TIME DATA IN vl06g

i have an issue with the time data which is always defaulting whenever we use the transactions like example VL06G its defaulting the time data range between today and a week from now...can anyone help where this config is done not to populate any dates in this so that the user will specify what date ranges he wants to select
Thanks

Hello Srisha,
I think it may be defaulted in the program itself. first date is system defaul date and second date is +7 days.
The option is click on that date field and delete the line (Shift + F2).
Hope this helps.
Regards
Arif Mansuri

Similar Messages

  • Windows server 2008 R2 Standard edition time server problem: The computer did not resync because no time data was available.

    Hello,
    I'm trying to get my 2008 R2 server (physical server) to synch with an external time server. I've read other threads on the topic but have not found a solution. I'm sure i'm missing something.
    First the step leading to the error:
    w32tm /resync /rediscover
    Sending resync command to local computer
    The computer did not resync because no time data was available.
    Following is the history: 
    Here are the steps
    C:\>netdom /query fsmo
    Schema master               DC-01.coastal.local
    Domain naming master        DC-01.coastal.local
    PDC                         DC-01.coastal.local
    RID pool manager            DC-01.coastal.local
    Infrastructure master       DC-01.coastal.local
    The command completed successfully.
    next: 
    w32tm /config /manualpeerlist:time.nist.gov,0x1 /syncfromflags:manual /reliable:yes /update
    The command completed successfully.
    next:
    net stop w32time && net start w32time
    The Windows Time service is stopping.
    The Windows Time service was stopped successfully.
    The Windows Time service is starting.
    The Windows Time service was started successfully.
    Next:
    w32tm /resync /rediscover
    Sending resync command to local computer
    The computer did not resync because no time data was available.
    Next:
    Did a restart of the server and repeated:
    w32tm /resync /rediscover
    Sending resync command to local computer
    The computer did not resync because no time data was available.
    Next:
    Ran the following:
    w32tm /query /configuration
    C:\>w32tm /query /configuration
    [Configuration]
    EventLogFlags: 2 (Policy)
    AnnounceFlags: 10 (Policy)
    TimeJumpAuditOffset: 28800 (Local)
    MinPollInterval: 6 (Policy)
    MaxPollInterval: 10 (Policy)
    MaxNegPhaseCorrection: 172800 (Policy)
    MaxPosPhaseCorrection: 172800 (Policy)
    MaxAllowedPhaseOffset: 300 (Policy)
    FrequencyCorrectRate: 4 (Policy)
    PollAdjustFactor: 5 (Policy)
    LargePhaseOffset: 50000000 (Policy)
    SpikeWatchPeriod: 900 (Policy)
    LocalClockDispersion: 10 (Policy)
    HoldPeriod: 5 (Policy)
    PhaseCorrectRate: 1 (Policy)
    UpdateInterval: 100 (Policy)
    [TimeProviders]
    NtpClient (Local)
    DllName: C:\Windows\system32\w32time.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    CrossSiteSyncFlags: 2 (Policy)
    AllowNonstandardModeCombinations: 1 (Local)
    ResolvePeerBackoffMinutes: 15 (Policy)
    ResolvePeerBackoffMaxTimes: 7 (Policy)
    CompatibilityFlags: 2147483648 (Local)
    EventLogFlags: 0 (Policy)
    LargeSampleSkew: 3 (Local)
    SpecialPollInterval: 3600 (Policy)
    Type: NT5DS (Policy)
    NtpServer (Local)
    DllName: C:\Windows\system32\w32time.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 0 (Local)
    AllowNonstandardModeCombinations: 1 (Local)
    VMICTimeProvider (Local)
    DllName: C:\Windows\System32\vmictimeprovider.dll (Local)
    Enabled: 1 (Local)
    InputProvider: 1 (Local)
    Any feedback/guidance appreciated!!

