Time/date issues

when i sync my ipod touch (2nd gen) to my computer, using the newest itunes, it messes up the time and date to a random time and date (usually inside a month). what is it? please help.

loads of people are having this problem.
you can avoid it by closing itunes, then plugging in your ipod, then opening itunes again

Similar Messages

Has anyone with sprint have time/date issues as well as imessage function automatically turning itself off?

has anyone with sprint had time/date issues as well as imessage function automatically turn itself off?

Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged.
What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

Dynamic load vs time data issue

Let me start off by saying that I am very new to labview...
I am tryng to gather data from a load cell. I can see the force plot on my front panel and can set it to display time & date on the x axis, but my problem lies in extracting that data to a file.
The .lvm file I save to successfully shows the force values in the second column, but gives me all zeroes in the first column, i.e. I don't get any time output.
Any help in this matter would be greatly appreciated!
Saba
Attachments:
load cell.vi ‏61 KB

Hi Saba,
Have you tried writing to a spreadsheet or text file with tab-delimited output. The examples for writing to a spreadsheet are there in the Fle IO section of Example Finder in LabVIEW. Hope this helps!
Ipshita C.
National Instruments
Applications Engineer

EXIF date and time data issues

I have several thousand images shot during the same trip, on two different cameras. The date and on one of the cameras was not correct. I corrected the date on the images using PhotoInfo 2.0.1
The problem is that Bridge CS3 is not recognizing the new date on all of the images. Most of the images show and can be sorted in Bridge by the new, correct date. However, any image that I altered in Bridge (rotated, cropped, opened in ACR, rated, etc...) prior to correcting the date in PhotoInfo is not showing the new, corrected date in Bridge.
Has anyone else experienced this problem?
Anyone know of a solution?
I have been struggling with this issue for quite a while so any input will be greatly appreciated!
Thanks.

Hi,
I have the exact same problem - corrected the EXIF date and time and still wrong sorting. The thing is that Bridge sorts the files by "Creation Date", the date and time you also see in the Finder. So I found an application that can change that, too. But still Bridge sorts the files in the wrong order! Displays the old time, too.
After several times of emptying the cache, sorting is now ALL messed up (without any kind of logic), I don't know how to fix it.
Regards,
Charles

Time/date issue?

I purchased an indigo crt 500mhz iMac off ebay and when going over it, have found that the comp tells me the date/time is stuck at March 24, 2001. I've tried to reset it twice but it continues. Is this an indication of a battery problem?

Almost certainly a PRAM battery issue on a Mac of that age. But that's an odd date; it's usually it's older.
mrtotes

Time/Date issues with iCal/Mail

For some reason, the time in Mail is always 9:00 a.m. (if it's the a.m) or 9:00 p.m (if it's the p.m) ever since I bought the mac. So if I receive an email at 11:54 a.m., it will say 9:00 a.m..
For iCal, all events are placed in the same fashion (9AM or 9PM), but in the details in the New Event window, it will say TH:00 a.m. (when the day is Thursday) for the time instead of 11:54 a.m. for example.
Has anyone ever seen this craziness before? (once again, it has been like this since I bought the mac)
MacBook1,1 Mac OS X (10.4.8)

I have almost the same problem. The dates are correct, but the time is 9:29 am for all mail, ical events, and for all file times in the finder. There are some other problems as well, like in ical, week view, there are not times displayed on the left, but rather "Sat" before "AM" or "PM," and "Noon" is correct.

LG Octane Camera Date/Time Stamp Issues

The pics I take with my LG Octane are designated a number associated with the date/time the pic was taken (ex 0401121345, would be April 1, 2012 at 145pm). When I transfer the pics from my phones memory card to my computer and open the pics, I can see the pics info (date/time) and everything seems correct.
The problem comes in when I load my pics onto a website that verifies the pics date/time thru the digital encoding on the pics file. (Digital Pics are encoded with date/time stamps that can be recognized with computer software). This website rejects my submitted pics from my LG Octane because this encoding is either not there or not set correctly. I had no issue previously when using my Samsung env last year. Please Help!

I take it you are noticing that the photo shows in your gallery with the correct time for the name. But, when you look at the photos on your computer it is showing a time so many hours off (ie. phone shows 12:00 and computer shows 4:00). What it is actually doing is time stamping it for GMT for some reason. This has been a problem for as long as I know. I have not found an answer and have come to believe there is not a way of changing the time/date stamp on the phone. I have not even found an app for it.
Sorry I don't have an answer. But, maybe some one else will.

Tell me what is ******* going on!!!????! The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!

