Time Capsule which will only let me connect to one device at a time. Anyone else experience this?

I have a Time Capsule which I use with a Macbook Pro and an iMac, as well as my iPhone and an Airport Express. It appears as though it will currently only allow me to connect to one device at a time. I had my MBP and iMac sitting side by side and ran Aiport Utility on both. The Time Capsule would only show up on one or the other but not both. Anyone else experience this? It was working great until a day or so ago.

It sounds as if your Time Capsule is in "Bridge Mode", which would only allow one device to connect to the Internet at a time.
To check......
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Manual Setup
Click the Internet icon
Check the setting for Connection Sharing
If it is "Off (Bridge Mode)", change it to "Share a public IP address"
Click Update to save your changes

Similar Messages

Airport will only give a signal to one device at a time

Went to access internet from Iphone. Iphone would connect and show good signal strength but not work. Imac was working. After resetting and unplugging cables I got the Iphone to work only to turn around and find the Imac not working. It seems I can fix the problem by unplugging the cat 5 cable from router that feeds the airport. Devices continue to work unless i leave the covered area or it somehow looses its connection overnight. I cant tell if I have a bad router, airport or cable? If I plug the cable from the router directly into the computer it works as it should. Any guesses?

Please post screenshots of the setup of the Airport.
I strongly recommend you reset it to factory and start over.
The Factory Reset universal
Unplug your TC/AE. Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. The time is not important.. it is the front LED rapid flashing that indicates you are in factory mode.
Release reset.
If it doesn’t flash rapidly you have released reset at some point and try again.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
When you do the setup take particular note of the names that are recommended by the utility to use.. and DO NOT USE THEM.
Use names that are short, no spaces and pure alphanumeric .. eg AEgenx and wifi name AEwifi
Then show me in screenshots what the problem is.
I do not know the modem you use.. all I am interested in is the WAN setup so please show me that in the AE.

Since upgrading to Mavericks my mail will only allow me to choose one recipient at a time unlike previous OSX which would allow me to choose multiple recipients at once.

Since upgrading to Mavericks my mail will only allow me to choose one recipient at a time unlike previous OSX which would allow me to choose multiple recipients at once.

Open a message-editing window and select
View ▹ Customize Toolbar...
from the menu bar. From the sheet that opens, drag the button labeled Address upward (not downward) into the toolbar if it's not already there, then click Done.
Click the button to see a list of your contacts. You can make multiple selections.

I downloaded Lion and have attempted to 'updat' it from apps to my imac... after 3 hours of uploading it show mw an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

I downloaded Lion and have attempted to 'update' it from apps to my imac... after 3 hours of uploading it show me an error message saying there's something wrong with my internet connection... which there is not. Anyone else experience this?

What type of Internet connection do you have? How fast is it?

I keep getting the message "The backup disk image "/Volumes/Donald Baker's Time Capsul/Donald Baker's iMac.sparsebundle" could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

I keep getting the message "The backup disk image “/Volumes/Donald Baker's Time Capsul/Donald Baker’s iMac.sparsebundle” could not be accessed (error -1). does anyone know what this means? My time capsule refuses to back up.

Time Capsule and Time Machine master guru Pondini has all the answers.
Check # C17 in his excellent support document Time Machine -- Troubleshooting.
http://Pondini.org/TM/Troubleshooting.html

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx

My macbook pro (August 2010) keeps freezing when apple mail starts up. This happens every 2nd time I turn on my Macbook Pro. This forces me to hold down the power button to restart my Macbook Pro. Does anyone else experience this, and is there a fix? Thx.
since upgrading to OS lion, my mac book pro (2010 August) keeps freezing (non responsive, requires restart) when i turn on my mac and the system is trying to open apple mail. while apple mail is attempting to collect new mail, the macbook pro freezes. this happens every 2nd time i try to start up my computer. this only started happening after i upgraded to OS lion. please let me know what I need to do to fix this. being forced to restart every 2nd time i turn on my macbook pro has been very frustrating. not sure if apple mail is also the cause of my macbook pro for being very slow during start-up (on the occasion the computer doesn't freeze).

I am having similar 'freezing' problems with many programs (Mail, Safari, iTunes, etc.). I have done a clean install of Lion instead of an upgrade when it came out. Perhaps something went wrong with my install? I'm thinking about wiping and reinstalling.

On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?

On my G5 mac at work, I am getting - don't know what to call it - looks like extraneous matrix type code around prompt windows and in applications. Sometimes I will get large shapes of colors, yellows, magentas, cyans. Anyone else experience this?
I will attach a recent screen shot of a print window I opened and the extra code is above and below the window. There are matrix type blocks of code and then lines under the window. I get this all the time and it is getting worse.
Any help to get rid of it would be appreciated.
Thanks
TatteredSkull

It's likely the Video card, or possibly heat.
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
If you have any temps in the 70°C/160°F range, that's likely it.

My iTunes password will update some of my Apps on iPad but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?

My iTunes password will update some of my Apps but not all of them. When I try to update the remaining ones, my password expires. I've just created 5th PW. Does anyone else experience this?

- Try going to Setings>Store and sign out of the account and then sign back in.
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears

HT1695 Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?

Since i upgraded to ios 6, I am having trouble stayong connected to wifi networks I connected to on my iPhone 4S .. anyone else have this issue ?

I sometimes experience the same issue. But not only in 6.1 but also in previous versions

Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!

Hi, I have just purchased a new Macbook Pro. Whenever I try and buy anything on the internet (via Safari) on any website it will not allow me to add products to checkout. Has anyone else experienced this problem or can suggest a fix? Many thanks!

