Time capsule, VPN and wireless local printer

I am one of the masses that uses a VPN connection to work from home. Due to certain limitations of Snow Leopards native VPN client, I was forced to go back to a local client. My corporate connection requires tunneling. The net results of this setup are:
1) While connected to VPN, I cannot use my local wireless printer
2) Sometimes the printer will not work even after disconnecting unless I remove it and add it again (Communication error with printer given as cause).
Through some online research there are suggestions out there about configuring "split tunneling" on the wireless router. Since my router is Time Capsule, I am hoping that I might get some answers on this topic here. Is "split tunneling" an option on Time Capsule? Are there any other ideas on resolving this?
Thank you,
Pedja

I have a similar but sort of in reverse. I have set up my Mac Air via ethernet and would like to get my PC to do a backup as well to Time Capsule. I have put the airport utility on my PC and it recognizes the TC. How do i tell it to backup since I don't have something like Time Machine on the PC?

Similar Messages

  • Flipped on time capsule HD and wireless stopped working

    My Time Capsule has been working great. However, I just tried to activate the HD and the wireless stopped working.
    Any ideas?

    I have a similar but sort of in reverse. I have set up my Mac Air via ethernet and would like to get my PC to do a backup as well to Time Capsule. I have put the airport utility on my PC and it recognizes the TC. How do i tell it to backup since I don't have something like Time Machine on the PC?

  • Time Capsule: PC and Wireless on different IPs

    (Apologies if this has been answered recently, but I've used Search and gone manually through 10-15 pages and didn't see an answer)
    I just purchased a Time Capsule and have it successfully setup with my desktop PC via Ethernet cable. I also have a new Macbook Pro 17 and older MBA. The Time Capsule is clearly creating a wireless network which my various Macs can access. The PC can clearly see the Time Capsule as an external hard drive and Internet connectivity is fine.
    The problem is that the PC appears to be on a different IP address than my wireless router, meaning that I can't share my iTunes collection across my computers.
    How do I get my PC onto the same IP address as the general wireless network created by the Time Capsule?
    For background, I'm using a Comcast cable modem with a known fixed IP address, but I was unable to have success using Bridge mode, so I used share a Public IP.
    Thanks,
    Chris
    Message was edited by: Istari6

    I have a similar but sort of in reverse. I have set up my Mac Air via ethernet and would like to get my PC to do a backup as well to Time Capsule. I have put the airport utility on my PC and it recognizes the TC. How do i tell it to backup since I don't have something like Time Machine on the PC?

  • I set up time capsule using a wireless 4g modem.  it's been five hours and it still is saying making backup disk available (4.97 GB of 18.52 GB).  Can I stop the whole thing, get a ethernet cable and start over to increase the speed of the backup?

    I set up a new time capsule on a wireless 4g modem.  I started the initial backup.  It's been five hours and it still says "making backup disk available (4.97 GB of 18.52 GB)."  Can I stop the whole thing, connect my computer to the time machine using an ethernet cable and start over to increase the speed of the backup?
    Thanks,
    David

    Bunce wrote:
    oh i already did that. Im working on my imac and looking into this on my macbook. Was able to reproduce the issue again by trying to open TM. Locked out the finder again and had to restart. I checked the serial number and it was an early 2009 purchase with no coverage.
    If you bought a Mac and got AppleCare with it, within 2 years of buying the TC, the TC is covered, too.
    I have to admit that this $500 unit was the first to apparently junk out. The western digital that had my main data on that is my daily external that I store about 2TB of data on is still perfect and the new technology TM appears to already be cashed. Love the computers, not to big of a fan on the externals of the apple TV's. No life expectancy. Neither here nor there.
    suggestions before I either get this looked at or scrap the HD on it and move forward.?
    Reset the TC. See [Resetting an AirPort Base Station or Time Capsule FAQ|http://support.apple.com/kb/ht3728].
    Try a "full reset" of Time Machine, per #A4 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    If all else fails, take it to your local Apple Store or Authorized Repair location, they may be able to determine whether the disk is dead.
    If it is, they might replace the TC for you. If not, they won't repair it, but if the electronics are ok, you can replace the HD yourself, if you want to. See http://discussions.apple.com/thread.jspa?threadID=2542983

  • My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    My Time Capsule expired and no longer works. My printer (a HP) will now not work as it still wishes to connect through the Time Capsule. It will not allow itself be recognised through a USB connection to my Mac. Anyone got any ideas?

