Time Capsule stopped broadcasting ssid

All of a sudden my ssid is no longer broadcasting from my time capsule. I rechecked the setting to make sure that the ssid was not selected to be hidden and it was not. Ive tried to change the wireless transmitting channel and still nothing. Any suggestions?

Welcome to the discussion area, UnderTheCrates!
Have you done a *complete power cycle* of the entire network? That's the first step to perform in any situation like this. If you have not already done this...
Power down everything on the network, order is not important.
Wait a moment and start the modem first, and let it run for moment by itself.
Then start the next device connected to the modem the same way.
Start other devices one at time the same way.
This may not solve your issue, but it is an important step to perform in any troubleshooting sequence.
Please post on your results.

Similar Messages

  • Tima capsule stop to work

    i've changed the name of my network and my time capsule stopped to work properly. actually time machine says "i cannot activate the image of back up disk"
    i've tryed to initialize the disk with the disck utility and now from the disck utility TM is all free (no space allocated) but Time Machine continues to try to make incremental back up and doesn't work !!! i've tryed to cancel with zeros old backups space but is too long (it takes 7 days)
    with the disk utility i've changed the name of the disk

    That's right, I can't connect after a Hard reset. I get the same message.
    " Connection Failed
    The server may not exist or it is not operational at this time. Check the server name or IP address and your network connection and try again."
    When I use a program to identify wireless networks the Time Capsule shows up.
    Would the fact that I had a different name for Time Capsule before I Hard Reset create some sort of a problem?

  • My time capsule stopped working. amber light comes on for a few seconds then turns off.

    my time capsule stopped working. When I try to power it up the amber light comes on for about 10 seconds and then turns off. That's as far as it gets. Any ideas on how to solve this problem.

    Kazandjaz, Welcome to the fourm!  There is a 99.5% chance that your problem is caused by a failed internal power supply unit (PSU)!  If you have operated it for about 18 months or so, that is the cause.  Take it to your nearest Apple dealer and ask them to check it out.

  • Backup to Time Capsule stopped due to network problem

    I have been backing up for a month or so. Now my time capsule stopped backing up. I get the following error message:
    There was a problem connecting to the server "Time-Capsule.local".
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connections, and then try again.
    Here is my setup.
    Internet comes in via an airport extreme. I extended the wireless network of the airport extreme to the Time Capsule. I try to backup my MacBook Pro (Lion 10.7) wirelessly to the Time Capsule. The Time Capsule is visible in the Airport Utility, has an IP address and I can access it without a problem. When I go to the settings for time machine I can see the Time Capsule and even select it. But then I get the above error message.
    I tried checking the network but to me everyhting looks fine. Not sure how to start trouble shooting this. Who can help?

    mikefromswiss wrote:
    I have been backing up for a month or so. Now my time capsule stopped backing up. I get the following error message:
    There was a problem connecting to the server "Time-Capsule.local".
    The server may not exist or it is unavailable at this time.
    It's eventually just a hang.
    Switch off the wireless on all computers.
    Power off the Extreme and the TC
    Wait a minute or two
    Power on the Extreme and wait until the light is steady green
    Power on the TC and wait untill the light is steady green
    Reconnect the computers one after one
    Lupunus

  • Why did my time capsule stopped backing up?

    Why would my time capsule stop backing up, it is set to delet when the drive is full?

    LaPastenague wrote:
    Many people report that TM no longer deletes old backups as it should.
    That does happen sometimes, but for many different reasons.
    TM should never run out of space
    Yes, it can.  First, remember that it deletes entire backups, not the backups of individual files.  Second, it won't ever delete the last remaining backup.  
    So if it needs to do a very large backup, there needs to be room for the last remaining backup, plus the new one, plus some workspace.  That's why we recommend that the TM drive be 3-4 times the size of the data it's backing-up.  If it's much less than that, and there's a need for a large or full backup, there may not be enough room.
    as i understand how it works, it should simply give a warning that the old backups need to be deleted.
    That's how it worked on Leopard, if you had the "Warn when old backups are deleted" option checked -- the backup would fail if there wasn't room.  All you had to do then was remove the check, but many folks didn't understand that. 
    So, effective with Snow Leopard, the option is now "Notify after old backups are deleted," and that's what happens -- old backups are deleted automatically when necessary, and a notice is sent only after the new backup completes.
    It seems that after an upgrade install of the OS.. TM ceases to have the ability to delete old backups.. it simply runs out of space and refuses to backup.
    Normally not.  Some have turned out to be users who actually did a "clean install," erasing their internal HD.  If you do that, and don't use either Setup Assistant or Migration Assistant to put your data back (and transfer Computer Settings), the erased drive is treated as a different one.  In that case, TM will do a full backup, so requires a lot space.
    However, effective with Mountain Lion, TM does add more space for "padding" than before, sometimes quite a bit more, so a drive that was barely large enough on Lion or earlier may be too small now.
    EDIT:  A good way to figure out what's going on is to look at the log messages, either by using Console and filtering for backupd, or via the widget in #A1 of Time Machine - Troubleshooting
    Message was edited by: Pondini

  • My Time Capsule stopped working suddenly. The led won't lit up even if I do a hard reset.

