Time Constraint for Subtype

Dear All,
I have created Customer Infotype 9909 having Five Subtype. Now I have to give Time Constraint to each separate subtype. please guide for the same.
Regards
Mangesh

Dear All,
My created Infotype 9909 having Five Subtype like 1,2,3,4,5 and I have give Time Constraint i.e. 1,2,3 to each separate Subtype. Like same example you will find for Infotype 0006 of Address. For Infotype 0006 the Time Constraint is "T" but there is separate Time Constraint for each subtype of 0006. You will find it in Table T591A. I am sending the following values of Infotype 0006 with its Subtypes having Filed "ZEITB" which shows different Time Constraint for its Subtypes. So like that I want to maintain separate Time Constraint for each Subtype of created Infotype 9909.
MANDT     INFTY     SUBTY     ZEITB     OBJRQ     STEXT
800     6     1     1          Permanent residence
800     6     2     3          Temporary residence
800     6     3     2          Home address
800     6     4     2          Emergency address
800     6     5     2          Mailing address
800     6     6     2          Nursing address
So please let me know the solution.
Reagrds
Mangesh

Similar Messages

  • INFOTYPE 0034 - Time Constraint for Subtypes Issue

    Experts,
    I have an issue, our organisation maintains many subtypes for infogype 0034, and we want to delimit the previous entry regardless the subtype (same problem as yours) and i am not able to make it work the way we want..
    Example :
    employee joins the organisation and has the subtype '07' - home worker- for Infotype 0034 with following dates :
    Start date : 01.01.2010
    End date : 31.12.9999
    now at a later date, the subtype of infotype changes as '09' - factory worker - for infotype 0034 with following dates :
    Start date : 04.05.2010
    End date : 31.12.9999
    now, as we make an entry for subtype '09' with starting date as 04.05.2010 it should delimit the previous entry and the previous entry should have following dates
    Starte date : 01.01.2010
    End date : 03.05.2010
    i have tried changing TC for IT 0034 in V_T582A to 'T' and TCs for subtypes as '1' in V_T591A as i found response for similar to this issue in one of the threads, but it does not resolve my issue
    so, can experts suggest me what shall i do to make the IT 0034 behave in way that whenever there is a new entry for subtype it delimits the old entry (regardless of subtypes)?
    Response will be highly appreciated
    Thanks
    Jalpa

    Hi,
    Please check the threads.
    Re: Subtype wise record delimit for IT-0034 .
    You can also check the user exit.. EXIT_SAPFP50M_002,LXPADU01.
    Thanks & Regards,
    Sandip Biswas.

  • Time Constraints for objects and relationships

    Hi,
    How to set up time constraints for objects and relationships under Org Management?
    Thanks in advance.

    Hi,
    If you need time constraint for subtype A002 then you have to define it over here.
    Usually for all standard objects this table gets populated by SAP. But in case you want something which is not there in this table and is as per the client requirement, you can create.
    regards
    guds

  • T. Code to Check Out Time Constraint for an Infotype

    Is there any central transaction code to check the time constraint for an infotype? What will be its IMG Path?
    Rgds,
    Tapan Shah

    Hello tapan
    go to SM30 -> V_T582A
    it is the table to configure infotypes
    regards

  • Different time constraint for  0081-military service infotype and subty

    Hello
    I need as follows:
    To enable entry for each desired valid Subty.
    To enable ONLY ONE entry for each Subty.
    Time constraint T is not allowed for 0081 so I used
    Time constraint Z and I'm trying to maintain T591A.
    But I don't find the expected entry which offer me to
    define time constraint for each Subty.
    Instead,  I have only the field "ObjId".
    (Are there other IT which behave the same ?)
    Regards
    Zeev Gavish

    hi allan,
    cud u plz help me how to sort out this problem actually in mu company the same scenario is here need to be display pe51 form instead of standard hrforms.....
    plz help me how will i replace this "hrforms with pe51"..

  • No Time constraint for S 1001

    Dear Team,
    When I am trying to create a relationship to Position (S) or (C) Job, receiving a message as "There is no time constraint for S 1001". Unable to locate the exact error location in the customization.
    Could anyone know how to solve this. Not maintained any new objects or relationships.
    Thanks and Regards
    Team Member.

