Time Constraint Error when calling a Function module from Webdynpro ABAP

Any help will be greatly appreciated - Thanks RM
Time Constraint Error
Information on where terminated
    Termination occurred in the ABAP program "SAPUP50R" - in
     "CHECK_TIME_CONSTRAINT_S1".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 1069
    of the (Include) program "UP50RU01".
Error occurred during batch input processing
Source Code Extract
      l_is_inconsistent = 'X'.
    ENDIF.
Check if there are inverted time periods.
    IF l_prelp_line-begda > l_prelp_line-endda.
      l_is_inconsistent = 'X'.
    ENDIF.
Check if there are overlaps or gaps.
    IF NOT l_prelp_before IS INITIAL.
      l_date_difference = l_prelp_line-begda - l_prelp_before-endda.
      IF l_date_difference <> 1.
        l_is_inconsistent = 'X'.
      ENDIF.
    ENDIF.
    l_prelp_before = l_prelp_line.
ENDLOOP.
IF l_prelp_before-endda <> '99991231'.
    l_is_inconsistent = 'X'.
ENDIF.
IF l_is_inconsistent = 'X'.
    IF p_access_type = 'R'.
490 Datenbankschiefstand Personalnummer & Infotyp &
      MESSAGE x490 WITH l_prelp_before-pernr l_prelp_before-infty.
    ELSE.
491 Unzulässige Daten Personalnummer & Infotyp &
Line 1069 Error occcurs >>>> MESSAGE x491 WITH l_prelp_before-pernr l_prelp_before-infty.
    ENDIF.
ENDIF.
ENDFORM.                    " CHECK_TIME_CONSTRAINT_S1     "XYVN0352581
*&      Form clear_no_adapter_needed              new     "XREN844998
      text
FORM clear_no_adapter_needed .
CLEAR no_adapter_needed.
ENDFORM.                    " clear_no_adapter_needed
*&      Form set_no_adapter_needed              new     "XREN844998
      text
FORM set_no_adapter_needed .
no_adapter_needed = 'X'.
ENDFORM.                    " clear_no_adapter_needed

Hi,
Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
Kr,
Manu.

Similar Messages

Time Constraint Error when calling a Function Module

Any help will be greatly appreciated - Thanks RM
Time Constraint Error
Information on where terminated
Termination occurred in the ABAP program "SAPUP50R" - in
"CHECK_TIME_CONSTRAINT_S1".
The main program was "MP000000 ".
In the source code you have the termination point in line 1069
of the (Include) program "UP50RU01".
Error occurred during batch input processing
Source Code Extract
l_is_inconsistent = 'X'.
ENDIF.
Check if there are inverted time periods.
IF l_prelp_line-begda > l_prelp_line-endda.
l_is_inconsistent = 'X'.
ENDIF.
Check if there are overlaps or gaps.
IF NOT l_prelp_before IS INITIAL.
l_date_difference = l_prelp_line-begda - l_prelp_before-endda.
IF l_date_difference 1.
l_is_inconsistent = 'X'.
ENDIF.
ENDIF.
l_prelp_before = l_prelp_line.
ENDLOOP.
IF l_prelp_before-endda '99991231'.
l_is_inconsistent = 'X'.
ENDIF.
IF l_is_inconsistent = 'X'.
IF p_access_type = 'R'.
490 Datenbankschiefstand Personalnummer & Infotyp &
MESSAGE x490 WITH l_prelp_before-pernr l_prelp_before-infty.
ELSE.
491 Unzulässige Daten Personalnummer & Infotyp &
Line 1069 Error occcurs >>>> MESSAGE x491 WITH l_prelp_before-pernr l_prelp_before-infty.
ENDIF.
ENDIF.
ENDFORM. " CHECK_TIME_CONSTRAINT_S1 "XYVN0352581
*& Form clear_no_adapter_needed new "XREN844998
text
FORM clear_no_adapter_needed .
CLEAR no_adapter_needed.
ENDFORM. " clear_no_adapter_needed
*& Form set_no_adapter_needed new "XREN844998
text
FORM set_no_adapter_needed .
no_adapter_needed = 'X'.
ENDFORM. " clear_no_adapter_needed

Hi,
Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
Kr,
Manu.

