Time capsule won't let me access latest back up

I had to replace my hard drive and when I tried restoring from time capsule it only brought back files from summer 2011. But when I enter time machine it shows that there was a full back-up done just this past December 2012. How can I get everything back from 2012??? Plead help. I really just want my photos back.

Read the stuff on restoring particular folders.
http://pondini.org/TM/15.html
Read all the stuff from Q14-17
People should do a disk image before the upgrade.. not use TM. It is 1000 times easier to restore from a full disk image.

Similar Messages

My Time Capsule won't allow my computer to back up. It says it is already in use but that is what it is being used for.

My Time Capsule won't allow my computer to back up. It says it is already in use but that is what it is being used for. It has been working fine for years. All of a sudden I keep getting a message that TC (time capsule) cannot complete back up as it is already in use. I am doing the backups automatically through Time Capsule.

Restart the Time Capsule by disconnecting and reconnecting the power adapter. When it's back online, open the AirPort Utility application and check to see whether there's a firmware update for it.

My Time Capsule won't let me copy files to it any more

I've got 2 Time Capsules, one 2TB a couple of years old. I use it to back up a MacBook Pro and iMac via Time Machine, plus store a large number of files. Until recently it's worked absolutely fine - haven't even had the usual "horribly slowMacine since upgrading to Mountain Lion" problem. But now I can't back up with Time Machine at all. Till today it's gone through the motions, but after appearing to copy a couple of megs (of about 15GB) it stops with no apparent error message.
Today I've noticed it's also begun to behave oddly if I try to copy any files to it. I wondered if it had somehow become read only, but it allows me to create folders, rename files etc. But if I try to copy any files to an existing folder, I get the informative "The operation can't be completed because an unexpected error occurred (error code -50) The disk isn't full - over 300GB free (or reported as free by Airport)
Incidentally I have another, newer Time Capsule which I was keeping as a duplicate device for photos / music / documents etc (rather than letting the sparsebundle file gobble up the space as it's done on the 2TB device) I started to create a new backup on that (over ethernet) but have lost patience after about 6 hours watching it get slower and slower. Current projection would be the initial 200GB backup will take around a week. But that's another story.
So can anyone suggest how I can resolve the error code -50 problem and get back to a functioning Time Capsule please
Thanks

Not really any definite source of endless set of streams of (very helpful) consciousness.
I do not like 7.6.3 as it has a lot of issues.. but see how it goes for you.
If you want fast backup.. connect by ethernet and turn off wireless. Difficult to really suggest much else for now.
I am definitely of the opinion that Apple needs to get a few programmers off iOS and onto Mac OS and particularly networking and firmware on their routers.. which has shown less than stellar reliability in later versions.
I think using SMB compliant names helps.. for everything.
That is short, no spaces and pure alphanumeric.
If you need to isolate the TC from the network and do backups that way. You might need to turn off wireless in the computers until you finish the first round backup.
Erase done (very quickly)
That is not a low level format. That is merely wiping the allocation tables.
I do strongly recommend a one pass erase.
In the version 5 utility it is zero out data. But it is a single low level format.
And keep your eye on the SMART.. although the TC should throw up disk error if it goes off.

Time Capsule won't back up, privilege message error HELP!

Time Capsule used to work, now it doesn't.
1) I go to System Preferences > Time Machine
2) I click on Change Disk...
3) Window drops down and I select my Time Capsule, then click on Use for Backup
4) Window pops up saying "Enter your user name and password so Time Machine can access the file server "name of my Time Capsule". No field for user name, just Password - so I enter this and click on Connect.
5) Drop down window appears saying: "The specified user does not have read, write and append privileges on this network volume. Please connect as a different user or contact your network administrator."
Thing is - I am the admin.
Can't figure out how to rectify this. Have already tried restoring factory settings to Time Capsule but run into same problem.
Any ideas?

Exact same problem. In addition, Time Capsule won't let me create new folders in the root (/data) folder anymore, although I can still read and write files in already existing folders.
I thought it was because I upgraded to Snow Leopard, so I did a clean install of Leopard OS on my Mac Pro with erasing the HDD, but still no luck.

HT3728 My Time Capsule won't allow me to access my home network each day (intermittently) between about 1000-1800. My modem is working properly, and I can get on-line by hooking my computer straight to my modem, so I know it's the Time Capsule at fault. I

My Time Capsule won't allow me to access my home wireless network for several hours each day -- usually between 1000-1830 or so. My modem is working correctly and I can still get on-line by going straight from my computer (MacBook Pro) to the Ethernet port. It must be the Time Capsule -- any ideas?

Any ideas?
Wireless Interference
Might be caused by a cordless phone in the vicinity. To give you an example, my neighbor.....across the street...used to be able to literally crash my wireless network if he was in his front yard talking on his cordless phone.
I discovered this by accident one day after spending weeks trying figure out why my network would crash at random times.
Other possibilities include a wireless security/camera system near you
Still other things might be an amateur ham radio operator....which should not interfere....but again from experience, I know that this can occur.
Yet another possibility is another wireless network near you that is being turned on and off at random times. Some users power up their modem/router only when they want to do so and leave it off otherwise.
Some general rules to help avoid interference:
Move any cordless phones that you might have as far away as possible from the Time Capsule and/or your computer(s)
Avoid placing other electronic devices....computer, television, amplifier, satellite receiver, etc. near the Time Capsule and/or your computer(s)
Avoid metal surfaces near the Time Capsule and/or your computers
Elevate the Time Capsule as much as possible. Think of it as a water sprinkler....you want to get the room as wet as possible
Experiment with different wireless channels on the Time Capsule. To do this:
Open AirPort Utility
Click on the Time Capsule
Click Edit
Click the Wireless tab
Click Wireless Options
Start with Channel 11 on the 2.4 GHz band and work your way down
It is unlikely that you are picking up interference on the 5 GHz band since there are.....for now at least.....far fewer networks using this frequency.

