Time capsule with no airport card on a macpro

Hi there, i have being unsuccessful trying to access to the internet via a TCapsule device with no modem on the WAN port, this modem is on other room computer in my office and there is no possibility to change location, the mac pro came w/o the airport card and i supposed that with the TC will not be necessary ....is this correct or do i have to install the AP card, ...on the other hand trying to configure the TC i see in fact the wireless access point and input the password but my machine just cant access the internet...

I don't think you're understanding what a TC does...
How are you seeing other wireless networks? Using what? The Mac Pro? I thought it doesn't have a wireless card in it? Or are you saying the TC sees other wireless networks? Or are you talking about some other machine you have that has Wifi?
The TC can run in 2 different modes -
1) It can act as a router/Access point. You plug your modem into it's WAN port, plug your computers into it and they all get network access THROUGH the TC out to the modem.
2) It can act to bridge/extend an existing wireless network. ie, if there's another wireless network that is open/unencrypted, or that you know the key information for, you can have your TC talk to the other Access point and the TC can extend the access point to your location, allowing your Mac to talk out through the TC to that other AP and then out to the net though whatever connection that other AP has to the internet.
In reality, if you bought the TC to do #2, you spent a WHOLE lot of $$$ for no reason... plus you're at the mercy of somebody else's network.. The reason you're seeing those other networks, but not getting any internet off them is because you're probably not able to log into their secured WIFI networks...
Just move the TC into the other room and, hook the modem to it's WAN port, hook all the computers to the other ports on it, and you're good to go. What you're trying to do is very screwy and not really a good idea in general.

Similar Messages

  • Can I link up one time capsule with two airport express, Can I link up one time capsule with two airport express

    Hi, I would like to know whether I can link up one time capsule with two airport express. The result why is that I would like to put one time capsule at first floor, two airport express at 2nd floor and 3rd floor. All these three share one network. Please advise. Thanks.

    There are several ways to conenct them. We need to know what it is you want to accomplish first. Do you want better Wi-Fi coverage on the second and third floors or do you want to stream music to the xpresses?

  • Time Capsule with (2) AirPort Express connection problem

    I have (1) Airport Time Capsule with (1) AirPort Express connected. I'm trying to connect another Airport Express but only get a yellow light on the 2nd Express. If I connect it with a ethernet cable I get a green light. How do I connect a 2nd Express?

    The 2nd Express needs to be about the same distance from the Time Capsule as the 1st Express....and....it cannot be closer to the 2nd Express than it is to the Time Capsule.
    The reason for this is that the Express will pick up the strongest signal and you want the Express to pick up the Time Capsule signal to be able to extend it.
    Then, start over as LaPastenague instructs on the 2nd Express and configure it again.

  • Time capsule with older Airport

    I just got Time Capsule wireless network up and running, and my newer ibook 2 GHz Intel Core 2 Duo with Leopard connects just fine to the network, which I established using that ibook.
    But, I also have an older ibook G3 with wireless Airport card, and would like it to connect as well for use around the house. If finds the networks but says "The password you entered is not correct for the selected Airport network." I am certain the password is the same and correct.
    Will this older ibook and Airport card connect to Time Capsule or are the frequencies somehow incompatible?
    Thanks.

    ...my newer ibook 2 GHz Intel Core 2 Duo...
    That is a MacBook or MacBook Pro... not an iBook.
    What type of wireless encryption are you using? An iBook G3 can NOT connect to a WPA2 protected network.
    The iBook G3 can connect to a WPA protected network IF the iBook is running 10.3 or beyond.
    The iBook G3 can not connect if your Time Capsule is configured to use 802.11n only.
    BTW, the Multicast rate has absolutely nothing to do with it. This is the minimum rate at which the base station should drop the wireless connection.

  • Setting up Time Capsule with existing AirPort Extreme 802.11n and AirPort Express.

    I already have and am using an AirPort Extreme 802.11n with an AirPort Express. I want to set up a Time Capsule 802.11n. Which is the best way to configure this?

    ... Which is the best way to configure this?
    The answer depends on what you need the TC to accomplish. If all you need it to do is perform Time Machine backups, simply have it join your existing network in client mode. It would be if it were to connect to your existing router (presumably your Extreme), not through an "extended" wireless network (presumably your Express).
    If you need the TC to "extend" your network so as to serve additional wireless clients, you can do that also. Configure it to "extend" the network created by your Extreme.
    As you can see it's quite versatile.

  • Just got a time capsule with my airport base station.

    I am trying to use it as a backup but keep getting an error message, i have other backups using time machine on my imac, but on different hard disks that are all dis-mounted. I want to use the Time-capsule as my main backup for our different mac's. not sure what to do?

    Is the TC available as a TM target?
    You sometimes need to reset the TM to allow a new network destination to be chosen.. but it will usually work with multiple destinations .. you just need to select where you want the backup.
    Is the TC plugged into the airport extreme by ethernet? If not, I would certainly do that.
    Reset it and run the airport utility 5.6 from Lion to do the setup.. v6 in lion does make a mess of this often enough we recommend don't use it.
    Apple made a version of the utility from previous versions available to Lion since v6 was featureless.
    http://support.apple.com/kb/DL1482
    Ignore what it says .. just load it into the computer and use that instead.

