Time Constraint: Record exists at least once from minumum to maximum

Can anyone explain to me what this means?
To me it implies that you should have at least one entry, however, I cannot add multiple entries for the same BP for any other time interval.
Many thanks
David

David
The many-to-many only applies for different targets, not for the same sources/targets. Since some sites do not support the time-dependent relationships, they only determine the active relationship between two partners and use this in communication. If there would now exist overlapping timeframes (the reason for your error), the system is not able to identify the one relationship that it should update if changes come from these site types; for the other direction then duplicate more or less identical relationships would be generated. To prevent this problem it is allowed to have at any given time only one relationship of one type active between two objects, regardless whether time limitations are customized for this relationship or not.
Regards, Kai

Similar Messages

Will my files i saved using time machine still exist if i delete from my computers hard drive?

I recently had a problem with my computer. I bought an external hard drive and used time machine to back up my 15in mac book pro before sending in for repair.
I have gotten my computer back and needed to delete files from the hard drive on the computer ( close to capacity). Was I safe to do so knowing that everything is saved on my external?
My concern is that if I plug in the external hard drive it will now see those files have been deleted from my computer and delete from the external as well.
-David

Just wanted to add to this conversation - Time Machine will keep copies of your files for some time. It is a backup system, after all. Deleting the files from your main hard drive will not cause Time Machine to go and delete them from your backups.
However, eventually, Time Machine is likely to run out of space on your hard drive, and it then does some cleaning up so it can continue working. A file that is not on your hard drive will not exist on your Time Machine backup forever. Eventually it will be deleted to make room for more recent backups. I can't predict how long this will take, but if you have bought a 1TB or so drive for your Time Machine backups, I would suggest that you might be able to keep some months of backups online - after that, old files that you no longer have on your Macbook Pro will be cleaned away.
So Glenn is spot on - if you want an archive copy of those files, you should make a separate backup - Time Machine does not keep your files forever!
Hope that helps.
Ivan

Time Constraints in HR Master Data

Hi
Can you please explain scenarios where Time Constraint 0 is used.
thanks
AP

Actually time constraint 0 exists.
It is "may only exist once".
Example:
IT0008 with time constraint 0.
The results will be a permanent record. Because it can exist only one and once. So, you cannot delimit, you cannot gap, you cannot duplicate.
Hope that explains.
Márcio Leoni
Edited by: Márcio Leoni on May 7, 2008 10:28 AM

No Time constraint for S 1001

Dear Team,
When I am trying to create a relationship to Position (S) or (C) Job, receiving a message as "There is no time constraint for S 1001". Unable to locate the exact error location in the customization.
Could anyone know how to solve this. Not maintained any new objects or relationships.
Thanks and Regards
Team Member.

Hi,
Should have been standard for Position (S) and Job (C), but check table V_T777ZIT for IT1001 that the time constraint entry exists for the exact relationship you are trying to create. If it does not exist, you will have to create the time constraint for that object and relationship.
IMG: Personnel Management --> Organizational Management --> Basic Settings --> Data Model Enhancement --> Maintain Infotypes. Select IT1001 and click on the folder on the left for Time Constraint. Only one relationship at a time (Position described by one Job) - time constraint = 2. More than one relationship at a time (Job describes many Positions) - time constraint = 3.
Paul

Time doesn't update periodically, links don't open in emails, turning off and on at least once a day...any ideas why???

I'm having to turn off and on my iPhone at least once a day to update time, and/or to receive texts that are not coming through when they should've gone through. Also, why don't the links open when i click on them from my email? Also, phone has to reconnect to wifi every time I unlock it. Any recommendations???

First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
This is something that often cures strange problems like yours. I hope it works for you.

Time Capsule flashes amber and loses connection at least once a day

Hello,
I got my Time Capsule a month ago. I had an old one from 2008 which I gave to a friend, so it was time to upgrade. I have no idea what's going on, but the Time Capsule flashes amber and I lose my Internet connection at least once a day, sometimes two or three times within a few hours.
Is anyone else experiencing this? Any idea how to fix it?
If it matters, I'm on a mid-2010 MBP running OS X 10.8.5.
Thanks!

