Time difference issue between actual and system internal time..

Hi,
We have PCCE v9.0.3 running in our network.
We see time difference of mor than 30 minutes between CUIC reports and SQL quries output for the calls.
I checked system time for all components along with NTP source, all good.However the RTTEST and PROCMON utilities STATUS command output shows the local time is behind actual time.
I have attached the snapshot of this.
Thanks!

Not exactly true:
User SYS is the owner of the data dictionary. In fact, SYS is the owner of the entrire structure of the database. The datadictionary is stored in the SYS-schema (a user = a schema)
SYSTEM is an account with many privileges and is used as an administrator account. SYSTEM owns some objects, but not the data dictionary
The tablespace SYSTEM is the tablespace in which the SYS schema (and SYSTEM schema as well) is stored. The names of the SYSTEM account and SYSTEM tablespace have nothing to do with each other, not as far as I know anyway

Similar Messages

I want to find the difference(duration) between logon and logoff time?

i want to find the difference(duration) between logon and logoff time of below table?
can any one tell the query to find using self join?
USR     LOGON_TIME     LOGOFF_TIME
HR     31-AUG-04 03.04.04.000000 AM     -
HR     - 31-AUG-04 03.04.14.000000 AM
Edited by: 794244 on Nov 1, 2010 10:47 PM

No selfjoin, just analytical functions.
CREATE TABLe log_time
(username varchar(20),
LOGON_TIME timestamp,
LOGOFF_TIME timestamp);
insert into log_time (username,LOGON_TIME,LOGOFF_TIME) values ('HR',sysdate,null);
insert into log_time (username,LOGON_TIME,LOGOFF_TIME) values ('HR',null,sysdate+1/38);
insert into log_time (username,LOGON_TIME,LOGOFF_TIME) values ('HR',sysdate+2,null);
insert into log_time (username,LOGON_TIME,LOGOFF_TIME) values ('HR',null,sysdate+2+14/20);
commit;
SELECT username,logon_time,logoff_time, my_logoff_time, my_logoff_time -logon_time,
       time_to_sort
FROM (
        SELECT username,logon_time, logoff_time,
               LEAD(logoff_time,1,logon_time) OVER (PARTITION BY username ORDER BY time_to_sort) my_logoff_time,
               time_to_sort
        FROM (SELECT username,logon_time,logoff_time,NVL(logon_time,logoff_time) time_to_sort
              FROM log_time)
where LOGON_TIME is not null
ORDER BY time_to_sort;
USERNAME     LOGON_TIME     LOGOFF_TIME     MY_LOGOFF_TIME     MY_LOGOFF_TIME-LOGON_TIME     TIME_TO_SORT
HR     02.11.10 11:34:56.000000000          02.11.10 12:12:50.000000000     0 0:37:54.0     02.11.10 11:34:56.000000000
HR     04.11.10 11:34:56.000000000          05.11.10 04:22:56.000000000     0 16:48:0.0     04.11.10 11:34:56.000000000But, if that code which fills that table should better UPDATE than INSERT. You can cover much more issues. (e.g the DB crashes and you get 2 logon but no logoff in a sequence and.....)
-- andy

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

Differences Between Object And System Privileges

Hi,
Whats the difference between object and system privileges in oracle?
Cheers
Paul

System Privileges
A system privilege is the right to perform a particular action, or to perform an action on any schema objects of a particular type. For example, the privileges to create tablespaces and to delete the rows of any table in a database are system privileges.
Schema Object Privileges
A schema object privilege is a privilege or right to perform a particular action on a specific schema object:
For example, the privilege to delete rows from the departments table is an object privilege.
Some schema objects, such as clusters, indexes, triggers, and database links, do not have associated object privileges. Their use is controlled with system privileges. For example, to alter a cluster, a user must own the cluster or have the ALTER ANY CLUSTER system privilege.
A schema object and its synonym are equivalent with respect to privileges. That is, the object privileges granted for a table, view, sequence, procedure, function, or package apply whether referencing the base object by name or using a synonym.
Granting object privileges on a table, view, sequence, procedure, function, or package to a synonym for the object has the same effect as if no synonym were used. When a synonym is dropped, all grants for the underlying schema object remain in effect, even if the privileges were granted by specifying the dropped synonym.

