Time Capsule Wont back up with Yosemite

I have a mac mini (late 2012) and a Time Capsule 802.11n (3rd Gen) before i upgraded to Yosemite everything work as it should. Now overtime it attempts to back up it fails and looses connection to the time capsule. i then have to turn of my wifi and then turn it back on (mac mini setting) in order to reconnect. I have had to turn of the auto back up because it will keep disconnecting my mini every hour.

Welcome to Yosemite.. bug heaven.. worst release yet on the network side at least.
Have a quick glance through the discussions.. yosemite is top of the lists.. and exactly what you experience.
Normal solution.. Reset the TC to factory and start again. Use all short names, no spaces and pure alphanumeric.
Clean out all the old wireless names in the computer. Then rediscover the new TC wireless name.
Use WPA2 Personal only with 8-20 character pure alphanumeric mixed case and numbers password.
Make sure your network is set to Link-Local only for IPv6. And using ethernet is always hugely better.
Post back if you keep having the problem.. do not be surprised if you do.. but these things are essential start.
I need full network info to give further advice.

Similar Messages

Time capsule wont back up

I have tried lots of different things buy my time machine back ups keep failing i have completely reset it even erased all data so its empty but it still fails to back up.

Welcome to the discussion area, phil gill!
Suggest that you install Time Machine Buddy and when you have a backup problem, post the error message that you are receiving.
We only know as much about your problem as you can tell us, so detailed info on what you do and what happens when you do it will be very useful in trying to provide help for you.
In the meantime, please look over the excellent Using Time Machine with a Time Capsule guide posted by Time Capsule expert Pondini on the Time Capsule main forum page.

Time Capsule remote access disabled with Yosemite?

Hi and tnxs for reading.
After Yosemite installation I am noticing I cannot access my Time Capsule on the internet from the finder anymore.
I see it, but if I click on it I cannot see the content of the HD as it was possible before.
Any advice please?
Tnxs.

So it is still working locally??
The BTMM and iCloud password are correctly set in the TC??
Do you get a public IP via the BTMM which you can use manually in Finder..
Go, Connect to Server.
AFP://PublicIPaddress
Tell us the setup.. even if it was working before you changed to Yosemite it can be tricky if the TC was not actually working as primary router in the network as it really needs to be.

Can I connect old Time Capsule to new iMac with Ethernet?

I recently purchased a new iMac, and I am trying to use a 2008 Time Capsule for back-up. I successfully used the Time Capsule for back-up with a MacBook for the last four years, but the iMac's Time Machine won't recognize the Time Capsule as a back-up device. I have the two devices directly connected with an Ethernet cable, and no longer use the Time Capsule for MacBook back-up. I have rebooted the iMac and Time Capsule multiple times, but the Time Capsule light still flashes amber. Help?

Press and hold the reset for 10sec.
Make sure the ethernet is set to auto and does actually get an IP address from the TC.
Turn off all other network connections.
Download and install 5.6 airport utility if you are still on Lion.. it will give you far more useful info and actual tools not toys like the Lion version.
http://support.apple.com/kb/DL1482

I have used Airport Time Capsule with my iMac for several years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both?

I have used Airport Time Capsule with my iMac for a couple years. I recently purchased a MacBook Air and when it tried to backup to Time Capsule it couldn't because Time Capsule is full. How can I now use the 3TB Airport Time Capsule to back up both the iMac and MacBook Air? I don't mind losing earlier backups. I have excluded some items from backing up, but since the Airport Time Capsule is full, I can't even begin to back up the MacBook Air.

On your Mac.......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click on the Disks tab at the top of the window
Click Erase Disk
On the next window that appears, select the Quick Erase option, then click Erase
The operation will only take a few minutes.
Now you are ready to start new backups of both Macs. Back up one Mac first, then back up the other. Do not try to back up both Macs as the same time.

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

I recently purchased a brand new Airport Time Capsule 2TB. I already am using the previous generation time capsule to back up all my computers data. May I ask how can I complement the usage with my new time capsule?

By default your new Time Capsule will broadcast an unsecured wireless network with a network name of something like: Apple Network NNNNNN
Most likely your iMacs will be connected to the wireless network created by the Virgin Media router. However, both should see the Apple Network under the AirPort icon's drop-down menu as another wireless network that they can connect to. Is this not the case?

Can i use time capsule for back up my movies and watching them with my bravia tv

can i use time capsule for back up my movies and watching them with my bravia tv.
i mean can i use this for external hard disk drive to back up my movies and watching them with tv that has a lan port or wi-fi technology.

Only if the TV is a media player.. the TC is dumb as a board router with a hard disk.. there is no DLNA which I suspect the TV requires.. you can get a player like the WDLive and it will play movie files from the TC to the TV.. remember the TC is nothing but a file store.. no servers .. no nothing.

How do I use my Time Capsule to back up my wife's MacBook Pro running 10.4.

