Time/date error

I keep getting the following error message "Problem connecting please check time/date on your device and your internet connection".
I only get this error message when I try to play muliplayer on "Bike race".
This is happening on my iphone 4S (ios 6.1.2)
But, I have another iphone 4S and it works fine! The thing is it is really annoying me as I need it working on my personal phone as that is the phone I have unlocked lots of bikes!
I have been in touch with the app manufacturer over 10 times and I have not yet had any sort of reply!
Please can someone help me????
Thank you

try doing a hard restart/reboot if that fails back it up to you computer make sure its not a icloud backup but the one where all you information is stored on your computer and reset to factory defualt if this fails take it to your nearest apple store and see what thry say.

Similar Messages

  • Last boot time data error while collecting hardware inventory in SCCM for windows embedded devices.

    In our SCCM 2007 environment every day hardware inventory collects data about the last boot time and each time the data is incremented by 1 minute.
    This data has been collected from sql.
    Can anybody help me on this.
    Regard's
    Kanik Garg

    Hi Garth
    I checked the Time listed on client machine manually connecting through WMI. Check this
    Also I queried for the GS table.
    Name0                      LastBootUpTime0                             
    timestamp
    CA23251KVS02          2014-03-21 04:10:00.000           2014-04-28 05:36:50.000 
    Here I found that on every inventory the lastbootup time changes by 1 minute. And it is happening for 100's of devices.
    Any clue Why this is happening ?
    Kanik

  • Trapped! system preferences time date error

    I changed the date on my mac mini to 1987 by accident.
    The system preferences app is now locked.
    I have tried to use a sudo date in Terminal, however this requires password to complete command.  My administrator password is blank so it cant process this.
    I cant change my administrator password the usual way as this is done through system preferences which is also blocked (to access users and groups, as well as date/time settings)
    the system preferences box does open, but it gets stuck loading any of the icons so needs force quit
    (ive tried 32 bit enabled but didnt work)
    Help much appreciate Im completely trapped at present.
    Liam

    Start up in Recovery mode by holding down the key combination command-R at the chime.
    Select Get Help Online. Safari will launch. While in Recovery, you'll have no access to your bookmarks, but you won't need them. Load this web page.
    Triple-click anywhere in the line below to select it:
    date 0801000014
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Quit Safari. You'll be returned to the OS X Utilities screen.
    Select
              Utilities ▹ Terminal
    from the menu bar. A Terminal window will open. Paste into the window by pressing the key combination command-V.
    Wait for a new line ending in a dollar sign ($) to appear below what you entered. If it doesn't appear, press return.
    Quit Terminal to return to the main screen. Try the installation again.

  • ICal - Exchange time & date error

    Ever since the 10.7.x update corrected the "new event" error upon syncing with the Exchange server, I have been experiencing a new problem.
    Now when I enter events in iCal they sync to the server and other devices with different times. I can enter a meeting from 4-5pm on Monday and it will show up on a different day or for a time period spanning two days and it's never the correct starting time.
    Has anyone else seen this problem?
    or have any troubleshooting tips?
    I'm 10.7.3 iCal using Microsoft Office365 hosted exchange and an iPhone.
    Thanks very much,

    try doing a hard restart/reboot if that fails back it up to you computer make sure its not a icloud backup but the one where all you information is stored on your computer and reset to factory defualt if this fails take it to your nearest apple store and see what thry say.

  • Time/Date/Usage Stats Wonkiness?

    Hey, who says battery life is subpar? I'm showing 750 hours/31 days Usage!
    This "seems" to be related to the time/date errors that show up periodically. Not sure if it is related to syncing - I tend to leave iPhone on the "manual" time date setting and mil time hoping it will stick but apparently the phone will revert to automatic? Not sure on that but in any event what's the deal?

    Wow! and I thought mine had good battery life!
    The only time when my iPhone showed discrepancies in usage times was when switched it completely off for a couple of hours and powered it back on, usages times all of a sudden were higher then standby times.

  • Error "cannot load request real time data targets" for new cube in BI 7.

    Hi All,
    WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
    I am using BI 7.0 for first time and ahve the following issue:
    I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets". 
    I checked cube type in setting in infcune is shows as Standard.  When I doube clicked on error the following message showed up
    You are trying to load data into a real-time InfoCube using a DTP.
    This is only possible if the correct load settings have been defined for the InfoCube.
    Procedure
    In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
    I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
    Thanks
    KV

    Hi Kverma,
    Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
    Real Time data Target can be loaded With Data; Planning not allowed &
    Real Time data Target can be Planned; Data loading not allowed
    You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
    Regards,
    Kams

  • Error when activating Real Time Data Source

    Hi..
    I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
    I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
    I am on BI 7.0, with PI_BASIS: 2005_1_700.
    Please let me know if you need any further information.
    Thanks,
    Sai.