    Hi,
    Should have been standard for Position (S) and Job (C), but check table V_T777ZIT for IT1001 that the time constraint entry exists for the exact relationship you are trying to create.  If it does not exist, you will have to create the time constraint for that object and relationship. 
    IMG:  Personnel Management --> Organizational Management --> Basic Settings --> Data Model Enhancement --> Maintain Infotypes.  Select IT1001 and click on the folder on the left for Time Constraint.   Only one relationship at a time (Position described by one Job) - time constraint = 2.  More than one relationship at a time (Job describes many Positions) - time constraint = 3.
    Paul

  • Change Time Constraint for Personal Data InfoType

    Hi,
    How to change the Time Constraint for Personal Data InfoType.
    I tried to do it in Customisation Procedure --> Infotypes, but the option to change Time Constraint is disabled for Infotype 0002.
    Thanks

    Hi,
    you can change time constraints in general attributes of infotype attributes,this can be done through table maintenace view V_T582A.
    But note that we cannot change the time contraints for mandatory infotyepe of personnel in an organization i.e -0000,0001,0002.
    ex:- without personal details like names no personnel will exist in an organization.
    regards,
    Soori

  • Time Constraint for IT 1007

    Hi all,
    Where can I change the time constraints for IT 1007???
    Thanks
    Amar

    would u please share it with us.....dude...

  • Time constraints for infotype 0185

    Hi experts,
    Need your suggestions,
    Is it possible to change the Time constraints for infotype 0185. What will be the impact if i change from 2 to 3 time constraints. Please explain...
    Shiv.

    hi,
    what i meant was standard time constraints should not be changed unless there is no other option.
    changing the time constraint is a quick fix solution.
    these standard time constraints are set after a lot of thought.
    like he referred 185  which is personnel ids.
    here you can see that it has sub types each sub type can have one record.
    you cannt have two passports .
    you cannot have two pan numbers etc.
    lets us sasy the end user enters some data wrongly and then he realises and creates another record for the same with out deleting the old one.
    the system will take it.
    but as you can see the data is already duplicated and it gives errors if some work flow or some other functionality is written basing on that input.
    regards
    nalla

  • Time constraints for IT0377

    Hello All,
    For the Benefits IT, 0377, we are using a benefit area 08 and subtype 0001.
    For this Benefit Area and Subtype, we have configured several Benefit Plans such as BUPA, CYCL, TRVL etc.
    We want to set the time constraint such that for an employee, multiple benefit plans for the same period can exist (Time Constraint 3), but at the same time, there should be no overlapping record for the same benefit plan.
    for Ex, a BUPA can exist from 01.01.2007 - 01.01.2008 and
    a CYCL could exist from 01.01.2007 - 01.01.2008 <i><b>but</b></i>
    another BUPA with 15.01.2007 - 15.09.2007 should not be allowed. In this case the earlier BUPA should be delimited.
    If I use time constraint 1 or 2  I cannot create multiple benefit plans, as all previous records with the same time range are deleted.
    How can I configure the Infotype such that the above requirement can be fulfilled?
    Thank You,
    Vaishali

    Hi..
    I don't think it can be done, as this as time constraint depends on the startdate and enddate, and it has no connection with the Benifit Plan .

  • Time constraint of Subtype

    Hi
    For the Infotype's Time constraint we can use the table T582A,
    But how to get the Subtype's Time Constraint?
    Thanks & regards
    Manjari

    HI,
    Refer to the link.
    Time Constraint assignement to Subtypes of an infotype.
    Regards
    Sumit Agarwal

  • Time Constraint for Boundary Events

    Hi experts.
    I am pretty new to BPM (NetWeaver Developer Studio 7.1 SP04 BPM SP05) and I am just making a test process to try to get the time constraint concept right. So far I have three tasks in my process, very much like a textbook example. In my first task I have an input field in which you're supposed to type in your name, which is then saved to the context and triggers the second task when completed. That second task is nothing but a screen displaying "You successfully generated a second task, (with the name you entered in the first task here)."
    That works fine so far. Then there's the third task, which is linked to a boundary event on the second event with a start deadline which is critical exception. Here's the idea... You complete the first task (name input), then you fail to start the second task within a certain amount of time defined by an expression, so the process should go to the third task because of the deadline. By the way, it works fine when using a default time, so I must be doing something right so far, the problem is when trying to dynamically change the time with the expression.
    What I tried was to define a context attribute type time and date (I tried both) and assigning a time (current time plus whatever amount of minutes) to that attribute via Java coding at the time you click on the button which completes the task, then use that context element in the expression, but that didn't work. I also tried to make that context attribute an integer and set it to whatever amount of minutes I want to use for the deadline, then in the expression get the current time and add that afore mentioned integer to its minutes. That didn't work either.
    Please help, I have seriously done some research, and no success yet.
    Edited by: david.palafox on Jul 1, 2010 5:54 PM

    Figured it out.