You and everyone else.
https://discussions.apple.com/thread/5140686?tstart=0
It is not stable firmware.. or has issues .. with some modems.. or is just faulty.. pick one or two choices.
There is no fix because this is really a bug.

How to find if certain record exists from stored procedure

Hello
I am not an expert in this and am trying simple thing. I want to find if certain record exists in a table and if so set some boolean variable.
create or replace procedure findit(param)
AS
return_group boolean;
BEGIN
myflag := false;
--here goes my question
-- say I have SELECT WHATEVER FROM TABLE WHERE BLA = param
--if it returns at least one record set myflag to true;
END;Any idea?

THanks Satyaki_De,
However, when I put simple SELECT statement in the body of my procedure it does not compile. Actually I should have said that before. So here is my code and where it breaks:
create or replace procedure close_subjects(study_id varchar2)
AS
return_group boolean;
BEGIN
dbms_output.enable(1000000);
FOR current_group IN(
   SELECT DISTINCT group_id from groups WHERE study_id=study_id
) LOOP
   FOR current_subject IN(
      SELECT individual_id from groups WHERE group_id=current_group.group_id AND study_id=study_id
   ) LOOP
      return_group := true;
      SELECT INDIVIDUAL_ID FROM ASSIGN WHERE DATE_TIME_ASSIGNED = ( SELECT MAX(DATE_TIME_ASSIGNED) FROM ASSIGN WHERE INDIVIDUAL_ID = current_subject.individual_id ) AND                            ASSIGN_STATUS_ID = 'A';
     IF SQL%RowCount = 0 THEN
       return_group := false;
         dbms_output.put_line(current_subject.individual_id);
      END IF;
   END LOOP;
END LOOP;
END;
/If I comment out SELECT statement and leave dbms_output for testing purposes it works well. As I said I am faaaar from expert and seems to me that I cannot have SELECT in procedure BODY?

Time Constraints on ESS - Record Working Time and Leave Request

Hi All,
I have configured Time Constraints and their reaction in V_T554Y.
When I record the appropriate combination of Attendances and Absences in back-end, I can see the reactions as specified... However, when I try to do the same in ESS - Recording Working Time and Leave Request, I do not see that Time Constraints taking effect on the front end.
Here is what I have done:
I have two attendance - P001 and P002. P001 is configured to be recorded on Leave Request where as P002 is configured to be recorded via Record Working Time (CATS) link.
I record the attendance P001 in Leave Request and also post that into infotypes. After this, I try to record P002 in the Record Working Time Screen and I still get errors (Errors are from: HRTIM00REC E/207 and LR E/335)
If I try to replicate the same in the back-end in IT20002, then there is no issues.
Can anyone help and let me know how we can implement the same Time constraints reactions on the front-end and the back-end.
Thanks a bunch
- Harshal

Note that Time constraints are not valid for Leave request and Working time ie in ESS
it only comes via PA30
in CATS too, we dont follow much HR related collisions checks these are taken into consideration during CAT6
and in leave request via Rptarqpost
so its not gonna work, Its intended and correct! go for a user exit cats0003 or check cac1 profile customisation

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

My wifi goes down at least once a day and I have to unplug the time capsule and reboot it and then it works fine. Any idea why this is happening/what I can do to fix it?

I was having this problem while still using Mavericks -- it started after a Mavericks update last spring. During the initial Yosemite beta runs over the summer, it seemed to be fixed, but after the official launch in October, I had all sorts of problems keeping connected. Its gotten a little better, but still happens to at least one of my devices every day. Weird that we still cannot figure out why the connection keeps dropping on some devices, but not others, and then the next day, one of the devices that didn't disconnect the previous day will disconnect, but the ones that did disconnect, stay connected. It's just sloppy, poorly written software for technology that isn't working the way it should. If you turn off Continuity and Handoff on all your devices, you will probably see that everything stays connected. With those turned off on all devices, TC stayed connected to everything for over a month. The day I turned Continuity back on, all the problems started again. It had something to do with the bluetooth version being used, the wifi routine, and Apple's AirPlay technology not quite getting along with each other.

How do i change the time line in Au from time since recording start to the actual time?

how do i change the time line in Au from time since recording start to the actual time? I have a recording that was started at 10:00 but obviously in Au it starts at 0:0:00. Basically i want to time shift this to 10:00:00

In the Properties panel, modify the Start Time parameter.

