in names of stuff that Apple puts in there...BUT...now it's back.
Grrr...

HT3275 For the past several days, I have been getting this message during backups: Time Machine could not complete the back up. The backup disk image "Volumes/Data/iMac.sparsebundle" could not be accessed (error-1).

For the past several days, I have been getting this message during backups:
Time Machine could not complete the back up. The backup disk image "Volumes/Data/bhoppy2's iMac.sparsebundle" could not be accessed (error-1). When I click on the 'help' icon on the message, it reverts to a blank page, and I cannot find anything online regarding the term 'sparsebundle.' In addition, I cannot access previous backups any longer.
Help?

See C17 in Time Machine Troubleshooting by Time Machine guru Pondini:
http://pondini.org/TM/Troubleshooting.html

My Time Machine keeps repeating the error message "Time Machine could not complete the back- The back-up disk image "/Volumes/Data/User's iMac.sparsebundle" could not be accessed (error -1). How can I fix this?s/

My Time Machine could not complete the back-up. The error message says "The backup disk image "/Volumes/DataUser's iMac.sparsebundle" could not be accessed (error-1). How can I fix this problem?

Welcome to the Apple Support Communities
See > http://pondini.org/TM/C17.html

Time Capsule - "sparesebundle" could not be accessed. Error -1

Similar Messages

Maybe you are looking for