Time Capsule wifi signal suddenly fades with distance

My Time Capsule's wifi signal has suddenly started fading the farther I am from the box. If my Macbook Air is in the room with it, the signal is fine. But suddenly, if I'm two rooms over, the signal is very slow -- much too slow to stream video, for example. This is a relatively recent problem. I tried downgrading the firmware from 7.6.3 to 7.6.1 on the advice of someone on these boards but that hasn't helped. Any ideas?

After you downgrade the firmware. do a full factory reset of the TC.
Then redo the setup from scratch.. give it fully SMB compatible names,, short, no spaces and pure alphanumeric.
Eg TC name.. TC
Wireless name for 2.4ghz TC24ghz
Wireless name for 5ghz TC5ghz (yes, set a different name in options for this)
Do not hide the wireless name.
Use WPA2 Personal security with 10-20 character password is usually enough. pure alphanumeric of course.
Now the important bit. Test using fixed wireless channels.. 11, 6, 1 in that order for 2.4ghz.
5ghz is probably useless from 2 rooms away, but set to the lowest channel, 36 or 40.. will work better.
It is only because you have had it change that I recommend it.. otherwise I would say get something to extend wireless or more powerful. See  how the above goes.. and give us actual numbers.. in the airport icon on the top right hold the option key when you click it and you will get signal level.
If you want more info the older v5 utility is far more useful as it will give you logging of wireless signals.
All logging access is totally removed from v6 toyland utility.
So install v5 which is possible by a trick on Mountain Lion.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Similar Messages

  • Strength of Time Capsule WiFi Signal

    Dear Friends,
    I am using time capsule model A1409.
    In my opinion, the WiFi signal is not strong.
    In my office with the range about 10 meter with some office obstacle like wall partition from gypsum / calc not a brick partition, my mac book air can not get the WiFi signal from time capsule.
    Actually how much is the range coverage of tiome capsule signal?
    How to adjust the power of WiFi signal transmisiion from time capsule.
    Thank you.
    Regards, Andreas

    In my opinion, the WiFi signal is not strong.
    In my office with the range about 10 meter with some office obstacle like wall partition from gypsum / calc not a brick partition, my mac book air can not get the WiFi signal from time capsule.
    I agree.. it is very average.
    10M through enough walls.. especially in an office with metal filing cabinets and shelves can be worse than bricks..
    Power is by default 100% .. there is no way to turn it up.
    Make sure your region is set correctly.
    Apple intend you to buy Expresses to extend the wireless..
    In an office I would use ethernet and locate the TC near where the wireless is needed.. if you need more wireless power, use ubiquiti..
    When you go into the Apple store next time.. ask what wireless they use.. (hint.. it is not apple routers).

  • AE Time Capsule WiFi signal issues now??

    Hi folks,
    I bought the new AE Time Capsule when it first came out X number of months ago.
    I live in a small townhouse and never had any issues previously with my WiFi signal, even when I had just the AE base station. I noticed though over the past few days, it seems like one of my Airport Express will lose its WiFi signal and it is literally 15 feet from my AETC. Now using Google Chromecast that is less than 50 feet away from my AETC, the Chromecast device shows a 2 bar wifi signal instead of 4. I haven't moved anything and the only new updates in our house is iOS7 on our iPads, and iPhones.
    This past Sunday I know our Google Chromecast couldn't find the Chromecast device, which I know is a Google product. The reason for my posting here, then I noticed 1 of our AE being offline, while the other 2 seemed fine. I did swap out our cable modem from a Dlink modem to a Motorola SB6141 cable modem. Now last night, I also noticed our Belkin WeMo devices could not be found. Not sure what is going on, seems like only the past few days we are having WiFi issues... Is there something going on intermittently from the iOS7 upgrade?
    Something is going on??????? Please let me know your thoughts. When I reset the AETC everything seemed fine for a little while, everything came back online. However it seems last night (Monday night), the Belkin WeMo devices were taking a long time to populate. So I am having issues with our WiFi overall in our home using Apples AE, Belkins WeMo devices (we only have the plug switches) and Google Chromecast. The common item is all of these devices are wireless connections.

