Time constraint of Subtype

Hi
For the Infotype's Time constraint we can use the table T582A,
But how to get the Subtype's Time Constraint?
Thanks & regards
Manjari

HI,
Refer to the link.
Time Constraint assignement to Subtypes of an infotype.
Regards
Sumit Agarwal

Similar Messages

  • Time Constraint for Subtype

    Dear All,
    I have created Customer Infotype 9909 having Five Subtype. Now I have to give Time Constraint to each separate subtype. please guide for the same.
    Regards
    Mangesh

    Dear All,
    My created Infotype 9909 having Five Subtype like 1,2,3,4,5 and I have give Time Constraint i.e. 1,2,3 to each separate Subtype. Like same example you will find for Infotype 0006 of Address. For Infotype 0006 the Time Constraint is "T" but there is separate Time Constraint for each subtype of 0006. You will find it in Table T591A. I am sending the following values of Infotype 0006 with its Subtypes having Filed "ZEITB" which shows different Time Constraint for its Subtypes. So like that I want to maintain separate Time Constraint for each Subtype of created Infotype 9909.
    MANDT     INFTY     SUBTY     ZEITB     OBJRQ     STEXT
    800     6     1     1          Permanent residence
    800     6     2     3          Temporary residence
    800     6     3     2          Home address
    800     6     4     2          Emergency address
    800     6     5     2          Mailing address
    800     6     6     2          Nursing address
    So please let me know the solution.
    Reagrds
    Mangesh

  • INFOTYPE 0034 - Time Constraint for Subtypes Issue

    Experts,
    I have an issue, our organisation maintains many subtypes for infogype 0034, and we want to delimit the previous entry regardless the subtype (same problem as yours) and i am not able to make it work the way we want..
    Example :
    employee joins the organisation and has the subtype '07' - home worker- for Infotype 0034 with following dates :
    Start date : 01.01.2010
    End date : 31.12.9999
    now at a later date, the subtype of infotype changes as '09' - factory worker - for infotype 0034 with following dates :
    Start date : 04.05.2010
    End date : 31.12.9999
    now, as we make an entry for subtype '09' with starting date as 04.05.2010 it should delimit the previous entry and the previous entry should have following dates
    Starte date : 01.01.2010
    End date : 03.05.2010
    i have tried changing TC for IT 0034 in V_T582A to 'T' and TCs for subtypes as '1' in V_T591A as i found response for similar to this issue in one of the threads, but it does not resolve my issue
    so, can experts suggest me what shall i do to make the IT 0034 behave in way that whenever there is a new entry for subtype it delimits the old entry (regardless of subtypes)?
    Response will be highly appreciated
    Thanks
    Jalpa

    Hi,
    Please check the threads.
    Re: Subtype wise record delimit for IT-0034 .
    You can also check the user exit.. EXIT_SAPFP50M_002,LXPADU01.
    Thanks & Regards,
    Sandip Biswas.

  • Time Constraints for objects and relationships

    Hi,
    How to set up time constraints for objects and relationships under Org Management?
    Thanks in advance.

    Hi,
    If you need time constraint for subtype A002 then you have to define it over here.
    Usually for all standard objects this table gets populated by SAP. But in case you want something which is not there in this table and is as per the client requirement, you can create.
    regards
    guds

  • Get time constraint

    Hi
    Is there any function module or anything by which i can get the time constraint of an infotype.
    I have tried RH_PM_GET_TIMECONSTRAINT, but it does not return anything if time constraint of subtype is not in T591a.
    As time constraint of subtypes may be stored in any other table other than T591a, this FM does not work.
    Please help.
    Regards

    Please check below tables
    T591A-- Subtype characteristics
    T512Z --Infotypes 0008/14/15/0276 and 2010 sty are defined here ( wage types) these WTs time constraints are defined in T591B.
    Please check my be useful.
    Thank you,
    NLR

  • Time Constraint assignement to PD infotypes based on Subtypes.

    Hello All,
    Is there a  way to assign Time contraint to PD infotype like 1005 based on Subtypes? If so how can we do this? I tried in table T591A but I guess this table is only for PA infotypes.
    Thanks,
    Chakri.

    Hi,
    Goto to sm30 and give T777I.  There choose your infotype and click the time constraint. You can give the subtype and time constraint.
    Balaji

  • Time constraint of infotype based on subtype

    Hi,
         I have created a master data infotype with different subtypes 0001,0002,0003,0004, etc. I want a time constraint 1 for subtype 0001 and 3 for all other subtypes.
         I would like to know the steps required for configuring the infotypes time constraints based on sub types.
         Kindly help.
    Regards,
    Satish

    Hi Sayantan,
        Thanks.
    Regards,
    Satish

  • Time Constraint assignement to Subtypes of an infotype.

