Time Capsule with Backup unable to be connected to and restored

I have recently rebuilt my iMac to 10.6.8 - I was previously on the same OS but wanted a clean install.
My entire mac was backed up to a 3tb Time Capsule
Having rebuilt I would like to restore some data from the Time Capsule but the iMac is now refusing to see any data on the time capsule.  When I manage the Time Capsule from Airport Utility I can see that there is about 1gb used.  If I share the disc and allow connectivity I can even see the sparsebundle, but Time Machine and Migration Assistant do not see a valid Time Capsule with data that can be restored from.
I am not 100% that I have anything stored here that I can recover elsewhere.  The key data was stored in multiple places as I never like to rely on 1 - however I would like to get to the bottom of this as I want some confidence in this for the future.
Any advice welcome.
Paul

The problem is that Migration Assistant doesn't recognise ANY backup partitions on the Time Capsule.  I can see the Time Capsule drive and when I select them I have to provide a password but it fails to connect or fails to find a usable backup.  But as I mentioned if I manually connect I can see the sparsebundle.
I'm quite happy to start again, but really want to recover some of the data on the drive.  If I can't recover now under these circumstance (ie voluntary rebuild) I will have no confidence that the TC will be there when needed under an involuntary rebuild.
The machine has been rebuilt under exactly the same machine name and administrator names, although I guess these could both have unique identifiers.
Paul

Similar Messages

  • I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

    I was just wondering if I can use time capsule with my iphone for both back up and to access the hard drive on the capsule?

    I don't think backup is supported but you may be able to access the TC's internal drive, from the iPhone, with an application like: NetPortal
    Note: I haven't actually tried this app, so if someone else has and was successful in accessing the TC's drive they can certainly chime in.
    Follow-up. Just downloaded and installed this app ... and I can now verify that it, indeed, can access both my TC's internal and externally attached USB HDD.

  • Network C7280 through Mac Time Capsule with iMac Snow Leopard, MacBook Pro S and Compaq W7

    The HP works fine with the iMac desktop, but the 2 laptops won't print, although they seem to be recognizing the network. Says printer not connected. The HP Photosmart C7200 Wireless Network Test Report and Configuration Page seem to be normal and functional.
    This question was solved.
    View Solution.

    If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
    Go to Applications/Hewlett Packard/ click on HP Uninstaller
    Click on Continue
    Highlight your device on the left pane
    Hold the Ctrl, Opt and Cmd keys and click on Uninstall <<<< Scrubber Option
    There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
    Click Continue and let it finish
    Restart your Mac
    Now reset the printing system:
    - Sys Prefs, Print & Fax
    - Right (control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Time Capsule with two external USB harddrives (only 1 is recognized).

    I have a 1TB Time Capsule with two MacBooks, a Mini, an AppleTV, and 1 Vista PC, connected to it without any problems. I've also added a USB2 hub where I have plugged in a Canon printer, 1 500GB Seagate drive, and 1 1TB Lacie (BigDisk) drive. For some reason the 1TB Lacie drive does not appear as an available drive on the Time Capsule but the Seagate drive works fine.
    I've formatted the Lacie drive multiple ways (currently it is Mac Extended (Journaled) with a single partition) but this did not change anything. I can plug the Lacie directly into any of the MacBooks or Mini and it appears as an available drive. What gives? Does Time Capsule only support 1 external drive? Thanks for any assistance.

    Thanks for your post. I did as you suggested and plugged the problem drive directly into the TC and sure enough the drive appeared and was accessible. It appears that the problem follows the USB hub. I tried a second hub (but it was only USB1.1 capable) and it had the same problem. I will take this up with LaCie.
    Thanks again for the response.

  • Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule?

    Can I increase the capacity of Time Machine with an external hard drive connected to Time Capsule via the USB port?  My current Time Machine has a total capacity of 1TB.  I'd like to double or triple its memory.  I don't want to use the external hard drive in lieu of the Time Capsule hard drive.  I'd like to use it in addition to.  Just don't know if/how it's possible.
    This is another one of those questions that I've searched the web for answers, and have gotten tricky answers back.  So now I'm trying to introduce a clean slate to the mix.
    Thank you for your time!

