Time Capsule with D-Link USB Adaptor ?

A PC-HP pavilion slimline had to come in to my house and I want to connect it to our network. I will have to stick in a USB Adapter to do it. I already found 2 of them. Both works on 802.11n. One gets til 300 Mbps and the other one only until 150 Mbps and I can't find the specifications of my Time Capsule 1st Gen 500GB to decide on which one to buy. Any help ? thanks !!!!

150Mbps is called N lite, it is limited to single stream.
Apple limited the Gen1 TC to use either N at 5ghz (300Mbps) or N lite at 2.4ghz. All apple routers have been limited to single stream, on 2.4ghz although you can get slightly better speeds out of modern versions.
So if the N lite is cheaper buy that. If they are same price buy the 300N.. but it will go no faster.
The antennas in the 300N might be slightly better. Do not buy or use USB wireless sticks if the range is far, or it is through many walls.
A much better solution is to buy a $20 (or thereabouts) Gen1 or Gen2 Airport Extreme from ebay or wherever you buy second hand apple stuff. And use it as wireless bridge. Plug the HP into it by ethernet. Voila, far superior wireless link at the same price.. and something that is more useful as it is wireless extender for the whole house.

Similar Messages

Time Capsule with two external USB harddrives (only 1 is recognized).

I have a 1TB Time Capsule with two MacBooks, a Mini, an AppleTV, and 1 Vista PC, connected to it without any problems. I've also added a USB2 hub where I have plugged in a Canon printer, 1 500GB Seagate drive, and 1 1TB Lacie (BigDisk) drive. For some reason the 1TB Lacie drive does not appear as an available drive on the Time Capsule but the Seagate drive works fine.
I've formatted the Lacie drive multiple ways (currently it is Mac Extended (Journaled) with a single partition) but this did not change anything. I can plug the Lacie directly into any of the MacBooks or Mini and it appears as an available drive. What gives? Does Time Capsule only support 1 external drive? Thanks for any assistance.

Thanks for your post. I did as you suggested and plugged the problem drive directly into the TC and sure enough the drive appeared and was accessible. It appears that the problem follows the USB hub. I tried a second hub (but it was only USB1.1 capable) and it had the same problem. I will take this up with LaCie.
Thanks again for the response.

Time Capsule with TP LINK MR3420 3G Modem

I am considering buying a IMAC and Time Capsule (TC), one of the reasons would be single vendor backup via Time Machine.
However my present network has a TP Link MR 3420 Router (TP), that handles a modem connection to a 3G Mobile Braodband Dongle.
I wish to keep this.
I have seen alot of discussion about connecting the TC in Bridge Mode, and still allow the TP to handle Network DHCP etc. Whilst this may work, a £249 TC relies on a £ 33 router ?
I have read about putting the TP into DMZ mode, swich off DHCP and foreward the traffic to a DMZ host IP Address.
How can this be configured in reallity, the present TP settings are
Lan IP 192.168.1.1 Mask 255.255.255.000
DHCP 192.168.1.101 to 192.168.1.999 default gateway 192.168.1.1
What are the principal Lan IP address for each device,?? do they both share a common lan address system, or each has a different Lan IP address system.
I would appreciate all help, advice and experiance
John Pierce

You basically cannot have two routers in the network.
Nor can you bridge the 3G router and still pass the IP to the TC.. as indeed most 3G do not allow that kind of setup.
You need the TC to have extensions to plug 3G wireless USB modem .. we will wait until doomsday before that happens.
Since you have to be dependent on a £ 30 router to control my home network so be it..
The actually ability of the router is not necessarily a big issue. The router in the TC is actually nothing particularly wonderful and the TP-Link will have a lot more ability.
Unless you run into some major issue I would just stick with the TC in bridge.
You can double NAT.. use DMZ as you suggest.
The problem here is that you are still totally dependent on the TP-Link NAT.. and you have added a second NAT to make it worse.
It is possible to setup the TC in a transparent mode where it is functional as dhcp but not double NAT.. this of course does make the TC appear as if it is the main router.. but it is appearence only.. the TP-Link is still the main router.
See https://discussions.apple.com/message/22695632?ac_cid=tw123456#22695632
For this method which is designed to avoid the DNS of the TP-Link more than what you are trying to achieve but the effect might do what you want.. Do not use DMZ.. or if you do, use the end computer IP which should be accessible to the TP link as the TC is not actually forwarding.

