Time Capsule Works for a while, then starts faililng.

Time Capsule is my only wireless access point/Time Machine backup, single 1TB HDD.
It'll work great, has about 792GB Backed up to it from my three computers in the house.
My wireless devices are:
Apple TV (40G)
iMac Core 2 Duo
Mac Pro
Nintendo Wii
IBM Thinkpad (evenings)
iPhone
Every once in a while, with no discernable pattern, my Time Machine backups start failing.
Looking in the error logs under console I see this message:
5/5/08 4:46:40 PM /System/Library/CoreServices/backupd[5531] Starting standard backup
5/5/08 4:46:40 PM /System/Library/CoreServices/backupd[5531] Mounting disk image /Volumes/Tom Boucher's Time Capsule/antares.nomorestars_0017f20240ac.sparsebundle
5/5/08 4:47:01 PM /System/Library/CoreServices/backupd[5531] Failed to attach to disk image, returned: 35
The only way I can get it to fix is to reboot the time capsule.
Any ideas what is causing this?

You may have enough bandwith for USB audio if your USB ports are 2.0 but, as the Li've! 24-bit External seem to be USB . device, the limitation may come from there. But still, it should work w/ 6-bit/44. kHz w/o bandwidth issues.
Do you have IRQ(s)/resources for those USB controllers, you have plugged the device, shared w/ some other devices/controllers?
Have you tried w/ USB-ASIO drivers?
jutapaMessage Edited by jutapa on 0-0-2006 08:26 PM

Similar Messages

  • My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.

    At present I have no power to the Gen 7, so need to get some power to it I think.  I pressed the buttons as you suggested, but nothing is showing up at this point.  Thank you for your response as the more I can rule out before  I take it back the better I think.

  • My time capsule worked for several weeks and is now telling me backup disk not available? What to do?

    My time capsule worked for several weeks and now is not backing up. Tells me backup disk not available? Any suggestions?

    This is a lion bug..
    Generally just rebooting the TC will get it back. Otherwise you need to reset the TC and redo its setup.
    Tell us a bit more.. but there is as yet no work around or fix for lion.
    Certain things help.. but wireless is also a weak link. It will generally work better by ethernet.
    Try and get back if it is still bugging you.. I can suggest some other things.. but I do not know of or read a bullet yet.
    (Snow and TC firmware 7.5.2 which I run do not have this issue.. so the bug was introduced with Lion and 7.6 firmware)

  • I boug ht an ipod touch it worked for a while then it went in to dfu mode and said to plug in to itunes and i did but that didnt do anything and it wouldnt show up on itunes ethier

    i bought an ipod touch it worked for a while then it went in to dfu mode and said to plug in to itunes and i did but that didnt do anything and it wouldnt show up on itunes ethier plz help

    Try:                           
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • Photostream works for a while, then stops and won't upload to iCloud anymore.  Rebooting the phone resolves the issue.  Anyone know why?

    I have an iPhone 4S.  Photo stream works for a while but then it will just stop and not upload any photos to iCloud.  Rebooting the phone resolves the problem.  This happens very often and is frustrating for something that should just work.  Once they get uploaded, they are downloaded to other devices without a problem.
    Any idea what could be going wrong with it?  I hate taking pictures of stuff that I need on my other devices not knowing if they're going to make it there or not.
    Thanks!

    Hey Allistah,
    Thanks for the question. After reviewing your post, it sounds like Photo Stream works but stops and a restart fixes it. A frustrating situation for sure. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iCloud: Get help using My Photo Stream
    http://support.apple.com/kb/TS3989
    Close the Camera app on the device that took the photo. Photos won't upload from an iOS device to My Photo Stream until you close the Camera app.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Does time capsule work for windows

    Will Time Capsule work on Windows computers?

    Yes.  It's just a network drive to Windoze.  Once you find it browsing the network (assuming you named the worksapces riht, etc.), it will pop up on the list of network drives, and from there you can assign a drive letter to it and keep it auto-mounted.
    However, with windoze 7 home, their new built-in 'backup' won't touch it, or use it in any way, because Micro$uck considers backup to network attached storage a 'premium feature' that mere home users shouldn't have access to.
    However, any other backup software that isn't ******** will copy to the drive, if you assign a drive letter to it.  Including 'xcopy /h /e /r /d /i /c /k /y D:\mystuff Z:\backup', assuming you mounted the Time Capsule as 'Z'.

