Time Capsule: Windows user could access all folders in TC
I have a new TimeCapsule (TC) 1 TB, 2 MBPs (latest Mac OS X) and 2 PCs - 1 runs XP and other runs Vista.
I had setup TC as NAS, allow users to access TC using account.
Each user in MBPs can access their folder and shared folder only, so it is fine.
Same for windows users, they can access their folders and shared folder only.
However I found that, if the windows user has the windows administrator privilege and has windows account password as same as TC disk password, then after logged-in windows machine, this user can access TC using Run:\\TCname then he/she can see all folders in TC and has read/write privilege on these folders. TC does not ask for any password (as long as the user has logged-in their windows machine) nor stop the user to access any folder in TC.
Is anybody has the same problem ? Or you can try yourself and see if it happens on your system ?
Apple: can you fix this, this is unwanted "feature" ?
SMB is blocked by every responsible ISP. As indeed it has to be due to the level of unprotected shares on computers on the internet.
If the TC is the main router.. and you have port forwarded SMB ports wan to lan.. be thankful your ISP has blocked it so your files and network are not hacked.
The right way to do this is a vpn router.. with the TC working as bridged device on the network.
Windows does not offer AFP which is the only other protocol Apple offer in the TC and is the only one exposed to internet.
Similar Messages
-
I use a web site called ACRIS- it allows me to access NYC Finance dept records- specifically images of deeds. Up until yesterday I had no problem. Then without any apparent reason I could access all parts of the site, but could not access the deed images. First I thought it was a problem on their end, which sometimes happens, but after waiting 24 hours I was still having the problem. Then I tried windows explorer and it worked without any problem. How do I fix this?
Hi jeffbeal,
First question I would ask is what has changed recently? Did you add any new extensions or add-ons?
I'd try starting Firefox in [[Safe Mode]]. If you don't have the issue while all of your add-ons, extensions, and themes are disabled, you can try adding them back in one by one until you find the culprit. You should look at the [https://support.mozilla.org/en-US/kb/Troubleshooting-extensions-themes Extensions and Themes troubleshooting guide ] and the [[Troubleshooting plugins]] article as well.
Hopefully this helps! -
Some windows-user could not see all images on the print result
We have a Problem when printing images (blobObject).
We are printing all displayed images immediately on the report. The images are represented on the report by Blob objects. At runtime we create a Bitmap object in memory, which is stored in a memory stream, the byte array of MemoryStream is placed in the field of the DataSet, which has deposited on the report as BlobObjekt.
The error that occurs is that some Windows-User didnu2019t see all pictures. But without any Errormessage, the picture is still white.
All users use the same Windows-PC with the Crystal Report Version 10.2.3600.0 .
The difference between the pictures is simple:
Picture 1)
- Note: This picture appears properly
- This one exists as JPG-File on the harddisk
- We read the image, convert it into a memory stream and place the byte array in de DataSet-Field
- This images are positioned in the header and footer section
Picture 2)
- Note: this picture does not display properly
- This one is created by the application
- It is created in memory by an graphics-object
- This graphics-Object is converted into an memory stream and so on
- This images are positioned in the details section
Here are the piece of code, which is the dataset supplied with pictures. (abbreviated version)
Using stream As IO.MemoryStream = New IO.MemoryStream
Using dest As Bitmap = New Bitmap(field.Width, field.Height)
Using gd As Graphics = Graphics.FromImage(dest)
gd.Clear(Color.White)
gd.DrawImage(Source, destrect, sourcerect, GraphicsUnit.Pixel)
dest.Save(stream, System.Drawing.Imaging.ImageFormat.Bmp)
End Using
End Using
ds.Tables(datasourceTableName).Rows(j)(datasourceName) = stream.ToArray
stream.Close()
End Using
Has anyone an ideo whats going wrong?
The logic to print the images is always the same only the windows user is different.Is this a web or windows based application?
Is this happening on the same computer but with a different user? It could be a user rights issue. Try using the Process Monitor tool to see if it is highlighting any permissions issues.
Regards,
Jonathan -
Time Machine could not complete the backup "Time Capsule". Unable to access disk image backup "/ Volumes / Time Capsule / iMac.sparsebundle" (error 112).
