Time collision error on work schedule that spans 2 days

I have the following work schedule set up
Sunday 19:30 - 06:30 11hrs
Monday 19:30 - 06:30 11hrs
Tuesday 19:30 - 06:30 11hrs
Wednesday 23:30 - 06:30 7 hrs
Thurs-Sat - off
I enter hours only via CAT2, no start/end times. I get the following error when trying to transfer my time to HR "Insert cannot be made due to collision". I make the following attendance time entries for a day, for example on 3/30/2014
3 hours
2 hours
1 hour
1 hour
4 hours
The time transfer (via CAT6) results in the following PA2002 records
3/30/2014, 3 hrs, start time 19:30:00 end time 22:30:00
3/30/2014, 2 hrs, start time 22:30:00 end time 00:30:00
3/30/2014, 1 hr, start time 00:30:00 - 01:30:00
The remaining 1 hour and 4 hour entry causes the time collision. What is strange to me is the transfer always posts the first record that begins past midnight (in my test case a PA2002 record is created with start time of 00:30:00) but the remaining time entries generate a time collision. I would expect the remaining 2 time entries to be as follows:
3/30/2014, 1 hr, start time 01:30:00 end time 02:30:00
3/30/2014, 4 hrs, start time 02:30:00 end time 06:30:00
Does anyone know why I am getting these time collisions errors?

Hi
How r u...... Hope doing well ......... check the date in 0003 infotype if so change ........ hope it helps u
regards
rajeshk

Similar Messages

The Question about mess "Customizing Error in Work Schedule Rule ..."

Dear all,
I run the Start-Payroll and I getting an error " Customizing Error In WSR for that Personal Number"
I configuration all of Time Management with start date is 01.01.2000 and when I run Payroll on Payroll period is 01/2000 with start date is 01.01.2000 to 31.01.2000 for Employees hiring on 01.01.2000 then I have an error " Customizing error in work schedule rule .. .. ... ..".
But I can run the payroll period on 02/2000 with start date is 01.02.2000 to 29.02.2000 for Employees hiring on 01.02.2000. form 02/2000 it is okies.
Please help me solve about my problem
Thank for your answers
Regds
Huyen Nguyen

Customizing Error in Work Schedule Rule
where are u getting this error
if it is PY log
Check GENPS this error will come under this Function
it is the combination of
ur Holiday calendar
Employee Sub Group
Personal Sub area Grouping
and ur Daily work Schedule Rule
Check the Start dats an end dates fo all the above Settings along with their Groupings in table V_T508A

Customizing Error in Work Schedule

Hello Experts,
I am getting the following error when running time evaluation, "Customizing error in work schedule rule 4 w1 52 REG1/2UP", 2 personnel numbers are being rejected. These two employees work during the summer. We reorg them to put them on leave, Inactive, so no acurals occur during the time they are not on the payroll. When these employees return, we reorg them back to Active. This time when we brought them back to active, we get the above error during time eval. I do not have a work schedule rule 4 w1 52 REG 1/2UP in table T508a. I do have work schedule rules 1 and 2 with w1 52 REG 1/2UP. These two emmployees have work schedule rule 1 w1 52 REG 1/2UP. I have changed the payroll status for retro calculation and I've checked that the employees do have IT0007. Does anyone know where to look to see how the system is coming up with work scheudule rule 4 and how to resolve this issue? Any suggestions are appreciated and points will be awarded to a solution provider. Thanks.

I have ran into this many times at work. Generally for us, this happens when an employee is moved into a new personnel area on infotype 1, where they require a different work schedule rule. However, infotype 7 was not updated for that same validity period and they have the incorrect work schedule.
Example:
Pers Area HYDZ
requires work schedule ZIND
Pers Area PSCC
requires work schedule ZDTA
The employee is in pers area PSCC until 12/31/9999 (with ZDTA on infotype 7). They transfer the employee into HYDZ effective 6/1/2008. However, infotype 7 was not updated and still has ZDTA. As a result, the customizing work schedule error appears during time evaluation. We have to create the infotype 7 record effective 6/1/2008 with the ZIND work schedule rule.
John.