  • Time Capsule with existing Airport Extreme--Help

    I just bought a new 20 inch iMac with a Time Capsule for home. I have an existing Airport Extreme and there are a number of peripherals (2 iBooks, Playstation 3) which feed off of this airport. What I want to do is make the Time Capsule accessible only to my new iMac and keep the other network intact. I disconnected my DSL from my Extreme and connected it to the Time Capsule. It works fine. My thought was then to run an ethernet line from the back of the TC to the Extreme. I did this, got a green reception signal on the ethernet from the TC, but am unable to make the Extreme work as it did before. I know I'm doing something wrong--possibly the config on the Extreme--but I'm clueless as to making this work. Any help would be appreciated.
    Thanks

    Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

  • Can I extend the range of my Time Capsule with an Airport Express?

    I have read on Apple's description of the Airport Express that it is possible to extend the range of an existing network. I have the OLDER version of the Time Capsule (it is still wireless-N but it can only broadcast EITHER 2.4 or 5 gHZ at a given time) that does not have the simultaneous broadcasting. Can I still use the Airport Express to extend the range of my Time Capsule network?

    i think you have the same concern as mine....
    would the express extend the n or g networks? i am pretty sure it cant dual broadcast.....
    my guess is that it would extend the n network by default, but if an iphone hooks up to the part of the network that the express is covering, it will probably slow down to a g speed.
    i am one of those that suffer from my existing airport extreme and express slowing down when i turn on my ipod touch or iphone! the whole network slows down to the lowest common denominator.
    by getting the new time capsule (or the new airport extreme), i will be fine in the part of the house that is being served by the new machines, but i am expecting the network to slow down where the express is in incharge!
    this is all in preparation to buy a new TC...... is my understanding correct?

  • Time capsule with a airport extreme n router

    Question I already have a Airport Extreme N Router and it works very well. But now I would like to have the Time Capsule and some how I don't know, have both hooked up maybe the older extreme N router as a extender? Can any one tell me how I can do this or if it can even be done.

    Do exactly what you describe but place the secondary router in bridge mode then configure its wireless.

  • Using Time Capsule With Existing Airport Network

    Hi All,
    I already have an Airport connection and would like to setup TimeCapsule on that network. Do I need to plug in an ethernet cable? Will it conflict with my existing airport base station?
    Thanks in advance,
    Tim

    Hi All,
    I went through the setup on the Airport Utility but honestly I'm very confused as to how to set this up. It's being recognized by the Aiport utility but when I got to configure it, the airport utility says "Please make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again. (-6753)" I've connected it to my Ethernet port even though I thought I shouldn't have to and it still gives me this message. Thoughts?
    Thanks in advance!!
    Tim

  • Time Capsule with an Airport Extreme bridge resulted in slow LAN speeds

    Wondering if other people are seeing this. I am unsure if this was a result of upgrading both my TC and AEx to 7.6, but my LAN speeds had suffered in this configuration.
    1.  Comcast cable modem connected to the WAN port on my TC.
    2.  Connected an ethernet cat6 cable from the TC to my Airport Extreme, which was configured as a bridge.
    3.  My desktop was connected to the Airport Extreme.
    4.  When doing file transfers within the LAN or general internet usuage, my network speeds were extremely low.
    5.  Disconnected the cat6 cable from the TC and plugged that directly to my desktop.
    6.  Network speed jumps up by a factor of 5. LAN file transfers and internet usuage has returned to what I had expected.
    Is there a known issue where a bridged AEx conncted to another Airport "main" device will result in all machines connected via the AEx to have slow LAN speeds?
    I didn't see this issue months ago. I did less than 2 months ago upgrade our machines to the 7.6 firmware, but after experiencing some hiccups on the network, reverted back to 7.5.2.  However, the slow LAN speeds haven't gone away when the two airport machines are connected to each other.
    Any insight or advise is appreciated.

    By now, millions of users have updated to 7.6 and I cannot recall seeing a post similar to yours on this forum.
    As far as a "known issue", you would need to contact Apple regarding that.
    Suggest that you have the AirPort checked out at an Apple store if you have one near you.

  • HT6065 when i click on time machine to set up my new macbook pro retina 10.9.1 mavericks osx 2013 it says: Other time capsule (with the airport utility icon)under it says set up time capsule not listed.which2do? also the HD should i use as my initial back

    If my mac has 4gb and my email has 15gb where does the 15gb on mail go? HD? and my HD has 120GB then why i only have 4 accessible2 me?

    my headline is also a Q if anyone noticed... thank u!