    Hi sai,
    Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
    am

  • I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David's MacBook Air.sparsebundle" is already in use.

    I have not been able to back up for2 days.  Time machine error message: /Volumes/Data/David’s MacBook Air.sparsebundle” is already in use.
    What now?
    Macbook Air.
    Was working fine for the past year until now.

    See more like this on the right.. this is the most common error reported here since mountain lion came out..
    Or read C12.. http://pondini.org/TM/Troubleshooting.html
    Or just restart the whole network.. in right order from off.. modem.. router / TC.. clients 2min gap.

  • HT3275 Time Machine Error: The backup disk image "Volumes/Data/My Macbook Pro.sparsebundle" is already in use. (How do I correct this issue?)

    Time Machine did not back up:
    Time Machine Error; ("The backup disk image "/Volumes/Data/My MacBook Pro.sparsebundle" is already in use.")
    How do I correct this issue?
    Thanks!

    You need to be careful Bob.. people might take this literally.
    Bob Timmons wrote:
    How do I correct this issue?
    Call the exterminator to get rid of the bugs in Lion and Mountain Lion.
    https://discussions.apple.com/thread/5222487?tstart=0

  • I am running 10.7.5 and getting Time Machine error The backup disk image "/Volumes/Data/Kathy P's MacBook.sparsebundle" is already in use. what do i do now?

    i am running 10.7.5 on an older MacBook and getting Time Machine error The backup disk image “/Volumes/Data/Kathy P’s MacBook.sparsebundle” is already in use. what do i do now?

    See Pondini's TM FAQs, for starters.

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • Time Stamp Error: Cannot display system date and time. My VI display "YYYY-MM-DD" instead of "2014-08-02".

    Hi All,
    I am using Labview8.5 and Windows XP OS.
    My Problem is my Labview TimeStamp cannot display current system date and time.
    Please see my attachment for the screentshot.
    The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of  "2014-08-02".
    I tried other computer machine and it works. There are some computer machine has this problem.
    How can I resolve this issue? Please advice. Thanks.
    Best Thanks,
    Jessie
    Attachments:
    Time Stamp error.JPG ‏68 KB

    Bill,
    reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
    What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
    Nevertheless, it seems like systematic error. Connected to specific machines.
    What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
    Most obvious reasons would be:
    - Language settings (possibly the infamous "dot-comma-issue")
    - Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
    - Missing hotfixes for Win and LV
    - Is the system running as virtual machine vs. "native"?
    Not so obvious differences:
    - Specific CPU type
    - Motherboard/BIOS
    - LV ini settings
    There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • Error: 0271: Real Time Clock Error - Check Date and Time settings.

    Hello all,
    I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
    Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
    Any advice would be appreciated.

    Thanks to everyone for the help.  Just want to close this out.  I had a IBM/Lenovo technician here today and he replaced the CMOS battery.  Upon the change, the computer is fine being reconnected to the dock (the three times I tried it).  So it has been resolved with the battery.  Surprised by the incompatibility claim because I am not having issues now.  Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
    Thanks!

  • Data record with time interval error

    Hi,
    I have come across the following error.
    Data record with Time interval error and data is getting loaded into data target and no PSA in between.
    thanks
    kris

    Hi Kris,
    Could you please explain your problem little bit more. I mean what is source and target, or you using IP or DTP.
    goto the details in monitor tab, you will come to know to which record yo uhave error.
    If you are running IP, it is recommended to keep PSA.
    Regards,
    Venkatesh

  • Error when trying to enter time data for hourly employees using CAT2

    Hi Experts!
    I'm trying to enter time data for an absence type using CAT2 for hourly employees and it's giving me an error saying "for attendance type, function or/and one of the URA is required".
    I'm not sure what that means, the system has no functions available. Entering time data for full-time salaried employees is working just fine.
    Any insight would be greatly appreciated!
    Thanks.

    hI,
    Firstly check infotype 0315
    In that check sender cost centre
    Next chek whether the Attendent / Absende Tyep which you are trying to enter is configured
    That meas it should pop up (F4) when u try to enter using CAT2
    in the Attnendence /Abence field
    REWARD POINTS

Maybe you are looking for