How can I fix it?You might want to take a look at Pondini's excellent support document......Time Machine Troubleshooting
http://pondini.org/TM/Troubleshooting.html
See # C17 -
Windows Users can access shares but Macs Can't
Running 10.8 on the server and here is the below problem I am having
1. Windows users can access the file shares read/write (even though they create permissions wrong, another day to takle that since I already tried ACL)
2. Macs running 10.8 and Mavericks
Open the server in finder on a user machine. Can sometimes see the two share folders. Other times just get the spinning wheel.
Now if you are so brave to click on the folder then finder will spin forever.
It locks finder up so hard that you can't shut down the machine without holding the power button. Other programs will run just fine, it only affects finder.
I tried connecting from the mac with smb:// to see if it is an AFP issue but it just sits on connecting forever.
I looked through the logs and don't see anything. But my knowledge of logs is terrible.
Any help would be great.
Thanks
ThomRunning 10.8 on the server and here is the below problem I am having
1. Windows users can access the file shares read/write (even though they create permissions wrong, another day to takle that since I already tried ACL)
2. Macs running 10.8 and Mavericks
Open the server in finder on a user machine. Can sometimes see the two share folders. Other times just get the spinning wheel.
Now if you are so brave to click on the folder then finder will spin forever.
It locks finder up so hard that you can't shut down the machine without holding the power button. Other programs will run just fine, it only affects finder.
I tried connecting from the mac with smb:// to see if it is an AFP issue but it just sits on connecting forever.
I looked through the logs and don't see anything. But my knowledge of logs is terrible.
Any help would be great.
Thanks
Thom -
I cant seem to open some photos on Iphoto. I downloaded like 3 months ago from my phone into the iphoto. I could access ALL of my photos back then but when I try and access them now I cant seem to open the file. When i open iphoto and open the folder thats on it, i can see ALL the photos that are there but when I click on different ones some appear in the larger screen but A LOT of them dont appear. Iphoto seems to have erased the file or I dont know.
Also I tried clicking on the photo that doesnt appear and making it "Reveal it on finder" - "original file" and it says 'The operation can’t be completed because the item can’t be found.".
I really want those photos because they involve a really special family vacation, please help me find those photosA LOT of them dont appear.
What do you see in the window when you click on those? A blank, black window? An exclamation mark? What? -
I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
TC was designed to backup your Mac. The TC literature is pretty clear about this:
If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
Have you thought about what will happen when....not if....the TC has a problem? Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
Then, the TC will backup both your Mac and the hard drive. So, you have original data on on one drive and backups on another drive.
That would be a minimum backup plan. Most of us have more than one set of backups. -
Log and Transfer Window unable to access all the files that were stored a P2 card
I have a 64gb P2 card that was filled to capacity (63.09gb) on a recent shoot with a Panasonic HPX170 camcorder. An addlitional 16gb card was in the second slot.
I transferred the files from the 64gb P2 card to my iMac as usual, and did not see any files to transfer on the second card. When accessing those files in FCP 6.0 I only see part of the files with the last one listed as "incomplete". Four files that I see in the P2 card transfer folder do not show up in the Log and Transfer. The LASTTEXT Clip file was transferred with a 3:07pm time, the inaccessible files end with a 3:06pm time.
I have the original 64gb P2 card in tact so I re-transferred all contents to my computer and into a new folder. When I opened a new project to see if I could access all the files, only the files I previously was able to access came up.
Have I created a FCP Log and Transfer and just need to reset something in FCP? Is there a way to recover the data/restore a path to the data via FCP so I can access all the files or is that a Panasonic issue?Oy, If it's the second or first half of a spanned clip that's missing, FCP will not import, and the camera cannot repair. There is nothing to repair, according to the camera. Files are just missing.
There are third party MXF software options that allow FCP to import the P2 files natively, without converting to QT. I wonder if they will see the MXF files, or if they too need the complete file to do so. I think most have demos.
Calibrated Softare has MXF import:
http://www.calibratedsoftware.com/products.asp
Then there's MXF4Mac:
www.mxf4mac.com
And Raylight.
http://www.dvfilm.com/raylight/ -
Trouble Writing Large Files to Time Capsule - Windows 7
Hi
I'm having some trouble with my Time Capsule. I can access it and read files from it fine. However, I have trouble writing files to it. Small files ( say multiple word docs) write fine. However, with medium size files (say 120 mb) it crashes. I have noticed that no matter how large the file is, it writes up to 10% of the file very quickly but then crashes. It fails with the error message that 'the network location specified is no longer available'. Sometimes, when it crashes, it essentially crashes my Time Capsule network. I.E I am still connected to the internet but I can access the Time Capsule.
