Time capsule / time machine conflict?

I keep getting a promt from FCPX everytime Time Machine activates from the Time Capsule backup drive. How can I stop that?

Yes, turn off time machine.
See this info: http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
Carl

Similar Messages

Does Time Machine conflict with Crashplan offline backup for Macs?

Hello,
Has anyone experienced Time Machine on Macs conflicting with Crashplan offline backup for Macs? I would like to run both on my iMac... Time Machine for local backup to my E-drive and Crashplan for a backup to their servers.
Thanks

This article may be of help to you:
http://support.crashplan.com/doku.php/articles/time_machine
I also want to point out that CrashPlan also supports local backup.

Time Machine and File Vault problems

Hi,
Since I converted to Mac more than a year ago, I turned my file vault on (although I learned in the meantime that it is not actually necessary....)
I now recently bought the time Capsule and found out that the Time Machine doesn't go well with the File Vault turned on. It does back up the home folder only when logged out and I don't get the hourly backups for single files either.
I then tried to turn File Vault off, but get the error message that I haven't got enough space on my hard disk (which I have). This message led me to this article here: http://support.apple.com/kb/TS1974
I am really not an expert and not too confident to play around with accounts, backups and so on, so I really don't want to go down the described route.
For me, it looks like a bug in OS X, I should be able to turn File Vault off with the click of a button. Also, why is the File Vault / Time Machine conflict nowhere mentioned ? I was playing round with TM to recover a single file, but this wasn't possible, that's why I went to explore the issue further...
I now just want to turn off File Vault and finally want to use my TC normally.
Who can help ?
Message was edited by: Mike201071

....so, it seems to work now.
I did eventually go through the routine of backing up my home folder manually on the TC, then I created a new account, copied everything back, deleted the old account, and so on, as described in the link above.
I did not turn on the File Vault, activated TM and backed the whole lot up via Ethernet, switched back to wireless and TM seems to do the trick now.
I have now access to single folders and files when I go back in time in TM, instead of the whole backup only.
This seems to be the only way TM & TC are working properly, why is this conflict between File Vault and TM nowhere mentioned ?

Can I have two Time Capsules in the same network, use one as Time Machine and other to expand network?

I need to purchase a divice to expand my Wi-fi network. I was looking at the AirPort Extreme, but a friend has a brand new Time Capsule for sale. So, for the same price of the AirPort Extreme, I´m getting the Time Capsule.
I already own one and using it as Time Machine and wireless router. If I decide to purchase another TC would it have any conflict with the one that I already have?
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?

If I decide to purchase another TC would it have any conflict with the one that I already have?
No
Is it possible to use one as Time Machine and wireless router and the other to just expand network and storage only (not as Time Machine)?
Yes. The important thing to remember is that the "extending" Time Capsule must be located where it can receive a strong wireless signal from your "main" Time Capsule.