    Hello All,
    Where do we maintain Time constraint assignment to subtypes of an infotype. I am looking to subtypes of IT 0210 ( Tax With holding ) " where do we create the subtypes and their characteristics for this infotype in IMG? I tried in view V_T591A but there is no entry for this 0210 infotype but I can find the time constraint assignment for the rest of the infotypes in this view.
    Thanks,
    Chakri.

    try the following
    SPRO>Personnel Management> Payroll>Payroll:USA>Payroll Results Adjustment-->Define Time Constraints for adjustments
    select infotype 0210 & maintain
    ~Suresh

  • Change time constraint of Infotype 0006 subtype 1 and subtype 2

    Hi
    Can anyone tell me how to change the TC of infotype 0006 subtype 1 and subtype 2.
    Currently I tried to change the TC in table V_T582A but its giving me an error : "Text maintenance not permitted as infotype part of Data Sharing (T582G)  "
    Can anyone please advise.
    Currently the TC is T
    I want to change it to 2.

    hi ,
    you can use SE38 to create a report like :
    to change the time constraint for IT0006 +subty 1 + 2
    REPORT  ZTEST.
    tables: t591a.
    data: wt_tc type table of t591a.
    select * from t591a into table wt_tc where infty = '0006' AND
                                                 ( subty = '1' OR
                                                  subty = '2').
    if sy-subrc = 0.
    loop at wt_tc into t591a.
    t591a-zeitb = 'x'. "new TC that you need
    modify table t591a from t591a.
    endloop.
    endif.
    regards

  • IT2006 Time Constraint with Multiple Subtypes

    My client is utilizing 2 different subtypes in IT2006 for a particular personnel area.  The 2 subtypes are vacation (98) and floating holiday (50).  Since each employee will have 2 IT2006 for the year - one for subtype 50 and one for subtype 98, their configuration was set up to issue a warning message when the second record is entered with the same date parameters.  The problem arises when more than one IT2006 with the same subtype is entered for the same time period - SAP allows you to do this. 
    Is there any way to set up the time constraint on the subtype so that not more than one can be entered for the same time period?  They can change the program to check for the existence of a record for the year, but if there's a way to control this via configuration, please let me know!
    Thank you!

    That is actually set up correctly.  There are 2 types of qabsence quotas, one for vacation and one for holiday.  The reaction cannot be an "E" because then an employee could only have one or the other quota, not both.  Every employee needs to have both.  So the reaction has to stay at a "W" (could also be a "N").  And the subtype constraint needs to stay at a "Z" and not a "T" because checks need to be made with other time infotypes so someone doesnt' try to input 8 hours vacation along with actual working hours.
    It's sounding to me like there are no other configuration areas that will remedy this issue and they'll have to check for the existence of a record in the program.
    Thanks.

  • Time constraints for IT0377

    Hello All,
    For the Benefits IT, 0377, we are using a benefit area 08 and subtype 0001.
    For this Benefit Area and Subtype, we have configured several Benefit Plans such as BUPA, CYCL, TRVL etc.
    We want to set the time constraint such that for an employee, multiple benefit plans for the same period can exist (Time Constraint 3), but at the same time, there should be no overlapping record for the same benefit plan.
    for Ex, a BUPA can exist from 01.01.2007 - 01.01.2008 and
    a CYCL could exist from 01.01.2007 - 01.01.2008 <i><b>but</b></i>
    another BUPA with 15.01.2007 - 15.09.2007 should not be allowed. In this case the earlier BUPA should be delimited.
    If I use time constraint 1 or 2  I cannot create multiple benefit plans, as all previous records with the same time range are deleted.
    How can I configure the Infotype such that the above requirement can be fulfilled?
    Thank You,
    Vaishali

    Hi..
    I don't think it can be done, as this as time constraint depends on the startdate and enddate, and it has no connection with the Benifit Plan .

  • How to make a custom infotype field the time constraint 1?????

    Hello everyone I have this challenging question for gurus to answer it.
    In custom created infotype for OM Ii have that field called ZZJOBID. When infotype was created I assigned the time constraint 1 for that infotype. That time constraint was base on OBJID not on ZZJOBID. Now the problem I am encountering is when I assign the 2nd ZZJOBID  with time span 01011800-12319999 it overwrite the 1st assign ZZJOBID.
    for the requirement reason I have to use PO10( not po03). If I change the time constraint to 3 which let me have the multiple records but I am losing the delimit and other functionality which comes with time constraint 1.