I used to be able to write files (when I was using Vista) no problem. I still have 250gb left.
What can I do to fix this?
For details:
500gb Time Capsule
Windows 7 64bit Home Premiumanyone know how to help?
-
Time Capsule "backup disk could not be found"
I occaisonally receive an error message on my Macbook Pro and iMac, both running OS 10.8 that my time capsule "backup disk could not be found." I can access the Time Capsule with Airport Utility, can see my backups in Time Capsule-it just won't back up. It doesn't matter whether I am connected via wifi or ethernet cable. I have had to basically disconnect and then go through a complete backup when this happens, which kind of makes Time Capsule useless for a real backup plan Any suggestions?
I recently came accross an instruction to reduce the number of characters in the Time Capusle backup disk name. After a year of having to restart my Tiem Capsule to get my MacBook Pro to backup, it now seems to do so consistently.
-
How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?
MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC. -
I am using an Macbook pro in conjunction with a Time Capsule. I back up all my aperture librarys on it, but how can i view these images that are stored on the capsule please ??
If you want to see what is in a file that is backed up by time machine then you have to restore the entire file. Having said that I have had good experience with Time Machine and individual files... if the file is there then all of it's components are almost for sure there. A way to get around this in Aperture would be to use referenced images. The images then still exist as individual files and can be backed up and restored individually. You would have to do so on a file by file basis though and your album information would still only be saved within the Aperture library.
-
Add root user to access all server services?
Hi,
How do I add root user in snow leopard server to access all its services. I have a admin account from which i can access all services but looking for root user to access all server services.
When ever I'm trying to ssh using root it gives an error.
Please find the error output below.
arth:~ gulab$ ssh [email protected]
Password:
Permission denied (publickey,gssapi-keyex,gssapi-with-mic,keyboard-interactive).
Thanks,
Gulab PashaThe root account is, and should be, disabled. There is no need to log in as root.
If you require root-level privileges for any task, use sudo once you've logged in using your admin account. If you need a root shell, then:
sudo -s
is your friend.
There used to be a way to enable the root account under earlier OS versions. There may still be a way to do it in 10.6 but I've never bothered looking since it's not needed. -
am first time mac book user, could someone assist me in deleting the junks in my cache, cookie etc., and how useful the mac keeper software is?
AshwathRaj wrote:
am first time mac book user,
In General 3rd Party AV Software and Cleaning Utilities tend to cause More Issues than they claim to fix...
They are Not Required...
Mac OS X tends to look after itself.
See > http://www.apple.com/osx/what-is/security.html
More Info Here > https://discussions.apple.com/thread/4545776?tstart=0
The Safe Mac > http://www.thesafemac.com/mmg/
AshwathRaj wrote:
... and how useful the mac keeper software is?
See Here > Beware MacKeeper -
After resetting Time Capsule, how do I access my previous backups?
After re-setting Time Capsule, how do I access my previous backups?
Access it to do what??
You can migrate the data.. see Pondini instructions for migrate. (or from apple).
His instructions are a little out of date.. but still more useful than the over generalised stuff Apple give you.
http://pondini.org/OSX/MigrateLion.html
OS X: How to migrate data from another Mac using Mavericks
If you wanted to continue using the backup with TM.. no you cannot inherit a backup from a different machine.
To simply access the backup .. then open the sparsebundle from finder or TM..
See the instructions in Pondini.. Q15-17 here.
http://pondini.org/TM/FAQ.html
If you want to do something else you need to tell us what it is??
Maybe you are looking for
-
Within Internet Explorer you can click on a little arrow next to the homepage icon and a dropdown appears with a list of your homepages (I have 5). So if I want to quickly check my facebook or e-mail I can click on it and then on whichever I want to
-
How to get content item out of work flow automatically
hi experts, my requirement is that Contributor will contribute the Content , and provide the content publish Date. When contributor contribute content, content goes in workflow. I want auto approval of workflow so that when Publish Date actually come
-
hi all 1.how to clone a oracle database? 2.what is the difference between cloned database and restored back up of a particular database?
-
Business Partner number not assigned to ORG unit
hello colleagues, I cretaed an Org Unit at the highest level, i have assigned Basic data, address data and i have assigned function and attribute, but when i save the Org unit,I am not getting the BP number, can anyone tell me what could be reaosn f
-
Sync ipod classic with itune library
Why won't my ipod classic sync with my entire library on my MacBook Pro?