Customizing error in Work Schedule Rule

Dear Consultant,
One of the employee left on 25th of a month. His termination process was run from 26th. Thereafter his Time sheet was uploaded upto 25th. The system accepts his attendance upto 24th but for 25th it gives error as "Customizing Error in Work Schedule Rule XXXXX". When his Personal work schedule was checked it shows expected working hours as 8. Then why it does not accept the attendance through time sheet?
Nothing can be wrong with WS Rule as it is still working fine for all others. Also when the time sheet is uploaded first & then the employee is terminated, it works fine. then why time sheet gives error only for the last day?
Regards
Bindumadhav

Hi
Pls check the action infotype 0000 for him
normally the if person is going to releive on say 25th ,then we have to give the leaving action date as 26 th as per SAP
Scenario.
consider his doj is 01.05.2006
if u done the leaving action on 26th by mentioning the date 25.09.2009
sap close him by 24th
and the record stored as below
01.05.2006 to 24.09.2009
delete the action and perform w.e.f 26 th then it will take as below
01.05.2006 to 25.09.2009
then u can upload time events
hope it will solve
with regards
partha
keep sharing and learning

Customizing error in work schedule rule 2 D2 40 RRTHOLR2

Hello Experts,
While simulating payroll , I am getting this error.
Customizing error in work schedule rule 2 D2 40 RRTHOLR2
esgrouping - 2
Holiday Calender - D2
Personnel Sub area grouping - 40
WSR - RRTHOLR2
my dws are starting with 1.4.2004
my pws are starting with 1.4.2004
my calender is between 2004-2015
and created Work schedule for 2004-2015
still getting the same error
Will you please help me out to solve this ?
Thanks And regards
Jaydeep Jadhav

Hi All,
I too faced the same type of error. Below are the steps for the solution.
1. The error comes due to retro run with incorrect workschedule rule in IT0007.
2. You can check table V_T508A or V_001P_ALL to view the complete groupings of your personnel area/subarea,workschedule rule, Holiday cal,
3. Copy the existing record of IT0007>give the retro effective period as start date and enter the end date>select the populated workschedule rule from the drop down option-->save the record.
4. Run the psyroll in simulation mode and check the status.
Hope it may help you..
Best Regards
Satya

Customising error in work schedule rule

Hi All,
While running the TM schema TM04, i am getting "customising error in work schedule rule".
I could successfully generate work schedule with the same work schedule rule for the period 01-2006 to 01-2008.
I have configured all the nodes under work schedule. I have maintained payroll control record with retro accounting date as 01-2006 and the payroll date as 02-2006(i.e i released the payroll for run, so period got incremented).
In 0003, i have given TM status as 9.
I want to know if i missed anything in configuration. Can you please help me in this regard.
Thanks,
Ravi

Hi Ravi,
You can also maintain the feature TIMMO.. the return value of this feature is Country Grouping..
You need to select the relevant country grouping and give the same as return value and activate the feature.
Regards
Sam
Reward the points if my answer helps you out

I am getting Payroll error in "Customizing Error in Work Schedule Rule"

Hi,
Iam using SAP HR ECC6.0. While running payroll i am facing an error saying "Customizing Error in Work Schedule Rule". I checked all my work schedule related configuration everything is correct. I have checked the Manual Work Schedule Creation. My Work Schedule is getting displayed for current year. Can anyone help me out in this.
Lakshmi

Hi Naveen,
How are you? I created the work schedule again and checked both Infotypes 0007 and 0001. My grouping is there. But now i am getting error saying "Payroll not possible because data is missing. No entry in Table WPBP". But i checked in SM30 there is no such table in the directory. I really don't know what kind of error is this?
Lakshmi

UWL CATS time approval error "No data exists that needs to be approved"

Hi all,
We approve CATS working time through SAP portal UWL. The user can see the workitem in her UWL inbox, but got an error u201CNo data exists that needs to be approvedu201D when he tried to execute the workitem. But the user is able to execute the workitem using Business workplace in ECC. We are using the standard UWL application.
This happens only to CATS time entries for certain type of employees (for example, the employees who do not report directly to the approver).
SAP Portal 7.0
SAP MSS 600 SP19
SAP UWLJWF 7.00 sp23
SAP ECC 6.0
Here is what I have found from my trouble-shooting. When I test (preview) the UWL iView, it seems to be working fine. But when I call up the iView from the portal MSS role, I got the error message u201CNo data exists that needs to be approved.u201D
Please let me know if you need more information.
Thank you,
Qi

I have found that the workitem ID is not passed to the CATS approval web dynpro program. Here is what is in the Item Type configuration XML. Is there anything missing?