Using TIME MACHINE with a TIME CAPSULE

There's often a bit of confusion about this terminology: +*Time Machine+* vs. +*Time Capsule:+*
_*Time Machine*_ is Apple software that performs backups, to an external HD, a Time Capsule, etc.; and also allows you to browse and restore from them. It comes with Leopard and Snow Leopard, but cannot run on any previous versions of OSX.
A _*Time Capsule*_ is a piece of Apple hardware that combines a wireless router and hard drive, that can be used for Time Machine backups and/or other data.
Most Time Machine questions & problems are not unique to Time Capsules. For those, or if you don't find what you need here, try one of these:
Time Machine - Frequently Asked Questions
Time Machine - Troubleshooting
They can also be found in the *User Contributed Tips* section of both +Time Machine+ forums:
Mac OS X v10.5 Leopard > Time Machine
Mac OS X v10.6 Snow Leopard > Time Machine
Contents
|
QUESTIONS
*Q1. How do I set up Time Machine to back up to my Time Capsule?*
*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*
*Q3. Can I use my Time Capsule for Time Machine backups AND other data?*
*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*
*Q5. Should I delete backups? If so, how?*
*Q6. How do I back-up my Time Capsule and/or USB drive(s) connected to it?*
If you don't see your question here, try the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
|
PROBLEMS
*P1. The Backup disk image could not be created.*
*P2. Time Machine could not complete the backup . . sparsebundle could not be accessed. (Error 109).*
If you don't see your problem here, try the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
QUESTIONS
|
_*Q1. How do I set up Time Machine to back up to my Time Capsule?*_
|
First, set up your Time Capsule via +Airport Utility.+ Keep the name you assign to it, your Computer, and your network short (under 25 characters), and avoid embedded spaces, special characters, and punctuation (see item #P1 below for details). Make sure your Mac can connect via an Ethernet cable, if at all possible, as well as wirelessly.
The setup and first backup (of your entire system) will be much faster if you connect via Ethernet.
|
a. If the +Time Machine+ icon isn't already in your Dock, drag it there from your Applications folder. See below for more about it's use.
b. Right-click it and select +Open Time Machine Preferences,+ click the +Show Time Machine status in the menu bar+ box (see below), then click +Select Disk+ (on Leopard, this button will be either +Choose Backup Disk+ or +Change Disk).+
c. A list of possible destinations will appear. It should include your Time Capsule (with the name you gave it via Airport Utility), and may show other internal or external drives as well. Select your Time Capsule and click the +Use for Backup+ button.
d. A prompt for your name and password will appear. In some cases there won't be a Name field, but if there is, enter your short user name. Also enter the password you set up for the Time Capsule via Airport Utility, then click the Connect button.
e. A 120-second countdown to the start of your first backup will appear in the +Next Backup+ area of the TM Preference panel.
|
Note that this first backup will copy the entire contents of your system, except for a few things that are skipped automatically, such as system work files, most caches, your logs, trash, etc., and anything else you may have excluded (see #10 and #11 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum). So it will be rather lengthy, depending on how much data is on your system, whether you're connected via Ethernet or WIFI, and if WIFI, how good the signal is.
You can continue to use your Mac while TM is backing-up, and you can even cancel a backup if necessary, but to make this first full backup as fast as possible, try not to overload your Mac or cancel the backup.
|
_*The Time Machine Icons in your Menubar and/or Dock*_
|
In the steps above, you dragged the TM Application's icon into your Dock, and clicked the +Show Time Machine status in the menu bar+ box.
For detailed info about them, see question #24 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
+Go to Top+
_*Q2. How do I set up Time Machine to back up to a USB drive connected to my Time Capsule?*_
|
Mostly the way you set it up to use the Time Capsule's internal HD.
But first, attach the drive directly to your Mac, and erase and format it per the instructions in #5 of the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum. Note, however, that it doesn't matter whether you use the +Mac OS Extended (Journaled)+ or +Mac OS Extended (Case-sensitive, journaled)+ Format, since Time Machine will put your backups in a sparse bundle that's case-sensitive. You cannot change that.
Unlike the Time Capsule's disk, you can partition the USB drive. That's highly recommended if you're going to be putting other data there, so the backups don't completely fill the disk (but be aware that Time Machine cannot back that "other" data up. See question #Q6 below).
If you're backing-up multiple Macs to the same drive, you can make one partition for each, but it's not as helpful on a network drive, because each Mac's backups will be in a separate sparse bundle. So you can let them share the disk or a partition.
Also note that if you've been doing backups to an external disk connected directly to your Mac, you cannot continue the same set of backups when you connect it to your Time Capsule. They are stored differently, and Time Machine will put them in a sparse bundle, alongside but *completely separate from* the backups made locally, and the first backup will be a full backup of your entire system.
Once the USB disk is set up the way you want it, use the setup procedure in question #Q1 above, but in step (c), select the USB drive/partition, not the Time Capsule's internal HD.
