Time capsule with airport extreme

Good afternoon,
I'm trying to figure out how to configure my time capsule with my airport extreme and with all the rest as described below (see: "toys"). But the information I've gathered is somewhat dubious.
So I'm hoping someone can help me out.
My "toys" are: TimeCapsule, AirportExtreme, iMac, iPhone 4s, iPad, AppleTV, 2 laptops, a kidstablet and a PSVita.
And naturally this was/is all wireless and that seems to be a bit of a problem because if everyone is using the wifi-signal it says bye-bye.
The configuration I have in mind is:
modem --- wired --- timecapsule (wan???) --- wired ??? --- AirPort Extreme --- wired (???) --- iMac
and then everything else wireless
Is this a good configuration? Can I do better?
And do I have to change some of my settings in the process?
Already a big thanks in advance !!!

do I put the wire in to the WAN port of the timecapsule
Yes
and from the TC to the APExtreme LAN to LAN
Recommend LAN on the TC to WAN on the AirPort Extreme for consistency, although it does not really matter in this case.
and from APExtreme LAN to iMac?
Yes
The settings are latin for me so I haven't touched any of the settings
If you power off and disconnect the AirPort Extreme, is the TC wired to your modem now?
If yes, do things appear to be working OK with the Time Capsule and modem?

Similar Messages

How to Set Up Time Capsule With Airport Extreme and Airport Express

Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?

evelK wrote:
Just got a new 1TB Time Capsule. I want it to be the main base station for my network. I already have a network set up with an older Airport Extreme base station and an Airport Express to extend it. I am thinking that rather than setting up the Time Capsule to "join" the old network, the best approach is to disconnect the Airport Extreme and Airport Express and reset them. Then set up the Time Capsule as a brand new network and bring the reset Aiport Extreme and Express onto the new network as if my original network never existed.
Is that the right approach or am I complicating it? Can I just join the Time Capsule to the existing network and still make it the main base station for the network?
I'd first use AirPort Utility to "Save a Copy As" of your AirPort Extreme settings. Then disconnect it, connect the Time Capsule in its place, and use AirPort Utility's "Import" function to read those settings. (Both of those functions are under AirPort Utility's "File" menu.) You may have to adjust a few settings. Once you have the Time Capsule working as you want, you can reconfigure your AirPort Extreme unit as you wish.

Using a current Time Capsule with Airport Extreme and Airport Express Older generation

I am looking to achieve a fast local network that allows streaming of music and video. I have bought a Time Capsule to replace the Telstra router (Thomson Router) by linking it using ethernet cable and then set up a network that also uses and older airport extreme and express router (g standard).
It would appear that the local network speed is slow - how can I assess the connection speed in the local network - both wireless and for ethernet? I believe that there is a speed indication on my two older macs running OSX 10.5 but not in OSX 10.6. Is there a tool to assess the local network speed?
The current set up works less well than previously only using the Thomson router, so the initial results are very disappointing. Not even streaming music seems to work and it stutters to halt.
I had expected that the dual band functionality would allow fast local connections where needed. What do I need to change?
Thanks you.
Tom

Hi Bob,
The two old airports (extreme and express) are connected wirelessly to the time capsule base station with the following use:
- round extreme base station supports a printer only - remote WDS indicated in set up
- airport express supports remote speakers - set up does not indicate WDS status
I noticed in another note to provide a second network name to 5GHz network and connect the modern computers, ipad (seems to be able to connect) and apple tv to the 5 GHz network, leaving the other on the separate network. Also the two computers, apart from the laptops are connected via ethernet to use the GB ethernet, but I am not sure whether that speed is achieved or whether a firewire connection between the two would be better. use examples are:
1. Wirelessly I am trying to use three speakers - computer, apple tv and express - to have to listen to the same music in three rooms.
2. Over ethernet, I am using the the powermac as a file server to mac mini, but would like to be bale to access photo libraries (both Iphoto and Aperture) ideally over the network. It works well with starting the powermac in target disk mode but seems slow over what should be a very fast ethernet network.
The connection with the service providers router and time capsule is bridged - seems to be the only way of providing internet access - however, it also seems to allow for shared devices to be visible across the two time capsule and the Thomson network.
Obviously, this will need some more experimentation but any input would be appreciated.
Thank you and regards,
Tom
PS> Timezone wise I am currently living in Australia - must change my profile one day.....