 <ItemType name="uwl.task.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.OpenTasksTimeApp" defaultAction="launchWebDynPro" executionMode="default">
 <ItemTypeCriteria externalType="TS31000007" connector="WebFlowConnector"/>
 <Actions>
 <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
 <Properties>
 <Property name="WebDynproApplication" value="CatManagerApprove"/>
 <Property name="WebDynproDeployableObject" value="sap.com/msscatapproval"/>
 <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
 <Property name="openInNewWindow" value="true"/>
 <Property name="display_order_priority" value="5"/>
 </Properties>
 <Descriptions default=""/>
 </Action>
 </Actions>
 </ItemType>
 <ItemType name="uwl.forwardedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.ForwardedTimeApp" defaultAction="viewDetail"/>
 <ItemType name="uwl.futuretask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.FutureTaskTimeApp" defaultAction="viewDetail"/>
 <ItemType name="uwl.completedtask.webflow.TS31000007" connector="WebFlowConnector" defaultView="com.sap.pct.erp.mss.CompletedTimeApp" defaultAction="viewDetail"/>
Thanks,
Qi

Events in month view that span multiple days

Hi,
When I enter an event in iCal with a start time at lets say day 1 and an end time at day 3 it shows up as a multiday event in week view, but when I switch to month view it only shows the event and start time at day 1 and not the event at day 2 or day 3 with the end time.
Does anybody know how to overcome this?
THXS Henk

Same here. Though make it an all day event and it spans all day in month view.
Looks like an obscure bug (I'd guess most folks who have events that span more than one day just make them all day events. This is worth a bug report to Apple: http://discussions.info.apple.com/webx?linkprocess_@@.3bbae6ea

Time-zone independent events and events that span timezones

Hi.
I use Calendar rather heavily. In fact, I have events in my calendar that date back from 1995 or so that have migrated forward from my Newton through Palms and Blackberries and now to iPhones - some migration or coexistence between the Mac and these devices was painful, to say the least. But, I digress...
For the record, I have Time Zone Support off on my iPhone and iPad. It's also off in Calendar on my Mac; the Mac is my 'authoritative' source of calendar (and address book) info. When I move, it changes timezones. For the most part, the iPhone and iPad do the right thing for events that have actual real times to them such as meetings. If I'm supposed to be on a phone call at 7AM Seattle time, when I go to Boston, I need to be on at 10AM and it does all the devices do the right thing with those events.
But, I want to create a recurring (daily) calendar event that happens at the same local time every day, regardless of what timezone I'm in. For example, I create such an event in Seattle for 9AM Seattle time (PT). When I go to Boston, I want it to happen there at 9AM ET; and the same if I went to India - 9AM IST.
Any thoughts? I live with this inconvenience for other things working quite well.
My other desire is when, for example, putting airplane trips into the calendar. I'm in Seattle and putting in Alaska Airlines Flight 12 which departs Seattle at 9:05AM PT and arrives at 5:34PM in Boston (ET). It would be wonderful, if for the the start and end times for event scheduling, there was a pull-down or scroll-wheel from which one could select the time zone. Now, I have to do the calculation and do 9:05AM departure and 2:34PM arrival. It's gets a little more difficult when one is going to places where daylight savings is not observed or if you are unfamiliar with the time differences (as when flying direct from the US to India).
Any thoughts on this problem??
aps.

Hey Armando Stettner,
Thanks for the question, and what a great question it is!
With time zone support on, you can edit an individual event and change the time zone for that event. This list will include options for your default time zones, UTC, and "floating" - the latter of which is what you are looking for. Floating changes the event to occur at the specified time, local time.
For information on changing an event's time zone, see the following resource:
Calendar: Change an event’s time zone
http://support.apple.com/kb/PH11531
I look forward to hearing how this works for you.
Cheers!
Matt M.

