Time Capsule - "wireless clients" mean what???

I have a new Time Capsule, and configured it today. I noticed it listed a wireless client; whenI clicked on it a second box opened up. The "client" (Frank's Big Dog") was a large back up hard drive I once had connected but no longer do. Anyone know how to disconnect that wireless client?

Change the wireless password.

Similar Messages

How to modify Time Capsule wireless clients?

I have a Time Capsule that I use as the router for the house. We've had a lot of computers connected to it over the years. What I am wanting to know if it is possible to remove wireless clients that are connected or previously connected. Under Finder there is an HP computer that is connected but to my knowledge there is no Windows based computer using the network. At one point there was an old HP laptop connected to it. But for the life of me I can not find anything or figure out how to remove this computer from showing up under the Finder. I am confident that the problem resides at the router because I can see that same device connected.
http://i.imgur.com/PXdR9XJ.png

Under Finder there is an HP computer that is connected but to my knowledge there is no Windows based computer using the network.
Maybe you have an HP printer that is connected either by wireless or Ethernet?
Does the HP device show up in the list of current wireless clients? If not, then the HP device is connected via Ethernet to your network.
What I am wanting to know if it is possible to remove wireless clients that are connected or previously connected.
If a wireless device is already connected to the network, the only way that you can remove it is to change the wireless network password, or set up Timed Access on that device..
Chaging the password will disconnect all connected devices, then you will have to log on again from each device that you want to connect.

Imac internet sharing ethernet - time capsule - wireless client use imac

hi all,
i have the following setup in mind:
a g5 imac with 3g modem attached and internet sharing (3g/ethernet) switched on. with an ethernet cable it is connected to a time capsule. through the wireless option of the time capsule i want to be able to use the imacs internet sharing with two macbooks - its not working ....
imac: g5, no wireless, os 10.5
macbook: wireless, os 10.4
macbook pro: wireless, os 10.6
what went wrong? how to set up the time capsule to allow the internet sharing coming from a wired mac to wireless clients macbooks?
or is this not working at all???

If you configure your Mac to share an ethernet internet connection over AirPort, your G-devices should have no problem connecting. We do it here with iPods and an iPhone, they are G.
My Mac mini is connected to the internet by Ethernet cable to my ISP's Arris gateway. I am sharing the Ethernet connection to two iPod Touches and an iPhone via AirPort from my Mac mini. This is how I configured the Mac to share the connection;
1. In Sys Prefs/Sharing I highlighted Internet Sharing (do not check the box)
2. Share your connection from: Ethernet (from the dropdown menu)
3. To computers using: AirPort (check the little box)
4. Press the button AirPort Options...
5. Name your Network
6. I use Automatic for the channel
7. I encrypt my network using a 40-bit WEP key
8. *For a non-Apple device you must use only a 5 alphanumeric character, 40-bit WEP password or only a 13 alphanumeric character 128-bit WEP password*
9. Press OK
10. Check the box for Internet Sharing
11. Answer any dialog boxes that pop up
Dah•veed

My time capsule is flashing yellow. what does that mean

my time capsule is flashing yellow. what does that mean?

It needs attention. Determine the reason by using AirPort Utility. It's in your Mac's Utilities folder.

TS1550 Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless Apple external back up disk? How can I see what folders have been actually stored in the wireless back up disk?

Do external hard drives mounted on my Mac get backed up by time machine on a time capsule wireless apple external hard disk? How can I see what folders have been actually backed up in the external wireless disk? any help would be appreciated

They can provided you remove them from the Exclude list. Normally, Time Machine does not automatically backup external drives.

I have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

i have a 1st gen time capsule. can I view what devises are connected to my network? if so, how

Open the airport utility.
Click on manual setup.
Click on advanced.
Click on Logs and Statistics.
Click on Wireless Clients
Voila!!

New to Apple and Time Capsule Wireless

I am a new apple customer. I just bought my 1st iMac and I am trying to make the total break from MS.
I have mediacom as my ISP and my present wireless router is a Linksys WRT600n (purchased about 3 years ago). With this system I have had problems with coverage in my house as well as needing to reboot the device often.
The router is located in a 1st floor bedroom and I get spotty coverage in the living room and even more spotty service in the adjacent kitchen. The distances away from the router as the crow flies is 24 feet for the living room (involves 4 interior walls) plus 15 more feet (an another wall) to the kitchen. Since we use our wireless system more in our living room and our bedroom (this is only 12 feet away and 1 interior wall), I have decided to move the wireless router to the living room and place it on top of a entertainment center. My thinking is that it will provide better coverage to the areas where we use it (hoping to use Apple TV in both living room and bedroom).
This leads me to my question: what has been the experience of the time capsule community in regards to time capsule wireless coverage and reliability?
Also, please note that the iMac will be located in the same bedroom where I will be removing the current router and as such, the wireless backup capabilities of the time capsule will need to traverse the same 24 feet and 4 interior walls.
Any feedback will be most appreciated.
Harvey49

