Time Capsule wireless signal drops inexplicably

My MacBook Pro is less than a year old. I am online wirelessly via my room mate's brand new Time Capsule router, which is only 15 feet away. The Time Capsule has been here maybe 2 weeks. I always get 4 bars, except tonight the signal drops repeatedly to 1 bar. I can't see any reason why this would happen. I suspect a problem with 10.5.2.

A lot of things can interfere with your signal. A cordless phone operating at 2.4 GHz, a microwave oven, or another nearby access point will affect your signal strength.

Similar Messages

  • Not locking on to Time Capsule wireless signal

    I have a Dell laptop with Windows XP and recently purchased a Time Capsule. The Time Capsule is set up, I created a wireless network, and I can "see" the network, but oscillates between connected and not connected. And is currently acquiring the IP address. But it has been going back and forth like this for over 30 minutes. It says "Unknown Authentication Status."
    I've been trying to resolve for several weeks. I was using WPA2 encryption and I turned of the encryption after seeing a reply from Tesserax in a similar topic last year some time and I now have a solid connection. How can I get the encryption back on?
    I also have a linksys wireless router included to support my vonage connection.

    A lot of things can interfere with your signal. A cordless phone operating at 2.4 GHz, a microwave oven, or another nearby access point will affect your signal strength.

  • Lost internet connection via time capsule, wireless signal grayed out. What may be wrong?

    My mac mini started intermitently losing connection to the Internet. Checked settings, look OK, no changes. Wireless signal icon in the menu bar is sometimes full sometimes grayed out (no connection at all). Other computers connecting via the same Time Capsule without any problems. I've serched forums and tried some suggestions to no avail. My mini is core 2 duo 1.83 GHz, 2GB RAM. Snow Leopard up to date.
    What may be wrong?

    Well, I reset the TimeCapsule to factory settings and configured it again for my home network and all works like a charm again.

  • Time Capsule wireless intermittent drop outs to PC and iPhone

    I have a Time Capsule that we use in our home as a wireless router and back-up. It is connected to a Comcast cable modem only. It has worked well, but about a couple months ago we started to have issues. Our iMac sees the Time Capsule through the wireless fine and has no connectivity issues. However, my PC laptop, that used to connect wirelessly, now has issues keeping a connection and so does my iPhone. The two devices will see the network and connect, but the connection drops out after a minute or so, then reconnects, and the cycle continues. I am not sure what to do to fix this and it makes me even more confused since our iMac has no issues with the wireless connection. Has anyone experienced this issue? Thanks!

    All that is Ok, and TIvo says I am hooked up correctly. THey say this is the problem, they can look at the box to see the error #.
    The following ports (whether inbound or outbound) must be open to allow your TiVo box to communicate with the TiVo Servers, other TiVo boxes, and your Macintosh or Windows PC:
    TCP port 37
    TCP port 80
    TCP port 443
    TCP port 2190
    TCP port 4430
    TCP port 5222
    TCP port 5223
    TCP port 5254
    TCP port 5354
    TCP port 7287-7297
    TCP port 8000
    TCP ports 8080-8089
    TCP port 8101
    TCP port 8102
    TCP port 8181
    TCP port 8200
    UDP port 37
    UDP port 123
    UDP port 2190
    UDP port 5353
    In addition, TiVo Desktop for Macintosh computers requires at least one of the following ports to be open for communications: 8101, 8102, or 8200.
    Didn't locate any information about this.

  • Time capsule, wireless signal goes away

    My old TC died last week(power supply prob) and I bought a new 2TB TC.  I am having a problem where the wifi becomes unavailable and I need to power off/on the unit to get things working again.  Any ideas?

    Ok that is actually pretty serious. Did you also lock the channels??
    Remember the TC can swap channels at the drop of a hat.. and do it rapidly so clients find it hard to keep up.
    DId you make sure the country is set correctly.. in wireless/ wireless network options??
    Otherwise I think I would take it back. Get the genius to test it for you.. how long does it take to fall over usually??
    Did you also check the log in the TC.. sometimes that is useful?
    I am guessing you updated the firmware when you started it.. I would also go back.. the latest firmware is definitely more buggy than previous one which was excellent. Just hold down the options key when you go to the firmware update in airport utility.. and you will be able to pick earlier firmware. For the latest 4th Gen there might only be one or two previous firmware.. go back one only.