Extending a network with Time Capsule and AirPort Extreme (via Belkin powerline)

Hello -
I've seen many topics about extending wireless networks here, but none seems to resolve the issue I'm having. I currently have a setup where a DSL cable modem is connected to a Time Capsule and I need to extend this network to another room using an AirPort Extreme.
I live in a very old apartment in Brazil and the walls seem to block the signal from one room to another, hence the need to extend it. Since wireless signal is very weak between rooms, I bought a Belkin powerline AV500 so I could connect both Time Capsule and AirPort using the electrical power at home (just installing a regular Ethernet cable between rooms is not an option).
I started with the basics: configure the Time Capsule + DSL as a standalone network, and it works perfectly within it's range. Then I connected the Belking powerline, plugged a MacBook via Ethernet on the other end and still got very good results (actually better speed than expected). Used it for a while with streaming and other network intensive tasks to make sure it could sustain the connection.
Finally, pluggned the AirPort Extreme on the Belking powerline and this is where the problems started. AirPort Utility 6.3.1 only gives me the option of extending a network wirelessly - it doesn't seem to give me the option of extending it via Etherenet (roaming), which is not good in my case. Luckly I had a copy of AirPort Utility 5.6 which seems to do the job (or I thought so), but it's still not working well.
Although I managed to configure both with the same name, it doesn't seem reliable and some devices (the iPhone 5, for example) are unable to connect and end up with a self-asigned IP address. I'm almost sure I'm doing something wrong on the setup, as I've seen a similar setup working before, so if anyone out there has any clue of what can be done, it will be much appreciated.
Attached the screenshots of both Time Capsule and AirPort Extreme configurations.
Thanks a lot,
-TM
AirPort Exteme:
Time Capsule:

Hello JuliaApple. Welcome to the Apple Discussions!
You have several ways to configure both base stations for what you are trying to do.
The simplest would be to configure the Time Capsule (TC) to "join" (AirPort Utility > Manual Setup > Wireless tab > Wireless Mode = Join a wireless network) your existing 802.11n AirPort Extreme Base Station (AEBSn). In this type of configuration the TC would perform as any other wireless client and not perform as a router. It will; however, still allow for both backups and sharing USB devices attached to it.

Airtune Over Ethernet with Time Capsule or Airport Extreme

Can the previous generation Time Capsule or Airport Extreme bridge an ethernet client to an Airtunes network?
Current Setup: I have an aluminum iMac wired to my Time Capsule; currently, I use the aluminum as a music server by connecting to several Airport Express clients over the the iMac's built-in Airport for Airtunes support.
Problem: I have 3-802.11g clients dragging my wifi network. I would like to dedicate the iMac's internal network to the g-clients so I don't have to use compatibility mode for my n-network. However, I will lose Airtunes speaker support when I use internet sharing over the built-in Airport. Airtunes does not appear to support the Time Capsule ethernet client.
Nodes:
-AE 802.11g (Airtunes only)
-AE 802.11n (Airtunes and USB printer)
-1st gen Time Capsule (Internet gateway, "creating network" 802.11 g/n,
-iMac 8,1 (Music server via internal wifi, wired TC client)
-Macbook 4,1 (wifi client)
-iPhone
-Canon MP620 (USB to iMac, wifi to Macbook)

Further to Bob's comments..
A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

Trying to set up time capsule with airport exteme. Apple advises to use manuel setup and click on Advanced. Then enter mobileme ID. I did this but Time Machine doesn't display anything on the capsule window.