How to fix an error (related to work schedule rule) in Time evaluation ?

Hi experts,
I am getting an error while running time evaluation - PT60.
Find the log
Log:TimeEvaluation General data
Schema ZM04 Time Evaluation Without Clock Times
00753402 Christoudas Natalie
Customizing error in work schedule rule 1 VM 01 5MTWTF Person rejected: 00753402
How to fix it? Its urgent.
Be assured of points for useful answers.
Rajesh

Hi All,
I have checked work schedules and work sc. rules. everything looks fine. Reason being fine, same work schrdule rule, i.e. 5MTWTF is used for other employees, whose payroll area, personnel area, personnel subarea, employee group and employee subgroups are same.
Why it is throwing error for one employee 753402.
I am providing you more information. In table V_T569r, if u select recalculation category as time evaluation, it is mentioned as 01.01.2003. Initially, one action called "Conversion take on" has been maintained as on 01.03.2002, where employee had payroll area -99 (payroll irrelevant) and personnel subarea - DAYY.
Then on 17.03.2008, another action ran "Conversion initial reassignment" where payroll area changed to "MT - monthly", subarea changed to DAYF. At that time PDC recalculation date in infotype 0003 was 01.03.2002 which was before recalculation date, i.e. 01.01.2003.
Time evaluation was throwing 2 error messages. one was solved by changing PDC recaluation date to 17.03.2008. But other error related to work sc rule 1 VM 01 5MTWTF still occurs.
Can some body now provide some useful information?
Thanks
Rajesh

Time :- Work Schedule Customizing Error

Hi Time Gurus,
I am running PT60 for a employee and getting the following error "Customizing error in work schedule rule 1 56 04 WW -A".
For this employee IT0007 look like this
01.07.2010 - 22.08.2010          WSR = WW -A
23.08.2010 - 03.10.2010          WSR = 05
04.10.2010 - 31.12.9999          WSR = WW -A
Now WW - A belongs to
ES Grping 1
PS Grouping 04
Holiday Calendar 59
and WSR 05 has following entries
ES grping 1
PS grping 04
Holiday Calendar 56
And there is no entry for 1 56 04 WW -A in T508
Than why i am getting this error for this employee ? ANy ideas?
Regards,
Navneet

Hi,
As per the details given by you, i understand that WSR = WW -A is assigned currently. Please check if the you have generated work schedule after changing from 05. If not, generate and than try.
Regards
Chandrashekar

How to stop events that span midnight from displaying on 2 days

Somewhere around SnowLepoard iCal's default behavior changed. It used to be that If an event spanned midnight (e.g. 7p-7a) then in the Month view it would only show up on the day the event started.
Now in Lion, it produces a colored bar that spans both days with 'ends 7am' on the right hand side of the bar in the second day. In Month view this is annoying and clutters the display when you have several consecutive events that span midnight e.g. three 7p-7a events in a row.
How can I get the old behavior back without editing events as many of them are from calendar subscriptions?

I work the same kind of shift, one that spans all night. Mine show with the start time on the correct day and another one for the end time on the next day.

Time Machine doesn't work

Hi guys,
I’m new on Mac. I have a new MBP retina display running on OSX 10.8.2. I used time capsule 2Tb as a external hard drive for Time Machine. It worked fine for about 10 days. Then it stopped backing up, not sure if it coincided in time with an upgrade of the operative system I did some days ago. At the beginning, TM didn’t report any error (for days). Airport is updated. TC has a lot of free GBs.
Since I noticed the problem I surfed the communities and found this is a common issue of users after upgrading to Mountain Lion. I tried many different solutions that were useful for many people, none of them worked for me. Let me show you some of these ways other people found to fix the bug.
Checked the names of the MBP, TC and network, remove appostrophies and spaces in those names.
Switched time machine off and on several times
Tried to reconnect to the TC server by the finder, so trying to avoid a ghost hard drive it appeared on time machine
Looked for a button to “Verify backups” that never appeared on my time machine menu
Soft reset of the TC
Full reset of the time machine
Around a pair of dozens restarts (TC, TM, MBP, networks…)
Excluded antivirus and dropbox files as potentially source of troubles
Disable the option “Put the hard disks to sleep when possible” on the energy saver preferences
Right now, TM says it has None backups done, and I cannot use Time machine. When forcing a “Back up now” it spends a minute “Looking for backup disks” but it never finds anything. Today a couple of error messages have finally come up: one said something like The backup disk image “/Volumes/Data/xxxxxxx.sparsebundle” could not be accessed (error -1).
The other was an error number of four digits, starting in 6 (sorry I didn’t copy it).
I don’t care if I have to delete previous backups, it would be ok for me. However, I don’t want to erase other big amount of data stored in the TC that is different from the backup image. I tried to delete the backup image file from the TC but I couldn’t.
I need help, please. MANY THANKS IN ADVANCE