Error when call RFC Function module in R/3

Dear All,
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
we are facing the error "Error while lookup Exception during processing the payload. Error when calling an adapter by using the communication channel CC_PPPI_MES_RFC_Rcvr (Party: , Service: WCD_320, Object ID: 16563889b449328eac76caa6a3bc592e) XI AF API call failed. Module exception: 'error while processing the request to rfc-client: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'. Cause Exception: 'com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: failed to parse BAPI response due to: com.sap.aii.adapter.rfc.util.bapi.BapiException: Parameter with name RETURN not found.'."
This is the first time we are doing this configuration.
Could you please let me know what woulbe the reason.

read the original message
We are trying to call RFC function module CBIF_GLM1_PROCESS_ORDER_READ (This is not a BAPI and also not released ) in R/3 from XI system.
I am talking about the above Receiver RFC channel which you guys are using to call R/3 from XI. That where you need to change the commit parameter

ERROR: -Type conflict when calling a function module

hi to all,
when iam executing the program in browser   Type conflict when calling a function module error is showing, i have bind all the attribute correctly still iam getting error, WHEN I CLICK ON THE SEARCH BUTTON DATA IS NOT COMING TO MY TABLE ITAB1 plz help me....
DATA:
      NODE_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_NODE,
      ELEM_IP_SELECTION                   TYPE REF TO IF_WD_CONTEXT_ELEMENT,
      STRU_IP_SELECTION                   TYPE IF_PLANNING_HISTORY=>ELEMENT_IP_SELECTION ,
      ITAB TYPE TABLE OF ZSL_PL_UPDATE1,
      WA TYPE ZSL_PL_UPDATE1.
navigate from <CONTEXT> to <IP_SELECTION> via lead selection
    NODE_IP_SELECTION = WD_CONTEXT->GET_CHILD_NODE( NAME = `IP_SELECTION` ).
get element via lead selection
    ELEM_IP_SELECTION = NODE_IP_SELECTION->GET_ELEMENT( ).
get all declared attributes
    ELEM_IP_SELECTION->GET_STATIC_ATTRIBUTES(
      IMPORTING
        STATIC_ATTRIBUTES = STRU_IP_SELECTION ).
CALL FUNCTION 'ZBAPI_PL_UPDATE'
        EXPORTING
          GV_LIFNR           = STRU_IP_SELECTION-LIFNR
          GV_MATNR           = STRU_IP_SELECTION-LIFNR
          GV_GJAHR           = ' '
        GV_WEEK_LOW        =   STRU_IP_SELECTION-FROM_WEEK
         GV_WEEK_HIGH       = STRU_IP_SELECTION-TO_WEEK
      IMPORTING
        RETURN             =
        TABLES
          GT_PL_UPDATE       = ITAB
         DATA:
           NODE_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_NODE,
           ELEM_PLANN_NODE                     TYPE REF TO IF_WD_CONTEXT_ELEMENT,
           STRU_PLANN_NODE                     TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           WA1 TYPE IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE,
           ITAB1 TYPE TABLE OF IF_PLANNING_HISTORY=>ELEMENT_PLANN_NODE.
          LOOP AT ITAB INTO WA.
           MOVE-CORRESPONDING WA TO WA1.
           APPEND WA1 TO ITAB1.
          ENDLOOP.
       navigate from <CONTEXT> to <PLANN_NODE> via lead selection
         NODE_PLANN_NODE = WD_CONTEXT->GET_CHILD_NODE( NAME = `PLANN_NODE` ).
         CALL METHOD NODE_PLANN_NODE->BIND_TABLE
           EXPORTING
             NEW_ITEMS            = ITAB1
            SET_INITIAL_ELEMENTS = ABAP_TRUE
            INDEX                =
ENDMETHOD.

CALL FUNCTION 'ZBAPI_PL_UPDATE'
EXPORTING
GV_LIFNR = STRU_IP_SELECTION-LIFNR
GV_MATNR = STRU_IP_SELECTION-LIFNR
GV_GJAHR = ' '
GV_WEEK_LOW = STRU_IP_SELECTION-FROM_WEEK
GV_WEEK_HIGH = STRU_IP_SELECTION-TO_WEEK
IMPORTING
RETURN =
TABLES
GT_PL_UPDATE = ITAB
Problem is here
check out the type GV_GJAHR whether it accepts string type.
thanks
sarbjeet singh

Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

Hi Experts,
When I run my Application in Portal, i am getting the following error.
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
When I execute the BAPI, it is getting executed.
My Bapi Strucute:
Import Parameters
IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
Tables
IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
When I import the model, i am getting the structure like this
BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
> ZMM_Input1> Parameters
This is the way, how i am executing in webdynpro java
Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
Zptip_Asset eleInputAsset = new Zptip_Asset();
eleInputAsset.setSearch("ACRS");
wdContext.nodeZptip_Asset().bind(eleInputAsset);
eleInput.setIm_Ast_Search(eleInputAsset);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
wdContext.nodeOutput().invalidate();
Please let me know, how to do the same.
Thanks in advance.
Regards,
Palani

Hi David,
I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
Hi Saleem,
When I changed the same, i am getting the Type conflict error,
Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
Please let me know,what can be done in this regard to solve the problem.
My BAPI Structure when imported as model
SearchBAPI
--> ZMM_BAPI_SEARCH_INPUT
> IM_AST_SEARCH(zPTIP_ASSET)
>Zptip_Asset
>Search (Parameter)
> OutPut(ZMM_BAPI_Search_Output)
>IT_Asser_Rec(ZMM_Asset)
>ZMM_Asset
>TXT100 (output Parameter)
--> ZMM_BAPI_SEARACH_OUTPUT
--> ZPTIP_ASSET
>Search (Parameter)
Thanks & Regards,
Palani
Edited by: Palani Appan on Nov 11, 2009 5:31 PM

I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

i am trying to generate purchase order and i create a BAPI also which is active.
But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Hi,
Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
This is my CODE-
FUNCTION ZBAPIPOTV2.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(POHD) TYPE ZPOHD OPTIONAL
*"     VALUE(POITEM) TYPE ZPOITEM OPTIONAL
*" TABLES
*"      RETURN STRUCTURE BAPIRET1 OPTIONAL
data: ls_pohd type bapimepoheader,
         ls_pohdx TYPE bapimepoheaderx,
         lt_poit TYPE TABLE OF bapimepoitem,
         lt_poitx TYPE TABLE OF bapimepoitemx,
         ls_poit TYPE bapimepoitem,
         ls_poitx TYPE bapimepoitemx.
   MOVE-CORRESPONDING pohd to ls_pohd.
   MOVE-CORRESPONDING poitem to ls_poit.
   ls_pohdx-comp_code = 'x'.
   ls_pohdx-doc_type = 'x'.
   ls_pohdx-vendor = 'x'.
   ls_pohdx-purch_org = 'x'.
   ls_pohdx-pur_group = 'x'.
   ls_poit-po_item = '00010'.
   APPEND ls_poit to lt_poit.
   ls_poitx-po_item = '00010'.
   ls_poitx-po_itemx = 'x'.
   ls_poitx-material = 'x'.
   ls_poitx-plant = 'x'.
   ls_poitx-quantity = 'x'.
   APPEND ls_poitx to lt_poitx.
CALL FUNCTION 'BAPI_PO_CREATE1'
   EXPORTING
     POHEADER                     = ls_pohd
    POHEADERX                    = ls_pohdx
*   POADDRVENDOR                 =
*   TESTRUN                      =
*   MEMORY_UNCOMPLETE            =
*   MEMORY_COMPLETE              =
*   POEXPIMPHEADER               =
*   POEXPIMPHEADERX              =
*   VERSIONS                     =
*   NO_MESSAGING                 =
*   NO_MESSAGE_REQ               =
*   NO_AUTHORITY                 =
*   NO_PRICE_FROM_PO             =
*   PARK_COMPLETE                =
*   PARK_UNCOMPLETE              =
* IMPORTING
*   EXPPURCHASEORDER             =
*   EXPHEADER                    =
*   EXPPOEXPIMPHEADER            =
TABLES
    RETURN                       = return
    POITEM                       = lt_poit
    POITEMX                      = lt_poitx
*   POADDRDELIVERY               =
*   POSCHEDULE                   =
*   POSCHEDULEX                  =
*   POACCOUNT                    =
*   POACCOUNTPROFITSEGMENT       =
*   POACCOUNTX                   =
*   POCONDHEADER                 =
*   POCONDHEADERX                =
*   POCOND                       =
*   POCONDX                      =
*   POLIMITS                     =
*   POCONTRACTLIMITS             =
*   POSERVICES                   =
*   POSRVACCESSVALUES            =
*   POSERVICESTEXT               =
*   EXTENSIONIN                  =
*   EXTENSIONOUT                 =
*   POEXPIMPITEM                 =
*   POEXPIMPITEMX                =
*   POTEXTHEADER                 =
*   POTEXTITEM                   =
*   ALLVERSIONS                  =
*   POPARTNER                    =
*   POCOMPONENTS                 =
*   POCOMPONENTSX                =
*   POSHIPPING                   =
*   POSHIPPINGX                  =
*   POSHIPPINGEXP                =
*   SERIALNUMBER                 =
*   SERIALNUMBERX                =
*   INVPLANHEADER                =
*   INVPLANHEADERX               =
*   INVPLANITEM                  =
*   INVPLANITEMX                 =
ENDFUNCTION.
i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