Can't set up my time capsule on Airport Extreme (updated). Apple instructions are to use manual set up. Click on Advanced tab. Click on Mobileme and enter Mobileme ID and password. I did this. But Time Machine window is blank. Tryed to click on update window after entering Mobileme ID but Airport does not respond (turn of then on)

mickair wrote:
I have been experiencing some networking problems
Welcome to Apple's discussion groups.
I have the latest Time Capsule ("TC"), an old Airport Extreme Base Station ("AEBS") bought in 2007 and 2 Airport Expresses, one bought in 3 months ago ("AE-Alpha") and the other bought back in 2007 ("AE-Beta"). All of them have been updated with the latest firmware.
Based on those dates, the AirPort Extreme is probably flat (as opposed to dome-shaped), making it 802.11n-capable. The Newer AirPort Express is probably an 802.11n-capable model A1264, while the older one is probably a model A1084 or A1088.
I use {the TC's} DHCP function ... to avoid unauthorized use.
This a discussion for another thread, but that's not what DHCP is for.
The wireless setting for it is to participate as WDS Main, but after reading various posts, it seems WDS is a bad idea
With that older AirPort Express you're stuck with WDS unless you decide to replace it with a newer model.
The AEBS is currently setup as being a WDS Relay at the moment
Why a relay? That's only needed if there's another base station "beyond" it that is configured to depend on it.
Since the AEBS is connected to the TC via Ethernet, you should probably configure it as a "roaming network":
http://discussions.apple.com/thread.jspa?threadID=2273124
{The AE-Alpha} connects fine as WDS remote at the moment
I don't have any experience with mixed WDS and non-WDS networks, but since it's 802.11n-capable, you may be able to configure it to "extend" the network of the TC rather than as WDS. Look for a setting on the TC to "Allow this network to be extended".
Physical location:
AEBS in one end, TC and AE-Alpha in the middle while AE-Beta on the other end.
A device such as "AE-Beta" that's supposed to extend a network shouldn't be "at the end" but should be half way between the central base station and the clients that need an extended network.

Should I get a Time Capsule, an Airport Extreme, or a Linksys Wireless N?

Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
Is a time capsule going to perform the same as a Linksys? Which router is better?
what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
If I get a Time Capsule then do I still need a Linksys router? Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
Any help is greatly appreciated.

Stuart Lawrence wrote:
Hi I have several questions before I make my purchase. I've got 2 computers in my upstairs bedroom that are wireless. I currently have a Wireless router which is a Linksys WRT54G.
It's already getting on in age so I was thinking of replacing it with a better wireless router. I'm deciding weather I should go with a Linksys N or go the apple route.
Will I get faster internet if I go with a Linksys Wireless N? What is the difference between G and N?
Enough of a difference for it to be worthwhile.
I was thinking of getting a Time Capsule because I wanted an automatic backup of my data.
The backup app is Time Machine, not Time Capsule. TM can work with any external HDD connected to the Mac, but only TC is officially supported for wireless backups by Apple. Hacks are possible to connect a USB HDD to an Extreme.
Is a time capsule going to perform the same as a Linksys? Which router is better?
Better if we are talking N vs. G.
what is the difference between Time Capsule and Airport extreme. Are they basically the same with the only difference being the hardrive?
Yes, but that is a significant difference.
If I get a Time Capsule then do I still need a Linksys router?
No.
Is it easy to setup a wireless network using a Time Capsule or Airport Extreme?
If you can setup your Linksys, you should be able to setup the AirPort as well.
Last question. My mom's computer upstairs uses a Linksys Wireless G usb adapter. It is also getting on in age.
The connection is always labeled as low and sometimes she can't go on the internet. What would be a much better wireless adapter for my mom's computer?
Sorry, none off the top of my head. Maybe you can provide the details on the computer she has.

Time capsule and airport extreme!!! or something else?

Hi
i have been looking into a new wireless device but do i really need a time capsule or a Airport extreme or is there something better out there?
thanks

Thanks for the additional info.
The AirPort Extreme would support a hard drive, but unfortunately Time Machine backups are not supported by Apple to a drive at the USB port of the AirPort Extreme, so to meet both of your requirements, you would need to look at either the 1TB or 2 TB versions of the Time Capsule.
In addition, either the Time Capsule (or AirPort Extreme) would provide you with simultaneous dual band wireless capability, so you'll have a 5 GHz band for faster, newer devices and and a traditional 2.4 GHz band for slower devices. With this type of setup, the slower devices will not slow down the faster devices on your network.
There's a Guest Network feature as well if you plan to use the Time Capsule or Airport Extreme or Time Capsule as the main router on your network.

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone?