Difference between SYS and SYSTEM user

Hi,
Well, one of my colleagues have asked me the difference between SYS and SYSTEM user .. Normally these are the users which will be under the monitoring of the DBA .. So, how could I know the difference between these two users ..
Please assist me
Regards

SYS is the owner of the database and the owner of the data dictionary.
The objects belonging to SYS cannot be exported. But SYS has the SYSDBA privilege which SYSTEM doesn't.
SYSTEM is a privileged administration user, and typically owns Oracle provided tables other than the dictionary.
SYSDBA is not a role, it is a privilege. You'll find it in system_privilege_map, not in dba_roles.

Difference in between J1IH and J1IS

Dear Gurus,
I know that J1IH is used JV posting for excise invoices.
And for J1IS we create the excise invoice and release account posting in J1IV.
I want to know what is the basic difference in between J1IH and J1IS, though in both cases we capture and post the excises. Please suggest with some couples of examples.
Regards,
Shyam

Hi,
J1IH is used to post the Excise JV.
Use: - You use these functions if you need to make an adjustment posting to any of your CENVAT accounts. You can make adjustment postings to account for:
- Scrap
- Materials that you have not used in production
- Additional excise paid by vendors
- Money that you have transferred to your personal ledger account
- Other transactions
- You can also use this function to cancel excise invoices -out going excise invoices.
J1IS is used to create the excise invoice for other movements like Subcontracting & Stock transfer order.
Can i use J1IH for canceling vendor excise invoice, the one I captured in J1IEX
You can refer below link more detail,
[J1IH & J1IS|J1IH and J1IS]
Edited by: tej yadav on Feb 3, 2012 1:29 PM

Difference/relationship between XML and XSD

Hi All,
Correct me if i am wrong,
When we create a source and a target datatype in IR automatically objects will be created in XSD.
The same way it does when we create message type.
In message mapping, We map source and target message type and when we test with sample data, we can view source and target in xml
My question is what is the difference/relationship between XML and XSD ?
Thanks,
ss

Hi,
XML (Extensible Markup Language) is a W3C initiative that allows information and services to be encoded with meaningful structure and semantics that computers and humans can understand. XML is great for information exchange, and can easily be extended to include user-specified and industry-specified tags.
Whereas
An XML Schema Definition (XSD) is an instance of an XML schema written in the XML Schema language. An XSD defines a type of XML document in terms of constraints upon what elements and attributes may appear, their relationship to each other, what types of data may be in them, and other things. It can be used with validation software in order to ascertain whether a particular XML document is of that type, and to produce a Post-Schema Validation Infoset.
I hope this clarifies.
Regards.
Praveen

Compatibility issues between R12 and report builder 2.5

Hi,
I just want to know if there are issues between R12 and (Forms 4.5 and Reports 2.5)? I have been using 6i since I started in the oracle so I'm a little new to this.
Thanks
peopsquik

As my understanding there is no issue for Forms 4.5 and Reports 2.5 with R12.
You can develop report with Report 6i can be deployed with R12.You cannot use Forms 4.5, Reports 2.5 or Developer (Forms/Reports) 6i with Oracle EBs R12 as it is not certified. The only supported version is Developer 10g
Using the OracleAS 10.1.2 Forms and Reports Builders with Oracle Applications Release 12 [ID 444248.1]
Thanks,
Hussein

What is the difference/comparison between AppRf and WebCC ?

Q: What is the difference/comparison between AppRf and WebCC ?
A:
Comparison between AppRf and WebCC:
AppRF
WebCC
2300+ Apps under 21 app categories
Millions of URLs under 80+ categories
Need up to 7 packets to classify
Classified once HTTP GET is received
Classification
Classification + Reputation
Need AOS upgrade to get new Apps
Dynamic update of WebCC database
Static content based classification
Dynamic content based categorization / reputation

Or put another way:
Albums organise Photos
Folders organise Albums
A Photo cannot be in a Folder, only in an Album.

