Time capsule will not back up/sparse bundle is already in use?

Time capsule will not back up/sparse bundle is already in use?

Thank you.  After reading more, I turned off time capsule in system preferences, shut down computer, unpluged and pluged back in time capsule.  Turned computer back on and the problem went away and time capsule successfully backed up.
There is an old rule in boht PC and MAC world, try reboot first, ask later.  I often forget it.
Thanks again.
Quarto

Similar Messages

  • Time Capsule will not back up address book

    Fior some reason Time Capsule will not back up my address book. When I delete an address and start up Time Machine, it will show my address book screen. However all my "older" address book screens in time machine are blank. I have searched various forums but have not been able to find other topics on this issue. Is here anybody who has a clue (the address book is not exempted for back up)?

    I just checked to see if TM was backing up my address book, and at first I saw the same thing you're describing, but after a minute or so, old backups appeared. Have you waited a minute to see what happens?

  • Time capsule will not back up any more

    My Time Capsule will not back up anymore. I have a message stating there is not enough storage room. I have the setting to delete the oldest backup to make room for the newest backup. Any suggestions?

    When you upgrade the OS, it produces massive backups. Mavericks in particular has produced all kinds of issues for people.
    You have several choices..
    1. If nothing in the backup is important to you.. erase the TC and start over. That is the easiest.
    2. If you want to keep the old backups then archive the existing sparsebundle to USB drive plugged into the TC.
    Then erase the disk and start over. That is good way as once TM has established its routine.. and you are certain nothing in the old backups is needed you can wipe the USB.. after 6months or 1year or whatever.
    3. Plug the USB into the TC and use that as the target and start a new TM backup.
    4. Plug the USB into the computer and use that as the target for TM.
    5. Delete older backups in the sparsebundle yourself. I place this last, as it is the worst option IMHO.
    http://pondini.org/TM/12.html

  • New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup.

    New Time Capsule will not back up my 2009 MacBook Pro. I can see and find my last back before Mavericks but cannot backup. The TC will not allow me to delete or start a new backup disk. My 2024 MacBook Air did the same yesterday but today it backs up.

    Seems to be working now. I left the MacBook on all morning trying to back up and now works.

  • TS1550 My time capsule will not back up. There is a time machine error message that states "The backup disk image "/volumes/Backup/Jane's MacBook Pro.sparsebundle" is already in use. How do I correct this problem?

    My time machine will not back up. I get a Time Machine Error message that reads: "The backup disk image "/Volumes/Backup/(myname)'sMacBook Pro.sparsebundle" is already in use.
    I have not been able to back up for two weeks, I think this occurred after an update to the operating system, but I am unsure.
    How do I correct this problem?

    Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.

  • Time capsule will not back up my iMac since I replaced the hard drive

    I replaced the hard drive in my iMac, now time machine won't back up to time capsule because there is not enough space. I believe time machine/time capsule thinks the new hard drive is a new computer and therefore must perform a new complete backup even though the data on the new hard drive came directly off the old hard drive (the was backed up on time capsule. Our time capsule is currently backing up two computers (both Macs). How do I get time capsule to start backing up the new hard drive?

    You'll have to be more specific -- that's like emailing an auto mechanic saying only "My car won't start."
    Has it ever worked?
    Does your Mac recognize your Time Capsule?
    Do backups start?
    If so, do they hang, or fail?  If they fail, with what message?
    Start with Time Machine - Troubleshooting.   It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

  • Receiving an error message and time capsule will not back up!!

    I am getting this error message, The backup disk image “/Volumes/Nikki Worstell1's Time Caps MacBook Pro.sparsebundle” could not be accessed (error -1).  Right now I cannot back up on my time capsule.  Any suggestions??

    See # C17 in this excellent support document by Time Machine wizard Pondini.
    http://pondini.org/TM/Troubleshooting.html

  • Time capsule will not back up after lion upgrade

    HI since I upgraded to Lion, my MAcbook AIR 11' will not backup to time capsule. It just gets stuck on 'preparing backup'...any ideas ???
    thanks

    See #D1 in Time Machine - Troubleshooting.

  • I loaded in Lion - but my time capsule will not back up. I get an message: couldn't complete backup due to a network prolem. Also it says "make sure your computer and back up disk are on the same network, and that the backup disk is turned on.

    I installed Lion on my Mac Pro laptop. Regarding Time Capsul - I get a messaage as follows: couldn't complete backup due to a network problem. Make sure your computer and back up disk are on the same network and that the  backup disk is turned on. Then try again to back up. I have time capsul turned on. bill

    I have exactly same problem with my MBP and MBA, after upgrading to Lion. I've tried to fix this issue while cheking key chain issues and network setup, even formating hdd and time capsule firmware upgrade (ver. 7.6.1.). Nothing can help. It is very annoying.