*RAID Sets connected to a Time Capsule:*
|
Time Machine will back up to a +Hardware Mirrored RAID set,+ also called +RAID 1,+ (sold that way, with multiple drives in the same enclosure). However, if you partition the +Hardware Mirrored RAID set,+ once you start using it with TIme Machine, you cannot change the sizes later and continue to back up to the same set of backups.
While you can connect multiple USB drives to a Time Capsule via a USB hub (a powered one is best), Time Machine +*will not+* back up to a +software Mirrored RAID+ set (where you combine the drives into a single volume via Disk Utility).
+Go to Top+
_*Q3. Can I use my Time Capsule for Time Machine backups and other data?*_
|
You can put other data on your Time Capsule's internal HD, but there are three major considerations:
Especially for things like photos and videos, access may be too slow for convenient viewing, and worse for editing. So test this a bit before you decide what to put there.
Time Machine cannot back-up that other data, so you'll need some other method. See question #Q6 below.
Time Machine will, by design, fill up all the space available to it, so there may be a conflict between the sparse bundle it puts your backups in, and the other data. There is a workaround, to "reserve" some space there, by creating a disk image of the desired size and storing your data there, but it's a bit cumbersome, and two Macs can't share it at the same time.
An alternative is to connect a USB drive to your Time Capsule. Then you can back up to the TC's disk and use the USB drive for other data, or vice-versa. But note that Time Machine cannot back-up the USB drive while it's connected to the TC (see question #Q6 below).
If you want to reserve space on the TC's internal disk, here's how:
|
a. Start the +Disk Utility+ app (in your Applications/Utilities folder). Click the +New Image+ icon in the toolbar (or select +File > New > Blank Disk Image+ from the menubar). If the little arrow to the right of the "Save As" box points down, click it so it points up.
b. Give it a name in the "Save as" box. This name will appear on the TC's disk, with ".dmg" appended. (Similar to the way the sparse bundle containing your Time Machine backups appears, with ".sparsebundle" appended).
c. Click your TC in the sidebar. It may take a few moments for Disk Utility to recognize it, and show it in the center pane.
d. In that center pane, select the blue Share folder for your +Time Capsule+ (you may need to scroll down, or enlarge the window, to see it). Once selected, you'll see any existing disk images in the right pane.
e. Give the Image a name. This name will appear on your desktop and/or Finder sidebar when you mount the .dmg by double-clicking it, if you have the +External Disks+ box checked in +Finder > Preferences > General+ or +Finder > Preferences > Sidebar.+
f. Select the Size for the amount of space you want to reserve, either one of the pre-sets or Custom which allows any size. Avoid taking all the remaining space for the disk image, as Time Machine needs a bit of room to operate. Also note that if very little space is left, it will begin deleting old backups very soon, to make room for new ones.
g. Select the desired Format, probably the default of +Mac OS Extended (Journaled).+
h. If you want it encrypted, select the desired type.
i. Select single partition, either GUID or +Apple Partition Map.+
j. Select +Read/Write disk image+ for Image Format.
k. Click the Create button. The larger the image size, the longer this will take.
|
When complete, the new disk image will be automatically mounted on your Mac's desktop, ready to receive the files you want to move into it. (When you first open a disk image, there may not be a sidebar and/or toolbar; if so, select +View > Show Toolbar+ from the Finder menubar.)
To access this disk image from another computer, you must first eject it from this one, since only one can mount it at a time. Otherwise, the other one will see a message that the disk image is "Temporarily unavailable."
Note that you may be able to change the size of the disk image later, via +Images > Resize+ from the Disk Utility menubar (while the disk image is not mounted or selected in Disk Utility's sidebar).
+Go to Top+
_*Q4. My Time Capsule is too small to back-up my Mac(s). Now what?*_
|
You can attach a USB drive to your Time Capsule. Then you can back up to the USB drive instead of the Time Capsule's internal HD. If you have multiple Macs, you can back some up to the TC's internal drive, and others to the USB drive.
If you need even more space, you can connect multiple USB drives via a hub (a powered one is usually best), and back up different Macs to each. What you cannot do, however, is have one Mac's backups continue from the Time Capsule's internal HD to a USB drive connected to it, or have the backups for any one Mac "span" two drives.
The exception is, you can connect two (or more) drives that are in a +concatenated RAID+ set (sometimes called +RAID 0).+ In that configuration, all the drives in the set are treated as a single volume (see +Concatenated RAID+ in the Help for Disk Utility for details). This configuration may cause some other difficulties; once they're in a RAID set, you cannot connect any drive to your Mac separately -- it's all or none. And if one drive fails, you risk losing everything on all the drives in the set.
See question #Q2 above for setup instructions for backing-up to the USB drive.
+Go to Top+
_*Q5. Should I delete backups? If so, how?*_
|
It depends on exactly what you want to do, and why.
Under normal circumstances, you shouldn't have to delete anything. TM automatically "thins" (deletes) backups every time it does a new backup, on the following schedule:
"Hourly" backups after 24 hours (except the first of the day, which is a "Daily" backup).
