Time capsule will not back up any more

My Time Capsule will not back up anymore. I have a message stating there is not enough storage room. I have the setting to delete the oldest backup to make room for the newest backup. Any suggestions?

When you upgrade the OS, it produces massive backups. Mavericks in particular has produced all kinds of issues for people.
You have several choices..
1. If nothing in the backup is important to you.. erase the TC and start over. That is the easiest.
2. If you want to keep the old backups then archive the existing sparsebundle to USB drive plugged into the TC.
Then erase the disk and start over. That is good way as once TM has established its routine.. and you are certain nothing in the old backups is needed you can wipe the USB.. after 6months or 1year or whatever.
3. Plug the USB into the TC and use that as the target and start a new TM backup.
4. Plug the USB into the computer and use that as the target for TM.
5. Delete older backups in the sparsebundle yourself. I place this last, as it is the worst option IMHO.
http://pondini.org/TM/12.html

Similar Messages

Time capsule will not back up/sparse bundle is already in use?

Time capsule will not back up/sparse bundle is already in use?

Thank you. After reading more, I turned off time capsule in system preferences, shut down computer, unpluged and pluged back in time capsule. Turned computer back on and the problem went away and time capsule successfully backed up.
There is an old rule in boht PC and MAC world, try reboot first, ask later. I often forget it.
Thanks again.
Quarto

I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

I'm receiving this error message about my Time Capsule:
"The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

1. Open the Sharing preference pane and check that the computer name hasn't changed without your knowledge. For example, if the name was "X's iMac," it might now be "X's iMac (2)". In that case, restore the original name. You may have to click the lock icon in the lower left corner of the preference pane to unlock the settings. Test. If there's no improvement, or if the name had not been changed, continue.
2. If you're backing up to a Time Capsule, or an AirDisk attached to a 2013 or later model AirPort Extreme base station, restart it in either of the following ways:
☞ Disconnect and reconnect the power adapter.
☞ Select the device in the AirPort Utility application and then select
Base Station ▹ Restart
from the menu bar.
If AirPort Utility notifies you of a firmware update, install it.

Time Capsule will not back up address book

Fior some reason Time Capsule will not back up my address book. When I delete an address and start up Time Machine, it will show my address book screen. However all my "older" address book screens in time machine are blank. I have searched various forums but have not been able to find other topics on this issue. Is here anybody who has a clue (the address book is not exempted for back up)?

I just checked to see if TM was backing up my address book, and at first I saw the same thing you're describing, but after a minute or so, old backups appeared. Have you waited a minute to see what happens?

New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup.

New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup. The TC will not allow me to delete or start a new backup disk. My 2024 MacBook Air did the same yesterday but today it backs up.

Seems to be working now. I left the MacBook on all morning trying to back up and now works.

TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
How do I correct this problem?

Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

Time capsule will not back up my iMac since I replaced the hard drive

I replaced the hard drive in my iMac, now time machine won't back up to time capsule because there is not enough space. I believe time machine/time capsule thinks the new hard drive is a new computer and therefore must perform a new complete backup even though the data on the new hard drive came directly off the old hard drive (the was backed up on time capsule. Our time capsule is currently backing up two computers (both Macs). How do I get time capsule to start backing up the new hard drive?

You'll have to be more specific -- that's like emailing an auto mechanic saying only "My car won't start."
Has it ever worked?
Does your Mac recognize your Time Capsule?
Do backups start?
If so, do they hang, or fail? If they fail, with what message?
Start with Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it. If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

Receiving an error message and time capsule will not back up!!

I am getting this error message, The backup disk image “/Volumes/Nikki Worstell1's Time Caps MacBook Pro.sparsebundle” could not be accessed (error -1). Right now I cannot back up on my time capsule. Any suggestions??

See # C17 in this excellent support document by Time Machine wizard Pondini.
http://pondini.org/TM/Troubleshooting.html

Time capsule will not back up after lion upgrade

HI since I upgraded to Lion, my MAcbook AIR 11' will not backup to time capsule. It just gets stuck on 'preparing backup'...any ideas ???
thanks

See #D1 in Time Machine - Troubleshooting.