    Hi,
    You may need to update command w32tm /config /syncfromflags:domhier /update, to change the IntranetServer w32time type to nt5ds (this sets the service to pull from the AD).
    For more detailed information, please refer to the thread below:
    The computer did not resync because no time data was available (w32tm)
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/127e7fe7-6fff-469d-8536-8da1c9825cb0/the-computer-did-not-resync-because-no-time-data-was-available-w32tm
    You could refer to the article below to configure time in Active Directory:
    “It’s Simple!” – Time Configuration in Active Directory
    http://blogs.technet.com/b/nepapfe/archive/2013/03/01/it-s-simple-time-configuration-in-active-directory.aspx
    Regards,
    Mandy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Display real time data on a plot in a sub VI and main VI

    I am building a program to measure and plot real time data. Program has several steps so I build few Sub VIs to make it simple. My problem is I am plotting real time data in my SUB VI(it works fine), but in my main program when I try to get the same plot its not real time data plot. Plots appear at the end of the program.  All tips and help would be greatly appreciated. Thanks
    I have attached my main VI and Sub VI
    Solved!
    Go to Solution.
    Attachments:
    main VI.jpg ‏116 KB
    Sub VI.jpg ‏242 KB

    LabVIEW program is based on DATA FLOW, now, until the subVI will finish execution (while loop will be stopped), the execution in Main VI will not proceed any further.
    If you can pass the reference of 'XY Graph' inside the subVI, you'll be able to update the plot (placed on MAIN VI) from within subVI.
    Find attached example for your reference.
    I am not allergic to Kudos, in fact I love Kudos.
     Make your LabVIEW experience more CONVENIENT.
    Attachments:
    Example [LV 90].zip ‏26 KB

  • HT4946 I need to print & back-up a series of abusive/threatening SMS (on iphone 5c) for my solicitor. Is there a way to do this which will show the time, date & sender info? How can I preserve (full) SMS data as evidence for future court proceedings?

    Does anyone know how to access sms text messages from iphone 5c backup from icloud or itunes? Apparently SMS can be restored so data I need must be stored in backup. I need to print a series of abusive/threatening SMS messages received on my iphone 5c from one sender. I need the time, date & whatever data is stored about source/sender of messages, as well as content. How can I access this data to create a chronological record of the abusive SMS messages and can I preserve the iphone's message log specifically-- so I can access records of these texts without having to restore a back-up? I need to do this to provide evidence for my solicitor and preserve that evidence for future court proceedings, thank you.

    http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CMr1..
    http://www.ecamm.com/mac/phoneview/

  • How do I set a custom time & date format in the top bar?

    Hello guys,
    Very embarassing question, because I've had Apple's for all of my life (starting with the original Apple Macintosh) but I still haven't figured out one thing
    How do I set a custom time & date format in the top bar?
    When I go to System Preferences > Language & Text > Formats I can set different formats. I have no idea where you will see these, but I know that it's not the top bar where the time and date is being displayed. Because no matter what I enter, the format in the top bar will stay the same. I can only choose things like 24-Hour clock or not, blinking dots and so on in the Time & Date settings from the System Preferences.
    Can anyone here point me in the right direction? I see you can even choose to display the week of the year - I'd love to do that!
    All help appreciated!
    Greetings

    Language & Text system preferences, Formats tab, customize dates.
    There are also many third party menu item utilities that can.  Search Macupdate.com for some.
    One search yielded iClock Pro.  Although I never used it I would think it allows customization.  The link I gave you is to the Macupdate download page for that app.  On that same page is a Similar Software section which has other apps that can do the same thing. 
    One listed is iStat Menus.  The primary use for iStat Menus is not for displaying date/time but it does do that.  And I know it can do what you want because I use iStat Menus to track temperature sensors n my machine and, like you, I want to customize the menu time/date.  So I use it instead of the apple clock.  It does have the customization features I think you are looking for.