    I just wanted to confirm I had similar issues.  I am running a new AE router (tower model).  I have 2 WiFi networks in my house.  One runs off the AE and the other off a Netgear running DD-WRT (sharing the same broadband connection).  In recent weeks, my WeMo devices (total of 3) have not been displaying appropriately in the app.  Sometimes 1, 2, 3 or none.  WeMo and iPhone all on same AE network.  If I turn off WiFi on my iPhone and use 3G,all devices appear.
    I tried turning off my Netgear network and running everything through the AE and still no sucsess.
    So, I have recently turned off my AE and gone back to my Netgear DD-WRT.  I have had no issues now with my Wemo devices.
    I haven't had enough time to track this down any further but just thought I would share my experience.
    D

  • Time capsule wifi signal and possible extension by airport extreme

    Hi all,
    I recently got a TC to replace my speed touch dsl modem/router as I thought the TC is much better. Unfortunately to my surprise, the wifi signal of the TC seems to be less powerful + Internet is more slow. I wonder if I have some settings that are not quite correct. I wrecked my brain over the net looking for settings and everything seems correct. Any ideas on this issue?
    Anyway, I am now considering either an airport extreme or airport express to extend the coverage. My questions are:
    1. Is the wifi signal of airport extreme, airport express and time capsule the same or one is more powerful than others?
    2. I'm thinking of getting an airport extreme to be the main wifi hub (ie the adsl modem would be connected to it) and putnthe TC downstairs to extend the signal. With this in mind I would connect it to a western digital tv live and stream videos.
    Any feedback would be appreciated.
    Kind regards
    Aldo

    Apple needs to create a configuration tool that configures all the Apple devices one owns by creating a network diagram using drag and drop symbols...
    Sounds like a cool suggestion. If you want Apple to hear it, go to www.apple.com/feedback/timecapsule.html

  • Repeat time capsule wifi signal

    Hi,
    I have a TimeCapsule that I've setup as a Wifi hotspot in bridge mode.
    The TC is connected to the router with an ethernet wire and the router has no Wifi activated.
    However the TC's Wifi signal is not powerful enough and I'd like to repeat it using a Linksys WRE54G that I already own.
    Will that work, and how do I need to configure the Linksys repeater to make it work (IP address, mask and gateway).
    Should I use the IP adress of the TC as the gateway address?
    Thanks for your help.

    This discussion is pretty close to what you want to do.  The answer is probably no.  https://discussions.apple.com/message/23324301#23324301
    Have a nice day.

  • My time capsule wifi stops working several times per day

    In the last several weeks, my time capsule wifi will suddenly stop working. Both the guest and main networks  go down. I unplug the time capsule and plug it back in and then it works again for a while. My internet is ADSL. The signal comes in through a Actiontec Modem and then by ethernet to the time capsule which broadcasts the wifi.

    Not sure what you mean by "suddenly stop working".
    Does this mean the power indictor light on the Time Capsule goes off and then comes back on when you restart the Time Capsule?
    Or, does this mean that the power indicator light stays on, but devices cannot connect to the wireless network?
    If you are using an Actiontec modem/router and trying to run both "main" and "guest" networks on the Time Capsule, that is creating an error known as Double NAT.  Sometimes you can get away with this on a simple home network, but the better option would be to run the Time Capsule correctly in the "Off (Bridge Mode" setting.
    Unfortunately, the "guest" network will not operate correctly when the Time Capsule is in Bridge Mode.
    If your Actiontec device really is a modem/router or gateway....as we suspect.....the Double NAT error can cause loss of one or both networks, Can you post back with the model number of the Actiontec "modem" that you have so we can check out the possibility that you have an incorrect setup?

  • I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    I have a 1 TB Time Capsule on a wireless network with my iMac and my wife's MacBook Pro.  The TC is almost full. What is the best way/device to increase storage capacity?

    Replace the Time Capsule with one that has a larger hard drive. Or erase the one you have and start a new set of backups or backup one of the computers to a different backup drive.

  • Time Capsule WiFi disconnects when a Fujitsu Siemen Laptop with b/g network

    Time Capsule WiFi disconnects when a Windows Vista based Laptop with "b/g" network connects. When i use Macbook with "n" Network.
    Surprising that TC and MacBook both from Apple can't stay connected when Fujitsu Siemens Laptop joins through WiFi.
    I use a DSL Modem (Speed 1 Mbps) connected thru ethernet to Time Capsule on Bridge Mode.

    Yes, n is better, but if you have it running on b/g/n (since you have to with your b/g only notebooks) the n is inactive. Kind of a waste. Others have resorted to adding another wireless router which one set to b/g/n and the other n-only.

  • How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

    I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
    Thanks

    No more meseges.
    في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
    New discussion activity
    Bob Timmons has posted in the AirPort community.
    How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
    Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
    A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
    You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
    We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • How do I block an iPad app from hacking my Time Capsule WiFi?