    Well, what you mentioning is possible.  However, I don't know whether it's supported (as in, "easy to set up.").  Time Machine officially supports backing up to a locally attached drive, to a machine running a Time Machine server (i.e. running OS X Server software), and to a Time Capsule.  I don't know that it officially supports a drive attached to an AirPort or to a Time Capsule.  Though I know some people have gotten it to work.
    Best I can say is to try it.  Plug the drive into the Time Capsule, ensure it's shared on the network, and then try and set it as a backup target from a machine in the Time Machine backup panel (you'll need to ensure it's mounted first).  If it works, you're all set.

  • How do I connect my time capsule with a Lynksis wi fi netwotk?

    How do I connect my time capsule with a Lynksis wi fi netwotk?

    You cannot extend or repeat a non-apple router in an apple router..
    You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

  • How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac?

    How can I see the old backups of my previous Macbook done by Time machine in a Time capsule with my new iMac? I've changed from a Macbook to a iMac because that one stopped working and I cannot use it anymore. I've been able to import all the data of the last backup of the Macbook when setting the new iMac, but I cannot access now to the old backups of the Macbook and there are information that wasn't in the last backup and I would like to recover. Thank you very much.

    Yes, you can ..
    Read Q17 here.
    http://pondini.org/TM/FAQ.html
    Strongly recommend his whole section.. 14-17 and read it carefully to understand the ways you can make TM work for you.

  • I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

    I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

    On your Mac.......
    Open Finder > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, then click Edit in the smaller window that appears
    Click on the Disks tab at the top of the window
    Click Erase Disk
    On the next window that appears, select the Quick Erase option, then click Erase
    The operation will only take a few minutes.
    Now you are ready to start new backups of both Macs.  Back up one Mac first, then back up the other.  Do not try to back up both Macs as the same time.

  • While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps back.

    While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?

    Hi Vidbrent,
    If you are having issues updating or restoring your iPhone, you may find the following article helpful:
    Apple Support: If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Regards,
    - Brenden

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • Connect apple tv to time capsule with ethernet?

    How do you connect apple tv to time capsule with ethernet?

    Oh, that's so sad. . Im sorry, but this problem requires professional help. At least I can't help you. Here is a link to Apple - Support - Contact Support.

  • You must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    you must have connected the Time Capsule with a router that does not work with my direct cable from my ISP

    I tried to answer in your other post.. please stick to one thread ..
    What method of internet do you have.. is this fibre install.. if so the TC should just plug in and use dhcp in router mode.. press and hold the reset and it will go back to router mode by default.

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • Can i connect my time capsule with my router as a bridge ?

    can i connect my time capsule with my router as a bridge ?

    I am a bit lost .. did you work this out?? You are running a second thread.. and answered it with this question.
    The TC can be bridged.. plug it into the main router by ethernet and run it in bridge mode.. that is router bridge.
    Do you mean wireless bridge??
    If you mean wireless bridge the answer is maybe but unlikely.
    If you setup the TC to join a wireless network.. it becomes a dumb client not a bridge.
    So to get it to wireless bridge you need to use another apple router.. that is the only way to get them to work.
    If you want specifics ask specific questions.

  • Time Capsule with (2) AirPort Express connection problem

    I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

    The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
    The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
    Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

Maybe you are looking for

  • Failover not working correctly on "redundancy-phy" (box to box style)

    Hi, I've got 2 CSS 11506 boxes configured using box to box failover.   Failing the master CSS box itself (powering down) causes the backup CSS to become master and all is well. However when the switch, which the CSS is connected to, fails the CSS did

  • Red frames in export with version 7.2.1

    Sometimes when I export a material appears in any part of the video a red frame. Would i like to know what to do to solve my problem? I have a MAC PRO OS X 10.8.5 and i'm using premiere pro cc 7.2.1. Thanks!!

  • Cannot drag and drop file from photos app to photoshop

    Hi, I'm trying to open a file saved in my Photos library in Photoshop. Previously in iPhoto I could drag and drop the file to open in other applications including Photoshop but this functionality appears to be missing in the new Photos app. Am i miss

  • Created my first app in app studio but can't upload in dev center

    Hello, I created my first app in Windows App Studio.I generated a publish package containing a zip file that contains an appxupload file. But when I try to upload it in the windows Phone dev center i can only upload XAP files?? What am i doing wrong?

  • Hot backup slow

    Hi, I am working in oracle8i.We are using hot backup in our database. Normally it takes 2 hrs to complete the backup process. but today it took 5 hrs to complete the backup process. Kindly let me know what are the possible ways to identify the soluti