Time change impact?

I recently noticed that my images needed to have 9 hours added to the capture time in order to have the correct time in the metadata. I added 9 hours to the capture time via Lightrooms option. However, after noticing that some of the buildings with clocks were still 1 hour ahead of the metadata capture time I made a note to add an additional hour to the capture time so everything would be in sync. Today, the first day of the change back to standard time, I looked at the clock images and the capture time in the metadata and noticed the images are now 2 hours behind the actual time shown on the clocks. Did the change to standard time, which is automatic on my computer somehow impact the capture time in my metadata also?
Don

LR does some funky things about time, and for some reason the time shown is impacted by the current computer time.
They're well aware of all the date/time issues, we're just going to have to wait for them to get fixed in a future version.

Similar Messages

Quota Warning message time change Impact

Currently its set to default at 1:00a. Some high profile users have compalined that these alerts wake them up at night..... cos they sleep with their phones. I have been asked to change the time of these warning. Just wondering if there
will a huge impact .... I am thinking to change this time to 11:30a ?
thank you

Normally, there will be little impact. However, to run it in the middle of the business day as you propose may cause it to take a while to complete, and could impact server operations otherwise. Would 6:00 AM or 10:00 PM work better?

Daylight Saving Time Changes in 2007 for USA

Can anyone give me solution how to handle Daylight saving Time changes in 2007 in USA for JDK 1.3.x releases? We are using this due to some vendor dependency. We can�t upgrade to higher versions up to middle of the 2007. I would be thankful if somebody gets back to me.

I have a similar issue where we cannot upgrade the jdk 1.1 without involving a lot of effort. If we keep the same old jdk, can someone tell me if use of Date and Calendar api will be impacted by the Daylight saving change.....provided the timezone is default and not explicitly set to EST. Also there isnt any timezone related buss logic.

USA Residents: Early Daylight Saving Time *Changes*.

Apparently, a few folks are unaware of the changes & patch because for various reasons they do not check and/or use their Software Update Control Panel.
http://docs.info.apple.com/article.html?artnum=305056 About Daylight Saving Time changes in 2007

I have a similar issue where we cannot upgrade the jdk 1.1 without involving a lot of effort. If we keep the same old jdk, can someone tell me if use of Date and Calendar api will be impacted by the Daylight saving change.....provided the timezone is default and not explicitly set to EST. Also there isnt any timezone related buss logic.

I think I solved my time changing issues- hope this helps

Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "

As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.

IdM Scheduler and Time Change to Daylight Savings Time GMT to BST

This isn't really a 'question' , but just a topic for discussion.
We're not live yet, but will be by the time the clocks go back. So I'm just interest to hear everyone's experiences and any issues with regards to the switching to / from DST
I did some "interesting" (or not) tests last night to see what happens with Pending Values which are due to take effect at the time change threshold of 01:00 GMT when switching to Daylight Savings Time (BST) GMT +0100.
It seems as if the IdM scheduler keeps going according to UTC or GMT. However any values provisioned to target systems or to local tables using the ddm.datetime8601 system variable are in local time according to the runtime server or SQL server's locale settings.
I set up a task to output from a javascript the current system date
using the following in the functions.
currentTime = new Date();
return currentTime.toString(); // returns Locale Time String
currentTime = new Date();
return currentTime.toUTCString(); // returns UTC Time String
in the same pass I also output the ddm.datetime8601 system parameter and the ddm.time24 system parameter.
This task was to update a comment on an entry and Scheduled to run at 00:00:00 and was executed at 00:00:06 GMT all times were still in GMT as expected.
Local Time: Sun Mar 27 00:00:06 GMT-0000 (GMT) 2011, UTC Time: Sun, 27 Mar 2011 00:00:06 GMT, ddm.datetime8601: 2011-03-27T00:00:06, ddm.time24: 00:00:06
This task was scheduled at 01:00:00 in IdM and was exectued at 01:00:08 GMT by the runtime, and you can see the local time is being correctly reported as 02:00:08 BST. Note also the ddmdatetime8061 is also 02:00:08 i.e. BST.
Local Time: Sun Mar 27 02:00:08 GMT+0100 (BST) 2011, UTC Time: Sun, 27 Mar 2011 01:00:08 GMT, ddm.datetime8601: 2011-03-27T02:00:08, ddm.time24: 02:00:08
In the database the entry values MXI_VALUES ModifyTime field has the GMT / UTC timestamp.
I also set up some pending value objects to be applied at 00:59:59 and 01:30:00 to see if the 01:30:00 would be 'skipped' as the locl clock change would've gone from 00:59:59 to 02:00:00. Well the pending values were correctly applied and expired and no 'lost' transactions happened as a result of the change.
So essentially it seems to me that the IdM runtime and scheduler times are all based on UTC / GMT.
I guess it's only an issue twice a year if you're expecting something to happen at a specific local time 01:00:00 or if you've got a global user base and their account expiry should be in each user's own country's local time. In these cases, it would seem that you'd need to convert the schedule times and pending value times to UTC first before setting them in the database.
Has anyone else had any issues, thoughts, questions or suggestioins on scheduling tasks which span the DST time change when switching to and from Daylight Savings Time.
Edited by: Paul Abrahamson on Mar 27, 2011 10:51 AM