    Suddenly I noticed that my Time Capsule stopped working. The led doesn't light up any more and there's no noticeable activity in it.
    Is it possible to recover my backups?

    Dead TC power supply syndrome is standard on all Gen1 and Gen2 TC.
    It has plenty of info on the web.
    https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    As far as HD is concerned it will mostly be ok. Either fix or remove the TC hard drive and use in USB box, as mentioned.
    If it is Gen3 there is a different problem.
    Tell us the actual model number from the rubber base.

  • Time Machine backup to Time Capsule stopped ...

    Time Machine backup to Time Capsule stopped ... and seemingly endlessly keeps on preparing for the next backup. Did anyone encounter this problem too? Thanks! Daniel

    7/4/08 9:13:06 AM com.apple.backupd[250] 2008-07-04 09:13:06.613 diskimages-helper[297:1603] Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:
    7/4/08 9:13:06 AM com.apple.backupd[250] /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: mach-o, but wrong architecture
    7/4/08 9:13:06 AM com.apple.backupd[250] 2008-07-04 09:13:06.614 diskimages-helper[297:1603] Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x51fa30 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
    7/4/08 9:13:07 AM com.apple.backupd[250] 2008-07-04 09:13:07.110 diskimages-helper[297:1603] Error loading /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: dlopen(/Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/Ma cOS/VirtualPCDiskImagePlugin, 262): no suitable image found. Did find:
    7/4/08 9:13:07 AM com.apple.backupd[250] /Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle/Contents/MacOS/Vir tualPCDiskImagePlugin: mach-o, but wrong architecture
    7/4/08 9:13:07 AM com.apple.backupd[250] 2008-07-04 09:13:07.111 diskimages-helper[297:1603] Cannot find function pointer MacDiskImagePluginFactory for factory 7F1FD83E-6684-11D8-968F-000A957703C0 in CFBundle/CFPlugIn 0x51fa30 </Library/Plug-ins/DiskImages/VirtualPCDiskImagePlugin.bundle> (bundle, not loaded)
    7/4/08 9:13:08 AM /System/Library/CoreServices/backupd[250] Disk image /Volumes/Doug's Time Capsule-1/G4’s Computer_0016cb843ff6.sparsebundle mounted at: /Volumes/Backup of G4’s Computer
    7/4/08 9:13:08 AM /System/Library/CoreServices/backupd[250] Backing up to: /Volumes/Backup of G4’s Computer/Backups.backupdb
    7/4/08 9:13:12 AM /System/Library/CoreServices/backupd[250] Event store UUIDs don't match for volume: Hard Drive
    7/4/08 9:13:12 AM /System/Library/CoreServices/backupd[250] Forcing deep traversal on source: "Hard Drive" (mount: '/' fsUUID: C5625712-89CC-3B4B-99B9-F6DB1DC28614 eventDBUUID: F6938DB2-A057-4D7E-A9FC-9BF0AD86DC9D), {1, 1, 1, 0}
    7/4/08 9:13:12 AM /System/Library/CoreServices/backupd[250] Node requires deep traversal:/ reason:kFSEDBEventFlagMustScanSubDirs|kFSEDBEventFlagReasonForceDeepBackup|

  • Time capsule stopped saving suddenly

    Hi
    All of a sudden my time capsule stopped saving on the time machine. Actually, I do not know what really happened that time machine is not anymore saving to time capsule.
    I reseted the capsule but nothing has changed..still no saving, though I have lots of space on my Mac
    Any idea, please
    Thanks

    Check Pondini's Troubleshooting pages for your specific situation http://pondini.org/TM/Troubleshooting.html

  • Time capsule stopped

    I have a Macbook white and upgraded to the Yosemite. My time capsule stopped working. Any solution?

    If within warranty or applecare on a computer Apple will replace.
    Otherwise it is dead.. power supply burned out.. absolutely standard fare for TC. How old is it and what Generation?
    Fix, https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    Find a repairer.. not an Apple one as they consider it a consumable and will not fix or repair.
    Or dispose of and buy a new one.

  • SBG6700AC stops broadcasting SSID

    My new ARRIS SBG6700-ac stops broadcasting SSID for 2.4 ghz intermittently. Latest firmware from Comcast installed.  All power level check by Comcast and is OK.  5 ghz and hardware wire ports all work OK. Any advice?  Thanks Paul

    The thing is though, the wireless radio is still working. I have no trouble connecting on my main network even when it's not broadcasting. I never lose my connection and all my devices still connect automatically. The only trouble that I can see is that my guests have trouble connecting because they can't find the guest network in the available connections. My network never goes down, nor does the guest network. The guests simply can't "see" it and therefore can't connect to it. 