    You will need to install the printer on your Mac
    Open System Preferences (gear icon) on the dock
    Open Print & Fax
    Click the + (plus) button at the bottom of the printer list
    Wait for your printer to appear in the next box, then click it to highlight it
    Click Add at the lower right
    Be sure to select the correct printer when you try to print as you will see your printer listed twice. Good idea to make the printer now installed on your Mac the default printer so you do not have to choose which printer to use each time you want to print.
    You can also go into Print & Fax, select the printer associated with the Time Capsule and click the - (minus) button if you want to delete that location.

  • How to configure Time Capsule etc as a local network server with remote access server and for backups

    I'm trying to set up new 3TB Time Capsule as a wireless network server (with remote access) and for backups for use in a small office (of two Macs). We have a late 2011 Intel MBP and a brand new MBA both running 10.8.3. We have two external 1TB hard drives that until now have been attached the MBP for storage and backing up that computer, which up until now was the only machine in use. The MBA is for a new employee and we need to share and work on the same files, both here in the office and ideally remotely too via Back to my Mac. The MBP needs constant access. The MBA only occasional. The TC has 7.6.3 firmware and we've set it up using AirPort Utility 6.2. It is currently attached to the MBP via ethernet and it has internet access via a Sagemcom router attached to TC's WAN port.
    We've managed to set up a wireless network and both have wireless internet access through the TC
    But there are so many issues I don't know where to begin - so I'll start with a description of what we're trying to achieve:
    I planned to use the TC as the main server drive and place all the key folders and files there so that both of us can access them wirelessly and remotely. The MBP would back up to the TC and to one or two of the external hard drives - one being attached to the Mac via USB and the other being attached to the TC's USB port. We would back up the important data on the TC using SuperDuper and copy it to both external USB drives.
    So , first of all, is that a sensible configuration? Should the 'server' be the one of the external hard drives attached to the TC USB port, backed up regularly to the TC using SuperDuper?

    But when you say 'So using USB drive does make sense if you want to use it as a file store', do you mean a USB drive plugged into the TC? I hope that I can attach an external drive to the TC so we can all access and read/write the content wirelessly via the TC network or remotely.
    Yes, USB.. as it prevents the sparsebundle mixing with data files. I guess it does depend on how much data you are talking about.. you can use the TC internal disk if you are careful and setup the sparsebundle with fixed sizes once you create them..
    And to be clear, I wasn't planning on backing up remotely via BTMM - only to access the shared folders on the TC data drive or USB external drive attached to it. I'm assuming that's ok?
    Yes, that is fine. Sorry I got the impression you were going to do backup over internet.
    What is the alternative? Having a Mac Mini that's always on? Do I need OS X Server etc.?
    A mini would be great.. you don't need server edition.. but I would see how the TC goes.. since you have it and it is much lower power consumption device. It is just that its design is not really for file storage.
    One big problem I have is to do with the sharing permissions. For everything on the TC or attached external drive attached to it, it says I have only custom access and every time I try to change permissions it says I don't have the permission to do that. And if I try to change the owner it says my user name is not valid.
    How is the security setup on the TC?
    The security is a bit tricky.. I must admit since I run windows computer in the network, that I simply turn on the guest account to read and write access. For a business setup that might not be adequate  but it allows me full access to all the files.
    If you setup the TC with user accounts then you are in trouble. That makes it very difficult to access, especially if one person already has the file open you may find a second user cannot login. I am not sure as I have avoided the security. IMHO it is meaningless.. since anyone with physical access to the TC can press the reset for one second and has full access.. and can add or change passwords.

  • Since I've upgraded to Maverick the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    Since I've upgraded to Maverick on my Macbook Pro the airpot utility does not recognise that there is a time capsule on the wireless network. I can see the TC using the air port utility on my iPhone5 and on my iPad. What am I doing wrong on my macbook?

    I have over 250G backed up and I really don't want to reset everything and start again.
    Not sure what you mean here. 
    A reset will not affect any of the data on the Time Capsule hard drive.  You would have to perform a completely separate and very deliberate Erase Disk operation for that to occur.
    I'm not recommending that you perform a default reset, but it is an option if there is really nothing else to try.
    I don't know if what you are seeing is a Mavericks issue or not, since I refuse to use any new software until at least the first major update with fixes comes along.
    Another user may be able to offer more input on Mavericks.

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

  • Can time capsule be connected wirelessly and still use ethernet ports for other devices?

    can time capsule be connected wirelessly and still use ethernet ports for other devices? we have it connected wirelessly but devices connected to the ethernet ports are not working.