The reliability of the Apple Extreme is very good.. TC much less good. 3years is often a failure point for stuff that runs too hot. Like your WRT600N and the TC with its Green Drive and internal power supply.
On wireless range though I would say pretty ordinary. I have tested all the generations of the TC and most of the Extreme.. including Gen5. In my double storey house with an old G wireless modem router (downstairs extreme end).. right near the TC/AE whichever I am running.. from the other end of the house (upstairs) the old G wireless gives more than adequate signal to get full speed internet.. the TC does not.. And 5ghz goes pretty much to the next room and then disappears but that is as expected.
Use the tests here to find what give good range.
http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn (you can change the chart to give speed in the worst location ie F http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
Airport extreme is there. Well down but there.

My MBP doesn't remember my Time Capsule wireless network when waking from sleep

My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep. Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password. This is very cumbersome. And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem.
It appears that this problem has to do with the hidden SSID. I don't need the lecture on how hidden SSID provides no serious security benefit. That's why I have the WPA2 encryption. I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
Solutions I've alread tried:
1. Open Network Preferences
2. Select Airport from left hand column (and ensure Airport is at top of that list)
3. Select Advanced
4. Delete all Preferred Networks.
5. Apply settings.
6. Restart computer
7. Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
This solution works fine as long as I don't take my computer elsewhere and connect to another network. As soon as my preferred networks list gets another network, my MBP stops finding my TC network. Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network." Thus, I assume the problem lies with the Time Capsule.
Any ideas?

LaPastenague, thanks for weighing in. Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently. With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
When an SSID is hidden, the base station does not broadcast its identification. Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality? Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP? And once broadcast by the MBP, the TC should detect and reply?
Basically, the MBP can connect to the hidden TC manually just fine. The MBP can connect to the old setup automatically just fine. The MBP cannot connect to the TC automatically. Aren't these automatic connection functions solely on the MBP?
I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
Z

Extending Gen 1 Time Capsule Wireless network with Airport Express N

I am having difficulty setting up my new Airport Express w/ 802.11N (SKU# MB321LL/A) to extend the wireless network from my Time Capsule (SKU# MB276LL/A).
My setup is as follows:
Time Capsule is connected to Cable modem with the following wireless settings:
Wireless mode -> Create a Wireless Network
Allow this network to be extended -> Checked
Radio Mode ->802.11n (5Ghz N only)
Wireless Security -> WPA2 Personal
The issue is the when I attempt to setup the AE to extend the network. I match the settings to the Time Capsule:
Wireless Mode -> Extend a Network
Select the Time Capsule Network
Allow wireless clients -> Checked
Wireless Security -> WPA2 Personal
However after I reset the AE the LED glows Amber and the following problem is reported:
+Wireless Network+
+This AirPort wireless device is set up to join a specific wireless network that can't be found. If you don't see the network that you want to join in the Network Name Pop-up menu, enter the network name and network password if necessary to try again.+
When I check the Airport->Wireless tab the settings were as before.
Any thoughts on this? Thanks.

Welcome to the discussions!
Have you tried to position the AirPort Express close, say 10-15 feet, as a test to see if it will connect that way?
If so, then move it back another 10-15 feet, etc.
5 GHz signals do not travel well or penetrate surfaces very well, so my first thought was that the signal was not strong enough for the Express to pick it up where you had it located.
Message was edited by: Bob Timmons

Mac connects but PC won't connect to internet via TIme Capsule wireless net

I have my personal Mac and work PC at home. I'm switching from a wireless network using my airport extreme base station to a new time capsule. Had no problems earlier, but now with my new wireless network I have the following problem:
- Both Mac and PC are able to connect to my home wireless network created through Time Capsule
- Only Mac can access the internet via the Time Capsule wireless network
- PC connects fine to the wireless network, but the settings indicate the internet cannot be accessed
I've tried fiddling with configurations etc. but cannot seem to get the PC to connect through to the internet using my Time Capsule.
The PC will connect directly to the net if I plug in the ethernet from my cable modem....What's the problem? Any ideas?

Welcome to the discussions forum AZR-DC.
The PC will connect directly to the net if I plug in the ethernet from my cable modem...
Make it a habit to power down your modem whenever you connect something different to it. Merely detaching the AEBS and attaching your Time Capsule or your computer directly will confuse most modems, so leave it powered down for a few moments. Power down your other equipment while you're at it.
Then, power up all the equipment as follows:
Modem... wait a few moments for it to complete its startup sequence.
Time Capsule. Wait a few moments again.
Computers.
Be sure your PC and your Mac are getting their addresses "via DHCP".