  • Extending a time capsule with airport express twice

    Hi,
    I have been trying to extend my existing wireless network recently but it never ended up how I wished...
    I have one 4th generation Time Capsule (A1409) and two Airport Express 802.11n (1st generation A1264).
    All currently have MAC Address base authentication and no security in place for was of testing (security not relevant at this point in time).
    When I extend my Time Capsule with either Airport Express this works like a charm, the LEDs are all green and connection works for client devices.
    When I extend my Time Capsule with both Airport Express the same applies, everything works.
    However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express. While all LEDs are green and the second Airport is seen in the Airport Utility, I find no client are ever able to connect to it and alway either connect to the first Airport Express or to the Time Capsule. This is an issue I the area I want to cover is pretty big and I need the second Airport Express for the additional reach.
    I haven't found anything against this setup, it however appears you can't connect to the second Airport. The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
    However no connection seam possible to Airport Express two.
    I have swapped Airport Express one and two, and in this case Airport Express gets the clients and Airport Express one now extending Airport Express two gets none.
    Is this an expected behavior, i.e. should I give up or is there anything I can do about this ?

    However what I have found not to works it extending my Time Capsule with one Airport Express and then extending this Airport Express with the second Airport Express.
    Apple's "extend a wireless network" feature will only allow you to extend the signal one level, not two. It's possible to have more than one device extending the signal, but each extender must connect directly to the main base station.....not to another device that is already extending the signal.
    The Airport Utility would even accurately depict the situation with Airport Express one dotted line to Time Capsule, and Airport Express two dotted line to Airport Express one.
    This is an illusion. AirPort Express is "joining" the wireless network.....not extending it. When the Express "joins" a network, it can be used for AirPlay, or a remote printer could be connected to the USB port, but the Express will not provide any additional wireless signal coverage when it joins a network.
    Is this an expected behavior
    Yes. I can try to look up Apple's support document that explains this if you want more information, but you may likely already have all the information that you need. Let us know.

  • Time capsule with airport extreme

    Good afternoon,
    I'm trying to figure out how to configure my time capsule with my airport extreme and with all the rest as described below (see: "toys"). But the information I've gathered is somewhat dubious.
    So I'm hoping someone can help me out.
    My "toys" are: TimeCapsule, AirportExtreme, iMac, iPhone 4s, iPad, AppleTV, 2 laptops, a kidstablet and a PSVita.
    And naturally this was/is all wireless and that seems to be a bit of a problem because if everyone is using the wifi-signal it says bye-bye.
    The configuration I have in mind is:
    modem --- wired --- timecapsule (wan???) --- wired ??? --- AirPort Extreme --- wired (???) --- iMac
    and then everything else wireless
    Is this a good configuration? Can I do better?
    And do I have to change some of my settings in the process?
    Already a big thanks in advance !!!

    do I put the wire in to the WAN port of the timecapsule
    Yes
    and from the TC to the APExtreme LAN to LAN
    Recommend LAN on the TC to WAN on the AirPort Extreme for consistency, although it does not really matter in this case.
    and from APExtreme LAN to iMac?
    Yes
    The settings are latin for me so I haven't touched any of the settings
    If you power off and disconnect the AirPort Extreme, is the TC wired to your modem now?
    If yes, do things appear to be working OK with the Time Capsule and modem?

  • How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    How does one sync the new time capsule with the old airport extreme and airport express in order to extend range?

    Thanks for the additional information.
    Unfortunately, the AirPort Utility application in the Lion and Mountain Lion operating systems, which is used to configure the new Time Capsule does not support the older versions of the products that you have.
    Even if it did, there are no settings on the older AirPorts to "Extend a wireless network", so they are not compatible with the new Time Capsule if you intend to extend the network only using wireless connections.
    If you have the ability to connect each AirPort to the Time Capsule using a permanent wired Ethernet cable connection, it might be possible to use a complicated workaround to install an older version of AirPort Utility to configure the older AirPorts to work with the new Time Capsule.
    If you have another Mac there that is using the Leopard or Snow Leoapard operating system, things would likely be simpler. I have not done this type of procedure to mix a new Time Capsule with older AirPorts, so I would not be able to say whether this would work or not.

Maybe you are looking for

  • ALV report for 5 Grids using Objects and Method

    I have few questions in ALV 5Grids ,could you please correct me in the following program logic... Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it

  • How to share dependant jars across rars & ears / avoid classcast exceptions

    <b>How can one share dependant jars between a ear application and a resource adapter and avoid getting a ClassCastException? </b> <P> In some appservers(such as Oracle) the resource adapter is the parent of your ear classloader, so a single instance

  • Problem in at selection screen

    hai friends, i have two radio buttons in my selection-screen . one is for application server file and another is for local file.when i select the local file radio button one excel file should get genarated and when i click on appln sever button then

  • Acrobat XI my default viewer when I open a PDF?

    How/where do I change the settings to have Acrobat XI Pro my default viewer when I open a PDF?  I tried the change noted for Acrobat X Pro but it didn't work for XI.  I tried going through the settings screen but don't see a place to make the change

  • Disadvantages of Using BDC over BAPI

    Hello , could you please clear my confusion as why BDC are not supposed to be used for data uploading over bapis. What are the advantages and disadvantages between BDC and BAPI thanks in Advance PAvan