  • How to count occurences of a certain string in incoming real-time data? Also displaying RTC data. Current VI included

    I use LabView student Express 7 on a Windows XP system.
    Time-frame: we are doing final integrations for our balloon experiment today. We just got told that the press wants to view real-time data, which we haven't programmed for. I need help to get a working VI at the latest by 25.02.2004 before 0800(morning) (GMT+1).
    Note on license
    It is a student balloon flight, and the data will not be used in scientific work, so the I am not breaking any license agreements (I hope).
    Problem synopsis:
    The balloon continually transmits data at 9600baud. The data is a semi-repeating header followed by a constant lenght data-package arranged like this:
    BEXUS[h][m][s]BEXUS[h][m][s]
    [Raw binary data, 7channels*8sub-channels*8bits]
    What the groundstation is doing right now:
    Take all incomming data and save (append) the data to a file without any data-handling. (We figured we would go post-processing).
    What I need to change in less than 24 hours:
    - Add a "package" counter
    - Add a display of the clock data (RTC)
    How I planned to implement the changes:
    -RTC display:
    The RTC data is in BCD format, since that means that if you look at the data as hex numbers, you get the hours and minutes and seconds out in "clear text". That is 12 hours is 0x12hex. I figured that I can do a match pattern BEXUS and pass the "after substring" to another match pattern BEXUS from which I feed the "before substring" to a type-cast VI (casting string to u8) and displaying that, which should give me a display of "123000" for the time 12:30:00... I couldn't get it to work at all when I tried out the supplied "beta" vi.
    - Package counter:
    Counting how many BEXUS that gets detected and dividing by 2. I don't know how to do this. I've looked on the forum (a good thread on the problem: "how do I count the number of *'s in a string") but these use either loops or arrays... and I'm not sure how this works when I'm getting the data in at realtime. I cant make an array and then count it, since then the array would grow fast and possibly interfere with saving of the data??? Saving the data is critical.. without that file we cant do post-processing.
    Since my time is so limited (I'm not even supposed to do the groundstation software but they called on me in the last minute because no-one else had time/wanted too/could do it) I hope that you could make an exception and provide me with working VI's (based on the one I have attached) so that I can show something to the press! (Free comercial for NI!! Since the student version shows the National Instruments water-mark on all VI's!!! Possible TV time!!)
    Thanks!
    PS: even if you are to late (after 25) post anyway!
    Why:
    -I can learn from it
    -the launch might be delayed due to weather conditions
    -others might find it amusing!
    Thanks again!
    Attachments:
    BexusII_groundstation.vi ‏46 KB

    I have a valid example data file attached to this thread.
    If you open BEXTEST.bin in a hex-editor of your choice, you'll see the BEXUS as 42 45 58 55 53 and then the time as 00 28 09 etc.
    I couldn't get Joe Guo's VI to work. It doesn't count packages correctly, and the time is not displayed correctly either.
    The file was saved using a straight save to file VI.
    The data is from actual launching area tests performed a few mintues ago. The time displayed is "On time" e.g. how long the gondola has been powered up.
    I have a spare T-junction, so I can hook into the balloon real-time data as we fly, in case anyone care to see if they can figure out why the latest version of Joe Guo's program is not displaying correctly.
    I will monitor this
    thread during and after flight to see if anyone can make it in time!
    Thanks for the great effort!!
    Attachments:
    bextest.bin ‏53 KB

  • Can I set up a Content Filter that is Time/Date stamp dependent?

    My company would like to add an additional disclaimer text during Holidays where the company is closed.  It will say something like: "In observance of the 'XYZ' holiday, our offices will be closing at 3:00 PM on Friday, December........ and will reopen at 8:30 AM Monday.......".
    I was wondering if there is a way to set up conditions in an Outgoing content filter to only include that text if the email is sent between certain dates.
    This would allow me to set up the filters prior to the holidays and not have to manage them manually.
    I tried to do it via Exchange Transport rule, but I can't find a time/date dependent condition for the rules in Exchange.
    Thanks,
    Rachel    

    Hi Rachel,
    there is no way to archive this directly in content filters, an indirect way would be to use a message filter that adds an additional header (i.e. X-mas: true) during a specific period. For that, message filters provide the 'date' rule, i.e
    HolidayHeader:
    if ((date > '12/20/2012 13:00:00') and
         (date < '12/28/2012 12:00:00'))
    insert-header('X-mas', 'TRUE');
    You'd then create an outbound content filter matching on this header and inserting the specific footer if the header exists. Or, of course, you could have that action in the message filter already, however in that case you need additional conditions to make sure the rule applies on outbound messages only.
    Hope that helps,
    Andreas

  • MRS (Multi Resource Scheduling) - Time Data

    Hi All,
    Is possible display in the planning board the time data confirmation from CATS?
    Is necessary to use some function to integrate this?
    Best Regards.
    Javier

    Hello Javier, this thread is already 2 Years old ... i have the same problem now. Have you solved this issue?
    Best regards, Thomas

  • Is it possible to create a shortcut for current time / date with iPhone native apps?

    is it possible to create a shortcut to insert the current time / date in a text such as a Note with iPhone (IOS 6) native apps (not a 3rd. party app)?
    By "shortcut" I mean a combination of characters, the same as under settings/general/keyboards/shortcuts.
    thanks.