Using Airport Time Capsule with an external usb hard drive - how to connect

I have 2TB Airport Time capsule which is connected to my iMac by an ethernet cable and which I use for T.Machine backups - No problems here.
I have an old MacBook Pro running 10.6.8 and which is also connected to my T/C via wi-fi - again no problems.
But I understand I can use an external hard drive via usb cable connected via a powered hub, to the T/Capsule and which I wish to do certain backups from my MBP (I have no wish to update the MBP as it runs certain apps no longer available on the iMac (10.9.2)
Now the problem I have is trying to set it up, the MBP has Airport Utility 5.6.1 and I can’t continue as it says I need a newer version. As I see it, the newer version doesn’t work on the MBP only the iMac.
A catch 22 situation. If I continue and and go to “manual setup” then try update, all I get is “correct the problem before updating” (Allow setup over the internet using Bonjour).
Anyone have any ideas or images that I can view to try and get things going?
I should add that I wish to use my external hard drive not as a time machine backup but only for certain items using say, Super Duper, but am unable to get the disk to mount on the MBP
Alan

I still can't use it the way I was hoping because it then becomes a T/M back-up disk and not a normal usb/firewire disc.
You are first mounting the drive on the desktop, correct?
Not sure what you mean here.
You can drag/drop files normally or copy/paste files to the drive icon on the desktop, just as you would a normal drive that is displayed on the desktop.
Or, double click the drive icon on the desktop and drag/drop files into the open window there.
Tell us the steps that you are using to mount the drive on the desktop. What happens after each step?

How to use Time Capsule with USB HD attached

I recently bought a 500 mb TC, so am somewhat a newbie to it, and am already wondering if I should have bought the 1 Terrabyte model.
I am trying to figure out exactly how I can use the USB HD facility on the TC. Is the point of this that I can achieve extra Time Machine/Time Capsule backup-capacity automatically, i.e. if space runs out on the TC it will go to the USB HD automatically? Or do I have to choose this USB HD in Time Machine options?
Are there other ways of using the attached USB HD? For example to mirror the TC, for an extra level of safety. Or could I choose within Time Machine to backup only to this USB drive? Or could you use it as an additional Hard Drive that is nothing to do with Time Machine backups at all, just an extra HD accessed wirelessly?
Could you even add extra Hard Drives to Time Capsule with some sort of USB hub or in a chain.
I can't seem to find info about this in manual , so replies gratefully received.

funkster wrote:
I recently bought a 500 mb TC, so am somewhat a newbie to it, and am already wondering if I should have bought the 1 Terrabyte model.
The 500GB model is a much better value. As you've stated, you could add more HDD capacity when the prices come down.
I am trying to figure out exactly how I can use the USB HD facility on the TC. Is the point of this that I can achieve extra Time Machine/Time Capsule backup-capacity automatically, i.e. if space runs out on the TC it will go to the USB HD automatically?
No, TM cannot span from the current backup (internal TC HDD) to the USB HDD connected
Or do I have to choose this USB HD in Time Machine options?
Yes, you have to choose it. It also needs to be formatted HFS+ if it already isn't. You can only format the USB HDD when connected to your Mac. Disk Utility does not work on the TC HDD nor the USB HDD connect to the TC.
Are there other ways of using the attached USB HD? For example to mirror the TC, for an extra level of safety.
Yes, via AirPort Utility -> Disks -> Archive. It clones the internal HDD. It is NOT incremental.
Or could I choose within Time Machine to backup only to this USB drive?
No, TM cannot backup a NAS (i.e. the USB HDD connected to the TC).
Or could you use it as an additional Hard Drive that is nothing to do with Time Machine backups at all, just an extra HD accessed wirelessly?
Yes.
Could you even add extra Hard Drives to Time Capsule with some sort of USB hub or in a chain.
Yes.
I can't seem to find info about this in manual , so replies gratefully received.
Lots of good questions. You are right that the info isn't in the manual.

