Time Capsule Wan Speed to slow for my Broadband speed

I found a topic about the Wan Speed but can't reply in that topic anymore so a new topic.
http://discussions.apple.com/message.jspa?messageID=11735111#11735111
My dualband TC is only capable of giving me 70-80 Mbit/s of the 120 Mbit/s I'm getting from my provider. I've upgraded to CAT6 cables but that didn't gave me anything more up till now.
My WAN connection is set to automatic in the TC settings. Would it help if I choose for 1000 Full duplex manual??? Can test this soon enough but did anyone have similar problems with WAN Speed?
I have quite some port forwards to my Mailserver and stuff. I tried with factory defaults TC and that gave me only one test with around a peak of 100 Mbit/s on a rare occasion.
Up till now happy TC user but this is strange with everything on Gigabit ports you would expect more of the hardware... Also the reference to 400 Mbit/s on the WAN for an AEB would suggest more from a TC wouldn't it??

Hi fogofortitude!
I have a couple of articles that I believe will help you troubleshoot this issue a little further. The first is a quick assist article for Wi-Fi, and can be found here:
Wi-Fi Quick Assist
http://support.apple.com/kb/ht1145
You can also refer to this article for more issue on troubleshooting Wi-Fi connections:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
And be sure to note the recommended Wi-Fi settings linked in that article:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Similar Messages

Time Capsule external drive very slow for backup

I am experiencing very, very slow backup times using an external drive attached to my Time Capsule. When I recently added a 3 TB Rocstor external drive to my mid-2011 iMac using FireWire, I included it in the drives to be backed up. The internal 2 TB of storage in my Time Capsule was no longer enough, so I plugged a 4 TB WD My Book Studio drive into the Time Capsule's USB 2.0 port and specified this WD drive as the only backup storage. The first backup took almost 48 hours. Now the Time Machine keeps trying to back up about 400 GB - 500 GB (though there haven't been any changes) and is transferring about 400 KB/sec over Ethernet from my iMac to the Time Capsule's external drive. What am I doing wrong? (I recently upgraded the iMac to OS X 10.10.2 Yosemite.)

Frankly, I have no way to gauge your network setup, so I can't really tell you what you should expect. I can tell you from my own experiences using a local network based on a 3rd Gen. Gigabit Ethernet AEBS that using Ethernet the average throughput (not interface) was in the neighborhood of 16-20 MBs/sec. The average throughput for a USB 2.0 drive connected directly was about the same.
This works out to an average throughput of around 60 GBs/hour. Depending upon file sizes and number of files being transferred a USB 2.0 drive might reach 100 GBs/hour, but that is a rare outcome. The USB 2.0 drive interface speed is about the same as FireWire 400 - 400 Mb/s or roughly 50 MBs/sec. This is what I know from measurement. Do not expect Ethernet to be any faster for throughput.

Using external hard drive on a Time Capsule as a network drive for PCs.

I own a Macbook Air and am using a 2TB Time Capsule router. I am currently using for automatic backups for my Macbook Air.
I also own 2 PC laptops for the rest of the family. Would it be possible to use an external hard drive connected to the USB port of the Time Capsule as a network drive for the PCs? I want to share files between the two PCs.
Thanks

Yes, you can do that.. although it is not necessarily as straight forward as you might think it should be.
1. The TC has to be running SMB compatible names. short, no spaces, pure alphanumeric.
2. The disk must be formatted to file system the TC can read. HFS+ or Fat32.. but the HFS+ is vastly superior.. the actual format is irrelevant from sharing point of view as it is still shared via SMB to the network.
3. It is slow.. half the speed of the same drive plugged into your computer.. although if the connection is over wireless that is probably irrelevant.
4. You might need a powered hub to get the drive to work.. Apple underpower the USB.. and even a powered disk still won't work.
5. There are some issues with the TC getting the USB drive to work.. too many factors to say you will have issues or not.. but be aware this is not as straight forward as it could be. or should be.
6. If you want to share files.. you can always share them directly.. pc to pc or pc to mac.. there is no necessity to do it via a network store.. You can also use the 2TB internal drive.. create a disk image and you can then store you data in that. Internal drive is much more reliable and faster.
See http://pondini.org/TM/TCQ3.html

Time Capsule Disk is very slow

Hello,
I'm using 10.8.2 and I just bought a Time Capsule 2TB for my backups.
I have tried to use Time Machine to backup my data (about 200GB) via our wifi network. My MBP (Retina mid 2012) stands at a distance of 2 meters from the Time Capsule.
It took about 16 hours and at 90% it crashed.
After that I used Carbon Copy Cloner to backup my data manually. I think I will go on with this methode, because I will have instant access to my data.
CCC did the backup a bit faster (about 12-13 hours). Copying other files to the Time Capsule Disk is also slow (about 7-8 GB per hour). Navigating is also slow.
I turned off Spotlight completely without a difference in copying speed.
I think (and I hope) this Time Capsule disk could be faster. Is this a bug? Are there workarounds?
Thanks a lot!