"Daily" backups after a month (except the first of each week, which is a "Weekly" backup.)
"Weekly" backups are kept until TM needs the space for new backups; then one or more of the oldest weeklies will be deleted.
However, TM will never delete the backup copy of anything that was on the disk being backed-up at the time of any remaining backup. So all that's actually deleted are copies of items whose originals were changed or deleted before the next remaining backup.
But if you do need to delete backups, here's how:
To delete individual backups, or all backups of selected item(s), see #12 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.
To delete everything on the Time Capsule's internal HD, use +*Airport Utility.+* Select +*Base Station > Manual Set-Up+* from the Menubar, then Disks in the tool Bar, then Erase.
To delete everything on a connected USB drive/partition, you can delete via the Finder, but that may take a very long time. It may be faster to disconnect it from your Time Capsule, connect it directly to your Mac, and use Disk Utility (in your Applications/Utilities folder) to erase the disk/partition.
To delete all the backups for one Mac, without disturbing anything else on the Time Capsule's internal disk, open the TC via the Finder and delete the sparse bundle associated with that Mac.
To delete all the backups for one Mac, without disturbing anything else on a connected USB drive, either open the USB drive via the Finder and delete the sparse bundle associated with that Mac, or disconnect the drive from the TC, connect it directly to your Mac, and delete the sparse bundle from there.
+Go to Top+
_*Q6. How do I back-up my Time Capsule and/or attached USB drive(s)?*_
|
That depends to some extent on what you want to back up, and where it is.
It's generally not a good idea to try to back-up your Time Machine backups. If there's a problem with them, it will be copied to (and perhaps magnified on) the copy.
A better solution is probably to use either Time Machine or a different application to make separate, independent backups of your Mac, to a different destination. A portable external hard drive is great for this; you can periodically connect it to your Mac, make a backup, then take it to a secure off-site location, so you're protected against fire, flood, theft, direct lightning strike on your power lines, etc. If you use Time Machine for this, you'll have to use the disk selection process each time you want to switch, via +Time Machine Preferences.+
Many folks use the CarbonCopyCloner or SuperDuper! apps to make "bootable clones" of their internal HD to an external HD. While these usually don't have "archived" copies of previous versions of things you've changed or deleted, you can boot and run your Mac from them if your internal HD fails. Your Mac may run a bit slower, but it will be usable. Both are easily found via Google.
Since Time Machine cannot back up your Time Capsule's internal hard drive, or a USB drive connected to it, if you have other data there, you'll need a different method to back up that other data.
In a pinch, you can disconnect a USB drive from your Time Capsule, attach it to your Mac, and copy or back it up that way.
|
There is a procedure that will let you "archive" the TC's internal disk to a USB drive connected to it.
But it's not quick, since since the data must be read from the TC's internal disk to your Mac, then sent *back through the Time Capsule* to the connected USB drive. And it's "all or nothing" -- you can only use this procedure to copy the entire contents.
All users will be disconnected from both the internal HD and the connected USB disk (but the network will remain usable).
Attach a USB drive with at least as much free space as the total amount of data on the TC's internal HD (see #5 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum, for formatting instructions).
Turn Time Machine "Off" via +Time Machine Preferences.+ Stop all processes that may be accessing the Time Capsule's disk. If possible, connect your Mac to the Time Capsule with an Ethernet cable -- it will still be slow, but faster than WIFI.
Then follow this Apple procedure: Using AirPort Utility 5.3.1 or later to make a copy of the Time Capsule disk.
+Go to Top+
PROBLEMS
|
_*P1. The Backup disk image could not be created.*_
|
Oddly enough, Time Machine can be rather picky about the way certain things are named.
Check your +*Computer Name*+ at the top of the System Preferences > Sharing panel.
It must not be blank; it should not be more than 25 characters long; and you should avoid punctuation, spaces, and special characters.
After changing it, click the Edit button and make the corresponding change to the +*Local Hostname.+*
If that doesn't help, apply the same rules to the name of your Time Capsule and Network, via +Airport Utility.+
+Go to Top+
_*P2. Time Machine could not complete the backup .. sparsebundle could not be accessed. (Error 109).*_
|
The sparsebundle containing your backups is corrupted.
Try Repairing it, per #A5 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If the sparsebundle is on your Time Capsule's internal HD, and Disk Utility can't fix it, your only option is to delete it (or erase the TC's disk), and let Time Machine start over. You may be able to prevent this from happening again by changing the names per problem #P1 above.
If the sparsebundle is on a USB drive connected to your Time Capsule, and Disk Utility can't fix it, it's possible a heavy-duty 3rd-party +Disk Repair+ application, such as +Disk Warrior+ can. (You'll have to connect the drive directly to your Mac.) These are not cheap, and there's no guarantee they can fix it. Be certain whatever you use is compatible with your OS. For Disk Warrior, you need at least version 4.1.1 for Leopard, 4.2 for Snow Leopard.
+Go to Top+