Difference(s) between Fieldpoint and RIO?

Hello,
I am pretty new to to PACs. I am finding it really hard to find the difference(s) between cFP and RIO. Where should i choose cFP over RIO?
Some kind of practical comparison here shall be highly appreciated.
Regards,

Hi Mirza,
Your specific application is going to determine which equipment is best. I found a couple of online presentations about CompactRIO and FieldPoint which should provide you with more insight about the functionality of each product:
CompactRIO Presentation
FieldPoint Presentation
Also, here are the links to the product pages for FieldPoint and CompactRIO. I hope that you find this information helpful.
Regards,
Hal L.

Capturing the difference between Actual and planned time

Hii...
I have created and released a production order which contains 25 operations and qty: 3 nos. I have done operation confirmation for 0010 operation as 2.5 hours (where as planned time is 1.5 hours). I would like to know how to get a report which can show the difference between actual & planned times.
And also I would like to know the operation time 1.5 hours which entered ny me was for operation of 1 number qty or its for 3 quantities.
Best regards,
Haneesh R

>
Haneesh Ramisetty wrote:
>
>
> "Order quantity is 3 Nos and operation time is 1.5 hours (for 1 qty). But in routing I have entered for the 0010 operation as 1.5 hours, my doubt is, how system will consider, time 1.5 hours is time for operation of 1 number qty or its for 3 quantities."
>
>
>
if you maintained in routing 1 qty = 1.5 hrs, when you create production order qty 3 = 3 * 1.5 hrs so total 4.5 hrs for that operation 0010 to completed
regards,
sankaran

Difference between Communication and System User

Hello All,
I would like to know the difference between the Communication User and System User.
Definition wise, Yes, I know what they are for?
But My doubt is, why do we need a communication user type for RFC connections when we can use a System user.
Why did SAP designed these two types of users?

It's okay in my books for people to experience the internet as it is and not the way it was individually intended
SU01Solution already solved the problem actually, but there are some very fine peripheral differences still between the user types.
That is why asking a specific question and discussing it's merits / pro's and con's is the best approach and SAP also benefits from it.
Another obvious difference if you do a simple search is that SYSTEM type users cannot issue SAP logon tickets.
There are a few more but as I said these are peripheral and very use-case dependent... so SU01Solution needs to ask a proper and realistic question.
ps: ST01 is not the answer here either...
Cheers,
Julius

HT1178 What the difference is between WPA and WPA2 and how are these settings affecting the access of other computers to the internet through my Time Capsule

I have a Time Capsule of the 4th generation and I am pretty impressed since I just had a fried harddrive on my 3 month old Imac and Time Capsule restored it fully including all programs etc. without having me to put in all serial numbers etc. for that I give it an A+. However what I find very frustrating is the very short and incomplete user manual and setup instructions. I give those a D-. It does not explain the consequences of certain choices to a normel non computer gig user like me:
I do not understand what the consequences and difference is between the security setting WPA/WPA2 and WPA2 when setting it up. It would be helpful if the manual would explain something like: If you set it onto WPA2 then computers older than XXX years will not able to hook up to the internet through your router...or the likes, since I slowly supect this may be the reason for some of my troubles.
I also have a 5 year old PC with vista connected to the Time Capsule. It can wireless connect to the Time Capsule and access the printer (I have managed that after some painful hours...) but it cannot access the internet with that PC through the timecapsule wireless, only if I hook it up with a cable. Why? Does that have to do with the fact that I have set the TIme Capsule to WPA2?
Our PS3 can connect wireless, no problem. However, I friend of mine tried it with a quite new Toshiba Notebook and he could see the Time Capsule but again it shows the line from the Time Capsule to the internet blocked. All other computers linked with data cable to the Time Capsule are connected to the internet no problem. What have we done wrong? Should I change the security setting to WPA/WPA2?
I tried the latter, but then another problem does come up, which was there from beginning on: When I change the settings for my Time Capsule my Imac suddenly cannot find the Timne Capsule anymore, even so I am only 3feet away from it. When I set it up for the first time 3 month ago it drove me crazy. The very first time it found the Time Capsule right away. But when I discuverd a mistake in my initial setup and I went through the settings again to change stuff it suddenly could not find the Time Capsule anymore. Only after frustrating 20 times or so with turning wi-fi on and off several times inbetween did it suddenly find the Time Capsule in the set up menu. However, when I tried changing my security setting to WPA/WPA2 today to see whether this solves my other problems again it could not find the Time Capsule when I was finished with the settings and I had to give up/cancel. Why is that???
I would really appreciate some help here. But please I am not a computer gig and normally always had assistance with these things. On the other hand I am not all stupid either (even so these manuals assuming we all grew up sleeping on a computer make me feel stupid).....
Thank you all in advance