The time and date issues!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Every times I went to Apple store, the phone automatically works good time, but when I came back, my phone is working very slow with wrong time!
I want to get a new iPhone to replace this defective phone. I am gonna be crazzzzzzzyyyyyyyy with anger,!!!,!,,,! I takes2 hours to go to Regent street apple stores for three times!!!!!. It is a lot of transport fees !
PLz tell me why! How to deal with it !

Unless it's confirmed officially that your phone is defective, then you can ask for a replacement. Or you have to live with you. However you can trade it for a new one if you don't care the price drop.

Issue with time/date change.

Hello,
I'm having issues after changing the time/date zone settings, after I change the time zone (new setting), apperently it is correctly saved while exit (it prompts), but when I return to see the time/date settings once again, the timezone remains the same as the old setting.
I've tried by changing the source type: Blackberry, Network or Off but its the same.
What can i do to solve this? firmware update?
Thanks in advance,
Regards.

Ok, I was at the Apple Genius Bar yesterday, and among other things to address my frequent beachball concerns, the Genius repaired disk permissions and reset network settings.
I checked the automagic time/date/time zone settings, and it worked perfectly.
I get home, and the MacBook thinks I'm back in Rexford, Idaho again, throwing off my time zone and time. Argh!

Issues while transfering time data (CATSDB) to HR infotypes

We need to allow transfer (CATSDB) of 'time data' to infotypes using
program RPTEXTPT by users .
( RPTEXTPT : Transfer time data to HR TM )
Some of the users do not have authorization to maintain infotype 2001 /2002/ 2003 via PA30 .
So, the program RPTEXTPT could not be used to transfer data to these infotypes .
How to supress authorization check so that program RPTEXTPT can be used ?
Appreciate the help.
Thank you .

Hi Rohan,
The users who are running RPTEXTPT/CAT6 and does not have authorizantion to create infotype 2001 /2002/ 2003 can take help of background job to create the infotype.
1. You need to create a Non dialog user with authorization to create infotype 2001 /2002/ 2003. Take basis people help.
2. Use the user name in SM36 while scheduling the batch job.
Let me know if you need any further info.
Br/Manas

I think I solved my time changing issues- hope this helps

Hey everyone, I think I've had some success with my time changing issues. I originally posted this to another user as a follow up to her question, but I'm reposting it here. Hope it helps:
"msteinny,
So i went to the apple store to meet with an apple genius to ask him why my phone's time kept moving up 1 hour everytime I synced my phone. Well he said that he's never seen this problem before, and after a trying a reset and restore he let me exchange my phone. The problem is that when I went to sync my new phone the problem still persisted. They told me it was probably something to do with my computer and its time zone settings.
So I get home and click on my computers clock in the bottom right hand corner to bring up the date and time properties and sure enought my time is correct, the date is correct and the time zone is correct (Eastern Daylight Time). So I look through the different tabs (Date & Time, Time Zone, Internet Time). The first thing I tried to do was to change where my computer syncs its internet time. It was originaly set on NIST time. I then switched it to Windows time, but this didn't do anything. My clock would still change when I synced to itunes. The next thing I tried was fideling around in the Time Zone tabs. I noticed that the box that says "Automatically adjust clock for daylight savings" was unchecked, so I checked it and my computer's time jumped an hour ahead. So I left the box checked but moved my clock one hour back (to the correct time), clicked on apply and left it at that. I synced my iPhone and voila! The time didn't change! It stayed on the correct time! To to make a long story short, make sure that you computer's clock is set on "automatically adjust clock for daylight savings changes, make sure your time zone is correct, and that the time is right when that box is checked. I hope this helps you. I'm glad I got a new phone out of the deal;)
Chris P. "

As I mentioned in my post, whenever I checked that box the time would be incorrect. It would move up an hour. I've messed with this along time ago, way before I got my iphone. I think this had something to do with the daylight savings change that was implemented this year or last year. I dont remember if I never tried correcting it before, or if I couldn't, but this time I didn't have any problems correcting it. Anyway, since I couldn't correct it back then, I just left the box uncheck and decided that I would change the time manually when the next time change occurs. But it seems to work fine now so all is well.