Is it possible to use time capsule or airport extreme as a wireless hard drive for iphone.
I would like to strem movies from the hard drive to iphone.
I have already seen the Goflex Stellite, which works this way.
Is there any other device that could do this?

I did a typo. My current computer is a 2010 1/2 iMac. The stand alone monitors are still out of my price range so I'm looking for other options. By buying an external hard drive and a broken iMac, I'm still ahead. Still, if I understand you right, the 27" 2010 and earlier iMacs would be possiblities.
Are there adapters that would allow me to run a 2011 and newer iMac as an external monitor from my 2010 1/2. There are so many adapters out there these days.

What is the default ip address for the Time Capsule and Airport Extreme?

What is the default ip address for the Time Capsule and Airport Extreme?

Open Airport Utility to find out the real IP address of the network connection. DHCP addresses are assigned by the router in the range chosen in Airport Utility.

Troubling extending wireless network with Time Capsule and Airport Extreme

I am trying to set up and extend a wireless network in my house, but it’s not working right. I have two Airport/Capsule units in the house:
2TB Time Capsule (Dual-Band II)
1 Airport Extreme (Dual Band)
I have the Verizon Fios router as my gateway to the internet, and also as my DHCP server. I have also tested the ethernet ports in my house to verify that they work, and that I can get a DHCP-issued IP address.
Now, my Verizon router has WiFI, and it’s still on. I am not using it though except to troubleshoot. So far as I understand, this should not cause a problem.
Base station setup
So I setup the TC to Create A New Wireless Network, on the ethernet network it’s on (Dlink switch plugged into Verizon router). I set it up in Bridge Mode (as opposed to having it dole out IPs, since the Verizon router does this already). The TC gets a valid IP, and my wireless device connect to it without a problem. I have checked “Allow this network to be expanded” under Wireless settings.
Extended station setup
The AE Dual-Band is plugged into the Ethernet, and is reset to Factory Settings. I name it “Airport Extreme 2” and I chose “I want Airport Extreme to join my current network.” The other two options are: “I want to create a new wireless network” and “I want to replace and existing base station or wireless router with Airport Extreme.”
I chose to “join,” I select “I want to connect Airport Extreme to my network using Ethernet to extend my existing wireless network.” The other options are to disable wireless entirely, or to “wirelessly join my current network.” On the next page it asks me to select the device or network that the Airport Extreme will connect to using the Ethernet. I set it to the Time Capsule.
Results:
Access near the Airport Extreme 2 is incredibly slow. Speedtest shows I am getting less than 1Mbps. Worse yet, my mail client won’t connect. It just times out.
What I had hoped was that the AE would connect via Ethernet to the network, and just bring the wireless network to the other side of the house. Instead it almost seems as though it is just re-amplifying the TC’s signal. Otherwise, why is performance so bad?
Thanks to anyone with some insight here!

Hello Kennuff. Welcome to the Apple Discussions!
Since you have the ability to connect all of the routers by Ethernet, there is no need to configure the Time Capsule (TC) & 802.11n AirPort Extreme Base Station (AEBSn) for a dynamic WDS (aka, extending a network). This option is only when the routers do NOT have an Ethernet connection between them.
Instead, you want to configure the TC & AEBSn in a "roaming" network. I suggest starting by performing either a "hard" or "factory default" reset on both.
Next be sure that both the TC & AEBSn are on the same Ethernet subnet coming from the Verizon-supplied router.
Configure the TC & AEBSn as follows:
AirPort Utility > Select the TC or AEBSn > Manual Setup > AirPort > Wireless
o Wireless Mode = Create a wireless network
o Allow this network to be extended: <not checked>
o Radio Mode: <leave the default or if you require a specific mode make sure both routers are configured the same>
o Wireless Security: <configure both routers the same>
AirPort Utility > Select the TC or AEBSn > Manual Setup > Internet > Internet Connection
o Connection Sharing = Off (Bridge Mode)

Which to buy? Time capsule or Airport Extreme with USB drive(s)?

