Time Capsule with Extreme and 3 Express

Hi, new to this. I just bought a Time Capsule, set it up to my router and ethernet to my iMac (works fine). Time Capsule to router with a manual configuration (fixed IP from ISP). I wanted to:
1- Get my old Extreme to connect wirelessly to my Network at a remote room. Then connect two more iMac's via ethernet to my Extreme.
2- Use my extremes to distribute my network through the house.
I've tried all possible combinations but keep failing at it. I don't know fi I should create a WDS, extend my network, share IP or distribute IP.
Can somebody please help me?

Hello coronelcb. Welcome to the Apple Discussions!
Since you will have a mix of 802.11n and 802.11g AirPort, you will not be able to extend the Time Capsule's (TC) "n" network wirelessly with the 802.11g AirPorts, but you could configure them in a WDS. Note; however, that for each base station in the WDS, the overall bandwidth of the wireless network will be halved ... so, with a total of 4 base stations, at best, you will get 54 Mbps/2x2x2 = 6.75 Mbps. Your actual throughput will be even less.
As as option, you could create a "Dual Band" network between one of the 802.11g AirPort Extreme Base Stations (AEBS), and then create a WDS between that AEBS and the other two. In a "Dual Band" network, the TC will provide a "n" network, and the AEBS will provide a separate "g" one. The AEBS would connect to the TC via Ethernet and configured as a bridge to allow the TC to continue to provide both NAT & DHCP services for the entire network.

Similar Messages

Setup a wired network between Time Capsule, Airport Extreme and Express

I currently have a Time Capsule, Airport Extreme N and an Airport Express N. They are currently connected wirelessly via the "extend network" mode. So I do have wireless connection throughout my home but I notice that it is slow especially compared to gigabit Ethernet. I now like to do the same but then connect the three devices over Ethernet as I have on each floor also Ethernet connections available that are connected via a wired switch.
How can I configure the three devices in such a way that they use the gigabit Ethernet wired connections as their "backbone" and then give wireless access to each floor as if it is one wireless network, and where I can connect other wired gigabit devices via the time capsule and airport extreme Ethernet ports?
I have one Internet connection that comes via Ethernet from my cable modem. This is now connected to my time capsule who creates the internal network and assigns internal IP addresses.
Can anybody advise how to configure each device? And to which ethernet port I should Airport Extreme?
Thanks
Alexander

Welcome to the discussion area, Alexander!
+How can I configure the three devices in such a way that they use the gigabit Ethernet wired connections as their "backbone" and then give wireless access to each floor as if it is one wireless network, and where I can connect other wired gigabit devices via the time capsule and airport extreme Ethernet ports?+
You will be setting up what is known as a "roaming" network using the etherent backbone for your network. This will produce the best possible bandwidth on your network for both ethernet and wireless connections.
_On the Time Capsule_
Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Remove the check mark next to "Allow this network to be extended" (This is only checked if you are extending your network using wireless only and you will be using ethernet to connect your devices, not wireless).
Update to save changes and the Time Capsule configuration is complete.
_On the AirPort Extreme_
Connect an ethernet cable from one of the LAN <-> ports on the Time Capsule to your ethernet switch. Then connect another ethernet connection from the switch to the WAN (circle icon) port on the AirPort Extreme.
Open AirPort Utility - Click Manual Setup
Click the Wireless tab below the row of icons
Wireless Mode = Create a wireless network (Not extend as you might think. Extend is only used if the Time Capsule and AirPort Express are connecting using wireless only)
Wireless Network Name = Exact same name as your AirPort Extreme wireless network
Radio Mode = Same setting as your AirPort Extreme
Channel = Automatic
Wireless Security = Exact same setting as your AirPort Extreme wireless network
Wireless Password = Same password as your AirPort Extreme wireless
Confirm Password
Click the Internet icon
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Update to save changes and configuration is complete
_On the AirPort Express_
You can connect an ethernet cable from the switch..or..from one of the LAN <-> ports on either the Time Capsule or AirPort Extreme, whichever is easier.
Set it up exactly the same as the AirPort Extreme above and update to save changes.
Power off the Time Capsule, AirPort Extreme and AirPort Express for a few moments. Then power up the Time Capsule first and let it run a moment, then power up the AirPort Extreme and then the AirPort Express.
If you have a laptop running Leopard or Snow Leopard, you can move your computer around and check to see which device it is connecting to for wireless. Hold down the option key while you click on the fan shaped AirPort icon at the top of the screen and look for the BSSID. That is the AirPort ID of the device to which you are connected at the time.
To get the AirPort ID of each of your Apple routers, open AirPort Utility and click on a device on the left. On the right, you'll see the AirPort ID for that device.
For ethernet connections, you can plug into an available port on the switch, the Time Capsule, or the AirPort Extreme.
You should be all set. Please post back on your progress.

Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

Time Capsule with (2) AirPort Express connection problem

I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

Can I extend the range of my Time Capsule with an Airport Express?

I have read on Apple's description of the Airport Express that it is possible to extend the range of an existing network. I have the OLDER version of the Time Capsule (it is still wireless-N but it can only broadcast EITHER 2.4 or 5 gHZ at a given time) that does not have the simultaneous broadcasting. Can I still use the Airport Express to extend the range of my Time Capsule network?

i think you have the same concern as mine....
would the express extend the n or g networks? i am pretty sure it cant dual broadcast.....
my guess is that it would extend the n network by default, but if an iphone hooks up to the part of the network that the express is covering, it will probably slow down to a g speed.
i am one of those that suffer from my existing airport extreme and express slowing down when i turn on my ipod touch or iphone! the whole network slows down to the lowest common denominator.
by getting the new time capsule (or the new airport extreme), i will be fine in the part of the house that is being served by the new machines, but i am expecting the network to slow down where the express is in incharge!
this is all in preparation to buy a new TC...... is my understanding correct?

HT1178 Can you backup to same time Capsule with PC and Mac

How do I backup to same Time Capsule with both PC and Mac

- backup iMac to TC and hook up HD to USB port on TC to backup PC laptop
Hmmm not better IMHO.. as long as you disk image the TC.. and the amount of space you have far exceeds total usage on both computers.. For the TM backup on the Mac you want TC area to be at least 3x the used space on the drive.. leaving out VM or bootcamp partitions if you use them.
Plus enough space to back up the PC laptop a couple of times over.
USB hard drive is fairly slow.. but should be ok for backup over wireless.. just be aware you cannot unplug the USB drive and use it direct unless you format it FAT32 which is very poor format. So first backup is going to be slow.
- backup iMac directly to HD thru firewire and backup PC to HD hooked up to Airport Extreme
If you don't already have a TC then this is fine. Firewire local disk is much faster than network backup even over gigabit.
Any of your options would work ok.. doing disk image on the TC is most difficult to get working and limits the hard disk space. Balance out what you already own network wise with what you need.. there are plenty of routers now with USB ports that will deal directly with windows using NTFS.. if you end up using firewire local disk to the imac..

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

Time Capsule with Rescue and Recovery v4

I am unable to backup my Thinkpad X300 on to Time Capsule using Rescue and Recovery v4. Other Windows XP applications can see the Time Capsule just fine.
I have added the Time Capsule to the Windows workgroup also, and use Rescue and Recovery on the XP machine to select the Time Capsule as the backup location. The Rescue and Recovery always fails at the beginning saying "The backup was cancelled".
Please help!!

ThinkVantage Rescue and Recovery v4.2 is available to enterprises at this moment only, you can buy it from IBM parts for $75 + state tax + shipping though.
I've come a long, long way," she said, "and I will go as far,
With the man who takes me from my horse, and leads me to a bar."
The man who took her off her steed, and stood her to a beer,
Were a bleary-eyed Surveyor and a DRUNKEN ENGINEER.
Present: T60 2007-55U, IBM 701c,
WorkStation: IBM IntelliStation A Pro.