    Not as an additional router.. the TC will be plugged into the main router via ethernet (or ethernet equivalent)..
    Then the TC is setup in bridge mode. It will simply act as a Switch and HDD.
    The wireless can be setup in a number of ways.
    From your convenience point of view use it in roaming network mode..
    you simply give the TC the same Wireless Name as the existing routers SSID.
    Same security setting and password. WPA2 Personal = WPA2 AES which is the best.
    But they both use different wireless channels.. normally if you leave the TC on auto it will work fine, but I prefer to control the network.. so set the main router to say 1 and the TC to 11.
    You can also use a completely different wireless name etc.. that is up to you. It is still a single flat network and the only thing that is important is only having one router.

  • Can I regard a time capsule as a wireless external hard drive?, Can I regard a time capsule as a wireless external hard drive?

    Can I just regard a time capsule as a wireless external drive? I don't think I need time machine to back up, I just want more space to store my files (music, moves, photos). To save the space on my Mac, can I move those things to TC, and open them(watch movies, photos and listen to music) directly?
    And, if I bootcamp windows 8 os, can I still share/use the stuff on the TC, like a regular(wireless) external hard drive?

    Apple says specifically not to move iphoto to network drive.
    iphoto network no no.
    http://support.apple.com/kb/HT1198
    It's recommended that you store your iPhoto library on a locally mounted hard drive. Storing your iPhoto library on a network share can lead to poor performance, data corruption, or data loss.

  • Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files but still have them on the TC for future reference..

    Okay so I set up my Time Capsule already and is now backing up 2 of my iMacs. Works great. What I want to know is how to use the TC to directly store files? I want to do this to delete some files on iMac 20inch but still have them on the TC for future reference..eg some movies on iTunes. I want to directly save them on the drive so I can delete them from iTunes and gain some storage. (Ps on iMac 20 inch (it's almost full - 320 GB) when I enter time machine, a tab comes up on finder which reads "Time Machine backups" it's able to be ejected like a disc or a connected device. On the iMac 20 inch, I dragged some files onto there as if using it like a hard drive. Is this the correct method? Then I went to my 27inch iMac and saw the "Time Machine Backups" hoping to see the files I dragged from the 20inch iMac. But the files were not there except a folder that said "Backups.backupdb". Can someone help me?

    It's not a good idea to use a network disk for both Time Machine backups and other things.  By design Time Machine will eventually consume all the space on its output disk, which will then cause problem for your other files.  I'd store those other files on an external disk connected to the Time Capsule.  The problem with that is that Time Machine will only back up files that are local to your Mac.  That means that you'll only have one copy of the files on or attached to your Time Capsule.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Time Capsule vs Lacie Wireless Space vs ?

    Hi folks,
    I'm a new proud owner of a 11.6" Macbook Air. I'd like to migrate to it fully from my 17" Macbook Pro, but to do so, I'd like to migrate my music to a NAS, ideally one that could also perform Time Machine backups. I have a wifi-only setup at home right now, with an airport express plugged into my cable modem, and I'd like to stay wifi-only (I rent, and want to run no wires). So either a Time Capsule or the new Lacie Wireless Space (http://www.lacie.com/us/products/product.htm?pid=11565) look to be the perfect options for me. I'd love to go with a Time Capsule, but the reported reliability issues scare me away from them.
    So, my questions-
    1) Has Apple improved the Time Capsule enough to where it can get a confident buy?
    2) Does anyone have experience with the Lacie NAS options to recommend them?
    3) Any other ideas?
    This is a real head-scratcher for me, and I'd appreciate some input.
    Thanks!
    sam

    I too am exploring the options of Space vs Time Capsule.
    Just read "LaCie's unit is mostly limited by its dependence on single-band 802.11n instead of the Time Capsule's dual-band wireless support."
    Read more: http://www.electronista.com/articles/10/09/16/lacie.wireless.space.merges.router .and.nas/#ixzz171BUKjy0
    Also: "It’s compatible with UPnP/DLNA and iTunes, and you can stream music, movies and photos from a central location and play them on any device.
    Moreover, the Wireless Space is Time Machine compatible, so Mac users can use it as a target for their automatic backups and be confident that all important files and media are safely protected."
    http://www.techdaring.com/2010/09/18/lacie-wireless-space-takes-on-time-capsule- doubles-as-nas-and-wlan-router/
    Regarding failures, I read about the Time Capsule failures and experienced Lacie failures (I've replaced three power supplies on my Lacie d2s, and we just had to send back for a Lacie replacement of my son's d2, less than a year old. So reliability is an issue sometimes no matter where you go. Get a good warranty. Lacie makes such solid products (and backs up there products; one power supply was out of warranty) that I've stuck with them (and my wondering has cost me; I have an Iomega Ultramax that won't wake up sometimes when it goes to sleep, though my Iomega portable eGo has been flawless).
    We tried an Airport Extreme a year ago and it just works out of the box; practically no setup. But I have an Airport Express that just up and died after about 2.5 years.
    I'd say they were comparably priced for what they each offer, with Apple a bit of a premium overall, and probably a bit more of a premium product to go with the price.
    I'm torn. I'd save cash and go with the Lacie, but seeing I plan to use it as a portable NAS and the Time Capsule has a built in power supply it would be easier to carry.
    Decisions, decisions.
    Message was edited by: Dancin' Brook