Error-u201CNo customer master record exists with sold to partyu201D. from Webshop

Hi,
We are trying to create an order from webshop calling BAPI_SALESORDER_CREATEFROMDAT2, while saving the order we are getting an error that "No customer master record exists with sold to party".
When we try to execute the same with stanalone program from Java the output is coming fine.
If anyone worked on similar issue, kindly let me know.
-Thanks

Hello Mark,
Yes, Master data is available in both systems. Configuration is also fine.
Thanks,
Satish.

Time Constraint Error when calling a Function module from Webdynpro ABAP

Any help will be greatly appreciated - Thanks RM
Time Constraint Error
Information on where terminated
    Termination occurred in the ABAP program "SAPUP50R" - in
     "CHECK_TIME_CONSTRAINT_S1".
    The main program was "MP000000 ".
    In the source code you have the termination point in line 1069
    of the (Include) program "UP50RU01".
Error occurred during batch input processing
Source Code Extract
      l_is_inconsistent = 'X'.
    ENDIF.
Check if there are inverted time periods.
    IF l_prelp_line-begda > l_prelp_line-endda.
      l_is_inconsistent = 'X'.
    ENDIF.
Check if there are overlaps or gaps.
    IF NOT l_prelp_before IS INITIAL.
      l_date_difference = l_prelp_line-begda - l_prelp_before-endda.
      IF l_date_difference <> 1.
        l_is_inconsistent = 'X'.
      ENDIF.
    ENDIF.
    l_prelp_before = l_prelp_line.
ENDLOOP.
IF l_prelp_before-endda <> '99991231'.
    l_is_inconsistent = 'X'.
ENDIF.
IF l_is_inconsistent = 'X'.
    IF p_access_type = 'R'.
490 Datenbankschiefstand Personalnummer & Infotyp &
      MESSAGE x490 WITH l_prelp_before-pernr l_prelp_before-infty.
    ELSE.
491 Unzulässige Daten Personalnummer & Infotyp &
Line 1069 Error occcurs >>>> MESSAGE x491 WITH l_prelp_before-pernr l_prelp_before-infty.
    ENDIF.
ENDIF.
ENDFORM.                    " CHECK_TIME_CONSTRAINT_S1     "XYVN0352581
*&      Form clear_no_adapter_needed              new     "XREN844998
      text
FORM clear_no_adapter_needed .
CLEAR no_adapter_needed.
ENDFORM.                    " clear_no_adapter_needed
*&      Form set_no_adapter_needed              new     "XREN844998
      text
FORM set_no_adapter_needed .
no_adapter_needed = 'X'.
ENDFORM.                    " clear_no_adapter_needed

Hi,
Well, are you trying to do a batch input on infotype 0000? If yes you need to check that the proposed values respects the time constraint, meaning no gap, no overlaps and no inversions. Also fields SUBTY, OBJPS, SPRPS and SEQNR must remain initial when processing IT0000...
Kr,
Manu.

Error in BAPI_PO_CHANGE - No info record exists from material and vendor

Hi,
I am using BAPI_PO_CHANGE for performing material exchange in a PO.
While the new exchanged material do not have any info record for the vendor, the BAPI is throwing an error " No info record exists for material ABC and vendor ABC."
The funny thing is the bapi return Error message shows the vendor number and material number same. Infact the material is A and vendor is B.
We will not maintain any info records and hence the BAPI should not ask us to maintain any info record.
Also I want to mention that Material exchange is working fine in ME22N but BAPI is throwing the error. The above error is a warning message in ME22N but a hard error in BAPI.
Anyone having any idea? Please help.
<promise removed by moderator>
Thanks in advance.
Aafaque Husain
Edited by: Thomas Zloch on Mar 10, 2011 3:49 PM

The error and the same values would seem to indicate an error in the input to the BAPI...