  • Safari will work for a while, then slows to "Spinning Ball of Death" & typing jumps, erases & may not space

    I have a 10.5.8 Macbook, Leopard & almost exclusively use Safari. Got it in November of 2008. (Trackpad Clicker has not worked for ages. I have to use a mouse.)
    Also, just recently, when using the keyboard to type, I may lose most if not all that I just typed, sometimes it doesn't space or move down more than to next line & often when I hit a symbol key, the cursor may end up anywhere.
    For ages it has been doing what is stated in Subject/Question.
    I can use it for a while, frequently clear Safari Cache. (Can't seem to clear Home->Library->Cache anymore. Much in there, but I fear that with the problems that I have had with this Mac since the first year that I will remove something that is necessary & really shouldn't be in that Cache. I did do it a few times way back, but it won't even let me move things to trash anymore.
    I know that I need a new Macbook, but I can't afford one & really need larger than a 13" screen, as I have 3 different eye problems. My friend got a deal on a  "bells & whistles" Toshiba 17" laptop during "Black Friday" for something over $400. Something comparable in a Macbook would be ~$2,800-2,900 plus tax!!! Ridiculous. I got a Mac to not have to deal with viruses & the like & to have  one like my musician friend who needed direction with a computer & wanted a Macbook because of the "Garage Band". I bought mine ~3months after he bought his & wouldn't you know, mine is a Leopard & his a Tiger AND they had upgraded "Garage Band" on mine... so, nothing in common.
    I have had nothing but trouble with my macbook since 1 year after I got it. As I was trashing what should have been "unsaved" & "saved" downloads, I happened to have my iPhoto open & near the end, I walked by to see all of my photos & documents disappearing to trash. Nothing has been the same since. The "Genius" was rude & no one could tell me what went wrong or fix my problem. I had over 8,000 items that were no longer in folders or albums or anything. All that was done was to move them from my trash to desktop to ONE folder for which I was left to deal. (Possibly go back to that time in my Time Machine??? But don't really know how to "pick out" all that was good, leave out the "mess" & still have all the new that I have done in the past 2.5 years??)
    I had paid for 1 year of classes AND for the 3 year coverage & APPLE CARE. I was on the phone with those guys for hours & hours & months on end to NO avail. I am not a "happy camper". I think that they owe me a new one, even after all this time. My intent was to write them a very long detailed letter, but lightening has struck my house & fried all my components EXCEPT this "P.O.S", which would have been paid for by the Insurance company... Argh. And then my freezer went out & the new one was "DOA" & I have been fighting them & my dog has been lame for a year now, & I am a non-practicing vet, because of debilitating Depression. It has been over 10 months & my roof & chimney are still not repaired. I know... "TMI", but I guess I am venting to let you know why I haven't addressed Apple about my "P.O.S" macbook.
    Any help wrt new WARNING message,(previous question), Safari winding down every time after some use, why my keyboard is going nutso & what to do about all the 1000's of files that are in my Macbook, (I thought that we moved most of them to an external HD, My Book. I have one for the Time Machine back up & one for "Storage". But, alas, it seems that most are still in my macbook & there is very little memory & that may well be a big part of my problem.)
    Thanks for bearing with this "newbie on here".
    I realize now, that this probably should have been at least 3 questions or more, sorry. If I have to redo, I will.
    Just wrote a separate one regarding the "WARNING-SUSPECTED PHISHING SITE, every time I click on a new website on Safari.
    Thanks to any & all. (Forgive me, if I don't know all the ettiquette & rules of this site. (Be kind & guide me.)

    Hello & welcome, let's see if we can help out here!
    See if the Disk is issuing any S.M.A.R.T errors in Disk Utility...
    http://support.apple.com/kb/PH7029
    Open Activity Monitor in Applications>Utilities, select All Processes & sort on CPU%, any indications there?
    How much RAM & free space do you have also, click on the Memory & Disk Usage Tabs.
    Open Console in Utilities & see if there are any clues or repeating messages when this happens.
    In the Memory tab of Activity Monitor, are there a lot of Pageouts?