USB Printer with Time Capsule (with 802.11ac)

Hello Guys,
I have a Canon MP258 inkjet printer and it's not working with my airport time capsule (with 802.11ac) .
I had tried a lot of method to solve it but it can't be done.
Pls, help me to solved this puzzled.Thx
Best Regards,
Johnremy

If the name of your printer does not appear in the printer list when you click the + button, try contacting Canon Support to see if they have an updated printer driver that you could download and install.
Download Free Driver Pinter Canon Pixma MP258
http://filedir.com/drivers/printer/canon-pixma-mp258-mp250-printer-driver-downlo ad-516940.html
If this does not work, then Canon has not provided the printer driver for their device to operate on a network USB connection.
Do you understand that if you can get the print function working, that fax, scan, copy, maintenance, etc functions will not work when the MP258 is connected to the USB port on the Time Capsule?
Only the print function is supported on the Time Capsule, so if you need the other functions, you should connect the MP258 to your computer.....not the Time Capsule.

To add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC

Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB

4Buck5 wrote:
Want to add a 6 TB G-Raid (Mac os extended) ext drive to a 2Tb time capsule, using a powered usb with the TC usb port. Using the airport utility 5.6 on iMAC (10.7.3). Went to manual setup,then disk. Have options of the TC or 6TB. Won't allow update to the 6TB
I am not 100% what isn't allowed.. but I am assuming you want to spread the backup across the two disks.. internal TC and 6TB external.. this is not possible.. It has to be one or the other. TC has no way to build a raid JBOD or anything else. Nor would you want to as that is the most likely to fail and kill your data.
Let me add, backing up 6TB over USB on TC.. will be the most excruciating experience of your life.. cf child birth or passing kidney stones.. large ones.. being the male equivalent.

Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

Can I use time capsule with a USB cellular modem?

Can I use time capsule with a USB cellular modem?

No, since the USB port on the Time Capsule will only support a compatible printer and/or hard drive.

Is it possible to use Time Capsule with Apple TV? Without having our macbook pro, iPhones or iPads as middle link?

Hi there.
I wanted to buy a time capsule - But my big question is : Is it possible to use the time capsule with Apple Tv ( Newest generation.) without having an Iphone, Ipad or mac as middlelink?
So if I example want to have all our music and dvds on the Time Capsule and watch/hear it on my TV. Do I have to have one of our macbook pro's started up to get it to work?
Hope you understand what I'm trying to say here.. ? Hehe.
Best Regards
Christian

But then I can have all dvds and music on a time capsule and then run it via itunes on my mac and from there to the apple tv
Yes, if you move the iTunes Media Folder to the Time Capsule.
But.....if you move the iTune Media Folder to the Time Capsule.....how are you planning to back up this important data?
(You will lose everything in the Media Folder when.....not if....the Time Capsule has a problem and you do not have a backup copy.)
A much safer plan would be to keep the iTunes Media Folder on your Mac.....or add another hard drive connected to the Mac and move the Media Folder to that drive.
Then Time Machine will backup both your Mac and and hard drive. So, you have "originals" on one drive and backups on another.

Connect apple tv to time capsule with ethernet?

How do you connect apple tv to time capsule with ethernet?

Oh, that's so sad. . Im sorry, but this problem requires professional help. At least I can't help you. Here is a link to Apple - Support - Contact Support.

I am on my 2nd time capsule and cannot get usb port to work

I have replaced my old Airport Extreme with an with a 2TB Time Capsule. Everything worked except the USB port. I worked with Apple Tech Support and we determined the USB Port wasn't working so I took the 2TB Capsule back and they were out of 2TB models, so I came home with a 3TB Time Capsule. Everything works except the USB Port. I have tried printers, USB hard drives, Flash Drives, etc. to no avail. What am I missing? I know I didn't get two Time Capsules with defective USB ports.