This tip is ready for consideration.
It is an update to the current Tip at: http://discussions.apple.com/thread.jspa?threadID=2296894
Changes:
Q1: replaced info about the TM icons with a link to the TM FAQ tip.
Q2: added info about RAID sets attached to a TC
Q6: reworded a bit and replaced last paragraph with a link to the Apple article.

Time Machine says Time Capsule Disk unavailable

     I have the exclamation point in the menubar icon and Time Machine says Time Capsule Disk unavailable even though I have backed up to it many times before. I tried unpluging/plugging in the TC, but this did not solve the problem. Any ideas?

      However, I did have a problem periodically with computers not recognizing the TC disk before I had unclicked the "Enable file sharing" box, so I might still end up using your advice if this happens in the future.
There is a bug or several of them.. losing the disk is one thing the new 7.6.4 firmware is supposed to fix.. my deeply held suspicion is that Apple are using all of us as beta testers.. as lots of people are having trouble. But who knows it may finally fix this bug.. we are awaiting confirmation. ie people saying it is now fixed.. rather than since loading 7.6.4 my TC is now dead.. or disappeared .. or broken.. or no longer has wireless output.
Lets say maybe they fixed a bug.. and added some more.
     The reason I had unchecked the "Enable file sharing" box is because I have Mountain Lion Server and wanted to use port mapping on the TC to point to my computer as a File Server. To do this I went into Airport Utility and in Network pane tried to add File Sharing to the Port Settings. However, this conflicted with the "Enable file sharing" box from the Disks pane. Do you know of a way to have time machine backups to TC but also run a File Server from a computer networked with the TC using port mapping? Thank you for any guidance.
You only need the ports forwarded to the server to get outside access.. ie remote wan access.. Did you have wan access to the TC checked.. that will cause a conflict with AFP .. since it cannot be forwarded to multiple destinations at once.
If you do not have WAN access checked then you should be able to check "enable file sharing" since that is local lan..
Try it and tell me what happens.. I have never tried the combo you are using.
I would try simply using a different method to access if that doesn't work.. eg BTMM should work fine to the Server without needing ports forwarded in the TC.. as long as the TC is the main router.. and this whole issue is only because the TC is the main router.
You can also do it with vpn.. which is more robust and more business/pro method to access a server remotely than AFP.

Use time capsule both for time machine and external disk

is there a tuto on how to configure the time capsule to be able to use it both as a time machine back-up utility and a storage external disk for music files and video files, for example?

Mixing Time Machine backups and other data on a TC's internal HD presents some conflicts. See #Q3 in Using Time Machine with a Time Capsule for an explanation and some workarounds.
Also . . . how are you planning to back up the "other" data?

Backups to Time Capsule Time Machine Leo Advanced

So it looks as if one is just backing up data, not the server, Time Machine will work in a Leopard Advanced server... now it seems AFP conflicts with using drive sharing on a Time Capsule. Any way around this? To be able to use Time Capsule's hard drive for backup and still have AFP ports open? ~ Jeanette

See #C17 in Pondini's excellent support document.....Time Machine -- Troubleshooting.
http://pondini.org/TM/Troubleshooting.html

Setup Time Capsule as wireless device and Time Machine with Ethernet?