I just installed a Time Capsule. I've extended the range with two Airport Expresses. I've connected my MacBook running 10.6.3 to the wireless network. I've connected my wife's MacBook Pro running 10.4.11 to it. I've connected my wife's 3G iPhone to it and my first gen iPhone to it and our Apple TV to it. All devices can connect to the internet. I've connected the Time Capsule to the printer and printed wirelessly from both computers.
I've backed up my MacBook and seen that the Time Machine is backing up my MacBook as it should.
How do use the Time Capsule to back up my wife's MacBook Pro running 10.4.11? I've tried connecting them via ethernet cable and via USB cable. In both cases the Time Capsule failed to show up as an external drive and wasn't seen by the 10.4.11 back up utility.
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)

James Elliott1 wrote:
How do people do this? (Other than convincing their wives to let them upgrade their MacBook Pro to 10.6.3?)
That really is your best option. Sooner or later, you're going to have a problem with the "other" data on your Time Capsule, since the backups of your Mac will, eventually, fill up all the available empty space. That will, of course, limit the space available for the other backups.
There's a very cumbersome workaround in the blue box of #Q3 of the Using TIME MACHINE with a TIME CAPSULE *User Tip,* also at the top of this forum.
Another is to connect a USB drive to the Time Capsule, partition it if desired, and back up one Mac to it and the other to the TC's internal drive.

How do i use my time capsule to back up another mac?

How do I set up my time capsule to back up another mac computer?

If you have one Mac backing up already.. you can just use another.. TM is perfectly happy working with several computer on the same TC.. it will create a sparsebundle for its files.. it is a sort of virtual disk.
There is nothing you need do except make sure there is enough space.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

My Time Capsule has stopped backing up. I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

My Time Capsule has stopped backing up.
I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
"The backup was not performed because an error occurred while copying files to the backup disk."
I have gone into Mac Help and followed this down to stage 4:
under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily. Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ? How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD. It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go. What is my computer's name?
Please someone help! I'm completely stumped.
Thanks,
Maggie
Mac Help says:
If you back up to a Time Capsule or network disk:
Open the Time Machine pane of System Preferences, and slide the switch to Off.
Open Time Machine preferences
Open Disk Utility, which is in the Utilities folder in the Applications folder.
Open Disk Utility
Make sure the Time Capsule or network disk is turned on and available.
Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password.
On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes.
Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

Hello,
Thanks to the great Pondini...
http://pondini.org/TM/C3.html

I have just got an Airport time Capsule for back up how do I do it? Do I put the ethernet cable into the back of my sky hub because when I do that the amber light on my Time Capsule flashes amber. Please talk in simple terms as I am a

I have just got an Apple Airport time capsule to back up my one year old iMac......how do I do it? I have tried putting an ethernet cable into the time capsule and to my sky hub, all I get is a flashing amber light, can anyone help I am a silver surfer not used to Apple products, but love them, plus I don't understand half of the jargon....HELP please

Apple's Setup Guide for the Time Capsule is pretty simple and clear for most users, and you don't indicate at what point or step that you are getting stuck.
So, please go to page 8 in your Setup Guide to review the topic of Plugging In Your AirPort Time Capsule.
The Sky hub will likely have 4 Ethernet <--> ports on the back of the device. Pick any one that you want and connect one end of the Ethernet cable to the port that you choose.
Then, connect the other end of the Ethernet cable to the WAN (circle of dots) port as shown in the Setup Guide.
Continuing with the instructions on page 8 of the Setup Guide, power up the Time Capsule by connecting the power cord from the back of the Time Capsule to a wall AC jack.
Note that the instructions indicate that the indicator light will be solid amber during startup, and it will change to blinking amber during the setup. The light will remain blinking amber until you have configured the Time Capsule at which time the light will turn green.
Next, go to page 12 of the Setup Guide to see the information to Use your Mac or iOS device to set up your AirPort Time Capsule.
You indicated in your tag line that you were using OS X Mountain Lion (10.8.3), and since that will exceed the minimum requirement of a Mac using OS X (10.7.5) as noted in the guide, you can use your Mac to set up the Time Capsule.
Continuing with the instructions on page 12 of the Setup Guide......
1. Open AirPort Utility on your Mac. It is located as follows: Finder (the smiley face on the dock) > Applications > Utilities > AirPort Utility
2. Select your AirPort Time Capsule and click Continue. You won't be able to do this, but read further......If you do not see the AirPort Time Capsule that you want to configure, choose it from the WiFi status menu in the menu bar, at the top of the screen.
So, clicking on the WiFi icon will yield a small window that looks like this:
The example below shows an AirPort Extreme. You will see Time Capsule on your screen. Click on Time Capsule.
When you click on Time Capsule, that will get the setup wizard going. it will take a minute to analyze the network, then display a screen that looks similar to the illustration below, except that you will see a picture of a Time Capsule on your screen
3. Continuing with the Setup Guide.......Follow the onscreen prompts to create a new network
Network Name...........Type in a simple name that you want to call your network. Do not use the suggested name.
Base Station Name....Type in a simple name that you want to call the Time Capsule. Mine is TC, for example.
Password...................Type in a password that will be used for both the network and the Time Capsule. Write that down.
Verify..........................Type in the password again to Verify
Click Next
The setup wizard will configure everything for you. When you see the message of Setup Complete, click Done.
The Time Capsule is now set up and it will display a green light.