The port is under powered.. this is often the experience people have.. you need to use a powered hub to get things to work. Why they worked on Gen1 and not Gen4 no idea.. but your experience is not unusual.
The TC is also pretty picky when it comes to hubs.. so not everything works even then.
Are you running SL as per your info..? That should be no problem but for Lion you need to download airport utility 5.6 to even see what is connected. There also could well be some issues in 7.6 firmware for the TC.

Extending a time capsule with airport express twice

Hi,
I have been trying to extend my existing wireless network recently but it never ended up how I wished...
I have one 4th generation Time Capsule (A1409) and two Airport Express 802.11n (1st generation A1264).
All currently have MAC Address base authentication and no security in place for was of testing (security not relevant at this point in time).
When I extend my Time Capsule with either Airport Express this works like a charm, the LEDs are all green and connection works for client devices.
When I extend my Time Capsule with both Airport Express the same applies, everything works.
However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express. While all LEDs are green and the second Airport is seen in the Airport Utility, I find no client are ever able to connect to it and alway either connect to the first Airport Express or to the Time Capsule. This is an issue I the area I want to cover is pretty big and I need the second Airport Express for the additional reach.
I haven't found anything against this setup, it however appears you can't connect to the second Airport. The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
However no connection seam possible to Airport Express two.
I have swapped Airport Express one and two, and in this case Airport Express gets the clients and Airport Express one now extending Airport Express two gets none.
Is this an expected behavior, i.e. should I give up or is there anything I can do about this ?

However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express.
Apple's "extend a wireless network" feature will only allow you to extend the signal one level, not two. It's possible to have more than one device extending the signal, but each extender must connect directly to the main base station.....not to another device that is already extending the signal.
The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
This is an illusion. AirPort Express is "joining" the wireless network.....not extending it. When the Express "joins" a network, it can be used for AirPlay, or a remote printer could be connected to the USB port, but the Express will not provide any additional wireless signal coverage when it joins a network.
Is this an expected behavior
Yes. I can try to look up Apple's support document that explains this if you want more information, but you may likely already have all the information that you need. Let us know.

Connecting Time Capsule with switch 10/100

Can I connect a Time Capsule with a Dlink switch 10/100 Wifi?

You can, but devices connected to the D-Link switch will drop to a maximum of 100 Mbps speeds. The Time Capsule supports 1,000 Mbps or Gigabit speeds.
If you plan to transfer a lot of files using Ethernet, the numbers speak for themselves.

Time Machine/Time Capsule with ext hard drive backup probem

I installed Time Capsule with no problems. A 1 TB LaCie hard drive is attached by usb cable to the TC. The LaCie is seen by finder and I can open, edit and save files to it and so can the Macbook Pro on my network.
Time Machine backed up my internal hard drive on my Mac just fine, but Time Machine refuses to see the external Lacie drive so it cannot back it up.
Here is the situation:
1. If I go to Time machine preferences and click Options there are no volumes or folders listed as Do Not Back Up. nothing is there.
2. If I click Change Disk the name I gave my Time Capsule is listed as it should be but the LaCie drive is listed also as if it were possible for me to back up to that also. The LaCie's name is there with the name of the Time Capsule in parenthesis. Isn't that odd?
3. When I select the LaCie icon on my desktop and select Get Info in the Sharing & Permissions section it says, "You have custom access" below it says
Name Privilege
(unknown) Read & Write
everyone No Access
I am new to Mac in general and this permission and sharing thing is still a bit mysterious to me so I don't know if these sharing & permission settings are usual or weird and could be contributing to why the back up of the LaCie drive is not happening.
This is the final hurdle I have in absolutely convincing my small but vocal office that switching to Macs all around was a great idea.
Any help would be appreciated.

External hard drives connected to Time Capsule are not backed up by time machine. I solved this by connecting the hd directly to my mac and sharing it. That's not the solution I was hoping for but it will do for now.

Time Capsule with D-Link USB Adaptor ?

Similar Messages

Maybe you are looking for