Type conflict when calling a function module (field length)

Dear All,
            I am getting this following error while executing: Type conflict when calling a function module (field length)
This is piece of coding i have writern in my action button.
method SEARCH_MATERIAL .
data:
        node_mat_input TYPE REF TO if_wd_context_node,
        node_mat_output TYPE REF TO if_wd_context_node,
        material TYPE BAPIMATDET-MATERIAL,
        itab TYPE TABLE OF BAPIMATDOA.
node_mat_input = wd_context->get_child_node( 'NODE_MAT_INPUT' ).
node_mat_output = wd_context->get_child_node( 'NODE_MAT_OUTPUT' ).
node_mat_input->get_attribute( EXPORTING name = 'MATERIAL'
                                 IMPORTING value = material ).
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material                    = material
    PLANT                       = plant
    VALUATIONAREA               =
    VALUATIONTYPE               =
    MATERIAL_EVG                =
   IMPORTING
     MATERIAL_GENERAL_DATA       = itab
    RETURN                      =
    MATERIALPLANTDATA           =
    MATERIALVALUATIONDATA       =
node_mat_output->bind_table( itab ).
endmethod.
Attributes are:
Node name = INPUT its structure is BAPIMATDET
INPUT attributes = MATERIAL of type BAPIMATDET-MATERIAL
Thanks,
Gopi.

Hi Amit,
           I have used service call to fetch records from that bapi..
The following is the code generated by service call:-
METHOD execute_bapi_material_get_deta .
declarations for context navigation
DATA:
    node_bapi_material_get_de   TYPE REF TO if_wd_context_node,
     node_exporting   TYPE REF TO if_wd_context_node,
     node_material_general_dat   TYPE REF TO if_wd_context_node,
     node_importing   TYPE REF TO if_wd_context_node,
      lri_element    TYPE REF TO if_wd_context_element.
declarations for fuba parameters
data:
    stru_c_material_general_dat    TYPE if_componentcontroller=>element_material_general_dat.
DATA:
    attr_material    TYPE bapimatdet-material,
    attr_plant    TYPE bapimatall-plant.
get all involved child nodes
node_bapi_material_get_de = wd_context->get_child_node( `BAPI_MATERIAL_GET_DE` ).
node_exporting = node_bapi_material_get_de->get_child_node( `EXPORTING` ).
node_material_general_dat = node_exporting->get_child_node( `MATERIAL_GENERAL_DAT` ).
node_importing = node_bapi_material_get_de->get_child_node( `IMPORTING` ).
get input from context
node_importing->get_attribute(    EXPORTING      name = `MATERIAL`
                                                     IMPORTING      value = attr_material ).
node_importing->get_attribute( EXPORTING       name = `PLANT`
                                                          IMPORTING       value = attr_plant ).
the invocation - errors are always fatal !!!
CALL FUNCTION 'BAPI_MATERIAL_GET_DETAIL'
    EXPORTING
      material =                        attr_material
      plant =                           attr_plant
"      valuationarea =                   wd_This->Valuationarea
"      valuationtype =                   wd_This->Valuationtype
"      material_Evg =                    wd_This->Material_Evg
    IMPORTING
      material_general_data =           stru_c_material_general_dat
"      return =                          wd_This->Return
"      materialplantdata =               wd_This->Materialplantdata
"      materialvaluationdata =           wd_This->Materialvaluationdat
node_material_general_dat->bind_structure( stru_c_material_general_dat[] ).
ENDMETHOD.
                             but the problem is I am getting the following error while compiling...
" stru_c_materialplantdata " is not an internal table - the " OCCOURS n" specification is missing.
Thanks,
Gopi.
Edited by: Yegalaivan on Nov 18, 2009 8:30 AM

TRFC type conflict when calling the function module

Hi,
When I schedule, it is stucking up with TRFC and giving error message in SM58 as" TRFC type conflict when calling the function module" .
even if I execute the trfc LUWs ,load is not successful.
could you please any body suggest for this error.
Thanks
R

Hi Guys,
could any suggest why this is happening.
TRFC is stuck up and giving error message.
Thanks
Ram

How to call a function module from the Web Template?