    I have a 1st gen Time Capsule. I use it for my Wi-Fi signal in the house. A kid with an iPad has an app that keeps hacking my Wi-Fi password every time I change it. Is there a way for me to block that app from hacking my Wi-Fi? If so, how?
    Again, it is a 1st gen Time Capsule, and my computer is a mid-2007 iMac. I use WPA2 Personal for my wireless security. My password has letters, numbers, and special characters, and is not easily remembered. I had to write it down in case I need to enter it on a new wireless device, yet this kid just hacked right in.
    Any and all helpful info will obviously be greatly appreciated.
    Thanks

    A couple of things.
    The advice on the passwords above is good. FING recomendation was great as well - It's a great APP.
    https://itunes.apple.com/us/app/fing-network-scanner/id430921107?mt=8
    However, there is another possibility - Does he know your Time Capsule's Admin password? With that he can use an app to quickly get your WIFI password and get on the network. Have you tried changing the admin password.
    If you've installed this app: https://itunes.apple.com/us/app/airport-utility/id427276530?mt=8
    It will ask you for an admin password to access the Time Capsule. If you're using the same password each time for admin access then he can get access to the admin rights and there are ways of getting the password from there, quite easily.
    P.S. Change the password on your iMAC in case he has accessed it and installed a key logger. (There used to be physical keyloggers that would be discreetly put inline between the keyboard and the computer but I don't think there is one for Macs and with the advent of Bluetooth keyboards it's a moot point)
    <Link Edited by Host>

  • Time Capsule does not play nicely with Cisco Router

    Three days ago, I had an older Linksys router attached to our ISP's cable modem by ethernet; the network included a wireless time capsule and apple express base station set up by our son last year (who understands this stuff, but lives 2,000 miles distant).  The router died and I purchased a new Linksys router (E2500).  It is occupying the same spot as the old router, but running with no security settings as yet.  My wife's iMac and two Windows XP laptops work just fine on the network, as well as our NetFlix connection on our TV.  My MacPro, however, can not access the main network - it can see it but won't grab an IP address.  It will, however, see and connect to the router's guest account, although with reduced signal strength.  The Time Capsule is now connected to the MacPro by ethernet (if I make it wireless, it will back up fine, but I can't access Internet or send email on the guest account).  The AirPort Express is unplugged and not a factor.
    Yesterday, I spent most of the day on the phone with Cisco (who claimed AirPort Express will not work with their routers, which I know to be, um, less than accurate), and with Apple Support - who did not help (other than to set up a Genius Bar appointment this morning at the local Apple Store).  The Genius Bar turned out to be a disappointment as well - the MacPro with Time Capsule attached worked perfectly on the main network in the store, but at home, even with a test user account with Admin authority, as they suggested), no go.
    If I unpower Time Capsule, I loose Internet.  With Time Capsule plugged in, I can access my router's guest account -
    Aside from returning this router and starting fresh with a different brand router, any suggestions?
    Thanks for any guidance, suggestions, etc.

    My first reaction is to suggest you ring your son.. !!
    And I guess my second one, would be to remove the E2500, and connect the time capsule directly to the cable modem.. they are equivalent devices. The TC is an excellent wireless router and will work better as the primary router in your network. Turn off the cable modem so it can pick up the new device.. plug the TC directly to the cable modem then turn on both.
    Make sure the TC is working as router.. and you should be able to setup the wireless to connect all your computers etc.
    The E2500 can also be used as a WAP if you need more range. But be aware you have to make sure it uses a separate channel to the TC. Plug it in via ethernet to LAN port not WAN.. and turn off dhcp and set the IP to same IP range as the TC but make it outside the dhcp scope. So for example the TC is running 10.0.1.1 and then make the E2500 10.0.1.254
    The express cannot do WDS to the Linksys.. so what you were told is correct. It may be able to connect via ethernet but not as repeater. But you can do that with the TC now that it is the main router.

  • Time capsule wifi connectivity issues -apple tv 2 constantly disconnects from time capsule

    Having ongoing issues with Time capsule wifi connectivity throughout house. 
    Apple TV II and PS3 losing wifi connection on a regular basis causing movies/music/gaming to be interupted.
    Anyone have same issues and found a solution?

    I bought a Time Capsule this weekend and was having a similar problem whereby my MacBook Pro would disconnect regularly from the wi-fi signal. Previously my MacBook Pro held connection permanently to the previous router fine. It was a pain as I couldn't leave things like SugarSync / Dropbox running as they kept disconnecting. I seem to have fixed it though by using AirPort to manually set the 2.4Ghz channel to a hard-wired value (Manual Set-up->AirPort->Wireless->Radio Channel Selection->Edit ....) rather than letting it automatically select the channel. I used iStumbler to choose a channel that was not congested in my area. I'm hazarding a guess that maybe when the signal went weak for a second, it changed the channel when set to automatic and so knocked out any connections.
    Well, it worked for me.

  • Can I have my Time Capsule wifi and my Verizon router wifi on at the same time?

    I want to have my verizon wifi on at the same time as my time capsules wifi but I don't know if it interfere.  There's an app that you can use as a remote for your cable box but you need to be on your routers wifi.
    Thanks,
    Zach

    Suggest that you run a few speed checks on both wireless networks with a computer in same room as the wireless router using a site like www.speedtest.net on your browser.
    If you are getting close to your plan speeds, then you likely do not have interference issues.
    Most routers will scan to find the best available channel to use, so assuming that your equipment is working OK, things should be OK. Try to keep the Verizon router and Time Capsule at least 6-8 feet, or a few meters from each other.
    This assumes that you are not living in a crowded situation like an apartment complex, where intereference is pretty much a fact of life due to the very limited number of wireless channels that are available.