  • Does Time Capsule Work for Anyone???

    I have a 3TB TimeCapsule and Mavericks on an iMac that about a year ago filled up and I had to restore from the backup (for reasons I forgot) and it royally screwed up permissions for files that I am still fighting.
    About two months ago, I got some sort of window that said after verification TC was starting a new backup for my own good (thereby losing all versions of previous backups).
    Today, with 1.59TB available out of 3 I got the error below, ran Disk Utility (it took over two hours with a huge History log) and apparently the TC disk is beyond repair and I'll have to reformat and lose all my versions AGAIN.
    After the last mishap I occasionally backup my iMac to a 2TB external drive via SuperDuper.
    It appears the weak link in my backup strategy is Time Capsule as it fails ALL the time and I have to start over
    So, right now I trust it like a 5lb doorstop and I can do the wireless stuff with a much cheaper AirPort Express.
    Is there anything I can do to get this doorstop back into reliable working condition (i.e. it started a new backup just two months ago)?
    I've learned to live without recent versions because either when the disk gets full or during routine backups they aren't available with TC anyway.

    apparently the TC disk is beyond repair
    Correct.
    Its hard disk can be replaced, with some difficulty. iFixit has instructions.

  • Since the Nov update about a third of my songs have a circle with an exclamation mark inside it. These song will not play on my computer. I reload with my own cd collection, it works for a while then the same thing happens. Message says "Song could not be

    Since Nov update about a third of my songs have a circle with an exclamation mark inside the circle. These songs will not play on my computer. Message says  "The song .... could not be used because the original file could not be found. Would you like to locate it?"  I have reloaded these back onto itunes with my own CD collection. They work for a short while, then the same thing happens. I don't  know what is causing this or how to fix it.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Airport Express: Works for a while then drops

    I have an Airport Express extending my Time Capsule base station. I've moved it out to the garage, and it works pretty decently even though it's pretty far away from the base station.
    But in order to get it working, I have to unplug/replug to get it to connect. It lasts fine for the few hours I'm around it. But the next day when I return, it has dropped completely and the yellow light starts flashing. Unplugging/replugging resets it and it connects back up fine.
    Any idea what's going on?
    Thanks!

    It appears likely that the Express is too far away from the TC to receive a reliable signal. See if you can relocate it so that it has a clear line of sight to the TC.

  • Remote works for a while, then fails to connect

    I upgraded my first-gen iPhone to software v2.0, and installed the Remote app. It connects to iTunes on my Mac and it works fine, for a while.
    Then an hour or so later, when I launch the Remote app again, it gives me the "Could not find library" error.
    The only way to fix this is to close & restart iTunes on my Mac.
    Rebooting the iPhone doesn't help. I've got the firewall disabled on my Mac. And the Mac is set to never go to sleep.
    The computer is a Mac mini running OS X 10.4.11, with the latest version of iTunes (currently 7.7.1).
    Any ideas?
    Thanks,
    Anthony DiSante

    ...aaaaand I've now upgraded from 10.5.1 to 10.5.4; that also didn't fix the problem.
    I've discovered that disabling & re-enabling the computer's network connection does fix the problem. So as a workaround, I've created 2 new "Locations" in my Mac's network preferences, one called "Online" and the other "Offline", in the latter of which I've just disabled all the network adapters. I then created the following script (which I named togglenet.sh):
    #!/bin/sh
    scselect Offline
    sleep 5
    scselect Online
    So I can execute that by SSHing from my iPhone to my Mac. Or I might install Apache on my Mac so I can make a CGI script out of it, so I'd just need to hit the page using Safari to run it.
    So, at least there is a workaround; but I REALLY hope Apple just fixes this friggin' bug.

  • Strange issues with W7 shared Laserjet 1020 to XP machine - works for a while then stops

    I have a principal with a Windows 7 machine and a Laserjet 1020 printer.  The assistant Principal (XP machine) wants to print to his printer.
    When the printer is shared - it will work for a day or two then it will stop responding.  The print jobs from the W7 machine will just dissapear.  They won't even go in the print que.  Stopping and re-starting the print spooler doesn't help, power down of the printer doesn't help.  The ONLY fix seems to be to delete the printer and re-install.  HUGE pain!!!
    I have made sure bi-directional is UNCHECKED and it still has these issues.
    I re-installed the printer and didn't share it and it has now worked flawlessly for over a week.
    But I really need this share to work!  HELP!!!  I've never seen a problem like this before!