  • New to Apple and Time Capsule Wireless

    I am a new apple customer.  I just bought my 1st iMac and I am trying to make the total break from MS.
    I have mediacom as my ISP and my present wireless router is a Linksys WRT600n (purchased about 3 years ago).  With this system I have had problems with coverage in my house as well as needing to reboot the device often.
    The router is located in a 1st floor bedroom and I get spotty coverage in the living room and even more spotty service in the adjacent kitchen.  The distances away from the router as the crow flies is 24 feet for the living room (involves 4 interior walls) plus 15 more feet (an another wall) to the kitchen.  Since we use our wireless system more in our living room and our bedroom (this is only 12 feet away and 1 interior wall), I have decided to move the wireless router to the living room and place it on top of a entertainment center.  My thinking is that it will provide better coverage to the areas where we use it (hoping to use Apple TV in both living room and bedroom).
    This leads me to my question: what has been the experience of the time capsule community in regards to time capsule wireless coverage and reliability?
    Also, please note that the iMac will be located in the same bedroom where I will be removing the current router and as such, the wireless backup capabilities of the time capsule will need to traverse the same 24 feet and 4 interior walls.
    Any feedback will be most appreciated.
    Harvey49

    The reliability of the Apple Extreme is very good.. TC much less good. 3years is often a failure point for stuff that runs too hot. Like your WRT600N and the TC with its Green Drive and internal power supply.
    On wireless range though I would say pretty ordinary. I have tested all the generations of the TC and most of the Extreme.. including Gen5. In my double storey house with an old G wireless modem router (downstairs extreme end).. right near the TC/AE whichever I am running.. from the other end of the house (upstairs) the old G wireless gives more than adequate signal to get full speed internet.. the TC does not.. And 5ghz goes pretty much to the next room and then disappears but that is as expected.
    Use the tests here to find what give good range.
    http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn (you can change the chart to give speed in the worst location ie F http://www.smallnetbuilder.com/lanwan/router-charts/bar/58-2_4-ghz-dn?see=P_F
    Airport extreme is there. Well down but there.

  • My MBP doesn't remember my Time Capsule wireless network when waking from sleep

    My MBP (OS 10.5.8) doesn't remember my Time Capsule wireless network when waking from sleep.  Thus, every time my MBP wakes from sleep, I need to select the Airport icon in the upper menu bar, select "Join other network", enter SSID and password.  This is very cumbersome.  And, I never had this problem when I was using the ISP's provided wireless router/gateway/DSL modem. Adding the Time Capsule and using it to generate the wireless network has introduced this problem. 
    It appears that this problem has to do with the hidden SSID.  I don't need the lecture on how hidden SSID provides no serious security benefit.  That's why I have the WPA2 encryption.  I'm interested in a solution that will allow the Time Capsule to generate the wireless network, maintain a hidden SSID, continue to use WPA2 encryption, but have my MBP recognzie and autoconnect to this network.
    Solutions I've alread tried:
    1. Open Network Preferences
    2. Select Airport from left hand column (and ensure Airport is at top of that list)
    3.  Select Advanced
    4.  Delete all Preferred Networks.
    5.  Apply settings.
    6.  Restart computer
    7.  Return to Network Preferences and from Advanced page, manually add my network with hidden SSID and WPA2 password
    This solution works fine as long as I don't take my computer elsewhere and connect to another network.  As soon as my preferred networks list gets another network, my MBP stops finding my TC network.  Since I take my laptop to a lot of places (it's a laptop, after all...) this is a problem.
    As I say, prior to adding the TC on my network (and using it to generate the wireless network), my MBP had no problem keeping 50+ preferred network names/passwords in the Preferred Network list, but always automatically finding/connecting to my home network without the need to "Join other network."  Thus, I assume the problem lies with the Time Capsule.
    Any ideas?