I'm getting either a TC or an Airport Extreme with an external drive.
Archive:
I noticed that TC can archive to an external drive. It seems this can be handy for creating off-site backups. Can I do this with a drive on Airport Extreme (with a powered hub and another drive)? Or do I need to move the drive to a Mac and copy there? Or should I use a network backup instead in either case? I guess this is my main question: Can archive work with Airport Extreme?
Mounting:
Is mounting the Airport Extreme for WiFi range any easier than the TC?
Drive failure:
Is the TC drive likely to fail over the next couple years? And the other way, if the TC breaks, is the drive something I can use elsewhere? I'm a little concerned about having all my eggs in one basket.
Other:
Anything I should be aware of in making this decision?

+Are there any constraints in the orientation of TC that the AirPort Extreme does not have?+
No, not really as long as you give either device plenty of airspace as they both tend to run warm to very warm. I thought mounting the AirPort Extreme might improve the signal strength a bit, but it made no measurable difference for me.
+Is the TC significantly heavier?+
The Extreme is under 2 pounds, the TC comes in a bit over 3 pounds.
+Is mounting on a pegboard bad for the HD?+
I think you may be asking if you can mount it vertically. That's not a problem and the Apple store even sells wall mounts for either device.
+Yikes. I got bad info. I read the "unsupported" constraint was dropped a couple versions ago. I thought all the comments on this were referring to the older versions of AirPort Extreme.+
Here's the Apple document. Nothing changed with Snow Leopard and I saw a specific Snow Leopard document about this...just can't find it at the moment. I'm sure other forum regulars will confirm as well if they see this post.
http://support.apple.com/kb/HT2038
+Is there a list of file servers that Time Machine is compatible with?+
Sorry, I don't have first hand knowledge on that and my policy is to only offer advice on things that I've done myself. That question might be worth a separate post since few people will see this question buried where it is.
Message was edited by: Bob Timmons

How to set up 6th Generation AirPort Extreme to cable modem as a wireless router and then connect my 3rd Generation Time Capsule to AirPort Extreme as a wireless extender?

What is the best way to set up my 6th Generation AirPort Extreme (A1521) to my cable modem as a wireless router and then connect my 3rd Generation Time Capsule (A1355) to my AirPort Extreme as a wireless extender? I live in a small 1 story house and I currently have the Airport Extreme connected to my cable modem in the living room and the Time Capsule plugged into the wall in my bedroom. I am able to wirelessly connect to the internet using the AirPort Extreme as my router and I can also do wireless back ups to my Time Capsule. My problem is that my connection seems to be really slow! My 1TB Time Capsule back up is only half way complete and it has been 3 days! My computer has been backing up all day and night for almost 72 hours and its still not even 75% complete. I have backed up to this Time Capsule in the past and it never took this long. I am thinking that when I set up my AirPort Extreme and Time Capsule using AirPort Utility I must have set it up incorrectly or something.
How do I set up my Airport Extreme and Time Capsule for the fastest possible internet speed and back up speed?
Thank you,

AirPort Utility 5.6 works with AirPort Extreme 802.11g base stations.
It works with N version airports.
It will also show details of the AC model but cannot be used for the setup.. mostly.
I purposely got the new 6th Gen Airport Extreme so my internet connection would be a lot faster!
Your network will be much faster when you have AC client directly connected to the AE. Older client will go no faster.. but what is worse.. extend wireless is mixing new and old wireless standards.. guess what one wins.. OLD.. So when you extend wireless.. you have no improvement whatsoever. This whole post is about extending wireless.. so you cannot extend to older equipment and do any better.. maybe slightly better signal although from your comments that isn't happening either.
I would rather not have to use an ethernet at all with the TC and I don't know EOP adapters are!
If you do not use ethernet then you are going to be forced to accept slow speed.
EOP (ethernet over power). Also called homeplug in the US.
http://en.wikipedia.org/wiki/HomePlug
Provides a method of networking over power cabling that already exists in your house.
So what your saying is for the fastest internet speed and back up speed possible I should keep my Airport Extreme plugged into my Modem and keep my TC set up as a wireless extender? Then when I want to do back ups I should plug an ethernet cable from my TC to my MacBook Pro?
To spell this out.
A wireless link to an extended device will go very slowly.. if it is not direct.
So lets say you have a laptop sitting in the lounge.. Your connection goes.. Laptop- - - - - AE- - - - -TC.
That means two wireless links.. wireless has this nasty half duplex and single channel nature.. it can send or receive (Tx or Rx) but not at the same time.
Ethernet by contrast does both at once. It is full duplex.
Wireless can talk to one client at a time.. so if there are multiple items using wireless lets say 4 devices.. then your computer gets a 25% time slice. Since wireless cannot handle multiple simultaneous connections.
Ethernet by contrast can connect multiple computers to multiple destinations at the same time.. all transmitting and receiving at full speed.
When you put all this together.. there are a couple of rules for fast connection.
1. Use ethernet at all times. Where you cannot use ethernet use anything but wireless.. eg EOP (homeplug) at least to try and get rid of wireless.
2. Where you must use wireless use it sparingly and make sure it is never more than one hop.. ie never have an extend wireless (repeater is more usual term). Repeater will cause instant slowdown of 50% and maybe up to 75% just because it is so inefficient.
3. Fastest wireless is 5ghz but it has very short range.. you need to be up close and personal to get it working.
Apple routers however unless you do manual setup I suggest are set to connect to best signal strength not best speed. It will therefore use 2.4ghz at 25% less speed than 5ghz because it is 1db better signal.. this madness means you need to setup manually for the best setup.