    I have a principal with a Windows 7 machine and a Laserjet 1020 printer.  The assistant Principal (XP machine) wants to print to his printer.
    When the printer is shared - it will work for a day or two then it will stop responding.  The print jobs from the W7 machine will just dissapear.  They won't even go in the print que.  Stopping and re-starting the print spooler doesn't help, power down of the printer doesn't help.  The ONLY fix seems to be to delete the printer and re-install.  HUGE pain!!!
    I have made sure bi-directional is UNCHECKED and it still has these issues.
    I re-installed the printer and didn't share it and it has now worked flawlessly for over a week.
    But I really need this share to work!  HELP!!!  I've never seen a problem like this before!

  • Sending Mail works for a while then stops

    Im having this issue since I upgraded to Lion... When I open mail I can send a couple of emails then its stops.. It looks like it doesnt recognize the stmp server anymore... so I close the program and then start again... I have another couple of emails i can send then it stops functionning... quite annoying... I erased my account and made a new one... same problem... anyone has an idea whats going on?

    Hey Allistah,
    Thanks for the question. After reviewing your post, it sounds like Photo Stream works but stops and a restart fixes it. A frustrating situation for sure. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iCloud: Get help using My Photo Stream
    http://support.apple.com/kb/TS3989
    Close the Camera app on the device that took the photo. Photos won't upload from an iOS device to My Photo Stream until you close the Camera app.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Range expander works for a while then doesn't

    My range expander works fine most of the time so I know that it's set up ok. The problem is that  both LED's will be blue for a day or two and then I'll notice that the Link LED is blue for four seconds then flashes red for a second and continues this until I unplug it and then plug it back in. When it's doing this "flash thing" my computer still works but is EXTEMELY slow in changing pages and obeying commands. What does it indicate when you get the "four second blue/one second red flash" and does anyone know how to keep it from happening so often? I have a linksys wireless-G router FYI. Could it be an interference problem from a microwave oven or something like that in my house?

    There are many Devices which interfere with the Wireless Connectivity. Try to keep the Cordless Phone, Microwave away from your Router, Range Expander and from your Wireless Computers also.
    If you still face the same problem, then you can try to re-flash the firmware on your Expander.  Once the firmware is upgraded on your Expander then you need to reset your expander and re-configure all the settings on it from scratch.

  • How does time capsule work for PCs

    looking for a wireless backup option for my MacbookPro and my HP Desktop, so want to be sure that the wireless backup options / software works on both platforms and there are no hangups

    You might want to take a look at Genie Timeline Pro and contact their support folks to check on current compatibility with the Time Capsule.
    Genie Timeline Pro | Overview | Time Machine Backup Software for ...
    I have not used this product, but my neighbor loves it says that the software will allow automatic backups to a Time Capsule.

Maybe you are looking for

  • COPA derivation for thecombination of Cost center and Cost element/GL accou

    Hi Gurus, In COPA derivation using KEDR i am trying to make a derivation for the combination of Cost center and Cost element. Here i got following problems • While posting FI document using t.code FB50 system not automatically updating the fields Cos

  • I can't restore my i pod, i get error 80000001

    i can't restore my i pod its locked becouse i lost my password, geting error 800001.

  • Two questions concerning N80.

    Hi All, I'm preparing to buy an N80 mobile so plz advise for the the next 2 questions. (1) Does the N80 supports VoIP over WLAN (for e.gkype)? (2) What r the advantages of either N80 and E70 over each other, other than the Keyboard? Plz reply even on

  • Static methods in concurrency

    I have a static method which takes a few String and double parameters and contains only local variables. When it is called by multiple threads there seems to be an exception thrown intermittenly. I got a little paranoid and so I've changed it to an i

  • IPhone dictionary won't recognize a word I've used a million times...

    so from one day to the next my iPhone decided not to make the auto correction on the word "I'm" anymore...I used to simply type "im" and it would change it to "I'm". Now it won't anymore! I've tried resetting the dictionary Settings>General>>Reset>Re