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
Is it tall like this.
Then it is Gen5.
otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
Open the Airport utility and give us a screenshot of the summary page.
That will also help us determine that you have the TC, which version and how it is setup.
You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
You do not do anything in the TC.. set it up in the Ubee router.
Port forward 548 to the TC in the Ubee router.
And make sure the TC has a static IP in the Ubee router.
Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
You are fighting hard because Apple made this hard.. not easy.

New MBP and Time Machine won't let me search out my NAS to save too. Any ideas?

When trying to set up time machine and using a NAS drive in my wireless network Time Machine won't let me search and select the storage device. I can access the storage and save/retrieve files so I can see and use it. Anyone got any ideas please?
Brand New MBP running Mavericks.

I'm having the same issue with Mavericks - and it appears to be Mavericks specific. I don't have this problem with Mountain Lion. Mountain Lion can see both of my NAS drives.
Additionally, with Mavericks Time Machine won't see your backup properly. It may only see the most recent backup. Though in my case it wouldn't load either one (I had two on different drives). To recover some files I had to use a machine running Mountain Lion to mount a backup file then I was able to extract the files to a USB drive, which I then moved to the Mavericks machine.
I've tried using terminal to run tmutil commands without luck. I have mounted the volume I want to use - it shows when I do "ls -l /Volumes". Then when I do sudo tmutil setdestination /Volumes/VOLUMENAME the system seems to go into an infinite loop. I have to ^c to get back to terminal.
Clearly with Time Machine on Mavericke Apple has really screwed the pooch.
MacBook Pro 2.3GHz i7 with DVD drive and standard resolution display.

Time Capsule won't mount after upgrade to iTunes 9

See my full post in the Time Capsule support section ("Help! Time Capsule won't mount after installing iTunes 9"). My music library is on my Time Capsule, but after installing iTunes 9, it won't mount on my iMac G5. I can use the internet, but the disk won't mount. My Powerbook hasn't been updated yet and the Time Capsule mounts fine.

To make it easier, here's the post:
"My music library is on my 500 Gb Time Capsule. I just installed iTunes 9 on my iMac. It updated my library and synced my iPhone. Now, the TC won't mount. I still have internet connectivity, but I can't access my media or print to my printer connected to the TC. I can use the computer and everything, but if I hover my mouse over the TC disks menu bar icon, I get the spinning beach ball there. If I try to connect using my Network icon in the sidebar, it allows me to log in and get to the screen to select the volume I want to mount, then stops responding. In the Activity Monitor, AFP Client & AirPort Base Station Agent are not responding. I also have a Powerbook G4 w/Leopard (10.5.8) which hasn't been updated to iTunes 9 yet. The Time Capsule mounted fine on it."

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

Thanks for your response
Let me give the history - I started with an Apple Express being fed thru a D-Link EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
Got up and running easily with Comcast help and with the modem connected directly to a computer.
Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
I have gone thru all of the combinations of powering down/ up, but all stays the same.
I can live with what I have but something still doesn’t seem right.
Thanks again

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

I accidentally updated iPhoto on my (now) external hard drive and now it won't let me access any of my photos. What can I do?

I accidentally updated iPhoto on my (now) external hard drive and now it won't let me access any of my photos. What can I do?

So, you have two versions of iphoto? One from the old machine and one from the new?
If so, forget about opening with the older version of iPhoto.
For the newer version:
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it

Hello everybody,i've forgot my apple password and i wanted to reset it to a new one but i also forgot the security question and the alternative email does not work and i am really need to log in to my apple i d because my iPhone 4g won't let me access it so anyone can help me with it or can i put another apple id to it without putting the first password?THANKS FOR YOUR HELP.

Then call AppleCare and talk to someone in account security.

Hi, I have a macbook pro with a new hard drive installed. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files'

hi, I have a macbook pro with a new hard drive installed and restored. My WD external drive backup on time machine now wont let me access the files. I get a prompt saying 'you do not have permission to access the files' After my new drive was installed I plugged in time machine and it started backing up. I paused it when I realised that it was running for more than a few minutes. I now realise that it probably started backing up the new hard drive all over again. Which makes me think that the original back up must be on the WD back I cant seem to access it. Any ideas would be helpful.

See E-10 in the first link.
Time Machine Troubleshooting
Time Machine Troubleshooting Problems

After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

After putting my iPad onto airplane mode it won't let me access apps without connecting to iTunes but it won't let me connect to iTunes how can I resolve this?

Try "Pacifist"!
Pacifist is an application for Mac OS X that opens up .pkg installer packages, .dmg disk images, .zip, .tar, .tar.gz, .tar.bz2, .pax, and .xar archives, and more, and lets you install individual files out of them. This is useful if you need to install just one file out of a package instead of the entire package

Having trouble with time capsule, won't find backups

having trouble with time capsule, won't find backups

Usually a simple reboot will work.. Reboot the TC..
If that is not enough.. Restart the whole network from off.
Mountain Lion and to a lesser extent Lion.. have network issues and lose track of the TC.

Time capsule won't let me access latest back up

Similar Messages

Maybe you are looking for