Time Capsule with MacBook and PC

How can I use my Time Capsule with my Macbook Time Machine for auto backups and use it with my PCs as an external hard drive? I have I originally had it set up with my PCs originally. I have now erased the hard drive and hooked it up with my Mac (and am using Time Machine to back up my computer), but which partition setting do I use so I can use the other partition for windows operating system?

@ pondini:
given your last idea (namely to "connect a self-powered USB drive to the TC") would be the most appropriate:
Time machine on the mac would back-up to the TC, the Windows-based computer would back-up to the USB-drive. That self-powered USB-drive, in turn, is connected to the TC.
My questions:
That USB HD needs to be formatted in MS-DOS (FAT)?
Can the Mac still use space on the USB-drive for other data?
Is this just a matter of partitions?
Would all partitions on that USB-drive need to be MS-DOS (FAT)?
Thanx for answers!

Printer error using Time Capsule with Vista64 and HP printe. Any one else?

I'm running Time Capsule with my MacBook and Vista 64 PC, and trying to print on a HP5510 All-in-one.
The Time Capsule is set up according to the manual and I can print wirelessly from the MacBook. Also, the MacBook and the PC can both access the TC HD.
The problem comes when I'm trying to print with the PC. It will print about 3/4 of the page and stop, showing an error. At that point, I cannot purge/cancel/restart the print job. I need to shut down the PC and printer to get rid of the error.
Anyone else have this problem?
Thanks
Ray

Have you downloaded and installed the following updated Mountain Lion compatible driver and software for your model?:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-107723- 1&cc=us&dlc=en&lc=en&os=219&product=4073738&sw_lang=
Hope this helps

Best way to extend WiFi network with extreme and express using access contr

I just got my new AirPort Extreme and configured it to use 2,4 and 5 GHz. I also would like to use Access control. When I configure my AirPort Express to extend my network I see two strange things happen.
1. On both devices I have to configure access control. I figured this is an extension of the Extreme, the Express uses the same list
2. When I finished configuring I see the Extreme and Express flash heavily green and my wired network is becoming extreme slow. I think the two devices are talking to each other, but packets are dropping??
I tried a hard and soft reset of the both devices, no solution.
Does anyone recognize this problem and maybe you can tell me what the best way is to configure both devices.
Is there also a way to configure WEP instead of WPA for using my Nintendo DS.
The firmware I use is 7.5.2

I just got my new AirPort Extreme and configured it to use 2,4 and 5 GHz. I also would like to use Access control. When I configure my AirPort Express to extend my network I see two strange things happen.
1. On both devices I have to configure access control. I figured this is an extension of the Extreme, the Express uses the same list
2. When I finished configuring I see the Extreme and Express flash heavily green and my wired network is becoming extreme slow. I think the two devices are talking to each other, but packets are dropping??
I tried a hard and soft reset of the both devices, no solution.
Does anyone recognize this problem and maybe you can tell me what the best way is to configure both devices.
Is there also a way to configure WEP instead of WPA for using my Nintendo DS.
The firmware I use is 7.5.2

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

Creating network using Time Capsule, Airport Extreme and Airport Express

Hello,
Yesterday I purchased the 4th Gen Time Capsule to replace my Airport Extreme (4th gen) as my "main" router. However, I want to repurpose my Airport Extreme to extend the network AND use the Ethernet ports to connect additional devices. I will then use my Airport Express solely to "join the network" for Airplay purposes.
I connected the Time Capsule directly to my cable modem using Ethernet. I set up the Time capsule in Airport, checked the "allow this network to be extended" and used WPA2 Personal encryption. I then set up the Airport Extreme to "join an existing network" wirelessly and mimic the same network name, encryption type and password. Finally, I set up the aiport express as I mentioned above.
This setup does a great job of extending my network with increased performance. However, when I plug my Mac into the Airport Extreme using ethernet, it does not recognize. This Mac IS connected via Aiport. However, under the "ethernet" option in the Network Menu, it says "No IP Address Found."
I've searched some other forums and thought this configuration would work. Also, I apologize if this seems like and amateur post. This is my first time using the Apple support Community.
Thank you