  • Can I Partition a Time Capsule? and more...

    My existing setup consists of an Airport Extreme wirelessly supporting 2 MacBooks ("MBs") 5 iOS devices, 2 WiFi/Airprint printers and then by wire (Ethernet) a couple of other devices.  In addition, the Extreme has a USB external hard drive visible/accessible to both MBs. Both MBs have their own external hard drives configured as Time Machines. All devices have latest software upgrades/updates.
    I am thinking of replacing the Extreme with a 3TB Time Capsule ("TC") and I propose to Partition the TC's drive into 3 – with one partition supporting MB1's TM, the second supporting MB2's TM, and the third partition supporting/acting like a common hard drive (the same as exists external on the Extreme).  The existing external hard drives acting as TMs would be set aside and saved for TM recoveries; the TC situate TMs would simply commence as new TMs (I envision difficulties not worth the effort in moving the existing TM backups to the TC).
    Query 1:  Can the latest 3TB Time Capsule be partitioned as I have proposed? (The reason I pose the question is a series of discussions dating back to 2012 that indicate a TC cannot be partitioned but the current Apple Store page for the 3TB TC  indicates a TC can support multiple TMs:  "you can back up all the Mac computers in your home to a central location.") A review indicates the TC established at least two TMs automatically, but I'd like to also dedicate some space for a third partition non-TM drive….so, the Q – can I partition a TC?
    Query 2:  Would I just be better off not trying to partition the TC and just letting it support two TMs automatically and plugging in a separate hard drive, as I currently have?  (Why hasn't Apple upgraded the USB connection to 3.0? oh, well, they probably will a month after I buy mine, right?  )
    Query 3:  When moving the existing MBs from desk to couch it is necessary to first eject the existing TM external hard drives. If the TMs are moved to (or replaced by) a TC that would appear to no longer be necessary – because they aren't physically connected anyway. (Having typed this it seems so obvious, but….I'm asking because I just want to confirm.)
    Any other suggestions/observations/watch-its would be welcomed. Thanks.

    Query 1:  Can the latest 3TB Time Capsule be partitioned as I have proposed? (The reason I pose the question is a series of discussions dating back to 2012 that indicate a TC cannot be partitioned but the current Apple Store page for the 3TB TC  indicates a TC can support multiple TMs:  "you can back up all the Mac computers in your home to a central
    The Time Capsule drive cannot be partitioned in a traditional sense unless you pull the drive from the Time Capsule (which voids the warranty), place the drive in a SATA to USB caddy or enclosure, attach the caddy directly to a Mac, and then use Disk Utility for the formatting operation. Once that is done, then you have to reinstall the drive back in the Time Capsule.  Not a job for the faint of heart....and best left to a technician.
    The Time Capsule "as is", can support multiple Time Machine backups from different Macs, but is basically a free for all as far as space is concerned. Time Machine backs up to a special file called a sparsebundle on the Time Capsule, and while it is possible to modify or limit the size of the sparsebundle file for each Mac, it is a complex operation. This document will give you an idea of the process:
    http://pondini.org/TM/A8.html
    Query 2:  Would I just be better off not trying to partition the TC and just letting it support two TMs automatically and plugging in a separate hard drive, as I currently have?
    Much simpler, therefore much better to do it this way.
    Query 3:  When moving the existing MBs from desk to couch it is necessary to first eject the existing TM external hard drives. If the TMs are moved to (or replaced by) a TC that would appear to no longer be necessary – because they aren't physically connected anyway. (Having typed this it seems so obvious, but….I'm asking because I just want to confirm.)
    Time Machine will automatically back up to the Time Capsule once you have it set up. No need to mount, or eject the drive, etc.
    Any other suggestions/observations/watch-its would be welcomed.
    The current version of the Time Capsule will be two years old in June....and Apple traditionally introduces new products in June.