  • Is there a way to see and have control over who connects to your time capsule wifi network?

    Ok, have this question. Have a time capsule wifi network. Have the latest mountain lion on my mac pro. I know if you go into airport utility, and you click on the picture of my timecapsule it shows what clients are connected to my time capsule aka using my internet etc.
    What I want to know, is there somewhere I can go on the mac where I can view who is connected to my time capsule wifi in more detail, see amounts of data they are using, and maybe even boot them off, or ban there computer from the network for a while if need be? Trying to assess what family members are using up all our data, and want to ban the appropriate offenders
    Even if Mac doesnt have anythink, if you know any third parties from the app store that have an app that is like a "tap" on the top of your Mac that shows networking details, that would be great too!
    Thanks heaps!

    Nope.. TC are not burdened with controls.. don't you know..
    In fact you will find it hard to find a wireless router on the market that mets your specs.. but there is a great 3rd party firmware.. called gargoyle.. this can be loaded like an official firmware in a NETGEAR WNDR3800 which is a fairly cheap very good solid wireless router.. bridge your TC behind this router running gargoyle and you can set quota for all your family members (kids I imagine). Quota can be set for daily, weekly even hourly.. and you can apply throttles or qos.. none of these controls even exist in the TC.

  • Time Capsule WiFi Connection Issues. Help please.

    I'm hoping someone might have some ideas about what could have caused a connection problem I've had since this morning.
    So I setup a WiFi network with Time Capsule a couple of weeks ago in order to do back ups and set up wirless printing but I was told I needed to put my wireless modem into Bridge Mode. So this morning I did that, rebooted the modem as instructed, made sure all power connections and the LAN connection between Time Capsule and my modem were securely connected. On my Mac I was able to log on to my Time Capsule WiFi network and access the internet (there was no wired connection to my Mac, I definitely connected through the WiFi), but I was unable to even log in to the network with my iPhone, Apple TV nor with my daughter's laptop. Only my Mac was able to connect. I downloaded Airport Utility and checked every setting to see if I need to share or enable other connections, I couldn't see anything.
    Does anyone have any ideas on this? I'm not overy tech savvy although hands on I can usually figure things out fairly well and get them working but this has me stumped.

    I presume it worked fine for the two weeks..
    until
    but I was told I needed to put my wireless modem into Bridge Mode.
    And that messed things up.. because you are now in the wrong setup on the TC.
    I have to say.. a. what you were told ain't necessarily so.
    And b. having messed up your existing setup.. need to change the setup of the TC so it will work.
    I am not sure what modem router you have .. or what or how it works in bridge.. but guessing from your current settings..
    You need to reset the TC to factory and start over.
    The TC must be in router mode.. whereas with the previous setup it should have been in bridge mode.
    You will find these settings on the Network tab.. in the utility.
    I am just not sure if the internet should be dhcp or something else, ie pppoe, and that will depend on the modem.
    I would also note there is absolutely nothing wrong with the setup you did have until you were talked out of it.
    The modem can work as router with wireless on or off depending on the network.. and use the TC in bridge mode. It would create a wireless network and can be used for all your items just as well.

Maybe you are looking for

  • Unacceptable delay in provision of BT broadband

    Warning, this is going to be a bit of a rant, but the whole story involves both BT phones and BT broadband. It all started with BT's Homemove facility. I have recently moved from North Wales to Northern Ireland. On 20th January whilst still living in

  • Why ACPI wakeup file does not list according to the modules i use?

    I use a linux kernel that is 99% similar to the default archlinux one at version 3.12.5-1. The only difference is that i removed the inclusion of the xhci_hcd module, so that ehci_hcd takes care of everything. This is lspci output [root@orion cristob

  • Using the mini overseas

    Hi - my family is military and we are moving to Singapore for a few years. We bought our mac mini in the US and love it. I know that the voltages are different there (although from what I have found here, the mini should automatically adjust for the

  • Best way to implement selectOneRadio component with "other" option

    I have a selectOneRadio component that has an other option (see below). If the other option is selected I need to pull the value out of a text field. Any ideas on the best way (or any way) to implement this? This is how it looks on the screen... Plea

  • Sélection "Forme" photoshop CS6

    Bonjour à tous, Petite question à propos de la sélection des formes sur photoshop CS6 (mac). Quand on sélectionne un calque "Forme" nous avons la sélection (de la forme) qui s'affiche sur l'espace de travail, Je trouve cette sélection particulièremen