-To sum up things: The setting "DHCP + NAT" delivers fast copying speeds
Yes. You will eliminate the backroute to the fiber modem or maybe even back to your ISP - depending on their setup.
The standard setting of the router is "DHCP + NAT" right?
Normally the standard setting is good enough to obtain an internet connection instantly (without filling in IP, DNS etc. manually).
Yes, you shoudl not have to fill in those details. Should work straight away as your MBP gets thos edetails automatically (yes?)
best to reset the Airport Extreme to defaults and connect it again using DHCP / NAT

Just installed new Time Capsule, wifi now very slow, what amI doing wrong?

Just installed new Time Capsule, wifi now very slow, what am I doing wrong?

It's possible the reason it seems so slow, is that a backup might be in progress - and since it's the first backup everything on the disk is something that Time Machine is backing up and is being transferred across the WiFi at the same time as you're trying to use your Internet. So you're competing with Time Machine data flying across your WiFi along with your internet stuff. So if this is indeed what is happening (look at Time Machine to see if a backup is in progress), either pause the backup to a more convienent time or live with the slowness till the backup is done this first time, and after that you probably will not notice the "competition" on your WiFi. I like to schedule the Time Machine backups to late at night rather than once an hour (the default), but that schedule should be whatever you feel most comfortable with.
There is a handy free utility called "TimeMachine Editor" that you can get from http://timesoftware.free.fr/timemachineeditor/ that lets you create your own customized backup schedule. You can create several schedules to fit your working conditions. I've used it for several years with never a problem. I don't have anything to do with the company - just a happy user.
Good luck...

In time capsule, can ethernet ports used for windows pc as a LAN?

in time capsule, can ethernet ports used for windows pc as a LAN?

i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Connect time capsule via ethernet to Mac for back-up only. Is it possible without internet connection ?

Hi Bob,
I'm not certain the post I sent was posted correctly, as I added it as a reply to a 3-year old thread. Since this is a recently-active thread, though not specific to the issue at hand, I thought I'd post again:
Three years ago you helped me set up a roaming wireless network in my home. It's been rock-steady and I'm forever grateful to you for the time and guidance you gave me. I'd now like to swap out my AirPort Extreme base station for a time capsule. As I understand it, I should be able to unplug the base station and replace it with the TC without problem, so long as I use all the same settings on my TC... network name, security protocol, password, etc. Given the complexity of my network, I thought I should check with you first for any advice you might have. I don't want to set up a new network or make any changes to the existing one-- with the exception of using the TC in place of the AE. I'm already using Time Machine for backups. As a refresher, my current setup has the AE as base station and 3 expresses hard-wired with Ethernet connections elsewhere in my home. I have a 4th express set up wirelessly to use with my stereo system at the front of the house. All AXs are 'n's and are set up, as per your instructions, in Bridge mode to extend the existing network. I'm running the most updated version of Mavericks on my MBPro. Any suggestions you might have will be, as always, very much appreciated! Sincerely, Phyllis Sommers

How to put time capsule AP in 40 MHz (for 2.4G)

Hello,
Can anybody help me in putting time capsule AP in 40 MHz (for 2.4G). I am able to put 40MHz in 5G using airport utility in XP by checking use width channel.
Thanks in advance,
Vishal

Can anybody help me in putting time capsule AP in 40 MHz (for 2.4G).
Sorry, but this is not possible as the Time Capsule does not support wide channels on the 2.4 GHz radio.

Time Capsule + Airport Express (no password for extended guest network)

Hi guys,
I´m using at home an Time Capsule combined with an Airport Express for extended range.
I´ve activated the Guest Network on the Time Capsule, using an WPA2 Password for it.
Problem is, the Airport Express is extending both the regular network and the guest network, but there´s no password set for the extended guest network.
So basically there are 4 networks, 3 are properly secured (TC regular and guest and AE regular) but I can´t set a password for the Guest Network that´s being extended by the Airport Express.
I have looked everywhere on the AirPort Utility with no luck whatsoever.
I appreciate any help on this.
Kainan-Maki.