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Multiple instances spawned after daylight savings time change

This is a known issue and there is an SAP Knowledge Base Article created on this issue:
1448881 - Multiple instances spawned after daylight savings time change
Below is the information from the SAP Knowledge Base Article:
Symptom
Scheduled reports that are supposed to run once a day, run multiple times.
Duplicate instances are being created.
Environment
BusinessObjects Enterprise XIR2 SP5
BusinessObjects Enterprise XIR2 SP5 + FP5.x
Reproducing the Issue
A report is scheduled to be run on a daily basis - this is a Recurring schedule.
Normally the report runs once a day, at a particular time.
After Daylight Savings Time change, the report runs at the specified time, but immediately after the successful instance, another instance is spawned.
Many more instances spawn after each instance completes.
Cause
This is a known issue: ADAPT01318487. This issue is because of DST and how our code handles this change.
Resolution
There is currently no known fix for this issue. There is however a script that can quickly resolve the problem.
The issue it seems is related to Daily recurring schedules.
What this script will do:
it will run a query to display all your DAILY Recurring jobs
you will have the option to choose your jobs and reschedule them by 1 hour
you will then highlight the same job and change them back by 1 hour
by modifying the schedule times, you are modifying the schedule itself and this will keep the issue of duplicate instances from occurring.
Exact Steps to Complete:
Stop the Job Servers.
Double click on the .hta file.
Change the System Name to that of your CMS name.
Add the Administrator's password.
Click Logon.
Click List All Recurring Instances.
Select All.
Make note of what it says in: Schedule Selected Recurring Instances: Should be 1 hr earlier.
Click Reschedule Selected Recurring Instances.
Choose All instances again and change Schedule Selected Recurring Instances to 1 hour Later.
Click Reschedule Selected Recurring Instances.
Now start your Job Servers.
The issue should not occur again.
The Script is attached here, but please review the SAP Knowledge Base article 1448881 as well

Hi Nicola,
- The multiple spawned instances issue ONLY affects XI3 SP3+ only. For XI3 SP1 and SP2 all Fix Pack levels this is not an issue as it was introduced as a problem in SP3.
- 1568239 notes the Java version and can apply to all O/S environments and is updated to reflect that.
If you are located in Europe you can also apply the patches in advance of the DST change to avoid the problem. If you are in Americas at this point utilizing the clean up scripts for this year is the approach needed to clean up the spawned instances and reschedule the existing schedules.
Thanks,
Chris

Since Time Change, iCal and iPhone Calendar Time Are All Messed Up

Ever since the most recent daylight-savings time change, I noticed all events I created in iCal, when synced with my iPhone, became an hour off. If I edit the event on the iPhone, it stays the correct time on my iPhone, but when it syncs with iCal again, the time on iCal goes off by another hour, even though the time for the event on the iPhone stays correct. (Hopefully that makes sense) Has anyone else experienced this problem? It is incredibly annoying, because now I have no trust in any of my calendar entries as to what the correct time is.
As an example: I created an event for Sunday the 16th on iCal on my Mac for a 1-hour soccer game from 8:00PM - 9:00PM. When I synced my iPhone, I noticed a few days later that the event on my iPhone now said the event was from 9:00PM - 10:00PM...one hour off! I edited the event on my iPhone, and re-synced. Now my iPhone has the correct time (which I manually edited on the phone) but iCal now says the event goes from 7:00PM - 8:00PM. Again, an hour off, but in the reverse direction (an hour off early, rather than late). When I sync now, even though the times on the iPhone and the times on iCal don't match, they do not change...it's as if either the computer or the phone didn't recognize daylight savings time or something, and thinks it has the correct time for the event. Both my Mac and my iPhone's clocks do display the correct time and date, however, so it's not like the system clock is off. It is completely bizarre, and I entered my entire teams schedule this way, so ALL games were off, and now is completely screwed up. Please help.
Message was edited by: Hamster Huey
Message was edited by: Hamster Huey

Yes, I did. I posted an identical post in the iPhone forum since no one answered here. http://discussions.apple.com/thread.jspa?threadID=1791145&tstart=0
The first reply solved the problem. It involved the Time Zone setting in iCal Advanced preferences for me.