Hi all,
how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
Many thanks for your hints.
Regards, Nils

Hi!
I am too working on a similar issue.
Probably this helps:
Re: Calling a function module from a Web Template
Regards,
Sri

Can you call a function module from within a smartform?

I was told that yu can not call a function module from a smartform - that does not make sense to me because you can do tons of ABAP within a smartform.
Well - can you?
Thanks.
Scott

Yes, you can call function modules.

How to call a function module from a workflow ? ?

hi all,
i have to call a function module from an workflow, i got a hint from someone that i have to enhance an object and then write and methode, in this methode i can call that function module. I dont know even how to go for it.
Can anyone suggest that how to go for it ?
thanks.
raman khurana.

Hi Raman Khurana,
Please go through the links it might be helpful , notsure
http://help.sap.com/saphelp_nw2004s/helpdata/en/c5/e4af8b453d11d189430000e829fbbd/content.htm
http://www.abapcode.info/2007/07/standard-function-module-text.html
http://it.toolbox.com/wiki/index.php/SAP_Workflow
Regards,
Sreekar.Kadiri.

How to call a function module from debugger?

Hi all,
i just wanted to know whether we can call a function module from a debugger ,
if yes how ?

Hi Laxmikanth,
How ur going to call a function module which is not present in program???
In debugging mode u can change the values of variables,put break points and watch points,but i thnk its not possible to call a function module(not present in program) while debugging .
Please share with us if u have any solution...
Regards,
lakshman.

Calling a function module from a Web Template

Hi,
I need to call a function module from a web template. Any pointers on how i can do this ? Is this even possible ?
Thanks
Shailesh

Hi Rael,
We were finally able to call a FM module from the Web. The trick as Heike suggested was to create an ABAP class which inherits from CL_RSR_WWW_HELP_WINDOW. Then you should modify the process_cmd method of this new class in order to call the FM. Now use this class to create a help service. In case you need to pass any parameters to the FM, you will need to pass them as additional parameters while calling the help service.
An example is below.
CMD=PROCESS_HELP_WINDOW&HELP_SERVICE=ZBOOKMARKING&TEXT=mytext&URL=myurl
Where mytext and myurl were the parameters i pass to my FM and ZBOOKMARKING is my help service.
Thanks a Lot to Heike for his help on this !!
Shailesh

Calling a function module from APO Macro

Hi,
Can I call a function module from a macro directly without going through the user exit? If so, how should I pass the parameters to the function module? I don't have to get the results back to macro.
Regards

Hi Asokan - you can call a function module directly from a macro providing it is designed to be called from a macro. For example if you are in the Macrobuilder and use the menu path Edit -> Edit User Function then you will get a list of existing function modules that you can call directly by inserting a Operator/function into your macro. If you want to call a function module not listed in the User Function drop down list then you will either need the user exit or create a custom function module as a wrapper and register the wrapper function module in the Edit User Function menu path. Calling a function module will always return a value - but you can choose to ignore that value depending on how you build your macro.
Regards
Andy

GetDefinitionByName() error when calling class between modules

i have a main application which loads two modules - lets call them x and y.
module x has a class called dataObject. i have made a dummy instance of this class in module x.
in module y, i have the following code:
flash.utils.getDefinitionByName( 'dataObject' )
the main app loads both module x and y successfully in seperate child domains BEFORE calling the line above.
i am getting a variable 'dataObject' is not defined error.
i know the reason why this error occurs under normal single-app circumstances. however, i could not find any posts relating to this error when dealing with multiple modules loaded dynamically. i have tried loading both modules in the same domain as the main app but still no luck.
any help appreciated!
thanks!

i looked it at a cursory level.
basically, the class that you want the definition for needs to either be in the module app domain loading it or its parent app domain? in my case it is in a seperate child app domain of the parent, which is why it can't be found.. am i right?
however, this forces me to put the module containing the class in the same app domain as the main app. is there a way i can get the definition of the class regardless of what app domain it is in (assuming it is in the same security domain, however) ?
thanks!

Time Constraint Error when calling a Function module from Webdynpro ABAP

Similar Messages

Maybe you are looking for