Time Capsule and Airport Express, Windows 7
So you don't have a Mac or even iOS device to setup the TC and express?
This addition of extending guest is new in later firmware.. but you need the 6.2 utility to control it.. AFAIK.

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance. Of a sledgehammer, open the device and attempt to recover your files by force!???

How can a company sell a Times Capsule appliance as a solution for backup and die for this manufacturing fault? And with that Apple? nothing, or technical assistance in Brasil. Of a sledgehammer, open the device and attempt to recover your files by force!???

Heat up the bottom rubber mat with a hairdryer for 5-10 minutes to loosen the adhesive, then pull the rubber mat away from the bottom metal plate carefully.
Then use a screwdriver to remove the 10-12 screws to open up the case.

Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?

Can you use Time Capsule as a print server for printers connected via Ethernet or wirelessly?
I know that it works marvelous for printers connected via USB, but I'd like to know if you can use it as a more general print server.

No, you can't, but what do you expect to gain by doing so?
The main advantage of the print server is to provide multi-user network access to a printer that typically only supports a single connection. Since, by definition, your printer already has a network connection and can be used by multiple users.

I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal ?

I presently have a linksys wifi router, can i connect a time capsule through cat 5 cable for my apple products and to boost my signal .i live in a three story home and my linksys is in the basement. I have one cable on the top floor where most of my computers/ipads are.

can i connect a time capsule through cat 5 cable for my apple products and to boost my signal
Yes, configure the Time Capsule to create a wireless network using the exact same wireless network name and password as the Linksys wireless network.

We use a time capsule as the wireless router for our house. We cannot get service to the whole house. Is there anyway to boost the signal?

We use a 2TB Time Capsule as our wireless airport for the whole house but we can't get the signal to all rooms. Is there anyway to boost the signal?

You to purchase an extreme or express and use it as wrieless extender.. that is the only way Apple provided for boosting the signal.

I've extended my Time Capsule wifi via Airport Express and the download speed is still super slow

I get an average of 80Mbps download speed when close to the Time Capsule. When I got upstairs in the house the download speed drastically drops. So I decided to extend the wifi range using an Airport Express. See image below. I've placed the Express router upstairs in the house and when I stand close to the Express I get a very slow download speed. About 7Mbps. Even slower than when I hadn't "extended" the range. What's going on...?

I've placed the Express router upstairs in the house and when I stand close to the Express I get a very slow download speed. About 7Mbps. Even slower than when I hadn't "extended" the range. What's going on...?
Well, the first rule that you need to remember is that when you "extend" using wireless.....you will have a drop in the potential speed on the network. So, while you might have more "range" for the network, the network speed will drop. Nothing that you can really do about that other than connect the Time Capsule and AirPort Express using a wired Ethernet connection. There will be no speed loss over the Ethernet cable, so the Express should deliver approximately the same speed as the Time Capsule.
The next rule is that when a device "extends" using wireless, it can only extend the quality and speed of the signal that it receives. A speed "boost" will not appear.
Try locating the Express about half way between the Time Capsule and the area that needs more wireless coverage. Anything that you can do to minimize obstructions between the Time Capsule and Express and on to the other area will help.....but you will never get close to the performance of connecting the AirPorts using an wired Ethernet cable.
Unfortunately, Apple really doesn't tell you very clearly, if at all, about important things like the two rules above.

4Th Generation Time Capsule Running Backup very Slow

I am having a problem with my 4th generation time capsule as it is running very slow , it shows that i need to backup 151 Gb data and for the last 2 days the device backup only 150 mb, pls advise what is the problem? setup of the wireless network seems fine to me without any problem
please help

When you use ethernet, make sure your wireless is turned off in the computer.
It can be worthwhile isolating the TC to the Computer so there is nothing else happening.
Also for Mavericks ensure you have ipv6 set correctly to link-local.
A 100GB backup certainly should not take 20hours..
Although the 2008 (gen1 TC is much slower than later versions).
A first backup of the computer must deal with loads and loads of little files, as a warning can go slow.
A different backup software will be just the same.. it is the speed over network and handling small files that is the issue. Once that first backup is done the later incrementals should not be a problem though.

Time Capsule Wan Speed to slow for my Broadband speed

Similar Messages

Maybe you are looking for