    LaPastenague, thanks for weighing in.  Didn't know that the hidden SSID capability was not IEEE standardized, and thus different devices will handle hidden SSID differently.  With my admittedly limited knowledge of how SSID/hidden SSID works, I'm still a little confused as to why my MBP would remember the generic router/gateway's hidden network, but struggle with the TC's hidden network.
    To my knowledge, when an SSID is broadcast by a base station (Airport, wireless gateway, etc.), a connecting device (like a laptop, iPad, etc.) detects this broadcast--this would be a passive reception of this SSID signal.
    When an SSID is hidden, the base station does not broadcast its identification.  Rather, a connecting device must transmit the name, and when the base station recognizes the broadcast, the connection is made. That's what you do when you select "Join another network" and manually enter the SSID.
    The idea with OS X's Network Preferences is that these steps, whether for hidden networks or broadcast SSIDs, become automated.
    Where is the potential for a different chipset between the TC and the previously used wireless router/gateway to alter this functionality?  Shouldn't the selection of an SSID by the MBP to broadcast to seek for a base station be a function solely on the MBP?  And once broadcast by the MBP, the TC should detect and reply? 
    Basically, the MBP can connect to the hidden TC manually just fine.  The MBP can connect to the old setup automatically just fine.  The MBP cannot connect to the TC automatically.  Aren't these automatic connection functions solely on the MBP?
    I'll try un-hiding the network and re-verifying that the problem is exclusively with the hidden network.
    Z

  • Extending Gen 1 Time Capsule Wireless network with Airport Express N

    I am having difficulty setting up my new Airport Express w/ 802.11N (SKU# MB321LL/A) to extend the wireless network from my Time Capsule (SKU# MB276LL/A).
    My setup is as follows:
    Time Capsule is connected to Cable modem with the following wireless settings:
    Wireless mode -> Create a Wireless Network
    Allow this network to be extended -> Checked
    Radio Mode ->802.11n (5Ghz N only)
    Wireless Security -> WPA2 Personal
    The issue is the when I attempt to setup the AE to extend the network. I match the settings to the Time Capsule:
    Wireless Mode -> Extend a Network
    Select the Time Capsule Network
    Allow wireless clients -> Checked
    Wireless Security -> WPA2 Personal
    However after I reset the AE the LED glows Amber and the following problem is reported:
    +Wireless Network+
    +This AirPort wireless device is set up to join a specific wireless network that can't be found. If you don't see the network that you want to join in the Network Name Pop-up menu, enter the network name and network password if necessary to try again.+
    When I check the Airport->Wireless tab the settings were as before.
    Any thoughts on this? Thanks.

    Welcome to the discussions!
    Have you tried to position the AirPort Express close, say 10-15 feet, as a test to see if it will connect that way?
    If so, then move it back another 10-15 feet, etc.
    5 GHz signals do not travel well or penetrate surfaces very well, so my first thought was that the signal was not strong enough for the Express to pick it up where you had it located.
    Message was edited by: Bob Timmons

  • Extend Time Capsule Wireless Range

    I am having trouble with my Time Capsule's wireless range. I am not a networking expert by any means. I own an old building that is 4 stories connected by stairs with thick walls. All the rooms ethernet cables converge in a cubby on the 3rd floor. I placed my Time Capsule in the cubby, but I couldn't receive a wireless signal from the 1st floor. This is ironic because I have an old Netgear G router that sends signals throughout all 4 floors. So I bought an Airport Express to extend my network wirelessly, but the signal has been unstable perhaps because the Time Capsule's wireless signal is too weak. So I want to connect the Airport Express on the 1st floor using the Ethernet link from the 3rd floor Time Capsule which is my main router. From my research, I discovered about WDS networks, which I believe you have to use in order to create a network with multiple Apple base stations linked through ethernet.
    I called Applecare who told me:
    -To connect from Time Capsule to Airport Express using Ethernet, must use WDS network. Setup Airport Express as Relay, NOT Remote.
    -Relay- Direct ethernet connection from Time Capsule to Airport Express, then wireless connection from Airport Express to Macbook.
    -Remote- Wireless signal from Time Capsule to Airport Express, then direct Ethernet connection from Airport Express to Macbook
    I have several questions for you wise people out there:
    1. To extend the Time Capsule wireless network using the Airport Express, but connected directly via ethernet, do I need to setup a WDS network?
    2. I prefer to just use the simple Apple settings "extend network wirelessly". Will this setting only boost a wireless signal received from the Time Capsule? Can it not extend a wireless signal sent directly from Ethernet?
    3. I'm considering getting a Quickertek Triband antenna to place outside the cubby. Anyone have any experience with Airport external antennas?:
    http://www.quickertek.com/products/timecapsuletriband.php
    Any information would be much appreciated! These networking issues have been giving me months of headache.
    Thank you!
    Alexander
    Specs:
    Apple Time Capsule 1TB
    Airport Express N version
    Connected with 2.4ghz. band to N capable Macs.