How to set up 2 time capsules to back up one computer?

what can i say, i run a music studio, dj off of mp3's as well, and edit video in my spare time
so, i've got terrabytes of data, on multiple external and internal hard drives, and have therefore invested in 2 (two) 1tb time capsules. however, there doesn't seem to be an easy way to set them up to both backup my different and various hard drives on one computer! at the moment, i can get both visible on one network, but only one TC at a time will backup, the other just sits there gathering dust as far as i can tell.
i'm running a mac pro, os 10.5.8, with an 4 disc external drive - 3 disks with various data (one contains video data, one mp3s, and one protools recording data) and one running super duper to make weekly clones of my main hard drive. i'd like to configure one time capsule to backup, say, my hard drive and protools disks, and one time capsule to backup the video and mp3 drives.
i've searched quite bit on google and here for a solution, but there's a dearth of information on this subject! hasn't anyone else out there done this? surely i'm not the only person out here with loads and loads of critical data in his home needing more than one tb of backup...

messiah wannabe wrote:
what can i say, i run a music studio, dj off of mp3's as well, and edit video in my spare time
so, i've got terrabytes of data, on multiple external and internal hard drives, and have therefore invested in 2 (two) 1tb time capsules. however, there doesn't seem to be an easy way to set them up to both backup my different and various hard drives on one computer!
That is correct. For backups, the Time Capsule is basically just a dumb HD; the Time Machine software on your Mac is what controls things, and it can only have one destination at a time, whether it's backing-up one or multiple HDs.
i'm running a mac pro, os 10.5.8, with an 4 disc external drive - 3 disks with various data (one contains video data, one mp3s, and one protools recording data) and one running super duper to make weekly clones of my main hard drive. i'd like to configure one time capsule to backup, say, my hard drive and protools disks, and one time capsule to backup the video and mp3 drives.
Again, TM won't do that. Only one "instance" of TM will run at a time, and you can only have one set of exclusions (to limit what it backs up) at a time.
i've searched quite bit on google and here for a solution, but there's a dearth of information on this subject! hasn't anyone else out there done this? surely i'm not the only person out here with loads and loads of critical data in his home needing more than one tb of backup...
No, but it's fairly rare, and few want to do this wirelessly. And note that Time Machine was not designed for such situations, but as a very simple, "set it and forget it" backup tool for the novice to intermediate user, who's likely never used any backup app at all.
For a Time Capsule to back up everything (except the clone), about your only option is to forget the TC's internal HD. Instead, get either a single external HD that's 2 or 3 times the space of what you want backed-up, or enough smaller ones that you can make a +Concatenated RAID set+ large enough. Attach this to the TC and back-up to it.
But for that much data, this is a very slow and cumbersome solution.
You probably need a mixed solution of some sort; using Time Machine to the Time Capsule for your boot drive and as much of the more volatile data on the other drive(s) as is reasonable; then SuperDuper or another app to back up the other data to an external HD.

Can I use my time capsule to back up or save files from my pc?

My time capsule works great with my 2 Macs. I just got a PC and would like to know if I can use the time capsule to back up or save files from my PC?

You can.. but obviously PC is missing TM.. so you will need to use a backup software.
Saving files to the TC is not really recommended.. but as long as you have lots of space is unlikely to cause problems.. the whole idea of TM though is to keep incremental backups on an hourly basis and will slowly fill the TC.. once space is short.. it can get messy.
Also read Pondini who is positively against using it for other files.
http://pondini.org/TM/TCQ3.html
I suggest you read .. skim at least the FAQ so you actually understand what TM - TC is all about.
A USB drive plugged into the PC makes a better backup
1. It is formatted NTFS, ie native format and readable by any windows computer. A TC is a network device.
2. USB drives are cheap. You can use 2 of them and store one offsite.
3. USB traffic is not on the network.
4. Storing files on the TC is bad as it is a backup target not itself backed up.
5. In a pc you can add drive after drive after drive.. (assuming a desktop since you didn't say laptop). Only a Mac Pro can do that in the Mac world.. internal drives are cheaper than a. USB drives, b. network drives. And they are 10x or more faster.

Can i use my time capsule as back up without hooking it to internet

Can I use my Time Capsule as a back up without hooking it up to the modem?
Can I use the Time Capsule as back up without hookig it up to internet?

Yes, but it is extremely poor setup.
The TC does not have to be the main router.. normally you can plug it into the main router and simply bridge it and leave the wireless off even.. it then sits there as a dumb network drive.
If you setup the TC with no internet connection then the computer that backs up to it, must lose internet connection while doing backups.. In stand alone simple setup the TC as router. and ignore all the issues with disconnected WAN. When you want to backup change over the computer wireless or ethernet to the TC.
It is clunky and you will lose the whole advantage of time machine.. automated backups.
I recommend you simply buy a USB drive. it is faster, more reliable and less costly.

Time Capsule Wont back up with Yosemite

Similar Messages

Maybe you are looking for