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

Difference Between Physical and System Stock.

Hi Gurus,
I am facing a problem in Executing One Scenario.
Actually we have one Raw Material which contains a "Moisture Contain" Half it own weight.
When we are procuring it, we do it as it is i.e. including the weight of Moisture.
But when we are issuing it for production the scenario is like,
Suppose we require 10 Kg of that Raw Material for 5 Kg of finished product.
Physically we are Isuuing 10 Kg, But in system we are Issuing it as 5 Kg only (i.e "Excluding the Moisture Content of 5 Kg").
But beacuse of this there is a variation in Physical and System Stock.
How to aviod this Variation in Stock?
Please Help.........
Thanks in Advance.

HI
Maintain the moisture content in Component scrap in MRP4 and do all the calculation on dry basis only for FG.
also while procuring the item system will calculate PR qty including the moisture content.
Check with your MM consultant.
Regards
Anupam Sharma

A big issue between LR2 and PSE6?

Hello;
Im experiencing a strange situation between PSE6 and LR2. What about to tell you it happens to me twice, so I was able to recreate and document the issue. Before I go on I want to warn you that the only way to fix it was uninstalling and installing PSE6. The repair process did not work.
Before I describe and specify the Test Script I want to describe my system:
Vista Home Premium SP1, PSE6 and the 30 day trial of LR2.
Processor: Dual 2.89 MHz, 4GB of RAM, 512MB ATI Graphic Card
2 Internal HD; 250 GB and 650 GB
1 External HD 500GB.
Description: After I edited a RAW picture in PSE and saved as PSD I closed PSE6 and went to LR2 to continue editing, then after some editing in LR2 I decide to do more editing in PSE6 from LR2. I closed PSE6 and get back to LR2. I opened PSE6 from the Desktop and went to the Organizer-Edit-Preferences and BOOM; I get the message Adobe Photoshop Elements 6.0 (Organizer) has stopped working CLOSE THE PROGRAM.
Test Script:
WARNING: If you decide to go on and test this I want to warn you that both times I had to uninstall and install PSE6.
1. Edit a RAW picture in PSE6 and saved as PSD, exit PSE6.
2. Edit the same PSD picture in LR2, do anything you want.
3. Edit the PSD picture in PSE6 directly from LR2: Develop->Photo->Edit in PSE6.
4. Chose the Default Option: Edit a Copy with Lightroom Adjustments
5. When in PSE6 do anything or nothing to the picture and CLOSE exit from PSE6.
6. Start PSE6 and from the Organizer go to EDIT->Preferences and chose General
7. Now, if the problem its repeatable and its not only me you should get the message that the Organizer has Stopped working and you must have to close the program.
Organizer has Stopped working and you must have to close the program.
8. Since everytime that I tried to get into the Preferences PSE6 Crash I had to unistalled and installed again, I try to do the repair but in my case did not work.
Note: I don't know if the same it's going to happen with JPG's or TIFF's, at least I don't want to test it.
If somebody has any comments or knowledge about this please let me know. For now my Trial of LR2 has come to a stop.
Thanks in advance.

Hello Antonio;
After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

Time difference issue between actual and system internal time..

Similar Messages

Maybe you are looking for