    Extending your network with an AirPort Express (AX) won't boost the TimeCapsule's (TC's) range per se. It will expand the network's range by adding another transceiver.
    If you'd prefer to avoid using Ethernet to connect the TC and AX, you might get a better signal on the first floor if the AX was on the second floor, i.e, roughly halfway between the TC and the 1st-floor computer. [Extending the range of an 802.11n network|http://docs.info.apple.com/article.html?path=AirPortUtility/5.1/en/ap21 24.html] describes how to configure them.
    If an Ethernet linkup is no problem, though, that should work even better. In this case, it's best to use different (by 3 or more) channels on the 2 stations to reduce the chance that they'll interfere with each other.
    Either way, it's best to use the same network name, network password, and encryption on both stations so you can roam freely through the building without needing to switch manually between them.
    [Designing AirPort Networks 10.5-Windows manual|http://manuals.info.apple.com/enUS/Designing_AirPort_Networks10.5-Windows.pdf] is another good resource you may find helpful.

  • Time Capsule wireless problem

    recently my TC which as been working fine, lost its wireless connection. I went back to the factory default settings and reset the entire system. My laptop "sees" the TC right away in Airport Utility but cannot read the configuration profile (times out). If I plug in an ethernet cord from the TC to my laptop everything works just fine. As soon as I unplug, nothing. Obviously, I am not getting a wireless signal from the TC.
    I unplugged the Airport Express unit I have b/c I was concerned about interference. I also reverted to 7.3.2 from the newer version.
    I have restarted the TC repeatedly with no improvement.

    Hi mmcb and welcome to the discussions.
    Sorry, I can't quite follow your description, so apologies if you have already tried this. Have you tried connecting the ethernet cable from your computer to one of the LAN ports on the TC to try to configure or re-configure it using AirPort Utility?
    As you describe, it does sound like you do not have wireless set up on the TC.
    When you have Airport Utility open, click on Manual Setup at the lower left of the pane. On the next window, click the Airport Icon at the top of the pane. Then click the Wireless tab in the next line below that reads Summary - Time Capsule - Wireless-Access.
    Check to make sure that the Wireless Mode is set to "Create a Wireless Network". You should see your wireless network name, radio settings security, and password. If not, you need to reconfigure them. See if that helps.

  • Time Capsule wireless speeds issue

    I recently upgraded my internet service to a 16 Mbps cable modem service, and am thrilled with the speeds I'm getting when my iMac or MBP is directly connected to the Time Capsule by ethernet. When connected in this fashion, I can easily download at 2.0 MB/sec or more. On wireless, however, there is a discrepancy I cannot explain. Although the iMac and MBP can transfer data over wireless between each other at speeds of several MB/sec or more, when I try to download from the internet over the Time Capsule wireless I get only 200-400 KB/sec. Obviously there's nothing inherently limiting the wireless to those speeds, so I cannot explain it. Using one of the older 1 TB Time Capsules at 2.4 GHZ, 802.11n (b/g compatible - no option to change near as I can tell), WPA personal, and I have an Airport Express N at the other end of the house to extend the range. Any thoughts?