    Code that does it is here:
    http://forum.java.sun.com/thread.jsp?forum=48&thread=453846&tstart=0&trange=15
    MOD

  • Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

    Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
    Thank you,
    Chuck
    Solved!
    Go to Solution.

    That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
    Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

  • Error "cannot load request real time data targets" for new cube in BI 7.

    Hi All,
    WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
    I am using BI 7.0 for first time and ahve the following issue:
    I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets". 
    I checked cube type in setting in infcune is shows as Standard.  When I doube clicked on error the following message showed up
    You are trying to load data into a real-time InfoCube using a DTP.
    This is only possible if the correct load settings have been defined for the InfoCube.
    Procedure
    In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
    I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
    Thanks
    KV

    Hi Kverma,
    Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
    Real Time data Target can be loaded With Data; Planning not allowed &
    Real Time data Target can be Planned; Data loading not allowed
    You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
    Regards,
    Kams

  • Error when activating Real Time Data Source

    Hi..
    I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
    I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
    I am on BI 7.0, with PI_BASIS: 2005_1_700.
    Please let me know if you need any further information.
    Thanks,
    Sai.

    Hi sai,
    Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
    am

  • Auto update of time/date in a table cell in pages

    I used to be able to do this in older versions.
    In pages when I have a table cell with time/date I would like to have the current date show up every time I open the document. Not on every date in the document, but just in a set cell in a  table.

    Hi Brian,
    Use the NOW function.
    Menu > Insert > Formula > Edit Formula
    Regards,
    Ian.

  • Creation of Daemon for the DTO  for the real time data aquisition

    Hi i need help how to create a daemon for the DTP in the real time data aquisition.i'm learning now Sap and practicing a lot to be professional but i need a bit of hel.Can you please give me some details how to create it?
    I have to access the RSRDA T-code and what i need to do after?

    Hi First of all you need to create a real time DTP once that is done go to RSRDA T-code and click on the Create Daemon
    and right click assign DTP , here you can assign the DTP once that is done save and execute . your Daemon will run
    Thanks
    Santosh

  • Detect if time/date browse button was used

    Hi,
    I have a position control vi for indexing elements inside array and displaying corresponding time and date. I have large number of control signals inside my block, but I have removed all irrelevant blocks and signal for this discussion. I have replaced all unnecessary controls with constant values, so don't waste time analyzing it.   
    If you take a look at my vi, you will see Star/Stop control, Position control and a time stamp indicator (Waveform time) with a time/date browse button from another time stamp control. I have all desired functionalities, but I have problem when using browse button for setting up time. I can't set my time two times in a row at same value because I'm comparing "Last entered time stamp" value with current one just entered. I would not like to completely change my blocks because I'm using a lot of property nodes and variables inside my project. I'm just looking for a way to figure out if time/date browse button has been pressed so I could jump to desired point in my recorded waveform.   
    Solved!
    Go to Solution.
    Attachments:
    position_control_lite.vi ‏16 KB

    I can't change Waveform Time Indicator to a Control because that would make other controls much complex (not shown in attached vi)
    I have modified my block to the simplest form. I have changed some control names.
    There is now only one problem - how can I detect if user has pressed time/date browse button? I'm not interested at this point which value has been entered.
    I need to replace User has entered value in  Jump to time/date with some kind of Boolean logic or event case.
    Message Edited by _thomas on 11-17-2009 09:23 AM
    Attachments:
    position_control_lite_lv8.6.vi ‏14 KB
    position_control_lite_lv8.0.vi ‏19 KB
    position_control.png ‏33 KB

Maybe you are looking for