I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

HT3275 I'm receiving an error message that reads "The backup disk image '/Volumes/Data/my name's iMAC.sparesebundle" is already in use. The time capsule is not backing up any files.

The Time Machine is not completing thte backup to my Time Capsule. I am receiving a message which reads "The backup disk image "/Volumes/Data/Mac Jet's iMAC.sparsebundle" is already in use." I cannot locate the source of the problem or what steps need to be taken to get the Time Capsule operating.

Hi, see if it shows here...
In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
If it does contain data...
http://support.apple.com/kb/TS2474

Time Capsule Will Not Connect to the Internet

I would appreciate any help or suggestions with my Time Capsule problem. We have a 1TB Time Capsule, in all of 2010 it worked great. We had 2 Mac Books backing-up to it daily, never had a problem. We purchased an iMac this month and I migrated the setting from one of the Mac Books onto the iMac, no problems. However, now the Time Capsule will not back-up either the iMac or the other Mac Book. The Mac Book that I migrated all the information from hasn't been turned on since the migration. Yesterday, the Time Capsule no longer allow us to connect to the internet. I contacted my ISP to ensure internet service was active and plugged the exisiting Mac Book (we still use) into the cable modem and was able to use the internet. This morning the TC wouldn't allow audio streaming to an ATV. Any ideas on what to do to correct the problem?

I'm good with erasing all former back-ups on the Time Capsule and starting fresh with the iMac. Please tell me how.
o Open AirPort Utility - Click Manual Setup
o Click the Disks icon
o Click the Disks tab just below the Disks icon
o Click the Erase button in the center of the window
The Quick Erase option will be fine for your purposes. This will only take a moment or two.
When you are ready to backup the iMac,
o Connect it to one of the LAN <-> ports on the Time Capsule using an ethernet cable
o Open System Preferences (gear icon) on the dock
o Open Time Machine
o Click Select Disk
o Click on your Time Capsule to highlight it
o Click Use for Backup
The backup will begin in a few minutes. Allow a long time for the backup. A good time to start this is late at night so you can let the backup run overnight.
Message was edited by: Bob Timmons

Time machine will not back up to time capsule

Time machine will not back up to my Time Capsule on my MacPro running SnowLeopard. Error message says it cannot access the backup file. I have reset the TC, and erased the drive and I get the same error on initial backup. I can see the volume and drag files to it, so the disk appears OK. What's going on here?

Depending on exactly what message you get, you might need #C17 in Time Machine - Troubleshooting
If not, please post the message (a screenshot would be fine).

Time capsule will not hard reset

Have a older time capsule will not reset any method. Light just keeps flashing yellow

Can you access it via the airport utility.. if so you can reset via the utility.
When you press the reset button with a paperclip or toothpick you should feel the switch.. it is fairly normal switch effect like the keyboard. If in the past you pushed too hard you have bent and jammed the lever.. so it is now broken.. the only way to fix it is to open the TC and fix the lever arm.
BTW the light always flashes yellow.. when you have done a successful reset it simply flashes faster.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

Time Capsule will not start

My Time Capsule will not complete the startup sequence as indicated by a solid amber light on. I have tried pushing the reset button for more than 5 seconds to no avail. I also tried holding the reset button while connedting the power source and that did not work either. Any ideas?

Let's clarify how the normal startup sequence occurs when you perform a Factory Default Reset
Power off the Time Capsule (TC) for 4-5 minutes
Hold in the reset button, and while you continue to hold it in, plug the power back in to the TC
Continue holding the reset button for 8-10 seconds after you plug the power back in and then release the reset button
The TC should display a solid amber light for approximately 25-30 seconds and then begin to slowly blink amber. The blinking amber is your signal that the TC has fully reset and is now ready to be re-configured.
If the amber light stays solid and does not change to blinking after 25-30 seconds, and you have tried the Factory Default Reset a few times, then I'm afraid that there is an internal electrical problem with the TC and you will need to get in touch with Apple to let them have a look.
Please post on your results.

Time capsule will not back up any more

Similar Messages

Maybe you are looking for