On all shopping sites, or only some? What happens when you try?

In the last 2-3 weeks, if I leave my iMac idle (Snow Leopard 10.6.8), it will log itself off.....anyone else experience this?

In the last 2-3 weeks, if I leave my iMac idle (Snow Leopard 10.6.8), it will log itself off.....anyone else experience this?

Do you have "Log out after nn minutes of inactivity enabled in System Preferences -> Security ?

HT1379 my internet connection is incredibly slow - I know it is not the fault of the modem as other devices are fast. This article was suggested to me as a solution. I think they were just trying to get me off their back. Anyone else experience this?

my internet connection is incredibly slow - I know it is not the fault of the modem as other devices are fast. This article was suggested to me as a solution. I think they were just trying to get me off their back. Anyone else experience this?

If Safari is getting very slow:
(Presumably you regularly empty your Safari cache by deleting the following file:
Home/Library/Caches/com.apple.Safari/cache.db
and clear your History)
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home-solutions ) and further independent information can be read here:
http://reviews.cnet.com/8301-13727_7-57338784-263/free-dnscrypt-tool-enhances-ma c-web-security/?tag=mncol;txt
and here:
http://www.macworld.com/article/1146064/troubleshootdns.html?t=234
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)
Sometimes reversing the order of the DNS numbers can be beneficial in cases where there is a long delay before web pages start to load, and then suddenly load at normal speed:
http://support.apple.com/kb/TS2296
If your computer is part of a network:please refer to this page: http://www.opendns.com/start/best_practices/#your_network and follow the advice given.
If you use a Router, make sure it has the latest firmware installed.
One reason for a slowness in page loading may be the 'DNS Pre-fetching' feature of Safari 5.x as is described here:
http://support.apple.com/kb/TS3408?viewlocale=en_US
You can cancel DNS pre-fetching by going to Terminal and typing:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
You have to restart Safari for it to take effect.
If Safari seems to hang for ages:
If you have a lot of tabs open and/or a lot of pages running Flash, Safari can sometimes 'hang', requiring a restart of Safari. This can often be inconvenient, and as it is rarely Safari itself that is hanging but merely one of its plug-ins, usually Flash, there is a way using Terminal to restart the plug-ins (without restarting Safari and losing your tabs) by quitting the WebPluginHost process:
Open the Terminal from the Utilities folder in /Applications and type
killall -9 WebKitPluginHost
Note that this command kills all Safari plug-ins, not just Flash. All plug-ins should start back up when you reload the page.
Then go back to Safari and refresh any pages that were using the Flash plug-in. This also fixes the Beachball of Death. Try this whenever Safari gets slow or freezes. The later versions of Flash 10.1 onwards appear to have improved the situation somewhat, but haven't completed eliminated it.
For this and other reasons Apple switched their websites to HTML5 in January 2011:
http://www.appleinsider.com/articles/11/01/26/apple_revamps_its_public_website_u sing_html5.html
For Snow Leopard/Lion users this should also be read:
http://support.apple.com/kb/TS3408

IPhone 4S problem: Speaker only makes 'electronic noise' with incoming calls.. Has anyone else experienced this problem ?

iPhone 4S problem: Speaker only makes 'electronic noise' with incoming calls.. Has anyone else experienced this problem ?

I've not experienced this. But I do appreciate your asking.
Did you want help with your technical issue? If so, why don't you ask. Also state what troubleshooting steps you've taken.

I am having tremendous difficulty sending simple voice text messages, or typed text messages to non I-phone users. Picture text messages will not send at all and can only be sent to other i-phone users. Is anyone else haing this problem ?? Big concern

Well this is stupid - I wrote the question above and now it is telling me the message is blank - how dumb is this.
I am having tremendous difficulty sending sipmle typed texts, voice texts and picture text messages to non I- phone users.
Simple text messages are sporadic and seem to be impacted by whether I incluse a subject or not - picture texts will not go at all.
Anyone else having this problem ???

It's a corporate phone so will need to check. Will not send text messages to non I-phones if they contain a "subject" or a picture. Wierd - regular voice or typed text messages are fine.

Ever since I updated to iOS 8 on iPhone 5, sometimes when I press the home button just once it will open the app switcher or even the assistive button. Anyone else have this problem? Is it an iOS 8 glitch? Please help - very annoying.

I updated to iOS 8 on my iPhone 5 yesterday and now when I press the home button even once, it opens the app switcher (which is supposed to only open after pressing the home button twice quickly). Sometimes pressing the home button once even brings up the assistive button (which for me should take three button presses). This did not happen before I updated my software. Has anyone else had this issue? Know how to stop it? Very annoying and at this point feel like I should have waited before I did the update.

Hello ..do you have a history on the phone? did you get it wet? was it dropped? have you been using an authentic ORIGINAL apple charging cable?
this problem occurs when there is a short circuit in the phone... you most likely got it wet at some point and maybe didnt even realize it? The moisture in the phone hasb probablly oxidized one or several capacitors, integrated chips thereby short circuiting the phone. that is why he phone is acting erratic because these short circuits inadvertently "activates" other circuits.. eventually the phone will not turn on anymore- the heat will stress the citcuit board and you will have discontinuity along your main power lines and the phone will cease to function..i see this alllll the time in our shop
the fact you upgraded to ios6 will even work the phone harder because its a more powerful operating system taking full advantage of the A4 chip..

Time Capsule which will only let me connect to one device at a time. Anyone else experience this?

Similar Messages

Maybe you are looking for