I'm running the latest version of Airport Utility (6.3.4) with a TC a1254 and Macbook Pro platinum late 2007.
I have a modem/router Ryge model Wa41r.
Ive tried everything I could find in the forums and in expert pages and can't configure my Time Capsule as a Wireless Device connected to the modem/router and Time Machine with Ethernet Cable.
I tried letting it configure itself, it held the wifi signal for over 5 min then turned off. Never that way worked again.
Then I configured with other examples seen in Apple communities and expert Apple pages, but it conflicted with my routers signal. I turned off the Wireless Lan Interface and it turned off the Ethernet cable with the connection as well. I tried giving my TC different IP address.
So my Time Capsule gives me this status in flicking amber: Internet connection and Conflicting DCHP Range. (when I connect to my Mac the Internet works)
And strangely the wireless signal appears in my Macbook but not in my Android Phone.
Works fine doing backups when asked via ethernet.
Also when I go to check on it on Airport Utility in other wifi devices it appears but says "Device Not Found - device name- was previously part of your network. Check that is still in range...etc"

I would like to help you but you need to clear up some things..
A Time Capsule is plugged into the network by ethernet.. you back up to it using wireless or ethernet.. it should make no difference which.
When you say this..
Ive tried everything I could find in the forums and in expert pages and can't configure my Time Capsule as a Wireless Device connected to the modem/router and Time Machine with Ethernet Cable.
I cannot understand.. The Time Capsule plugs into the main modem router.. and should be in bridge mode..
Time Machine is not hardware.. it is the backup software on the computer.. there is no way you can connect Time Machine with ethernet cable. .you can connect the computer with Ethernet Cable..
But you need to clarify please.
If you wish to connect TC to the Modem router by wireless this is not possible. It must connect by ethernet.
You can connect your computer to it using either wireless or ethernet.
And strangely the wireless signal appears in my Macbook but not in my Android Phone.
It is likely the wireless name is not valid.
Make sure all names are short, no spaces and pure alphanumeric. 2-20 characters.. Do not use the Apple recommended names.. they can be totally wrong.
Also the password for wireless should be 8-20 characters but same rules.. pure alphanumeric mixed case and numbers.
Start again.
Factory reset the TC.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Plug it into the main router by ethernet.
Do the setup via the airport utility in a Mac or iOS device.
Follow the setup instructions above.
Then you can connect to the TC LAN ports by ethernet or use wireless on the computer.
Your modem WA41R. I cannot find details in English . .they are all Spanish so we may be having difficulty of language here.
But if the modem is working as router the TC has to be in bridge mode.. it will not work properly in router mode.
So you should see it set as bridge here.

Forgot password to access my Airport Time Capsule, can't restore Time Machine backup

It is stupid, I know, but after the first time I setup Time Machine in my Airport Time Capsule (6 months ago) i never had to use the password because it stayed stored in my Keychain.
Anyway, couple days ago I had to format the hard drive of my MacBook Pro and I did it thinking that I had a complete data backup stored in my Airport Time Capsule (encrypted data). It was late when I realized that I did not have the password written/stored anywhere. Nothing to do about it, just move on and start all over again.
I need to clean up my Airport Time Capsule and set it to factory default. I already accepted that I will lose all my data and it is okay. So far all I found was how to reset the wifi user/password but nothing about deleting stored data or reset to factory default without having the encrypted password. Can you please help me? Thanks in advance!

The encrypted data is not related to the Time Capsule.. that is purely Time Machine.
Very sorry for you.. it is one big danger when you encrypt.
Reset to factory.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Wipe the hard disk. Open the airport utility go to the disk tab. Click on erase disk.
Select just quick erase.. it just deletes the file table and is not secure but fine for your purposes.

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

How can two computers use time machine on same Time Capsule?

I just purchased a Time Capsule and successfully backed up my computer. My brother is on the same network but cannot get Time Machine to back him up on the Time Capsule without my backup being deleted.
How does one enable Time Capsule to serve as back up for two different computers?

There are some options:
Manually delete a number of old backups from the Mac that's "hogging" the space, per #12 in Time Machine - Frequently Asked Questions. After "compacting" that sparse bundle per the pink box there, you may be able to limit the maximum size of it, per #A8 in Time Machine - Troubleshooting.
Another is to connect a USB drive to the TC (likely with a powered USB hub), and back the other Mac up to it, instead of the TC's internal HD.