Airport Time Capsule and Airport Extreme connection

I have replaced an Airport Extreme in my study upstairs by a brand new Airport Time Capsule 2T. It is the Airport Time Capsule that is connected to the Internet. The Airport Extreme has been moved downstairs and connected to the Airport Time Capsule by an Ethernet cable (run in a ventilation channel).
First, I configured the new Airport Time Capsule alone (without the Extreme). Then, I connected the Extreme and, unfortunately, configured it as a new network. Now, I would like to undo the last step and have, as they should be. both the Time Capsule and the Extreme in the same network.
The Airport Utility does not like it. Obviously, I am not doing things correctly.
1. Should I reset both the Time Capsule and the Extreme, in what order and how ?
2. How to delete unwanted networks from the list ?
Regards - Kris

You do not have to change the TC.. leave it as the standard setup.. as long as it is right.
Reset the AE to factory and try again.. or just manually edit it.
Click on the AE in the airport utility then click on edit.
Go to the network tab and make sure it is set to bridge.
Go to the wireless tab.. and setup .. create a wireless network.. NOT EXTEND.
Use identical Wireless Name to the TC.
Use identical Security setting (WPA2 Personal is only valid one really).. and same password as the TC.
Then update your AE.. it is now part of the same network with the same wireless name..

Extending a time capsule with airport express twice

Hi,
I have been trying to extend my existing wireless network recently but it never ended up how I wished...
I have one 4th generation Time Capsule (A1409) and two Airport Express 802.11n (1st generation A1264).
All currently have MAC Address base authentication and no security in place for was of testing (security not relevant at this point in time).
When I extend my Time Capsule with either Airport Express this works like a charm, the LEDs are all green and connection works for client devices.
When I extend my Time Capsule with both Airport Express the same applies, everything works.
However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express. While all LEDs are green and the second Airport is seen in the Airport Utility, I find no client are ever able to connect to it and alway either connect to the first Airport Express or to the Time Capsule. This is an issue I the area I want to cover is pretty big and I need the second Airport Express for the additional reach.
I haven't found anything against this setup, it however appears you can't connect to the second Airport. The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
However no connection seam possible to Airport Express two.
I have swapped Airport Express one and two, and in this case Airport Express gets the clients and Airport Express one now extending Airport Express two gets none.
Is this an expected behavior, i.e. should I give up or is there anything I can do about this ?

However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express.
Apple's "extend a wireless network" feature will only allow you to extend the signal one level, not two. It's possible to have more than one device extending the signal, but each extender must connect directly to the main base station.....not to another device that is already extending the signal.
The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
This is an illusion. AirPort Express is "joining" the wireless network.....not extending it. When the Express "joins" a network, it can be used for AirPlay, or a remote printer could be connected to the USB port, but the Express will not provide any additional wireless signal coverage when it joins a network.
Is this an expected behavior
Yes. I can try to look up Apple's support document that explains this if you want more information, but you may likely already have all the information that you need. Let us know.

Time capsule with airport extreme

Similar Messages

Maybe you are looking for