Time countdown on Ipod not correct?

I was listening to "One More Drinkin' Song" By Jerrod Niemann that I downloaded from Itunes a while back and noticed that the time between seconds in the countdown from beginning to end of the song are not consistant and sometimes it even jupm 2 seconds. I am guessing that when it jumps 2 seconds it is making up for the other non consistant counts.
Just to be clear, the song is not skipping, just the time countdown is not doing exactly what it should.
Is this a common issue or is there something wrong with my Ipod?
I have had the Ipod for around 6 Months and have not noticed this before, but I was not really looking for it before. It was by accident that I noticed it this time. So it may have been happening all along.
Edit: I am now aware after looking at how other songs countdown, that it is not an isolated problem with this one song.
Edited to provide more information

Has anybody else had any experience with a problem like this or does anybody have a possible solution for this problem?

Similar Messages

My Time capsule location is not correct. It thinks it is in Alabama.

My Time Capsule location is not correct. It thinks it is in Alabama. It is in Tennessee.

Was the Time Capsule or your Mac ever located in Alabama?
Where are your ISP offices located?
Have you tried resetting the Time Capsule back to factory default settings and then setting it up again? If yes, it may take Apple's location services servers 4-6 weeks to pick up the new location.

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

Ipod not correctly measuring distance

About 3 weeks ago I began having a problem with the Nike+ system not correctly logging my milage. I typically run about 7:40 mile, but recently it has been clocking my runs between 10 & 12 minute miles. I went to a track near my house to calibrate the system. I set it to 1/2 mile, and ran 2 laps on the regulation size track. When I completed the half mile calibration the sensor had only registered .3 miles.
Has anybody else run into this issue? The system worked great for about the first 175 miles that I've had it. The last 30 miles it has been very sporatic. I'm getting very frustated since, like a lot of you, spent extra $ to get shoes, and Ipod, and the sensor.
Any help?

If these are your symptoms:
- Recorded pace and distance within reasonable accuracy for first ~150 miles, or ~26 hours of use
- Pacing and distance became more and more erratic, usually recording runs that are progressively shorter and slower than your normal pace.
- no battery low indicator on iPod
Then it is probably time to get a new sensor. Either the battery is low, notwithstanding the lack of battery low indicator, or it has gotten beat up by the miles you've put on it.
I went ahead and bought a new kit - $29 :-\ and did some test runs with the new sensor. I was able to get consistent readings on my pace and distance, whether walking or running. I did a calibration and a short run, and it brought the accuracy back in.
Suggestion to Apple and Nike (as if they actually read this): in addition to selling the sensor from the Apple store, start putting replacement sensors in the brick & mortar stores, maybe even in packs of two. btw - $19 seems a little steep for just the sensor. And now that I had to buy a whole new pack, I don't know what I'm going to do with the extra receiver.
Ryan: I don't know what to tell you, except to make sure you follow the other suggestions on this site (making sure the sensor is right-side up and tied down so it doesn't move) or just exchange your kit for a new one and see if that helps.

Update time capsule, since ipod not connect wifi to time capsule

Hello,
Since I update my Time Capsule(7.5.1), I cannont connect my ipod touch to wifi time Capsule.
message ipod is : impossible de rejoindre le réseau RES_Didier
My iMac is connected, my PC Windows is connected ans my Apple TV to.
Only my ipod cannot connect.
But, if i connect my ipod to an other wifi network it is ok.
That is only with my time capsule that I cannot connect wifi!!
Do you know why ? can you help me ? (sorry my english is not very good)
Thanks
Didier

Did you upgrade install Mavericks? I think this can lead to all kinds of issues.. clean install the OS is the only way.
Do a full factory reset of the TC..
Use all SMB names.. that is short, no spaces and pure alphanumeric.
I strongly recommend when you have trouble.. even different names for 2.4ghz and 5ghz. So you can keep track of where the issue is.
Also use ethernet.. if you have not got ethernet port, buy a Thunderbolt to ethernet (much the preferred) or USB to ethernet.. if thunderbolt is missing or used.
Open network utility on your computer and find the listing for the TC.
ie scan via netstat.
Make sure you have ipv6 turned on to link local.. this is now essential.
Use the IP address if it is static rather than name.. and try it in full network isolation by ethernet.
So Go .. Connect to server.
AFP://10.0.1.1 (at default IP)
The default password is public.. you will need to type in a password.
If it fails the TC could be faulty.
Use ping via the terminal to make sure the network is working.

Why the time and date is not correct when I save a waveform in txt format, using Labview 6.1?

I am using Labview 6.1 and my operation system is Windows 98. The date/time properties is configured in the Windows (time and date in the control panel is correct). I generated a waveform using Basic Function Generator.vi and saved this using the Export Waveforms to Spreadsheet File.vi. When I opened this file the date and time was wrong. Only the delta t was correct and it did not show the date neither the time, only a float number. How can I adjust the correct time?