Consistent Data Issues Even After Replacement

I don't know whether to blame the phone or the ice cream sandwich update for all the problems I have been having with my RAZR. When I first got it six months ago it was great and I loved it now after the ice cream sandwich update I dont really like it anymore. I never had any sort of issues while using it on gingerbread. Today, I have seen my phone switch constantly between 3g and 4g more times than I can count over the course of half an hour. I couldn't even get a consistent signal to watch a 3 minute youtube clip.
First off, I updated it to ICS but first wiped the phone clean including cache, etc. So it would have basically been a clean install. Now, I have certain issues. The 4g and 3g switch is terrible. On the street and in my own house I have had the same thing happen. In my house I get anywhere from 3-5 bars of 4g but it still switches over to 4 bars of 3g. I have even seen it switch from 4g to 3g when I had full bars. I have already replaced the sim cards, but I am still having these issues. It's actually happening on all 4 of my RAZRs on my family plan. I have gone through the network resets where I pull out the sim card and for 30 seconds, insert it, power on the phone, etc. I went through all 4 of them with the Rep over the phone. I have also had several instances where I did not have data but signal bars and then I didn't have absolutely anything at all. I live in a "major" city metro area, Boston, and I can't believe I am having these problems.
At first I would have gone off and blamed Verizon, but it is definitely not Verizon, it is our phones that are terrible. I can confirm this because my brother uses an ipad (4g Verizon) on a separate account and he consistently maintains 4g even though I have seen it go as low as two bars. Yes, I understand the ipad is a different device and may have a different radio, but that is exactly how our phones used to work on gingerbread. I received a replacement device and I am still having the same issues. Also, the headset speaker, not the speaker on the back, or receiver is really tinny during phone calls even with the in call volume down half way. It is really annoying and the little tone that plays after hanging up makes the speaker sound like its about to blow out. I don't know what to do if the RAZR will keep having data issues because this is absolutely ridiculous. I know i'm not entitled to anything but for $310 a month I mean come on, I just want my phone to work properly. As I am typing this now, I have witnessed my phone switch between 4g, 3g, and no signal at least 5 times and of course my brother's iPad on Verizon has kept its 4g signal.

Thanks for all the suggestions, but they just don't work at all guys. I've even tried that restore connectivity app from Motorola, but of course it didn't work. I don't like that I keep having constant switches between 3g,4g, and no signal bars. It's awful thats just what it is. I feel like I got gipped with this update promising better user experience. If the darned thing can't connect to their network, then what is Verizon doing to address these issues? Every time I try to do something "data intensive" (i.e. youtube, facebook, twitter, etc) the data signal just drops and I'm either left with gray bars and no data or no signal bars whatsoever. Also one thing that annoys me to death with this phone is that I have it sitting in my pocket after I lock the screen and I go to pull it out of my otherwise empty pocket. The screen is turned on by itself (I have the clear silicon case on it so the power button shouldn't be pressed by itself and no I don't wear skinny jeans), its got 3g and no bars, and its piping hot.
WHAT IS WRONG WITH THIS PHONE VERIZON???!!!

MRS (Multi Resource Scheduling) - Time Data

Hi All,
Is possible display in the planning board the time data confirmation from CATS?
Is necessary to use some function to integrate this?
Best Regards.
Javier

Hello Javier, this thread is already 2 Years old ... i have the same problem now. Have you solved this issue?
Best regards, Thomas

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Verizon mades changes in the coding and now Windows Phone 7 is having data issues!!!

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Starting about 3 weeks ago, I stopped receiving text messages and even worse stopped receiving calls yet alone my voicemails. I have changed not one thing to my phone, everything is exactly the way it was before the issues arised. Now I have to trick my phone to receive my data by dialing into my voicemail... And then what do you know, 30 text mesages, 12 voicemails!!!
The voicemails wont even tell you the date or time stamp (the time the voicemail was received). After numerous *228 and talking with level 2 over the holidays, I see a huge article on multiple news sites stating Verizon is having data issues... Dropped calls, loss of data, no signal while all our phone keep showing full bars and 3g. Verizon stated its only happening on there 4gLTE system and not 3G but thats a load of crap.
All one has to do is a google search of loss of text messages or voicemails on Verizon and you will see 100's up to 1000's of users like you and me all experiencing the same issues. And not just with Windows Phone 7, but with there baby Driod and iPhone as well.
What really ****** me off is that Verizon loves to play the blame game or pass the buck game. Hard Reset your phone and that will solve the problem... Yeah Right. If this was our OS and we updated a driver that changed the OS in the background I can see that being the solution. But for the 100's or 1000's of users that go to work daily, check there emails and text daily, and haven't changed one thing on the phone... THIS IS UNACCEPTABLE!!!
Now I read an articile for someone extermely close to Microsoft stating that Verizon turned down Nokia's new 4GLTE phone because they have no faith in the operating system and I have to think that maybe behind the scenes Verizon is trying to force us off Windows Phone 7 platform with data issue behind the scene and try to get us all into the Droid Platform which they make 50% of the cash off the phone just like the iPhone...
This is a joke, and I am really starting to think about going to ATT and getting the HTC Titan or the new Nokia 900. I have already research a 3 party app that will allow you to backup and restore your phone. And just read that Microsoft just put out an ad for backup, restore and cloud backup programmers for this latest feature.
Verizon the games need to stop, Verizon you need to stand behind this Platform, Verizon you need to provide better service for all us 3G users!!!
TheJester77

Time/date issues

Similar Messages

Maybe you are looking for