  • Wireless connection between D-Link WiFi router and Time capsule stopped working

    We have an ISP provided D-Link wireless router (DIR-615) to which we wirelessly connected our 2Tb Time Capsule for back up and to connect a USB printer to out network. This worked perfectly for 3 1/2 years, until about a month ago, when the time capsule suddenly decided to go "off line". ie we could no longer access it or the printer via our wireless network. We had changed nothing - just one day it stopped working.
    We tried to get it back online with no success. As the 2Tb Time Capsule was almost 7 years old and had had some HDD issues in the passed, we figured it had got old and died and that it was time to replace it; so we bought a new 3Tb Time Capsule, thinking this would get everything back to normal.
    However much as we tried, we were also unable to get the new 3Tb Time Capsule to connect wirelessly to the D-Link wireless router. The Airport Utility did not show the D-Link wireless router or its wireless network, although we were (and are) able to see it in Systems Preferences>Networks from all our multiple devises. This in itself seemed odd. No matter what we tried, the Airport Utility would not find the D-Link wireless router and hence we could not add the 3Tb Time Capsule to the existing wireless network.
    At the end of the day we got fed up with trying to add the 3Tb Time Capsule to the D-Link wireless network, and connected it via a LAN cable to the D-Link router instead. We then set it up as its own network. Worked gerat. Having done that we thought maybe the old 2Tb Time Capsule might not have been the problem after all, so we tried extending our new 3Tb Time Capsule wireless network using the 2Tb Time Capsule wirelessly. This worked perfectly! And we are now almost back to what we wanted.
    So although we have a work around, this means now have 2 separate wireless networks as opposed to the original single wireless network where everything talked to everything else.
    Can anyone shed any light on any of the following:-
    1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
    2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
    3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?

    1. Why the original wireless network connection between the D-Link router and the 2Tb Time Capsule just stopped working? Was there some software change from Apple that "decided" D-Link wireless routers were no longer secure; and therefore the TCs could no longer connect to them?
    A firmware update to the TC came along and you agreed to it without perhaps even noticing.. it then smashed your setup because Apple do not recommend the setup you were using and it is very poor.
    2. Why it was not possible to extend the existing D-Link wireless network using the the new 3Tb Time Capsule?
    Because it is such a poor setup that Apple have taken away your ability to choose it unless you know exactly what you are doing.
    3. Is there is anyway that we can get back to a single wireless network based around the D-Link wireless router as the primary router connecting to the modem, where the 2 Time Capsules connect as "wireless satellite base stations"?
    Yes, this I can help you with.
    I have several ways around the problem.. but the first one is.. why use the DIR-615 at all.. it is not a modem.. it is a very ordinary bottom end, poor single band slow wireless router.
    Why don't you simply remove the DIR-615 from the network completely.. plug whatever it is the ISP supplies you.. an ethernet connection from whatever that modem is you mentioned into the WAN port of the Time Capsule. And use the TC in some router mode.. same as the DIR-615 was setup.. dhcp or pppoe or whatever.. I doubt the TC cannot match it.
    If you have issues please post a few screenshots from the DIR-615 to show how it is setup from the WAN side.. and as long as you are given the username and password or whatever the ISP uses to authenticate then chuck out the DIR-615.
    Tell me if that is a goer.. if not we can work out a few other methods..
    eg. Simply turn off the wireless in the DIR-615. It is poor cf the TC and there is no need for it.. with the TC in bridge only use the TC for wireless as well as wireless extend with your old TC.
    Or setup roaming network where everything uses the same SSID.
    Then you will have one wireless network. And it won't matter what as long as it connects.. although IMHO this is not right as the TC is such a superior router now you are wasting your new TC.

  • HT201514 Time capsul stopped working and now cannot be mounted

    After hourly backups for the last month (since I bought Time Capsul), Time Machine just stopped.  Initially, the message in Time Machine was "backup delayed".  I clicked on "backup now" and that message disappeared -- so did Time Capsul.  Now Airport Utility no longer "sees" Time Capsul.
    -- Time Capsul is the 3TB model, purchased a little more than one month ago.
    -- I am backing up roughly 700 GB of data
    -- Both My iMac and my Macbook Pro run on OS X 10.7.5
    My iMac is connected to Time Capsul by Ethernet cable.
    My Macbook Pro is connected wirelessly
    Neither the iMac nor the Macbook Pro can "see" the Time Capsul, or find it in Airport Utility.  Both my iMac and my Macbook Pro have been backing up flawlessly for more than a month.  The backup stopped yesterday with the message "backup delayed", as previously stated.
    Is there an explanation and a fix for this problem?  That's a pretty short life span for a month old $500.00 purchase.