  • Airport Time Capsule stop send wireless signal, Airport Time Capsule stop send wireless signal

    After instaling several times, alway after a while the wireless router stop sending the signal, or does not start up like in the morning, especially from a windown computer.
    Out house have several computers in Windows and Mac, iphones and ipads and itouch mac book pro,
    How come the router will not start up after a "night of rest"

    Unfortunately, a solid amber is light is not a good sign.
    Try a complete Factory Default Reset on the Time Capsule using the steps below. This procedure will not affect any of the data that you have stored on the internal hard drive.
    Power off the Time Capsule for 15-20 minutes or longer
    Hold in the reset button on the back of the Time Capsule first, and keep holding for an additional 9-10 seconds while you simultaneously plug the power back in to the Time Capsule
    Release the reset button after the 9-10 hold period and allow a full minute for the Time Capsule to restart
    The Time Capsule light should normally stay solid amber for about 30 seconds and then change to a slow, blinking amber light, indicating that the Time Capsule has been reset and it can now be reconfigured.
    If you try the Factory Default Reset a few times and the light stays solid amber, unfortunately the hard drive has failed, or there is an internal power supply issue with the Time Capsule.
    You should take the Time Capsule to an Apple Store.....if you have one in your area.....or contact Apple Support directly to discuss your options. 
    http://www.apple.com/support/contact/
    If the Time Capsule is out of warranty or not covered by AppleCare, Apple will not offer repairs but there are some shops that specialize in this type of repair. See this link for more details:
    Apple Time Capsule Repairers

  • Time Capsule not producing wireless signal

    We have a time capsule serving as our main wireless for the house and it recently stopped producing a wireless signal and has a solid amber light. I've tried leaving it unplugged and I've tried resetting the device. Neither of those plans had any effect at all. How can I fix this?
    I believe my wife bought this in 09 and its got a 2 TB hard drive. Not sure which version that makes this.

    Unfortunately, a solid amber is light is not a good sign.
    Try a complete Factory Default Reset on the Time Capsule using the steps below. This procedure will not affect any of the data that you have stored on the internal hard drive.
    Power off the Time Capsule for 15-20 minutes or longer
    Hold in the reset button on the back of the Time Capsule first, and keep holding for an additional 9-10 seconds while you simultaneously plug the power back in to the Time Capsule
    Release the reset button after the 9-10 hold period and allow a full minute for the Time Capsule to restart
    The Time Capsule light should normally stay solid amber for about 30 seconds and then change to a slow, blinking amber light, indicating that the Time Capsule has been reset and it can now be reconfigured.
    If you try the Factory Default Reset a few times and the light stays solid amber, unfortunately the hard drive has failed, or there is an internal power supply issue with the Time Capsule.
    You should take the Time Capsule to an Apple Store.....if you have one in your area.....or contact Apple Support directly to discuss your options. 
    http://www.apple.com/support/contact/
    If the Time Capsule is out of warranty or not covered by AppleCare, Apple will not offer repairs but there are some shops that specialize in this type of repair. See this link for more details:
    Apple Time Capsule Repairers

Maybe you are looking for

  • Can I use QuickTime in Flash application?

    Hi. I'm planning to develop a media player in Flash, and I would like to know if it is possible to do the things I wanna do. Can I use the QuickTime player in my Flash application to play video and music files? If I can, can I use the original contro

  • Crystal Report Viewer Control 11.5

    I have Crystal 2008 but I need to be able to use the Crystal Report Viewer when viewing reports through a website. I have the activex in my AddOn Manager but when I view the files in my Downloaded files folder the viewer control is not there. How do

  • Providing datasource for authentication in weblogic

    Hi, I am facing a problem of authentication of user from weblogic when weblogic have mulitple datasources My weblogic server have two data sources one is pmr and second is hr I have created two authentication providers one is using hr as data source

  • Outlook Express / day & date

    Hello, I am using Outlook Express 5.0.6 with OS9.2.2. Is there anyone who can tell me how to make my e-mails show the day & date when I print ? It used to do this, but we dont know why it stopped doing it. Currently, when I print an e-mail, all that

  • How to change ACPI settings

    The BIOS version for my T61 is 2.26. I want to know where I can change the ACPI settings in BIOS. I cannot find it under Power. Besides, does it support S1/POS option? Thanks in advance.