Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Similar Messages

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion

My wifi network is 802.11n but there are times changing for 802.11g, and have to restart ... after the update for Mountain Lion... Help!!!
Several problems with Mountain Lion, APP STORE (login/logout error), WIFI(802.11n for 802.11g), MAIL (horrible)... Apple, what is happening?

Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

HT1349 The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only t

The nice man Joseph Shen helped me with my google problem on my iPhone and worked for 2 days and now not working again please help me solve this problem were I can retrieve my messages on the I phone when I am not at home on my wi Fi is the only time it works correct. Bill. [email protected] 708 752 3667

http://lifehacker.com/5852948/what-to-do-if-youve-forgotten-your-iphones-passcod e

Why does the "fix" for firefox copying and pasting not work?

I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.

In what way is Firefox slow?
Is this all the time or only with loading web pages?
What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?

TS3682 i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast

i earsed my iphone frome icloud and it didn't never work it still loading for 3 hours and still not working ? please help me so fast

First man up and admit, that itunes does not suggest, but tells you that update is available and you made a
decision to download and update. Once you man up - think if you still under warranty. If that is not security
software according to the link provided, it is hardware. So second try another network, may be your network
has additional security or firewall. And third decide if it worth to you pay 149 for that phone or get it replaced.
Unless your 3gs under warranty.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

I have been having trouble connecting to my wifi on my ipad mini but my iPod is just fine......it will connect and then say "Unable to connect to network" I've tried resetting my ipad mini and turning off my router for 30 seconds and its not working.

What TC do you have? Model number direct from the base is a big help, it will be A1 followed by 3 numbers.. eg
A1409 Gen 4.. The new AC is A1470
How is it setup?
I need the whole network setup. what modem/router, how is the TC connected etc??
I also need to know what IP the ipod gets, so I can see what mode the TC or network router is working in.

IdM Scheduler and Time Change to Daylight Savings Time GMT to BST

This isn't really a 'question' , but just a topic for discussion.
We're not live yet, but will be by the time the clocks go back. So I'm just interest to hear everyone's experiences and any issues with regards to the switching to / from DST
I did some "interesting" (or not) tests last night to see what happens with Pending Values which are due to take effect at the time change threshold of 01:00 GMT when switching to Daylight Savings Time (BST) GMT +0100.
It seems as if the IdM scheduler keeps going according to UTC or GMT. However any values provisioned to target systems or to local tables using the ddm.datetime8601 system variable are in local time according to the runtime server or SQL server's locale settings.
I set up a task to output from a javascript the current system date
using the following in the functions.
currentTime = new Date();
return currentTime.toString(); // returns Locale Time String
currentTime = new Date();
return currentTime.toUTCString(); // returns UTC Time String
in the same pass I also output the ddm.datetime8601 system parameter and the ddm.time24 system parameter.
This task was to update a comment on an entry and Scheduled to run at 00:00:00 and was executed at 00:00:06 GMT all times were still in GMT as expected.
Local Time: Sun Mar 27 00:00:06 GMT-0000 (GMT) 2011, UTC Time: Sun, 27 Mar 2011 00:00:06 GMT, ddm.datetime8601: 2011-03-27T00:00:06, ddm.time24: 00:00:06
This task was scheduled at 01:00:00 in IdM and was exectued at 01:00:08 GMT by the runtime, and you can see the local time is being correctly reported as 02:00:08 BST. Note also the ddmdatetime8061 is also 02:00:08 i.e. BST.
Local Time: Sun Mar 27 02:00:08 GMT+0100 (BST) 2011, UTC Time: Sun, 27 Mar 2011 01:00:08 GMT, ddm.datetime8601: 2011-03-27T02:00:08, ddm.time24: 02:00:08
In the database the entry values MXI_VALUES ModifyTime field has the GMT / UTC timestamp.
I also set up some pending value objects to be applied at 00:59:59 and 01:30:00 to see if the 01:30:00 would be 'skipped' as the locl clock change would've gone from 00:59:59 to 02:00:00. Well the pending values were correctly applied and expired and no 'lost' transactions happened as a result of the change.
So essentially it seems to me that the IdM runtime and scheduler times are all based on UTC / GMT.
I guess it's only an issue twice a year if you're expecting something to happen at a specific local time 01:00:00 or if you've got a global user base and their account expiry should be in each user's own country's local time. In these cases, it would seem that you'd need to convert the schedule times and pending value times to UTC first before setting them in the database.
Has anyone else had any issues, thoughts, questions or suggestioins on scheduling tasks which span the DST time change when switching to and from Daylight Savings Time.
Edited by: Paul Abrahamson on Mar 27, 2011 10:51 AM

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Phone didn't change for daylight savings

my droid 4 did not change to daylights savings time last night, and I was very late, and what is up with that? this has never happened before. It finally changed at about 10 AM, as I was sending a text. all settings on the phone are correct for automatic time changes. has this happened to anyone else today?

Hello Sciaccajan
I'm sorry you were late! The issue you experienced was very odd. It may have been a delayed signal or an application that interfered. Please power down the device remove and reinsert the Sim card and retest. This will force the device to see all the towers.
JoeL_VZW
Follow us on Twitter @VZWSupport

Will my phone automatically change for daylight savings 2014?

I have to be at work tomorrow at 7. Will my phone automatically change over for daylight savings 2014?

kdsmini,
Sure...just make sure that you have Settings>General>Date & Time> "Set Automatically" selected.