Actually, the date/time is correct, it is expressed as seconds since January 01, 1904.
In order to print the string version of the date/time from your file, you will need to write a utility that converts the date/time to a string or series of strings in whatever format you wish. This can be done by reading the first line (I assume that is the line with the time on it), formatting the date/time into a string, and writing over this information in the file.
The waveform VIs were meant to be used internally to read and write waveform data. Any use beyond that should require you to add formatting and other information/data as necessary.

Why is the time bar in Calendar not corrected for DST?

My iPad has corrected its clock for DST, but the time bar in Calendar is still an hour out. Any ideas?

Mine is correct in the Eastern time zone, US. Have you tried any of the basic stuff? Restart, quit the app, reset the iPad?
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the calendar app and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

Time display on T400 not correct??

Sometimes when I log into my computer the time is not right, I have to always change it.

Has anybody else had any experience with a problem like this or does anybody have a possible solution for this problem?

The time of event is not correct

on icloud.com event 1:00 h give on iphone 10:00.
Thank's to answer when possible in french.

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If not then your current library is damaged.
If that's the case make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your Home/Library/Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Click to view full size
OT

Time on videos is not correct

anyone know how to fix?

I just noticed this same problem. The time on the recorded videos is ahead by an hour. Is this a Verizon fix or a user fix?

Time and Date not correct

Hi to all.
Does anybody know how to save your cmos settings to a floppy or CD?
Is there a program that can assist with saving the cmos settings to floppy or CD?
Is there anyway to perform saving the cmos settings within the BIOS to floppy or CD?
I really don't want to go into the BIOS and write down all that info.
I have an HP Pavilion 553w that is 7 1/2 years old, running windows xp home edition version 2002 sp3, 2 gbs of ram, AMD athlon(tm)XP 2100+ 1.73 GHZ, bios version/date Phoenix Techologies, LTD AM35308, 10/07/2002 (Phoenix-AwardBIOS CMOS Setup Utility) SMBIOS 2.3, BIOS Core Version V6.0, BIOS Revision 3.08 10/7/2002.
I know my computer is ancient and I probably should have updated my BIOS, as it is out of date.
Also, after starting up my computer I noticed my time and date is not correct and as of lately have to adjust the time and date to the correct time and date.
I did some research and came across some possible reasons:
1. RTC battery (CMOS battery) may need reseating on motherboard.
2. The battery has become corrupt.
3. BIOS version may be out of date.
My computer is really taking longer than usual to startup and images of icons take longer to display, which may be a sign of the symptoms I listed above.
My computer doesn't have any malware whatsoever, clean as can be.
Any help or advise will be truly appreciated.
Jboman
This question was solved.
View Solution.

Jboman,
There is not need to save CMOS settings unless you changed the default BIOS settings. A bad CMOS battery will not preserve the settings.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

TS1398 tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help

tonight i have upgraded my Ipad2 to ios 6 by it's own wifi,after compete downloading and installation the wifi password is not accepted by ipad2,i have tested so many times and i entered password correctly.please help

are other things still connecting to the wifi without a problem?
Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

Ipod Classic artwork not correct

i have restored my ipod classic 3x and the artwork is still not correct on several songs even though the artwork is correct in itunes? any suggestions?

Although you did a Restore, there may be a cached version of the iPod's artwork database in iTunes (on the computer). You should try removing those songs (with the artwork problem) from the iPod, use the iPod to confirm they are gone, then sync those songs back to the iPod. Hopefully, the artwork will be corrected this time.
If that is a problem, because your sync setting is to sync the entire iTunes music library, please post back.

Time From field is not getting displayed in correct format in Activities

Hello Experts ,
We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
Can any one suggest how to display in correct format ?
Regards
Vinayak

Hi,
Its an SAP Product error.
Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
- Bobby

Ipod Touch Stuck On iTunes Screen. The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.

I got a new ipod touch for Christmas.
Today I was going to put music on it, i was told there was updates.
So I went ahead to do them.
My Ipod is stuck on the screen with the usb cord pointing to the itunes logo.
In Itunes i'm told :
Itunes has dected an ipod in recovery mode. You must restore this ipod before it can be used with itunes.
Turning the ipod off - the same screen appears when it's back on.
When I click restore ipod and after restore and update is clicked ; Extracting software loads up at the top.
When its done this is the message I get:
The iPod 'iPod' cannot be restored at this time because the ipod software update server could not be contacted or is temporarily unavailable.
I've been looking up trying to figure it out myself and have read making sure a setting in Lan Settings in Internet Properties has ; Automatically detect settings checked. I still get the same ipod message.
I've tried holding the power and home key to turn it off, then powering it back on. But that doesn't work.
I installed itunes today, so its up to date - I checked.
I don't know what else to do.
Can someone help me out, please? :}
The operating system was ios 5 something? It wanted to update to 6 i believe.

I've tried the top part but now that i've looked to the bottom:
Additional Information
The “hosts” file may also be blocking gs.apple.com.
Select the hosts file (normally you can find your hosts file at C:\WINDOWS\SYSTEM32\DRIVERS\ETC).
I put this in the url bar?
When it gives me the list of names, im not sure what to do from there. The steps aren't that clear for me.

Time countdown on Ipod not correct?

Similar Messages

Maybe you are looking for