I set up the Time capsule in Airport, checked the "allow this network to be extended" and used WPA2 Personal encryption
Those are the correct settings for the "main" router.
I then set up the Airport Extreme to "join an existing network" wirelessly and mimic the same network name, encryption type and password
The AirPort Extreme does not provide any additional wireless coverage and the Ethernet ports are not enabled if the device is configured to "join a wireless network"
Check your setttings using AirPort Utility - Manual Setup
Click the Wireless tab located just below the row of icons
Wireless Mode = Extend a wireless network
Wireless Network Name = Same name as the Time Capsule wireless network
Enter a check mark next to "Allow wireless clients"
Wireless Security = Same setting as the Time Capsule wireless network
Wireless Password = Same password at the Time Capsule wireless network
Confirm Password
Click Update at the lower right and allow 25-30 seconds for the AirPort Extreme to restart.
Configured correctly, the AirPort Extreme will extend the wireless network and the Ethernet ports on the Extreme will be enabled.
I good starting location for the extending device is a location about 1/2 to 2/3 the distance from the main router to the area that needs more wireless coverage.
Once you have the AirPort Extreme configured and working correctly, post back if you would like a tip to find out exactly which device....your Time Capsule or the AirPort Extreme that your laptop is connected to at any given location.

Setting up Time Capsule, Airport Extreme, and old AP Express...

Question regarding setting up a wireless network in the home.
I currently have the following Apple wireless networking products:
Time Capsule - Model A1254
Airport Extreme - Latest model
Airport Express - Model A1084 (older model unit)
I also have a Verizon router with wireless capabilities.
I am trying to provide wireless coverage throughout my entire home. The Verizon router is in the basement, and I have the wireless portion turned off.
I have ethernet running to my office on the first floor from the Verizon router in the basement as well as ethernet running to the second floor. In my office I put the Time Capsule, while the Airport Extreme is on the second floor.
Since both the Time Capsule and the Airport Extreme have ethernet providing their internet connection, I am curious to know what is the best way to set them up to provide wireless support to laptops.
Should they both be configured with the same SSID but with different channels? Should they be configured with different SSIDs? What settings will provide the most seamless (Apple-like) experience? What will provide the best bandwidth?
Lastly, should I set up the Airport Express with WDS? Should I ditch it altogether since it bottlenecks the performance of the WDS main router?
Any advice would be appreciated!
Thanks,
Ivan

+Should they both be configured with the same SSID but with different channels?+
Yes, if you want one "large" network. A laptop could "roam" around the house and automatically pick up the strongest signal.
No, if you want two separate wireless networks. In this case, you would need to switch networks depending on the location of your laptop in relation to the nearest router.
Make sure both the Time Capsule and AirPort Extreme are configured with their Connection Sharing setting to "Off (Bridge Mode)".
The ethernet backbone on your network will provide for the best possible bandwidth...much better than if you try to extend using wireless only.
+should I set up the Airport Express with WDS?+
Ideally, you would set the AirPort Express up the same as the Time Capsule and AirPort Extreme...using ethernet to the AirPort Express. WDS will kill your bandwidth on the wireless network, cutting it in half. If you can't connect the AirPort Express using ethernet, you will probably be much better off simply not using it.

Time capsule airport extreme and airport express set up question

I have all three
Can I use the 3rd generation airport extreme then setup roaming network by connecting using Ethernet to a 4th generation time capsule and then use the airport extreme to extend the 2.4ghz network wirelessly or do I have to use the time capsule as primary?
What should the settings be to get then talking correctly?
My issue is I get weak 2.4ghz reception in the back of my apartment, my 5ghz speeds are great.

To connect your Mac to the modem you may need to reset your modem to convince it to connect to a "new" device. Depending on the model of modem, that can be as easy as removing power for a few moments. If that doesn't work, remove power and wait 15 minutes. Further reset steps can involve pressing a "reset" button or removing a battery if the modem has one. In the worst case, your ISP may need to edit its settings to update to the MAC address of the new router. If they won't or can't do that, powering down the modem for 16 to 36 hours can reset the connection.

Time Capsule with Extreme and 3 Express

Similar Messages

Maybe you are looking for