  • Time Capsule Will Not Connect to the Internet

    I would appreciate any help or suggestions with my Time Capsule problem. We have a 1TB Time Capsule, in all of 2010 it worked great. We had 2 Mac Books backing-up to it daily, never had a problem. We purchased an iMac this month and I migrated the setting from one of the Mac Books onto the iMac, no problems. However, now the Time Capsule will not back-up either the iMac or the other Mac Book. The Mac Book that I migrated all the information from hasn't been turned on since the migration. Yesterday, the Time Capsule no longer allow us to connect to the internet. I contacted my ISP to ensure internet service was active and plugged the exisiting Mac Book (we still use) into the cable modem and was able to use the internet. This morning the TC wouldn't allow audio streaming to an ATV. Any ideas on what to do to correct the problem?

    I'm good with erasing all former back-ups on the Time Capsule and starting fresh with the iMac. Please tell me how.
    o Open AirPort Utility - Click Manual Setup
    o Click the Disks icon
    o Click the Disks tab just below the Disks icon
    o Click the Erase button in the center of the window
    The Quick Erase option will be fine for your purposes. This will only take a moment or two.
    When you are ready to backup the iMac,
    o Connect it to one of the LAN <-> ports on the Time Capsule using an ethernet cable
    o Open System Preferences (gear icon) on the dock
    o Open Time Machine
    o Click Select Disk
    o Click on your Time Capsule to highlight it
    o Click Use for Backup
    The backup will begin in a few minutes. Allow a long time for the backup. A good time to start this is late at night so you can let the backup run overnight.
    Message was edited by: Bob Timmons

  • Time machine will not back up to time capsule

    Time machine will not back up to my Time Capsule on my MacPro running SnowLeopard. Error message says it cannot access the backup file. I have reset the TC, and erased the drive and I get the same error on initial backup. I can see the volume and drag files to it, so the disk appears OK. What's going on here?

    Depending on exactly what message you get, you might need #C17 in Time Machine - Troubleshooting
    If not, please post the message (a screenshot would be fine).

  • I get this error message when I try to back up my laptop:  Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle is already in use.  Anyone know how to fix it?

    I get this error message when I try to back up my laptop:
    ' Time machine could not complete the backup.  The backup disc image "/Volumes/Data/Lou Ann Buesing's Mac Book Pro. sparse bundle' is already in use. "
    Anyone know how to fix it?

    Reboot the TC.. Sometimes you need to reboot the whole network.
    This is what comes of Lion and then made worse in Mountain Lion of Apple not spending enough time to fix the bugs.
    Read C12 in pondini.
    http://pondini.org/TM/Troubleshooting.html
    C17 can be related I think.

  • Time couldn't back up my macbook as pro sparse bundle is already in use

    My Macbook Pro will not back up to Time Capsule as it says the Pro-Sparse bundle is already in use.

    Restart your MacBook Pro and the Time Capsule. In most of the cases, this should solve that problem.
    See > http://pondini.org/TM/C12.html

  • My time machine will not back up and i get this message: /Volumes/Data/Kathy P's MacBook.sparsebundle" is already in use

    my time machine will not back up and i get this message: /Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use....i have tried multiple fixes but still unable to back up

    If  you have tried the fixes in Pondini's Time Machine Troublshooting, specifically #C12 and nothing helps, then it is time to let one of the genius types at an Apple Store take a look.
    http://pondini.org/TM/Troubleshooting.html
    If you cannot take the Time Capsule to an Apple Store, contact Apple Support directly.
    http://www.apple.com/support/contact/

  • Time Capsule will not reset

    I'm trying to delete old user devices from my access control list, but after I remove them, the Time Capsule will not reset properly.  After I delete one of the devices, click on Update, the time capsule gets stuck during the update and never fully resets.  If I pull the plug and restart the time capsule, it reverts back to it's previous state with the devices still in the access list.  Is anyone having this trouble?

    Dear Stephen,
    I have the same problem and I found this thread describing the same thing on another forum. Each time I try to change any setting this happens (i.e., TC won't reset and I have to unplug it before I can use it again).
    When the postings in the mentioned thread are any indication no reset (hard or soft) will have any lasting effect. But of course, I will try to reconfigure and see what happens.
    Any solution or localization of where the source of the problem (firm-/soft-/ or hardware) would be highly appreciated:)
    Best
    Rene

Maybe you are looking for

  • [solved]Xfce works, but no others!

    Hello gentlemen. After some months of playing around with Arch and my wireless connection with it, I finally managed to get to a point where I have more than a terminal. I set up xorg seemingly perfectly with nvidia-xconfig, and am able to run Xfce w

  • Is it possible to buy macbook air with russian keyboard?

    Is it possible to buy macbook air with russian keyboard?

  • Has anyone found the answer to the "can't connect to wireless" problem?

    Since 10.5 I have not been able to connect to either our home wireless network or the city free wireless network. Our other systems running 10.4 connect perfectly. We also have 2 PCs which work fine. I installed 10.4 in a seperate drive in my system

  • Quicktime Pro - get rid of excess file size

    Hi, I have FCS2 on some computers, but not on others (licensing) so I want to use Qt Pro to do simple editing on those.. mainly to cut off extra blank footage when I capture too much from an analog source. I know how to edit the footage in QT Pro, bu

  • Weird battery dillema

    as soon as i unplug the nano from the computer, the nano battery indicator goes down, it sits on the computer till full. any clues anyone?