Extend Time Capsule Wireless Range

I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls. All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors. So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak. So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router. From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
I called Applecare who told me:
-To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
-Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
-Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
I have several questions for you wise people out there:
1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
http://www.quickertek.com/products/timecapsuletriband.php
Any information would be much appreciated! These networking issues have been giving me months of headache.
Thank you!
Alexander
Specs:
Apple Time Capsule 1TB
Airport Express N version
Connected with 2.4ghz. band to N capable Macs.

Extending your network with an AirPort Express (AX) won't boost the TimeCapsule's (TC's) range per se. It will expand the network's range by adding another transceiver.
If you'd prefer to avoid using Ethernet to connect the TC and AX, you might get a better signal on the first floor if the AX was on the second floor, i.e, roughly halfway between the TC and the 1st-floor computer. [Extending the range of an 802.11n network|http://docs.info.apple.com/article.html?path=AirPortUtility/5.1/en/ap21 24.html] describes how to configure them.
If an Ethernet linkup is no problem, though, that should work even better. In this case, it's best to use different (by 3 or more) channels on the 2 stations to reduce the chance that they'll interfere with each other.
Either way, it's best to use the same network name, network password, and encryption on both stations so you can roam freely through the building without needing to switch manually between them.
[Designing AirPort Networks 10.5-Windows manual|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] is another good resource you may find helpful.

HOME HUB AND TIME CAPSULE WIRELESS CONNECTION

hi,
i have recently moved house and have BT broadband and Sky TV. The point where the master socket comes into my house is in an upstairs bedroom, well away from my living room where the TV is... So i'm wondering if its possible to have the Home Hub in the bedroom and then connect my apple time capsule wirelessly to it, then run ethernet from the TC to my Sky box for downloading TV etc. I may need to move the BT master socket to the living room, but hoping to find a workaround.
I have read some of the forums about bridging etc, but im not sure if this will solve the issue.
Any help would be appreciated!
Cheers

Since you, effectively, have two routers in series you will want to reconfigure the downstream router (the TC in this case) as a bridge to allow the upstream router (BT HomeHub) to continue to provide both NAT & DHCP services for all wired & wireless clients.
To set up the Time Capsule (TC) as a bridge, either connect to the TC's wireless network or temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the TC, and then, using the AirPort Utility, change this setting:
Internet - Internet Connection tab
o Connection Sharing: Off (Bridge Mode)
o Click Update to apply the new settings.

Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC?

Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC? I was wondering since my iTunes files and folders are connected to iTunes.

You can but the TC is the worst possible location. The design is slow to start and quick to stop data connections.. that will cause trouble.
Moving folders has specific instructions.
http://support.apple.com/kb/ht1364
Move it to an external hard disk fine.. but be very sure you will not be happy with the TC as a location.

How to Sync iPhone/iPad with Time Capsule (wirelessly)

Hi - I am wondering if there is way to sync my iPhone or iDevices with Time Capsule wirelessly. Please let me know if there is and how?
Thanks in advance..

The iOS devices....iPhones, iPads, iPods, etc.....sync to iTunes on your computer or to iCloud.
See this Apple support document:
http://support.apple.com/kb/ht1766
It is not possible to sync iOS devices directly to the Time Capsule.

How to integrate AT&T U-Verse with existing Time Capsule wireless network

I would like to switch from Comcast HDTV+Earthlink internet service to AT&T U-Verse, but it’s not clear to me how to integrate the AT&T system with our existing Time Capsule/wireless set-up. The TV (with cabled DVR) is in our family room; the Time Capsule, printer & iMac are in the study. Do I need to move the Time Capsule - so it is directly connected to the AT&T ‘gateway’ box via ethernet cable - or - can I just attach an Airport Express module to the modem/router box and leave the Time Capsule where it is? (I plan to turn off the wireless function on the AT&T device.)

No, we have a mix of 802.11g & 802.11n devises, so it looks like I will need to use the WDS option
Yes, this is your only option here.
can I 'create' a (Apple) WDS network rather than 'participate' in a (2Wire) network?
Maybe I am mistaken, but I sense that you may be thinking that you can somehow combine the 2 Wire and Apple networks together in a WDS setup. This is not possible since they are not compatible for this purpose.
You will configure the main Apple router to "participate in a WDS network". There is no other way to set it up if you want to use WDS. It will be configured as the "main base station" in the setup.
You could leave the 2Wire network "as is" and use it for guests or some other purpose. There is some concern though about having different networks in close proximity due to likely interference effects between the devices.
(2) Can I use an Airport Express device in 'relay' mode and also use it to stream AirTunes to the stereo?
Yes
I'm also wondering if the 2Wire device & the TC should have the same password and security (WPA2), so the NetQuakes seismograph in the garage can 'see' the internet through both devices. But perhaps a question for another day...
OK to use the same WPA2 Security, but having the same password for two distinct networks may cause some confusion.

Time Capsule - "wireless clients" mean what???

Similar Messages

Maybe you are looking for