Can I use my time capsule for time machine back ups and as an external storage device?

I have a time capsule and have set it up so that my time machine back ups are saved on it, but I would also like to use it as an external hard drive. Is this possible?
I know nothing about computers so please tell me in very basic terms. thankyou!

By external hard disk we usually mean one plugged into the computer by USB or Firewire or Thunderbolt.
None of those works on the TC.. it is plugged in by ethernet or use wireless connection.. that means it is a network drive.. not an external drive. The difference might not mean much to you.. but it is totally different to the computer. In the former case the computer has full control of the disk. In the case of the network drive, the disk is controlled by the TC firmware and the files are stored and accessed by network. This has large implications.
So here is my standard response.
Store files on the TC.
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great. It was and is and ever shall be a backup device for Time Machine.
3. The drive is slow to spin up and quick to spin down.. there is no control. In fact the TC is so lacking in controls for even the router side.. that you cannot do more than the most basic of setups.
The following are controls on the hard disk side.
Reformat it. You can name the share. You can do a full archive of the whole disk. This will go at a speed of aprox. 30-50GB/Hr so calculate how long an archive of a full 2TB will take.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
Even apple btw say don’t do it.
http://support.apple.com/kb/TS5168 Although mostly about FAT32 it adds network drives.
5. iTunes can constantly lose connection to the library. The disk is slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

Time Capsule disk cannot be mounted nor found by Time Machine

Suddenly Time Machine can't find my Time Capsule disk to back up to.
I've tried setting up my Time Capsule in various ways, even resetting to default factory settings.
My network seems to work fine and Time Capsule is shining brightly green, but clicking on Time Machine Preferences, it asks me to Choose Backup Disk. Clicking on that I just get an empty list. No disks. My only choice is to Set Up Time Capsule, which I've now done a couple of times without change. The Apple Support suggest a change to a shorter name... Needless to say, this is not the problem. Tried that too.
When I click on Manual Setup and check the Disks tab, there are no disks available there either.
Patience running on empty... Anyone found a solution to this or is my only option to shut off this expensive machine forever (seeing as it doesn't back up and that it's started to hum annoyingly loudly)?
Any help at all would be greatly appreciated! Thanks!

My last resort was to connect my laptop and the time capsule with an usb cable.
The bad thing is that nothing happened. So for me this means heading back again to apple care so they tell me whats wrong with it (i just received it today from apple care because it stopped turning on 2 weeks ago and they didn't knew what was wrong with it).

Extracted Time Capsule Disk – Can't See Old Backups in Time Machine UI

Hello,
I was one of the unfortunate souls that purchased a Time Capsule in March of 2008, only to have its power supply die last month. Instead of buying a new one, I decided to take out the hard drive and attach it to an Airport Extreme.
The first few steps went fine: opened the TC, got the drive out, put it in a new case and hooked it up. Once I had it mounted, I told Time Machine to do a backup. And it did. And it was merely an incremental one. I was optimistic.
However, now when I "enter the Time Machine," I can only see the latest state ("Today/Now").
I'm wondering if anyone has an experience successfully extracting a TC drive, or if anyone has encountered my specific problem before. The fact that the backup action recognized the existing backups has me hopeful that there's simply some arcane preference somewhere that will make the Time Machine UI recognize everything properly. After all, the point of extracting the drive was so that I didn't have to start over.
Thanks!

Ok, immediately after posting I read Pondini's "Time Machine - TROUBLESHOOTING" thread (http://discussions.apple.com/thread.jspa?threadID=2057525) and found a solution in E2:
Also, sometimes TM will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the (badly named) Browse Other Time Machine Disks option. It's available by holding down the Option key while selecting the TM icon in your Menubar, or by control-clicking (right-clicking) the TM icon in your Dock.
You'll see a selection screen showing all the disks/partitions that have TM backups on them. Select the one you want, and you'll be taken to the normal TM "Star Wars" interface, where you should see all the backups on that disk/partition.
In my case, there was only the one disk showing, but when i selected it, all of my backups were visible.
I'm not going to mark this as "Answered" yet, because the regular "Enter Time Machine" menu option still does not work, as described above. But at least now I have a workaround to access the backups.

Time capsule / time machine conflict?

Similar Messages

Maybe you are looking for