Time constraint of time Infotype 2006

Hi all,
I have a requirement wherein In IT2006 same record should not be created on the same date. For eg. if I create a record in IT2006 for its subtype "Leave Encashable" on 01.04.2014 and again I am creating it on 01.04.2014, It is not restricting me to do so. It is accepting and creating the same record.
I checked the settings in table V_t544y and V_544y_b, but I am not able to find out where actually I need to make changes.
Looking forward for a reply.
Tnx
Megha

Check in table V_T582A. Currently it might be maintained as Z. See the below options:
1
Record must have no gaps, no overlappings
2
Record may include gaps, no overlappings
3
Record may include gaps, can exist more than once
A
Infotype exists just once from Jan.1 1800 to Dec.12 9999
B
IT exists for maximum of once from Jan.1 1800 to Dec.12 9999
T
Time constraint is based on subtype or subtype table
Z
Time constraint for time management infotypes -> T554Y
But this is SAP Standard Infotype, and making any changes in Standard Infotype is not advisable.
Thanks and Regards,
Bhagyashree

Time Constraint Class

What is the number (0 to 7) stands for time constraint class in absence for the screen number 2001. I have a leave type CL (causual leave). What time constraint class shall i assign to it.
Regards,
Chinmay

for ur info alreadt raghu has given the answer any way check this tooo
A: Only one record may ever exist for the infotype (from 01/01/1800 - to 31/12/9999). Infotypes with time constraint A may not be deleted.
B: Only one record may ever exist for the infotype (from 01/01/1800 - to 31/12/9999). Infotypes with time constraint B may be deleted.
T: Time constraint varies depending on subtype.
Z : Refers to time management infotypes.Time constraint for these ITs depend on time constraint class in table V_T554S_I. Collision checks : V_T554Y
Apart from 1, 2, 3 there are some other types of Time Constraints: A, B, T, Z.
The Infotypes with TC type A must exist, must have only one record in its lifetime, and these ITs cannot be deleted.
Example: IT0003 (Payroll Status)
The Infotypes with TC type B must have only one record in its lifetime.
Example: IT0031 (Reference Personnel numbers)
The Infotypes with TC type T will have subtypes, and the TC is based on the subtype.
Example: IT0009 (Bank Details)
The Time Mnagegement Infotypes will have TC type Z .
Example: IT2001 (Absences)
rule that determines whether collisions in time data are allowed, and if so, specifies how the system reacts to such collisions.
Time contraints comprise the following:
Time constraint classes that determine which collisions in time data records are allowed
Time constraint table that contains the time-based collisions allowed in the time data records
Time constraint indicator that displays whether a new data record that collides with an existing time data record can be transferred to the system or whether the transfer is prohibited
When you update an infotype, old data is not lost but archived for historical evaluation. The system records a specific period of validity for each infotype, This enables the system to store more than one infotype record at the same time, even if their validity periods overlap. This means that the time relationships between infotype records must be defined. The concept of time constraints enables you to do this.
HR master data uses the following three time constraints:
Time Constraint 1
For the entire time that the employee works at the enterprise, exactly one valid infotype record must exist. The validity periods of the individual records must not overlap. If a new record is created, the system automatically uses the start date of the new record as the delimitation date of the old record. Gaps are only allowed between the employeeu2019s entry date and the start date of the first record.
Time constraint 1 must be used for all of the infotypes containing information that must be available at all times. This is particularly true of personal and organizational assignment data.
If a record is delimited because of time constraint 1, the system displays an appropriate message.
Time Constraint 2
No more than one valid record can exist at any one time. Records with constraint 2 must not overlap. Their existence is not obligatory. If a new record is created, the system automatically delimits the previous record, if one exists.
If a record is delimited because of time constraint 2, the system displays an appropriate message.
Time Constraint 3
Any number of valid records can exist at any one time. The individual records do not conflict with each other.
Time Constraints:
When an info type is updated, the old data is not lost. Instead, it remains in the system so that you can perform historical evaluations. Each info type is stored with a specific validity period. This means that the system can contain more than one record of the same info type at the sometime, even if their validity periods coincide.
If you enter and save new information in an info type, the system checks whether the record already exists for this info type. If this is the case, the system reacts based on rules or TIME CONSTRAINTS set up for that particular info type or subtype.
Time Constraint 1: This is mandatory information that must be uniquely available, gaps are not allowed
Time Constraint 2: This is optional information that, if available, must be unique, gaps allowed.
Time Constraint 3: This is optional information that, if available, can exist more than once.

Time Constraint: Record exists at least once from minumum to maximum

Similar Messages

Maybe you are looking for