    Suresh,
             you are wright when you say that ' Time Constraint is for the Infotype/Subtype record and cannot be based off a field.' The OM infotype runs on bases of Object such as Organizational Unit, Job, etc... The point I was trying to draw is I am looking for a way that allow me to work via TC PO10 which run on Organizational Unit along with different ZZJOBID (with same begda and endda, if needed).

  • Time Constraints - Hr ABAP

    Hi Everyone
    Can anybody throw some light on the various time constraints used in the HR-ABAP and their relation to the infotypes.
    Also specify if their some Transaction code from where we can get to know about the value's of the time constraints.
    And also if their's any Table associated with them.
    <REMOVED BY MODERATOR>
    Thanks & Regards
    Gaurav
    Edited by: Alvaro Tejada Galindo on Feb 22, 2008 10:24 AM

    Hi,
    Please refer to the document below:
    When you update an infotype, old data is not lost but archived for historical evaluation. The system records a specific period of validity for each infotype, This enables the system to store more than one infotype record at the same time, even if their validity periods overlap. This means that the time relationships between infotype records must be defined. The concept of time constraints enables you to do this.
    HR master data uses the following three time constraints:
    Time Constraint 1
    For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employee’s entry date and the start date of the first record.
    Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
    If a record is delimited because of time constraint 1, the system displays an appropriate message.
    Time Constraint 2
    No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
    If a record is delimited because of time constraint 2, the system displays an appropriate message.
    Time Constraint 3
    Any number of valid records can exist at any one time. The individual records do not conflict with each other.
    The system also contains the following time constraint indicators:
    Time Constraint A
    Infotypes with time constraint A must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
    Infotype records with time constraint A cannot be deleted.
    Time Constraint B
    Infotypes with time constraint B must have no more than one record. The system automatically assigns the record a validity period from January 01, 1800 through December 31, 9999. This validity period cannot be subdivided.
    Infotype records with time constraint B can be deleted.
    Time Constraint T
    Infotype records with time constraint T depend on the subtype.
    The principles of data entry and time constraints that apply to infotypes ensure that data is consistent and accurate. They also constitute the basis of time recording, payroll accounting, and reporting.
    Thanks,
    Sriram Ponna.

  • Time constraint of time Infotype 2006

    Hi all,
    I have a requirement wherein In IT2006 same record should not be created on the same date. For eg. if I create a record in IT2006 for its subtype "Leave Encashable" on 01.04.2014 and again I am creating it on 01.04.2014, It is not restricting me to do so. It is accepting and creating the same record.
    I checked the settings in table V_t544y and V_544y_b, but I am not able to find out where actually I need to make changes.
    Looking forward for a reply.
    Tnx
    Megha

    Check in table V_T582A. Currently it might be maintained as Z. See the below options:
    1
    Record must have no gaps, no overlappings                  
    2
    Record may include gaps, no overlappings                   
    3
    Record may include gaps, can exist more than once          
    A
    Infotype exists just once from Jan.1 1800 to Dec.12 9999   
    B
    IT exists for maximum of once from Jan.1 1800 to Dec.12 9999
    T
    Time constraint is based on subtype or subtype table       
    Z
    Time constraint for time management infotypes -> T554Y     
    But this is SAP Standard Infotype, and making any changes in Standard Infotype is not advisable.
    Thanks and Regards,
    Bhagyashree

  • Time Constraint Classes.

    Hi All,
    Pls let me know the concepts for Time Constraints classes.
    Regards
    Rajesh

    A time constraint indicates whether more than one infotype record may be
    available at one time. The following time constraint indicators are
    permissible:
         -   1: An infotype record must be available at all times. This
             record may have no time gaps. You may not delete the record last
             stored on the database because all records of this infotype
             would otherwise be deleted.
         -   2: Only one record may be available at one time, but time gaps
             are permitted.
         -   3: Any number of records may be valid at one time, and time gaps
             are permitted.
    Other possible time constraint indicators are as follows:
         -   A: Only one record may ever exist for this infotype. It is valid
             from 01/01/1800 to 12/31/9999. Splitting is not permissible.
             View V_T582B Infotypes Which are Created Automically controls
             whether the system automatically creates the infotype record for
             an employee hiring or an applicant data entry action.
             Infotypes with time constraint A may not be deleted.
         -   B: Only one record may ever exist for this infotype. It is valid
             from 01/01/1800 to 12/31/9999. Splitting is not permissible.
             Infotypes with time constraint B may be deleted.
         -   T: The time constraint varies depending on the subtype.
         -   Z: Refers to time management infotypes. The time constraint for
             these infotypes depends on the time constraint class defined in
             view V_T554S_I Absence: General Control. Collision checks are
             defined in view V_T554Y  Time Constraint Reaction.
    Regards
    ...Sadhu

Maybe you are looking for