Need to add date/time stamp to file name without time change creating new files

We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg ‏46 KB

I need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi ‏29 KB

Time change for daylight savings and Alarms not working correctly

we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

Read here:
http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

Auto Time change, Sound mute and trying to read something before windows 7.

Dear,
I recently bought a MacBook Pro i7. I installed Windows 7 Ultimate through Boot Camp. But after installing i am faceing few problems as listed below:
1: *Automatic Time change*
When i am in windows 7 and i switch to Mac OS X the time of my Mac OS X automaticly changes every time and i have to adjust the time every time i switch from Windows 7 to Mac OS X. This problem is when i change my operatinf system from Win to Mac.
2: *Sound Mute*
Whenever i log into Windows 7 i always fine the sound to be mute and i always have to unmute the sound from the button.
3: *MacBook trys to read something before Windows 7 starts booting*
Whenever i start windows 7, before the windows 7 booting screen, there is a black screen with a gray underscore (_) which blinks for a minute or two. And after that the booting of windows 7 starts. That (_) makes me wait a lot before booting into windows 7.
Please help me regarding these problems of mine. I even called the Apple care but they dint have any solution to it.
Waiting for your reply.

hi,
I tried all the methords as u said and it dint work atoll for me. If you have a video or some kinda software which can dignolise these problems than i feel that i can do it. Neways im rely getting so ****** off that after buying such an expensive product, it cant give me complete satisfaction, I feel that apple should first make their current products perfect and then go on launching some other products. Apple shoudent lie to sell it products that windows is compatible with MacBook. I went to a authorised service center Unicorn Infosolutions Pvt Ltd situated in Mumbai,Maharashtra,India. Even they said that all these three problems cant be resolved. This is rely bad, i never thought that apple is like this!!!! i always was a fan of apple n used to always pro-vogue people to buy its products. But now i dont think so. Neways if buy chance there is some other methord or way than please tell me.

Problem with times changing when synching to calendar

when I sync my Ipod to my calendar program (Microsoft Outlook), the times change on the Ipod. EG, if something is on my Outlook calendar for 5 pm, it will show on my Ipod for 8 pm.

In the Pages Preferences > Auto Correction deselect Automatic list detection.

Will my phone automatically go one hour ahead tonight for the time change? Also, if I set my alarm will it go off at the time it's supposed to, or an hour later?

I live in ny and was wondering if tonight with the time change, will my iPhone automatically change the time? Also, if my alarm is set to go off in the morning, will it go off an hour later, or at the time that its supposed to?

On your iPhone, go to Settings > General > Date & Time.
If you have Set Automatically selected, the date and time for your iPhone is set automtically based on the tower your iPhone is connected to with your cell phone carrier.
The date and time will be changed automatically on your iPhone based on your carrier changing the date and time at the tower your iPhone is connected with.
If the date and time is changed automatically on your iPhone, the alarm wiil go off at the selected time for the alarm. If you need to ensure you don't miss waking up at the designated time, I would use a backup alarm that is not based on the date and time being changed by your cell phone carrier.

After time change, airport "out of range"

Since my 12" powerbook underwent the daylight savings time change, its connection with my airport extreme is failing. It will establish a connection but will drop the connection after a few minutes and report that the airport is out of range (though my laptop is well within range). I have tried resetting both my DSL modem and airport along with all of my settings through the airport admin utility but continue to experience the problem. To re-establish the connection, I can turn the airport off in the internet connect application and turn it back on and it will find my airport network and show that the PPoE connection has been active. I can connect via ethernet without experiencing the connection failure and can also maintain a connection on my neighbor's wireless.

The daylight savings time change should not have affected anything.
To help, could you reply with your operating system version, AEBS firmware version, and Airport software version numbers?

How do I fix Firefox "untrusted websites" issues due to time change?

I'm on the east coast of the United States. Since the time change, firefox refuses to let me surf to a majority of my websites. I can't use Google because every time I search on something, the "new" google page (the link with the search terms) comes up as untrusted. I'm tired of trying to set exceptions for everything. And some pages (like Yahoo) won't even let me add them as an exception.
This is really getting annoying. I don't want to uninstall and reinstall Firefox because I'll lose my addons and settings.
Any thoughts on how this can be fixed? It worked fine until Sunday. Then everything went fubar. And my computer IS set to the correct new time. I am not going to set it to the summer time because that will screw up other things.
I'm using Windows 7 64 bit.
BTW, I did open up Firefox to look for updates. The updates installed and I'm still having this issue.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
If you increased the minimum font size then try the default setting 'none' as a high value can cause issues like you described.
* Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
* Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
If you need to increase (or decrease) the font size on websites then look at the NoSquint or Default FullZoom Level extension.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

Time change impact?

Similar Messages

Maybe you are looking for