Reminder times change with daylight savings time

How can I prevent my reminders from changing with daylight savings? I want the times to remain static throughout the year.

Michael,
I never have changed time zones. Are you suggesting I should have time zone support enabled ?
I just tried turning on Time Zone Support, then restoring my calendar using Time machine. No change here.
As I mentioned earlier, this same problem occurred in the fall (although I don't remember which way the event times moved), this time they moved forward. At the Fall change I was using a Mac G4, which I used as a target to build this machine. The only thing I can think of that makes me unique (although I'm not in that small of a group) is that I have altered one of the files in iSync to allow iSync to sync calendar events with iCal. The syncing has always worked OK.
Right now I'm leary of attempting to do anything with iSync. I'm also finding it difficult to believe I'm not one of 10,000 people experiencing the same problem, but I don't see any other posts.
I found a time zone in south america which returns my times to the correct figure, with time zone support enabled, but that looks like a deeper hole to dig out of.
Still stuck,
Bill

PSE 11 - MacOX 10.7.5 Printing Wide Format Printer and Profiles Not Working Correctly

Macosx 10.7.5
When I start up PSE11 and go to print I set up the paper size then select a Printer Profile. When print the image it is a mess and seem to be black and white it is as if I printed on the wrong side of the paper.
I then go and try to print it again.   Now it all works as it should beutiful colours and spot on. all other print following this works.
Then I shut down PSE11.   Start it up again. Guess what first print is a mess again.   all others after are fine.
I uninstalled PSE11, deleted prefs. and reinstalled PSE11.    Same thing..   first print a mess all others ok.
the issue can be replicated consistantly......
no problems with PSE10 or PSE9
any suggestions?????
cheers elo

Thank You for your suggestions.
I have been printing using PSE for over 14 years going back before the term PSE came up. I have done this professionally using profiles from others and those I generate myself..
All the things you mentioned have been done.
The main point missing in your suggestions is   It is only the first print every time I open up PSE11 that does not work...
at completion of print I immediately go back to the file command and say print and then bypass all settings and print again.   this time and every other print aafter are perfect...      I did not change one single setting...
I know about printer and adobe settings etc.     but thanks for going through the list it was a good reminder of how to remember everything sometimes we rush and forget something...
Finally    It works PSE6, PSE9, PSE10, CS5, Lightroom 4.   I think I have the settings right......
Any suggestions for how to get PSE11 to force the settings for the first print would be appreciated..
Only thing I have not done is upgrade to the latest version of the epson driver. Released less than a month ago to provide support for mountain lion.(iam only on lion) Maybe just maybe???   you never know.   Will try this when I finish by next batch of prints.
I will back up as I do weekly...    Still have the old driver from way back in release 10.5.8   will try to fire up to 10.5.8 and see what happens....
cheers elo
Message was edited by: Elo Laugesen

I have an iPhone 4 on contract and its not working correctly , what should I do ?

I have an iPhone 4 on contract , I only have this 5 and a half months and the iPhone is not working correctly and i do not have insurance .. What should I do ??

It sounds like you did not purchase it at the Apple store? That doesn't matter - you can still take it to Apple to troubleshoot it.
You can also try to troubleshoot it with the help of the folks here - if you want to do that, let me know and I'll ask that your post be moved to the iPhone forum where you're more likely to get knowledgeable answers, ok.

How do I get a refund for an App that does not work correctly?

How do I get a refund for a App (Express Newspapers) that does not work correctly?

How to report an issue with Your iTunes Store purchase

Macbook not changing for daylight savings

Um, yeah, so my macbook says it's 10 when really it's 9. I thought it would eventually change, but it's been about two weeks since daylight savings. I have no idea how to fix it. Please help!

Do you have ALL CF Server updates/hotfixes applied? I don't _know_ that any CF updates included the new rules for DST changing; but that's the first thing I'd check, if it were my system.
What web server are you using? Built-in, Apache, IIS? Could there be a setting in there that might affect the DST difference?
Just off the top of my head.
^_^

All Event times change with Daylight Savings time

With the time change associated with daylight savings time (March 8 2008) all my event times were changed by one hour. EG: events that were 8:45 am are now 7:45 am. I have tried using Time machine to restore to pre March 8 status,but an adjustment takes place and the events remain 1 hour ahead. I have looked through the discussions pages and don't even see the issue identified. I have looked through the menu and preference items and find nothing to help.
I am surprised not to find this a front page topic today, March 9 2008.
Can anyone offer some help ?
Bill Mullen

Michael,
I never have changed time zones. Are you suggesting I should have time zone support enabled ?
I just tried turning on Time Zone Support, then restoring my calendar using Time machine. No change here.
As I mentioned earlier, this same problem occurred in the fall (although I don't remember which way the event times moved), this time they moved forward. At the Fall change I was using a Mac G4, which I used as a target to build this machine. The only thing I can think of that makes me unique (although I'm not in that small of a group) is that I have altered one of the files in iSync to allow iSync to sync calendar events with iCal. The syncing has always worked OK.
Right now I'm leary of attempting to do anything with iSync. I'm also finding it difficult to believe I'm not one of 10,000 people experiencing the same problem, but I don't see any other posts.
I found a time zone in south america which returns my times to the correct figure, with time zone support enabled, but that looks like a deeper hole to dig out of.
Still stuck,
Bill

Time change for daylight savings and Alarms not working correctly

Similar Messages

Maybe you are looking for