  • Time Constraint for Position A012 Relationship

    Our organization's structure is such that one position may manage more than one organizational unit.  The time contstraint for A012 relationship for positions is currently set to 2, which appears to be restricting me from establishing a position as chief for more than one subordinate org units.  In our test environment I changed the constraint to 3 and now am able to have a position as chief of multiple org units.  Have I created any potential problems (i.e. with workflow) by changing the A012 time contraint?
    Thanks for any advice,
    - Lora

    Not that I am aware of. In the situation of having the time constraint is the when certain program uses evaluation path, it doesn't know which one of the path to pick since there are more than one path presented.
    In the case of workflow, usually it will go to all of them. The first one that open the task owns the task.
    But in the case of A012, it should be okay. There are situation where the chief relationship will be towards more than one organizational unit. Where his position belongs to is a different story. As where his position belongs to for the org unit defines who is his/her reviewer for performance and compensation. But he could have as many A012/B012 to manages all those org units as he wishes.

  • Time constraint for 0002

    hello experts,
    Is it possible,that is if there is any change in 0002,i.e name or any other details,system should also keep the changed data(old) for view purpose??
    client is having one such requirement..
    Do reply..
    thnx in advance

    i would like to share a test Scenario
    say
    Mr. X a male employee was Single this will be maitained in IT0002  martial status
    so when execute various reports for so and so preiod based on the records it will come as Single
    this is correct
    but after some time he gots married so the status got changed to Marr
    than if we take the report we shd get it as Married
    which is true
    but wht in case if the user takes a report from start period to end period
    does the Report shd show two entries  one is for signle and anotehr is for marrried 
    right as per the delimition
    even changeing the existing Record is also not a good option i think so
    Let have a discussion it

  • Time Constraint for IT0001

    Hi,
    I have a doubt regarding TC for Organizational Assignment is '1'.
    TC = '1' means record must have no gaps and no overlaps.
    my question is for example if an employee 'X' joined in 'ABC' company and he get transfered.Then there is a gap between his joining at new location.
    In this case TC = '1' is not satisfying.
    So how can TC '1' has set to Organizational Assignment.
    I hope my question is clear..
    Thanks,
    Anil.G

    For this there are three solutions:
    1. if the Employee is Transfered and he is going to be assigned new number at the new location then final settelment will be done on the date on leaving and new hire action on the date of joining at new place.
    2. If travel action is configured these days comes under travel days and there will be only one record for the given time
    3. If there is no new number and no travel then he will be assigned to the old Org units till the day before his joining onsite and new record is created with new dates with new Org data.
    Regards,
    Satya.

Maybe you are looking for

  • How to send HTML email using alert framework? Kindly help!

    Hi Experts,       I am using alert framework (alert category) to send email. In the email message I want to use HTML content along with some hyperlinks.      How can I do this?      kindly help! Thanks Gopal Message was edited by:         gopalkrishn

  • ShowLocalHelp... map ID??

    In the show local help function where in robohelp can I determine the map ID's of the topics in my help solution?? I would like to open specific topics using this method call however do not know what to pass in for this parameter.. Thanks, Al

  • Overprint / Transparency Question

    Hi, all. I'm working on a logo which will need to be separated for 2-color offset printing.  To produce shading effects, I've created a solid black shape to which I've applied a black/white gradient as an opacity mask.  I've set this piece over an id

  • How do I get rid of two tabs opening when I first open Firefox?

    When I first open Firefox I get my home page in one tab but another tab opens also. That one is set for Facebook. How do I get rid of the automatically opening second tab?

  • Where is my serial number for Photoshop elements I just bought?

    Where is my serisl number for photoshop elements 12 I just bought?