    My Mac book Pro does, in fact, see Time Capsule and is able to do a backup via wireless connection.
    My Internet connection works fine -- Time Capsule light is green.
    As to your question of:  "Did you upgrade to 10.7.5 after the first faulty  update was released?", I can't answer that question.  I have no memory of a notification of a faulty update.  I do, however, have the build 11G63 installed.
    Would it be beneficial to do a factory reset?
    Don't you just love it when nothing makes sense.. !!
    Yes, do a factory reset of the TC..
    Using the airport utility, on whichever computer can connect.. give the TC SMB names for everything.. TC network name, wireless names, and hard disk name.. that means, short, no spaces, pure alphanumeric.
    In Lion use the 5.6 utility.
    http://support.apple.com/kb/DL1482
    The v6 airport is a toy.. plastic hammer.. suitable for toyland networks.
    You might need to reset the TM in the computers..
    A4 here. http://pondini.org/TM/Troubleshooting.html
    Are you using the TC as router or in bridge? What broadband do you have?
    Check for instance the ethernet is working from the connectivity led on the ethernet port of the TC.. it will show green.

  • Time Capsule - stops hard drive

    Hi,
    I have a 1GB Time Capsule, and I have all of my videos stored on this.
    How can turn off the Energy Saver things?
    My TC turns off it's HDD after a few minutes of inactivity. When I watching a movie, and I pause it for 4-5 minutes, the TC stops the HDD. When I want to continue the movie, the TC must spin the HDD, and wake up, and it is too much time for the buffered movie, and it freezes for seconds.
    I think I want to set up 30 minutes, or I don't know, but this setting is not good for me.
    Anybody noticed that before?
    Regards,
    Balint

    I still have this problem.
    I think I can not find any solution for this issue from Apple.
    Can anybody have a good knowledge in AppleScript, or sth. programming language.
    It is a good solution, when I have a software what periodically do a refresh for a specific directory on TC, and this is an activity for TC and it's can't stop the HDD.
    What do you think? Is it possible to have a software or script what do this?

  • Airport Time Capsule stop send wireless signal, Airport Time Capsule stop send wireless signal

    After instaling several times, alway after a while the wireless router stop sending the signal, or does not start up like in the morning, especially from a windown computer.
    Out house have several computers in Windows and Mac, iphones and ipads and itouch mac book pro,
    How come the router will not start up after a "night of rest"

    Unfortunately, a solid amber is light is not a good sign.
    Try a complete Factory Default Reset on the Time Capsule using the steps below. This procedure will not affect any of the data that you have stored on the internal hard drive.
    Power off the Time Capsule for 15-20 minutes or longer
    Hold in the reset button on the back of the Time Capsule first, and keep holding for an additional 9-10 seconds while you simultaneously plug the power back in to the Time Capsule
    Release the reset button after the 9-10 hold period and allow a full minute for the Time Capsule to restart
    The Time Capsule light should normally stay solid amber for about 30 seconds and then change to a slow, blinking amber light, indicating that the Time Capsule has been reset and it can now be reconfigured.
    If you try the Factory Default Reset a few times and the light stays solid amber, unfortunately the hard drive has failed, or there is an internal power supply issue with the Time Capsule.
    You should take the Time Capsule to an Apple Store.....if you have one in your area.....or contact Apple Support directly to discuss your options. 
    http://www.apple.com/support/contact/
    If the Time Capsule is out of warranty or not covered by AppleCare, Apple will not offer repairs but there are some shops that specialize in this type of repair. See this link for more details:
    Apple Time Capsule Repairers

  • How to get Time Capsule to broadcast n/ac only

    Hi
    I'm guessing this cannot be done as it isn't made obvious - but can it be done? I've found a lot around the older time capsules and older Airport Utilities, but does anyone know how to do this on the newest Capsule (looks like a tower) and the newest Airport Utility?
    Would be much appriciated.

    Thanks for the reply & answer
    Thats a shame, my only reason in wanting to do so is I thought I read that when people turn off unnecessary broadcasting like a/b/g it improves their signal. Wasn't sure of this, but wanted to try it as I might as well.
    Yes I do know that ac only works with my iMac (2013) and iPhone 6 - all our other devices such as iPad 2, iMac (2011) won't.
    I only wanted to try improving my PS4 connection, it's in the next room pretty much and the WiFi signal varies from 70% - 90% - it averages 80% - my iMac in the same room gets 38mb download on WiFi, and the PS4 gets about 21mb. I'm guessing it's the PS4 receiver not being so good, but I remember the days I used to get a signal at the end of the garden with a Linksys Cisco, I can hardly get a signal now in my living room. Again though, that was over 7 years ago when no neigh boroughs had WiFi, problem nowadays there is so much interference.

Maybe you are looking for