    I'm sure this doesn't help you, but I think I have the exact opposite experience from you. When I connect to my Time Capsule with either ethernet or wifi, I can download from the internet at speeds of 14000Kbps, which is about 1.4MBps, I guess. For the LAN, if I'm connected via ethernet, I can get pretty phenomenal speeds. But if even one system is connected via AirPort, the speed drops to where I'm struggling to get 1KBps. It makes streaming to my AppleTV impossible - I need to decide a day early about any movies to watch. And syncing up iTunes between my desktop and laptop takes hours if done over WiFi as opposed to taking seconds if done over ethernet. So far I've found no option to select to speed things up. I hope you find an answer - maybe my problem is related to yours.
    For changing to 802.11n only, I've never found a way that would work either.

  • Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC?

    Can I copy my iTunes files and folders to Time Capsule wirelessly from my PC? I was wondering since my iTunes files and folders are connected to iTunes.

    You can but the TC is the worst possible location. The design is slow to start and quick to stop data connections.. that will cause trouble.
    Moving folders has specific instructions.
    http://support.apple.com/kb/ht1364
    Move it to an external hard disk fine.. but be very sure you will not be happy with the TC as a location.

  • How to Sync iPhone/iPad with Time Capsule (wirelessly)

    Hi - I am wondering if there is way to sync my iPhone or iDevices with Time Capsule wirelessly.  Please let me know if there is and how?
    Thanks in advance..

    The iOS devices....iPhones, iPads, iPods, etc.....sync to iTunes on your computer or to iCloud.
    See this Apple support document:
    http://support.apple.com/kb/ht1766
    It is not possible to sync iOS devices directly to the Time Capsule.

  • How to integrate AT&T U-Verse with existing Time Capsule wireless network

    I would like to switch from Comcast HDTV+Earthlink internet service to AT&T U-Verse, but it’s not clear to me how to integrate the AT&T system with our existing Time Capsule/wireless set-up. The TV (with cabled DVR) is in our family room; the Time Capsule, printer & iMac are in the study. Do I need to move the Time Capsule - so it is directly connected to the AT&T ‘gateway’ box via ethernet cable - or - can I just attach an Airport Express module to the modem/router box and leave the Time Capsule where it is? (I plan to turn off the wireless function on the AT&T device.)

    No, we have a mix of 802.11g & 802.11n devises, so it looks like I will need to use the WDS option
    Yes, this is your only option here.
    can I 'create' a (Apple) WDS network rather than 'participate' in a (2Wire) network?
    Maybe I am mistaken, but I sense that you may be thinking that you can somehow combine the 2 Wire and Apple networks together in a WDS setup. This is not possible since they are not compatible for this purpose.
    You will configure the main Apple router to "participate in a WDS network". There is no other way to set it up if you want to use WDS. It will be configured as the "main base station" in the setup.
    You could leave the 2Wire network "as is" and use it for guests or some other purpose. There is some concern though about having different networks in close proximity due to likely interference effects between the devices.
    (2) Can I use an Airport Express device in 'relay' mode and also use it to stream AirTunes to the stereo?
    Yes
    I'm also wondering if the 2Wire device & the TC should have the same password and security (WPA2), so the NetQuakes seismograph in the garage can 'see' the internet through both devices. But perhaps a question for another day...
    OK to use the same WPA2 Security, but having the same password for two distinct networks may cause some confusion.

  • IPhone 4S Can't see Time Capsule Wireless after IO6 update

    My iphone can't see my Time Capsule wireless network after upgrading to IO6.  My iPad3 works fine after upgrade.
    I determined that if I change settings on the TC to 802.11N(b/g) compatible it can see/connect.
    Seems to be a problem with the 802.11 5GHz band that the iPhone can't see after the IOS6 update.
    Not sure if this is the same issue that others are seeing but could be worth a try to change your router's radio config.
    Hopefully Apple sorts this out soon.
    Very annoying to upgrade and have existing networking break!!!!
    Bad Karma and I just ordered 2 new iPhone 5's

    Still having this issue - used to be able to connect prior to this update - The iPhone has no problem auto joining the local Cable WiFi - but still doesn't show the Time Capsule WiFi SSID's in the list. iPad and three other Macs see and can join the Time Capsule WiFi.

Maybe you are looking for