My Time capsule didn't work for reasons unknown.
I'm posting this because the solution i found was not posted.
I reinstalled my Operating system. Here are the steps for anyone who needs them.
1. Goto Applications.
2. Then look for the "Utilities" Folder.
3. Click on the app called "Disk Utilities"
4. In the White box on the left, you will see your internal Hard Drive Icon.
Click on the very first Drive at the top of the list.
5. Look for the two buttons: "Verify Disk" and "Repair Disk". Click on the "Verify Disk" button ONLY!
This will verify if your hard drive has any internal problems.
6. After it finishes verifcation, the Details box will who the following list:
Verifying volume “Whatever the name of your drive”
Checking file systemPerforming live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume "Whatever the name of your drive" appears to be OK. (in Green Letters)
7. If your hard drive shows a green message like the one above, your drive is ready
to reinstall your operating system on it.
If your hard drive (SHOWS A RED MESSAGE) INSTEAD of a green message, your drive is NOT ready
to reinstall your operating system on it AND it will need to be taken to an Apple Genius Bar.
8. If your drive appears to be OK (in green), turn your computer off, wait 10 seconds and restart it.
9. Once the grey screne shows, hold down the "Option" button until something pops up on the screne.
10. Look for the "Recovery HD" grey Hard Drive icon.
11. Use the Up and Down buttons to choose your internet connection
(or none at all if it's automatically connected).
12. Use the Left and Right buttons to choose your Recovery HD Hard Drive icon. Click Return.
13. Wait for the Window called "Mac OSX Utilites" to pop up.
14. Choose the icon that says (Reinstall Mac OSX).
15. Everything else will be self explanatory.
16. Hope this helps. Your system will be reinstalled without any problems to the files on your computer.
This only works for Mac computers made 2012 and after. I have no knowledge of any computer systems before OSX 10.7.
My Time Capsule works perfectly. Hope yours does as well.

Can the iphone save my work schedule? Looking to jump on the iphone train.

Hello all,
My work schedule is a four days on in a row(14hrs per day), then four days off. This will repeat for the whole year.
Thanks for your time.

Some calendars will support repeats for specified days in a week from one event, but that's handling multiple weekly events and your requirement is for repeats on an 8 day cycle. The only way I know how to set up that kind of schedule is to schedule the first 4 days individually with an 8 day repeat on each individual entry. For that your calendar needs to support configureable repeats. If the Google calendar does, it's easy but it does mean you have to create 4 repeating events, one for each of your 4 working days.
The iPhone app can't do this, but it will pick up such schedules from whatever calendar it syncs with if that calendar supports that kind of repeat.
So check if Google lets you repeat events on a cycle of every x number of days. If so, create an event on each of March 32, April 1, 2, and 3 and set each to repeat every 8 days. Specify your end date separately each time—that can be the same day, such as December 31, for each event if you're doing a single calendar year—and simply sync with your iPhone.
Creating 4 separate events takes time but you may be able to reduce that by copying the first event to subsequent days. You'll need to do that 3 times, once for each of the other 3 days, but doing that is likely to be quicker than creating new events on each day.
If Google calendar doesn't allow that kind of repeat cycle, it's a matter of finding a desktop calendar that you can sync with the iPhone which does allow it. I know iCal on my Mac does but I'm unfamiliar with the Windows options.

Time collision error on work schedule that spans 2 days

Similar Messages

Maybe you are looking for